Sometimes get error "looking for something on MobileMe?" after publishing via ftp server

I published a website I created on iWeb via an ftp server.  Sometimes it works, but sometimes I get the error "Looking for something on MobileMe?"  My web host says all my settings are correct, so the problem is likely to be in iWeb.  How can I fix this?

I use FatCow as both my domain registrar and my web host, a similar service to GoDaddy.  The FatCow tech support said all my settings were correct.  Here's a pic of the iWeb Site Publishing Settings page:
When I try "Test Connection," it succeeds.
I originally published using MobileMe, then switched to ftp using FatCow.  The ftp publishing worked at first, then I started getting the error message intermittently, now get it all the time.  The FatCow tech thought that something is likely to be imbedded in the code that is taking it to MobileMe.
Thanks again for your help!

Similar Messages

  • Error R32762: # Error: Error looking for resource specification.  Need 'resource' or 'type'

    I have succesfully ported some of my developments to CS5. I have used the following procedure:
    - create new project by using dollyX
    - add source code
    - fix the errors
    But now I have encountered an error I can't figure out.
    Error 1 error R32762: # Error: Error looking for resource specification.  Need 'resource' or 'type'. C:\Program Files\Adobe\CS5\InDesign Product SDK\source\public\interfaces\architecture\IPMUnknown.h 47
    Any suggestions?
    Im running a windows7 machine, visual studio 2008

    Pectora:
       First of all, I'm assuming that you are receiving this error on a Win box.  If on a Mac, then your problems may stem from something else altogether.
       It's a bit complex to cover in an email.  My recommendation is that you open up a couple of the sample plugins and look at them.  Pay close attention to the Properties page of the project.  Look at the Resources field and command line, and also pay attention to the Pre-Link and Post-build fields.  Once they are looking right, highlight your .FR file and click the Properties icon.  Be sure that all four lines have something in them. Model their input after what you see in the sample plugins.
       Finally, are you getting this error when the ODFRC compiler is running, or when the project is getting linked?  The former could indicate a problem with your .FR file, the latter is more likely to be solved by my first suggestion.
    R,
    John

  • Looking for something in the iPad/iPhone Airport App

    Hi
    I have been waiting for the airport utility for iPad/iPhone to come as I frequently travel with just my iPad and Airport Express. However, I have been unable to configure it when away from home.
    So, Apple has released a utility but it appears to be the most important feature for being on the road, that is, the ability to switch connection sharing (so you can hook up to a hotel system).
    Is it that I can't find it or it doesn't allow you to do it. In the iPad app, I am looking for the ability to switch between bridge mode and the other two.
    Thanks,
    Andrew

    Tesserex, thanks for the comment . Can you point to where in the utility I cna figure it to
    Share a public IP address
    Distribute a range of IP addresses, or
    Be off in Bridge mode?
    Thanks,I can't work it out.
    Re: Looking for something in the iPad/iPhone Airport App
    created by Tesserax in AirPort - View the full discussion
    The AirPort Utility App that is available with iOS 5 does pretty much everything that the Mac or PC versions do including controlling both the NAT & DHCP services to allow you reconfigure an AirPort as a bridge.

  • I am getting error "Office for Mac has determined that your  product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error

    i am getting error "Office for Mac has determined that your  product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error and was working perfectly fine with my sheet.

    Could be some Disk Corruption, but...
    http://support.microsoft.com/kb/969064

  • Is apple tv the only item that can be connected to a tv for airplay to work?  Looking for something smaller for the office

    Is apple tv the only item that can be connected to a tv for airplay to work?  Looking for something smaller for the office

    How big do you believe an ATV is?  They are tiny compared to most devices.
    The ATV is the only AirPlay receiver, short of an actual AV receiver with AirPlay support, but those are MUCH larger.

  • Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi Cereskit
    Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
    Vicki

  • What is the best program for designing event flyers? I am looking for something basic and simple.

    What is the best program for designing event flyers? I am looking for something basic and simple.

    Poor old Photoshop® is forever being put down when it comes to layout work, but it is perfectly capable, and can output a high quality print PDF the printer will be perfectly happy with.  OK you don't have the text flow between columns bells and whistles of InDesign and [spit] Publisher, but if you have a $10/month Photoshop/Lightroom subscription, instead of the $50/month full subscription, don't think you can't do a perfectly good flyer or poster.
    https://helpx.adobe.com/photoshop/how-to/align-objects-guides.html

  • Looking for something similar to Slideshow Pro...

    I'm looking for something that my clients can upload their photos to a page on their website via some sort of admin interface such as Slideshow Pro had.  They have shut down their site.  They were Flash based, although you could still view the slideshows on any Apple device.
    I don't care if it looks like the slideshows that they created.  I'm just looking to have something of a lightbox, but I need the client to be able to upload their own, and change their own photos.
    I would like the admin interface to be online, so they don't have to upload an app to one computer.  I don't build my sites using Wordpress, so a Wordpress plugin is not an option.
    Thanks in advance for any help!

    I went ahead and purchased it anyway (about $80 US for the pro version which gives you online admin)!  Just seemed pretty easy.  No database setup even!
    I put a basic test page here: http://willowweb.ca/testPhotos.php 
    The Web admin is really simple.  Not as robust as Slideshow pro, but then again, I would take about an hour to show someone how to use it, and then a few months later, they would ask me to come back and show them again.  Doesn't look like I'll have that problem this time!
    It does show up on an Apple device, so it's definitely not Flash based. 
    Still trying to figure out the tools a bit, but doesn't look like a huge learning curve.  I will play around with it, and let you know whether I give it my thumbs up! 

  • Looking for something that converts various file formtats to TIFF

    Hi everyone,
    I am currently working on a project where I am expected to convert numerous files of various formats into 1 multipage pdf and 1 multipage tiff.
    I've been messing around a lot with iText (which i liked a lot because of how it was free) and I see how it can very nicely convert a multipage TIFF to a multipage PDF.
    Hence, I am looking for something that can convert files of various formats (i.e. doc, txt, jpg, pdf) to a multipage tiff.
    Thank you very much.

    Uh-huh. So what on earth would possess you to ask that question on a forum devoted to Java sound?
    I hope that a mod. might notice this thread and move it to a more appropriate forum.
    And since I am here, the Java forum for TIFFs would be JAI. Try looking through some threads there, for tips.
    Edited by: AndrewThompson64 on Jan 8, 2009 3:30 PM

  • I keep getting a 'Looking for backup disc' message from my  Time Capsule.

    I keep getting a 'Looking for backup disc' message from my  Time Capsule. I have set it up several times without any apparent problems (I have even done a Hard and Factory reset). Everything seems fine until I ask Timemachine to 'back up', and then the problems start.
    Any ideas?

    I had the exact same problem. I bought the Time Capsule this past July and it worked fine for about a month then it told me it hadn't backed up in 10 days and was stuck looking for the backup drive. I called Apple and they said the reason was that the Time Capsule was in Bridge mode. I launched Airport Utility and sure enough, it was. I changed it to DCHP and NAT (Airport Utility -> Network tab -> Router Mode). After updating the Time Capsule, I couldn't even get on the Internet, let alone do a backup. A logged into the software for my cable modem and discovered that it too was in Bridge mode.
    It turned out (for me) that neither should be in Bridge mode (which is for connecting two networks). Your cable modem only has one IP address. Your Time Capsule should be doing the NAT (Network Address Translation) which translates the internal IP addresses on your network to the one IP address your cable modem has. When I switched my Time Capsule to DHCP and NAT, it conflicted with the fact that the cable modem was also trying to do this. The answer was to turn this off on the modem (allowing all the packets to just go through the modem to the Time Capsule and let IT do the NAT). I did that last week and since then, my Time Capsule has been working perfectly.
    1) Go to your cable modem (via a browser, enter "http://192.168.100.1"). Log-in and find the setting that indicates NAT. If you're uncomfortable doing this or can't find it, call your cable company and ask Tech Support to do it for you. They can do it remotely.
    2) Launch Airport Utilty. Go to the Network Tab and change the router mode to "DHCP and NAT".
    3) You may need to restart your modem and Time Capsule. I can't remember if I had to or not.
    I hope this helps. I tried many things but this is the only solution that fixed it for me. And it makes sense. Only one device, the cable modem or the Time Capsule, can be doing the NAT.

  • Get error messages for those procedures in some system tables

    Hi expert,
    when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
    Many Thanks,

    >
    when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
    >
    No - there is no system log table.
    You need to create your own logging package and log table and modify your procedure code to call your own logging procedures to log into your own log table.
    The procedures in the log package would typically be defined with PRAGMA AUTONOMOUS_TRANSACTION so that the exceptions get logged even if your procedure performs a ROLLBACK.
    See AUTONOMOUS_TRANSACTION in the PL/SQL Language Reference
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/autotransaction_pragma.htm
    Here is an Oracle-Base article that shows how to use the pragma to perform logging.
    http://www.oracle-base.com/articles/misc/autonomous-transactions.php

  • I am getting error message  for updating my I pad

    I am getting error message  for updating my I pad

    And what is the error message ? Are you on iTunes 10.5+ on your computer ? If you are getting a network timeout message then try temporarily turning off all your firewall and antivirus software until the download has completed.

  • Get error "Connection for ID MSD.MetadataBrowsingService

    When I am trying to create a data source and browse for source objects I got the following error
    - Get error "Connection for ID [MSD.MetadataBrowsingService.<The Connection ID>] is not valid. Connection
    might be lost or might have expired. Reop
    I read the note 1764681
    and it is says that to solve:Installed 'Data Services RFC Server Service' and 'Data Services Metadata Browsing Service' on same server.
    Which is not clear for me

    we have solved the problem

  • Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

    Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
    Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
    Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
    is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
    Any help is appreicated!
    Thanks

    Hi,
    From your description, you want to achieve the following goal:
    Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
    Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
    Hope my clarification is helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • TS3694 iPod touch gets error -1303 when attempting to restore after update (W7)

    iPod touch gets error -1303 when attempting to restore after update (W7).  This error is not shown anywhere in the specific list.  Have done all recommended recovery methods (reboot, update iTunes, restart iPod) to no avail. What is next?

    Usually the 1303 error is in regards to a corrupted or missing backup of your iPod Touch.  Try removing or moving the backups to another location and then try to restore your iPod once again.
    See this article for information on where backups are stored.
    iTunes: About iOS backups
    B-rock

Maybe you are looking for

  • Asus Transformer book T200TA

    Hello, I'm trying to put an Archlinux on the Asus Transformer book T200TA, and I will share here my progress. I will take note of a lot of things, when I manage to do something or when something does not work. And if you have any ideas to make someth

  • Multiple hostnames for multiple domains

    I am currently running 3.0SP4 in Open mode without a gateway. I have one server instance with two domains (call them domain1 and domain2). Instead of having users have to go to append the domain name to the server URL, I would like to create two sepa

  • How to handle error pages in ICWC??

    Hi Experts, 1. I have created an authorization object for sensitive service tickets. 2. Only users who have the authorizations to view the tickets should be able to view these tickets. 3. I have modified a badi which matches this requirement and work

  • Rule error in workflow

    Hi, I am new to workflow. I am trying to build a test workflow in which at a user decision step if the initiator does not takes a decision after 5 mins then this user decision request should pass to initiator's manager if exist or to super admin.. Ri

  • Why do most apps make it so difficult to enter dates time and numbers

    Why is it that most apps when it comes to entering a date, time or number require you to go to the ridiculous motion of entering data using a scroll wheel. For dates it should be a calendar like interface, for time and numbers give me numeric keypad.