Sometimes an e-mail will take a long time to open

Not all my e-mails open immediately. Some of them take a long time and I have to keep going back to them or wait until the next day.
All my e-mails don't do this. Just some.

I use ccleaner on a regular basis.
That may be one of your problems - apps that claim to 'clean your Mac' usually do more harm than good.
If I were you, I would try a 'fresh' installation of OS X. Simply boot into your Recovery partition (holding down the Command and R keys whilst booting), use Disk Utility to verify and repair Permissions and the use it to verify your hard drive and then install OS X anew. If you don't erase your hard drive, none of your data will be deleted (although it's always best to have a backup, of course).
If the fresh install doesn't 'fix' things, I would just start all over again - erasing your drive and reinstalling everything.
And stay away frorm CCCleaner, etc.
Clinton

Similar Messages

My mail program takes a long time to open and the whole system takes almost 2 minutes to shut down at night What should I do?

Hi, Recently my system has been slow to boot up in the morning & slower still to shut down at night.
Also my mail program is slow to open. I do have emails archived but my trash is always deleted & I'm trying to keep my "sent" folder not too full
Occasionally any programs I'm working in (Photoshop, InDesign, Illustrator, etc) takes time to process whatever task I'm doing. (This happens maybe once or twice a week, not often)
thanks

judithfromrvc wrote:
Macintosh HD:
Capacity: 249.72 GB (249,715,376,128 bytes)
Available: 176.64 GB (176,635,330,560 bytes)
Is the bolded text the correct info? Many thanks for any help, J
<Edited By Host>
Yes it is. Thank you very much. You appear to have adaquate hard drive space available. Now try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

Having moved my Itunes folder to external hardrive and resetting where it is in preferences Itunes can't find them and I have to direct it to every song - I have a months worth of songs on there so this will take avery long time - any ideas on what;s up?

Having moved my Itunes folder to a new external hardrive and resetting where it is in preferences Itunes can't find them and I have to direct it to every song- a little ! pops up next to the song and a dialogue box says Itunes can't find it so thn i have to manually search for it - I have a months worth of songs on there so this will take avery long time - any ideas on what's up?

nellydee wrote:
Having moved my Itunes folder to a new external hardrive and resetting where it is in preferences
That's not how to do it. You don't move stuff then set the iTunes prefs > Advanced.
Once you move the /iTunes/ folder, hold Option, launch iTunes and select Choose library... and select the ITunes folder on the external.
This will use the iTunes library file in the iTunes folder you moved.
Don't change iTunes prefs > Advanced.

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Firefox takes very long time to open and often crashes for some websites

i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

AP Trial Balance - File is massive and takes a long time to open up

Hello,
We are upgrading from 11.5.10 to 12.1.3 and are running into some serioud problems with the Accounts Payables Trial Balance report in Detail Mode.
1. The Report takes upwards of 10 minutes to open up - and in many cases does not.
2. On further research we see that the report output file is > 500MB whereas comparable 11i Trial Balance files are only 19MB.
3. We tried running in various formats Text, PDF, HTML with no luck.
4. In fact HTML and Text formats gave “Authentication failed” errors when we tried to open the report.
My questions are:
1. Why is there a such a large increase in file size? Is this expected going to R12?
2. Is there a way to speed up the opening of the large files or create smaller files? - (summary mode, and smaller date ranges are not options as per business needs). Even a 2 month date range give the same problems.
3. We noticed that the XLA_TRIAL_BALANCES table has 36,521,125 records...LARGE.
4. We compared the ap_liability_balance records between 11i and R12. We have 29,171,382 in 11i and 37,769,034 in R12. But this is expected as we purge regularly in 11i production and I don't think this difference (about 30%) in the size of the tables should cause such a large difference in the size of the report files (nearly 2000%!!!).
5. Why are we getting Authentication failed errors? Just for these reports?
Of course we opened an SR, but you know how SRs go :-) and this is a time critical project with our deadlines nearing.
Any help or pointers from the experts here is greatly appreciated.
Thanks
Edited by: user11992646 on Jan 27, 2012 2:12 AM

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

Downloaded 4.0 and having problems.webpages take a long time to open & when opened, I get a "firefox is not responding" message.yahoo email is not loading.Is there a problem with firefox 4? is the problem going to be fixed?

firefox problems after installing version 4.0

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

ITunes takes a long time to open, or doesn't open at all.

I recently had problems with iTunes where it just wouldn't open. I did a factory reset on my computer, however it takes a long time to open and works really slow. When I try to sync, it takes around in hour.

.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

There are file hidden all around in your system.
Go to Phil Stokes' info page, for a gerat uninstall primer.

Crystal report with prompts takes very long time to open in infoview BOXI3.

Crystal report with prompts takes very long time to open in infoview BOXI3.1?
Is there any way to increase the performance.

Ramsudhakar,
There are several items that could cause these slow down problems. Without knowing more about the way your environment is setup, I could cause more problems, by giving out performance tips. You would need to be more specific in your post.
What we know. BOXI3.1
What we don't know.
O/S
App. Server
Hardware Spec's
ETC.
I see that this post has been out here for some time. So if this is still a problem for you I'll try and help, if you provide more information.
Thanks
Bill

Outlook 2010 takes a long time to open emails with embedded images

Hello,
outlook 2010 on windows 7 both with latest updates applied. outlook is in online mode and the option "Don't download automatically in HTML email messages or RSS tiems" is not selected.
it takes a long time to open the message with an embedded picture: at 6 sec to open an image size of 75kb
When I open the same message in OWA no delays at all.
I am using Exchange server 2010 Sp2 and I already created new outlook profiles for the users affected. no changes.
Any ideas?

Hi Aprylmsx,
According to your description, I recommend you refer to the following methods to troubleshoot the issue:
1. Please check if there is any anti-virus software on your client PC, if yes , please disable it and check the result.
2. Please check if there are any 3rd party add-ins in your outlook, if yes, please remove it and check the result.
In addition, How many users encounter this issue? a lot or just only you?
Best regards,
Niko
Niko Cheng
TechNet Community Support

My mac takes a long time to open an internet page

My mac takes a long time to open on internet page and it's not the connection as all our other apple products in the house are working fine. Any suggestions?

Here are some troubleshooting steps.
Does this behavior persist if you: (1) Try it from a different user account, e.g., Guest? (2) Try it after starting up in Safe Mode ? (3) Try it after turning off all Safari Extensions? (4) Turn off all virus scanners, system cleaners, and third party optimizers? (5) Delete all malware, (6) Temporarily disable all internet plug-ins? (7) Make a burnt offering to Zeus?

It takes a long time to open an app and sometimes it will just crash, any idea how to fix it?

My four year old Macbook Pro couldn't start yesterday and after going through solutions and all, it worked. But now it's freaking laggy and whenever I want to open an app, it takes a long time or the app will just crash. Any idea how to fix it? I really need the speed and everything back.

noeleeeen,
so you have an external hard disk, onto which you deleted/moved files from your internal hard disk, so that you now have 143 GB or so free on your internal hard disk — is that correct? Is the external disk purely for backups (e.g. a Time Machine destination), or does it function as a supplement to your internal disk?
Was it entirely your personal data files (documents, photos, movies, music, &c.) which you’d deleted or moved to the external disk, or did you also delete/move apps, libraries, &c. over there?
I’m not familiar with Echofon Lite, so I can’t comment on it, but an Apple-supplied app like the App Store shouldn’t crash.
Have you tried running Disk Utility yet, to see if its verification process gives your disks its seal of approval?

New install of Horizon 6.1. It's normal that provisioning linked-clones will take a long time ?

Hi,
First, I will describe my installation :
1 Management Server : Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 HDD 300 GB SAS 15K (RAID 5) and 256 Gb RAM
2 VDI Hosts server : Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 HDD 300 GB SAS 15K (RAID 5) + 1 SSD 200 GB, 256 Gb RAM, 2 grid K1 cards
1 LUN on an Dell Equallogic PS6110X (750 GB) where I put the masters.
1 switch Dell N4032F (10 Gb)
All server will have 4 ports 10Gb configured with NPAR (so, i have 6 x 10 Gb virtual nic for the storage and 6 virtual nic for the VM network) and 2 ports 1 Gb for the management.
My master : Windows 7 SP1 x86 optimized with 24 Go HDD Thin-Provisionned (2 vCPU, 2 Go RAM, VMXNET 3 network cards). There is none added application on this master.
I can't apply the Microsoft patch for VMXNET 3 because it says that this patch is not applicable.
I don't have VSAN because only 2 VDI hosts, so I configure my pool for each hosts with local storage for the linked clones and local SSD for the replica.
When I run the provisionning of the desktop pool (17 VM):
The clone of the replica (Equallogic ==> local SSD) will take 2'30".... That's good for me (113 MB/s... the Equallogic is also used for another server storage on other LUN)
But the rest of all operation to finish the provisionning will take 40'.
More than 50% of cores will mount to 100% CPU on the host.
I have tried to change my RAID5 (9 hard disk + 1 spare) to RAID10 (10 HDD). It take 50'.
And, when all operations are finished... I have 2 or 3 VM with the message : Agent Unreachable and 1 or 2 hangs on Provisionning.
A recompose a one VM Desktop will take approximatively 1'30.
My question : it's normal that the provisioning will take so much time ?
And other question : when i'm connected to a VM Desktop with Horizon client during a pool provisioning, the VM freeze or i simply can't connect. Even if i have ready desktop. And sometimes, vCenter client will freeze to a lot of seconds during provisioning
Have someone idea ?
PS : Sorry for my approximate English ;-)

Today, i have try to put the RAID in RAID 0.
Result : always 50 minutes for provisioning.
So, the problem is not the RAID...
In vRealize Operation Manager, I see that i have latency in disk command and disk operation (up to 7000 ms !!!!).
And in vCenter performance (all type of performance), I have a lot of blank graphics during 5 to 20 seconds in different steps.
I don't know where were looking my problem...
Any idea ?

My mail is very slow, each email takes a long time to open. Any suggestions?

Suddenly my mail accounts are taking a long time to open. I'm not sure what the problem is. Anyone else have the same situation?

I have a late 2011 MacBook Pro as well - just the 15" model. I've been running Mountain Lion since it was released and have had no problems with my computer being slow, battery problems, etc. But some people did have problems with battery life after upgrading to Mountain Lion.
Have you installed the 10.8.2 Combo Update as well as the Supplemental Update? It should 'fix' the battery problem. I've no idea why your computer is slow, but you may want to take a look at this user tip - Why is my computer slow?
Good luck,
Clinton

Sometimes an e-mail will take a long time to open

Similar Messages

Maybe you are looking for