Someone please help me regarding synching for first time but with lots of apps on the iPad

Hi, when I bought my iPad2 it was booted in the store, and since then I never connected to a computer, how do I now sync to my PC without losing all the apps I paid for? Please help, thanks.

Authorize your computer for iTunes content - launch iTunes and go to Store>Authorize this computer. Make sure that you are signed into your iTunes account on the computer as well. If you are already authorized and have been using iTunes on your PC you are good to go.
I copied this from another discussion. If you follow these steps you should be fine - for all of your purchased content.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
That should do it.

Similar Messages

  • SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    Please turn off your caps lock.
    See http://support.apple.com/kb/HT1212.

  • Can someone please help - I want to sync my icloud calendar with my iphone calendar.  All of my entries from previous months are on my icloud calendar but not my iphone.  How do I get them back on there?

    Can someone please help - I want to sync my icloud calendar with my iphone calendar.  All of my entries from previous months are on my icloud calendar but not my iphone.  How do I get them back on there?  I have corrected my settings for future entries (I think/hope) but want to put the old stuff back on.

    Try this...
    Settings > Mail, Contact, Calendars.  Scroll down to Calendars and set "Sync" as desired.

  • TS1368 I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

    I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

    I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

  • How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes?  I need step by step instructions for first-time sync with ipad mini.  Thanks.

    How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes?  I need step by step instructions for first-time sync with ipad mini.  Thanks.

    If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
    First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
    Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
    That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
    http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

  • HT5312 I'm trying to buy iTunes for first time, but can't verify security questions.

    I'm trying to buy iTunes for first time and can't answer security questions.
    <Personal Information Edited by Host>

    The page that you posted from has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset (these are user-to-user forums).
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • Hi all please help me regarding mbspatch1 for se11 and se16

    hi all sap guru's,
              need a very urgent help from you all.hop you all will give a solution.
    i have installed sap 4.6d minisap that comes with abap objects bookks in my system.my os is windows 2000 prof.
    - If i use transactions SE11 or SE16 to display table contents (e.g. Table SPFL1)
    i receive the error message "No changes on SAP objects allowed".
    - Access to the F1S logical database causes syntax errors because the DBF1SF01 include is missing.
    it has been given to follow a procedure in mbspatch1 zip file.
    but when i try to use the patch for se16, se11 and log data base receive I the following error 4 ETW000....R3trans.exe version 6.05 (release 46D - 04,10,00 - 09:16:00).  4 ETW000 =============================================== 4 ETW000 4 ETW000 control file:  < NO CTRL file > 4 ETW000 date&time:  23.01.2003 - 19:43:15 ÈETW169 NO connect possible:  "connect failed with DBLI_RC_LOAD_LIB_FAILED."

    Hi Pandu,
    I hope this is Installation Problem or Problem with Frontend GUI . try to apply the patches...
    regards
    vijay
    Message was edited by: Vijay Babu Dudla

  • Dropdown Box in WAD (Please help me as i posted many times,but no infos)

    Hello ,
    I have defined two drop down box one for Plant and other for Material.
    Plant has 14 entries and Material drop down has 100 entried for every plant.
    Now Dropdown Box is assigned with characteristcs info object 0PLANT
        2nd    Dropdown Box is assigned with characteristcs info object 0MATERIAL
    Plant is used as an Compounding attribute of 0material.
    When i select plant 4040 corresponding material numbers will be displayed in dropdown box of material.
    After that i am selecting a material from that dropdown box.
    Now if i change the plant it is not displaying me any values even though there is data for that plant.
    The dropdown box keeps the previous selection and it is not getting refreshed .
    How to solve this issue.
    Please help me!
    Kind regagrds
    Ram
    Points will be assigned

    Hello Rakesh,
    Thanks for the informations,
    But already these options were selected.
    My issues in if i select 1st drop down box and  then select second drop down box the values are displayed.
    Now if i make change in the 1st drop down box the previous selection of the first drop down box was not cleared and because of that it does not show the values in the chart or table.
    i need to solve this issue,
    Please help me with informations
    Lots of thanks in advance
    Kind regards
    Ram

  • My ipad won't turn on. Have tried to reset by pressing the two button at the same time. It work. Why is this happening? For the first time it happened to me after using the ipad 4 running on ios 7, for almost a year and a halftime

    My ipad won't turn on. Tried to reset and it work. I'm using ipad 4 with ios 7 and this is the first time that this happened to me.what is wrong with the ipad?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • About to buy Lightroom for first time but have questions re. camera and system compatibility.

    Hello there,
    I'm about to take the leap into the world of Lightroom but need advice.
    I have an oldish computer, an Imac G5 which has a powerpc processor, NOT an intel processor.
    My understanding is that because the computer doesn't have an intel processor, I can only run Lightroom2.
    This is potentially a problem, as my camera is a Canon 5d mark ii and from reading online, it seems that Lightroom 2 cannot process RAW files from the 5dmarkii and that I would in fact need Lightroom 2.2?
    I don't know if I can install lightroom2.2 on a non-intel processor computer and I really don't want to have to get a new computer just to be able to use lightroom....PLEASE HELP!
    All advice gratefully received.

    One other relevant point. With LR 2.7 you will be using the old technology "Process version 2003", which you can now consider dated in respect to competitive raw processing software in the market.
    You will also not have the more advanced noise reduction and sharpening technology available in LR 3.x and ACR 6.x in addition to the new technology "Process version 2010".
    The numbers reflect the difference (2003 to 2010).

  • Im stuck on either buying the latest ipad or waiting fpr the next generatons of ipads to come out.. Id like to get it as a gift for my mother but with ios8 coming soon and the new gen soon im stuck on if i should wait

    please help !

    You do realize that all models of the iPad currently out will be able to run iOS8? the 2nd gen iPad may not get all the features of iOS8 but those aren't for sale anymore so not an issue.
    If you need it now, buy an air now. If you can wait a couple of months, wait and see if a new model comes out later this year. There is a big press event scheduled for the 9th and it may include news of any upcoming models to be released for the holiday season.

  • I turned my iphone 4 off and when i went to turn it back on it says connect to iTunes. I tried to connect it but it will not work. Someone please help, im not due for an update for another year! i dont know what im going to do if i cant get it fixed.

    I really need my phone fixed! ive tried connecting it to restore the whole device, it just wont work! I dont know what i will do if i dont have my phone!!!!

    Hello there, morganbailey02.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • Help pleeeease Using Mac for first time, can't set desktop, logged in but seems to be read only

    help please, tearing my hair out!

    What do you intend to do?
    On desktop, on a new Mac, usually there's only the menu bar on top, an alias to your HDD (may not be displayed as default on recent systems), and your dock at bottom screen.
    If you want to find system settings, it's called System Preferences, and you'll find it by clicking on the apple in menu bar.

  • Help syncing my Ipod for first time... when I already have music on my comp

    Well. my Ipod Touch broke a few days ago, due to technical problems. Since I was insured Apple got me a new one, but I already have music on my computer, and my computer was connected with my old Ipod before. How do I make it so my new Ipod will take all the songs from my computer and sync it instead of deleting everything. I'm on the part where I set up my Ipod now and it gives me two options. I can either "Set up as New Ipod" or "Restore from the backup of 'Ipod Touch'"(which was my old ipod that broke). Which should I choose. My mom got the ipod for me, and she was told I was supposed to set it up as a new thing or something. But she was unclear and doesn't know exactly. So which should I choose?
    Thanks in advance.

    Ok, so, I can't restore it from back up, since the new ipod is totally new, and it is not updated or anything. so should I just set it up as a new Ipod and go from there? Will anything i had on my old ipod be deleted from my computer? Like will my apps and music be deleted, or my mail info and bookmarks?

  • I have what I think is a great idea for legitimage music sharing with your friends app, keeping the song writers earning what they have worked hard for!

    But I need advice on what to do about getting it made! I no idea about programming. Im a professional IT guy with good ideas but never know what to do when I get them, I just forget about them. But this one I feel is so good Ive searched the best forums to air my idea, ive never done anything like this before so im going for it. It could even be something apple could impliment into itunes on all devices. So bascily if anyone could advice me what to do or where to go to gert ppl to help me develop this that would be great.
    Thanks very much!!
    Stuart, UK London.

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

Maybe you are looking for

  • Could not complete your request because the file is already in use or was left open by another application

    the message :could not complete your request because the file is already in use or was left open by another application, comes up when i try to open a specific file in PS cs5. nothing is open and i have restarted my imac already and still no solution

  • Can we restrict deliveries at plant level for a particular period

    Hi all, At month end , if we want to close the sale, and restrict all the delievries in that month for a particular plant.. will that be possible, if yes how? can anyone advise.

  • Could not open connection to the SERVER

    Below is the error message that i have encountered. I am using Java version 7. Also tried installing the previous versions as well. But when i check the connection using the ODBS data source administrator i was able to connect the server. !ENTRY com.

  • Dictionaries

    Hi,    in web dynpro, we can save data in Local Dictionary or not? if Yes, what's the mehod to follow?     Please Reply        kapil

  • NWDS for 64 bit Windows 7

    Hi Folks, I want to install NWDS on my Windows 7 64-bit OS. I searched for suitable NWDS(like 7.0, CE7.1, CE7.2 along with their trial versions), but they were available only for 32-bit Windows. Can you please provide some links where I can download