SOMETIMES POWER BOTTON TAKES TIME TO WAKE UP PHONE

SOMETIMES THE PHONE TAKES TO MUCH TIME TO WAKE UP WITH THE POWER BOTTON WHEN I LOCK MY SCREEN I HAVE UPDATED TO ANDROID 4.4 AND STILL HAVE THE SAME PROBLEM.

You could try performing a system repair using Pc Companion as this will often fix issues however this will factory reset your phone
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
Should that fail then you need to either return your device to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • RMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

    rMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

    Did you purchase the Mac new?
    You have 14 calendar days from the time your items are delivered to initiate a return as noted here.
    Even though you are past the 14 day limit, if it were me, I'd take the Mac back and explain what's going on. Your Mac should work out of the box.
    message edited by:  cs

  • Takes a long time to wake up ??

    hi all, i have just got a new MacBookPro (mid 2012) i previously had an early 2011 for over two years until it broke down !.
    my new MBP takes a long time to wake up, it seems to have crashed when i first open the lid, but no, it isnt crashed, it takes about a minute or more to wake up properly, my previous MBP woke up immediately under exactly the same circumstances, they both have Mountain Lion etc. so i cannot for the life of me understand why they should be so different ?.
    Tim

    If the suggestions mentioned in KB Article http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC) suggest you do the following:
    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • Macbook Pro takes long time to wake from sleep

    Hi, I have recently purchased the latest Macbook Pro (Mid-2012, not the Retina display version), and I've noticed if the Macbook is left switched on, with the lid down and not plugged into the mains, it will take a long time to wake from sleep. I've looked for similar posts, and everyone describes it as a long delay, but for me the screen is greyed out (but transparent) and a process bar appears, which fills up and then the display loads properly, but it takes a further 30-50 seconds to activate things like the mouse and wifi etc (it feels like it has completely frozen).
    Has anyone experienced this and is it normal? I looked up standby mode, but am led to believe this is only with the retina display models, so am a bit worried.

    Hi Thumbnut,
    This article may help explain what is going on:
    Mac computers: Progress bar appears after waking from sleep
    http://support.apple.com/kb/HT1757
    I hope this helps!
    - Ari

  • Takes a long time to wake from sleep?

    If my 2012 Mac Mini has gone into sleep mode for some time it takes forever to wake up and become responsive again. There is also a lot of disk activity for some time after it wakes and it is very sluggish.
    It is like it has gone into hibernation?
    Any ideas?

    Checking Disk Utility there are no S.M.A.R.T. errors.
    Activity Monitor the top item most of the time is Kernal Task with around 2.5% CPU.
    There is 13.18 GB Free Ram and Page Outs are 0 bytes.
    In Console there are several repeating messages:
    09/11/2012 22:22:22.456 mdworker[245]: Unable to talk to lsboxd
    09/11/2012 22:24:53.569 sandboxd[255]: ([253]) mdworker(253) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:24:53.576 sandboxd[255]: ([254]) mdworker(254) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:24:53.000 kernel[0]: Sandbox: sandboxd(255) deny mach-lookup com.apple.coresymbolicationd
    Here is a section of repeats:
    09/11/2012 22:20:40.525 mdworker[213]: Unable to talk to lsboxd
    09/11/2012 22:20:40.528 mdworker[216]: Unable to talk to lsboxd
    09/11/2012 22:20:40.000 kernel[0]: Sandbox: sandboxd(219) deny mach-lookup com.apple.coresymbolicationd
    09/11/2012 22:20:41.678 sandboxd[219]: ([213]) mdworker(213) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:20:41.685 sandboxd[219]: ([216]) mdworker(216) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:21:16.779 lsboxd[199]: @AE relay 4755524c:4755524c
    09/11/2012 22:21:21.417 mdworker[236]: Unable to talk to lsboxd
    09/11/2012 22:21:21.420 mdworker[237]: Unable to talk to lsboxd
    09/11/2012 22:21:21.518 sandboxd[238]: ([236]) mdworker(236) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:21:21.538 sandboxd[238]: ([237]) mdworker(237) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:21:21.000 kernel[0]: Sandbox: sandboxd(238) deny mach-lookup com.apple.coresymbolicationd
    09/11/2012 22:22:01.715 lsboxd[199]: @AE relay 4755524c:4755524c
    09/11/2012 22:22:22.456 mdworker[245]: Unable to talk to lsboxd
    09/11/2012 22:22:22.467 mdworker[246]: Unable to talk to lsboxd
    09/11/2012 22:22:22.531 sandboxd[247]: ([245]) mdworker(245) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:22:22.553 sandboxd[247]: ([246]) mdworker(246) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:22:22.000 kernel[0]: Sandbox: sandboxd(247) deny mach-lookup com.apple.coresymbolicationd
    09/11/2012 22:22:44.290 lsboxd[199]: @AE relay 4755524c:4755524c
    09/11/2012 22:24:53.492 mdworker[253]: Unable to talk to lsboxd
    09/11/2012 22:24:53.495 mdworker[254]: Unable to talk to lsboxd
    09/11/2012 22:24:53.569 sandboxd[255]: ([253]) mdworker(253) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:24:53.576 sandboxd[255]: ([254]) mdworker(254) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:24:53.000 kernel[0]: Sandbox: sandboxd(255) deny mach-lookup com.apple.coresymbolicationd
    09/11/2012 22:29:03.164 mdworker[269]: Unable to talk to lsboxd
    09/11/2012 22:29:03.167 mdworker[270]: Unable to talk to lsboxd
    09/11/2012 22:29:03.240 sandboxd[271]: ([269]) mdworker(269) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:29:03.246 sandboxd[271]: ([270]) mdworker(270) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:29:03.000 kernel[0]: Sandbox: sandboxd(271) deny mach-lookup com.apple.coresymbolicationd
    09/11/2012 22:33:20.658 mdworker[286]: Unable to talk to lsboxd
    09/11/2012 22:33:20.661 mdworker[287]: Unable to talk to lsboxd
    09/11/2012 22:33:20.715 sandboxd[288]: ([286]) mdworker(286) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:33:20.720 sandboxd[288]: ([287]) mdworker(287) deny mach-lookup com.apple.ls.boxd
    09/11/2012 22:33:21.000 kernel[0]: Sandbox: sandboxd(288) deny mach-lookup com.apple.coresymbolicationd
    Phil

  • Hi Since updating to ios 7.04 i have noticed the phone consumes so much more power. I have to charge the phone twice sometimes 3 times a day. WHY?

    Hi Since updating to ios 7.04 i have noticed the phone consumes so much more power. I have to charge the phone twice sometimes 3 times a day. WHY?

    Hi,
    Thanks! I forgot to add, I have debonded and rebonded the bluetooth in car and phone and have carried out 3 restores on the phone in my ITunes. All to no avail. I have also jsut spent £40 on a lead from Ford that has made no difference too! I went to them today to request a software upgrade on my car as I though perhaps the lack of connectivity in the car was down to the car being behind the iOS5 software but was informed there was no need for an upgrade and this problem is purely an apple problem! Is there any way around the downgrade? Or are apple gong to resolve this problem at all??

  • I have recently had problems in getting my Adobe Premiere Elements 10 to run. One of the gentlemen was able to take over control of my computer, and got it working for me, however since that time the program will sometimes open but most times it just free

    I have recently had problems in getting my Adobe Premiere Elements 10 to run. One of the gentlemen was able to take over control of my computer, and got it working for me, however since that time the program will sometimes open but most times it just freezes the computer and I have to shut it down and re open without any success with opening the elements program.
    Can you help

    Sosure
    What computer operating system is your Premiere Elements 10 running on?
    What video card/graphics card does your computer use? NVIDIA GeForce? If so, please read the Announcement about the Premiere Elements 10 NVIDIA GeForce issue which is found at the top of this web site. Does that apply to you? The explanation for the situation and the fix (roll back of the driver version) are all included in that Announcement.
    We need to rule in or out this factor at the onset before we get to other questions
    a. non NIVIDIA video card/graphics card driver
    b. project preset and properties of source media
    c. computer details
    More later.
    We will be watching for your reply.
    Thank you.
    ATR

  • HT4367 takes time to access programs on the apple tv main menu

    takes time to access programs on the apple tv main menu

    Hello, Msk5speed. 
    Thank you for visiting Apple Support Communities. 
    Sometimes a simple power cycle of your Apple TV and router can resolve this issue.  If those steps do not resolve the issue, take a look at the attached two sections below. 
    Check the connections and inputs
    Make sure the cables between your Apple TV and TV are connected properly.
    Securely connect the power cords for your Apple TV and TV to a working power source.
    Turn on your TV and switch it to the correct input.
    Restart your Apple TV.
    If the issue persists, see the steps related to your issue below.
    Troubleshoot network issues
    Troubleshoot Wi-Fi networks and connections.
    Switch between wired and wireless networks.
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/HT6106
    Cheers,
    Jason H. 

  • I updated my iPhone 4S and my iPad 4 to iOS 7 now they both drop all my contents all my notes go missing I keep having to turn it off and on sometimes several times to make a phone call and the scroll rarely works is there anything I can do?

    I updated my iPhone 4S to iOS 7 now my phone constantly deletes all my contacts and takes days to download them from my iCloud again, constantly needs to be turned off and on sometimes several times to make a phone call, the scroll rarely works, is there anything I can do, the apple tech told me it was something I'd just have to get used to, my phone worked perfectly before the update.

    Even if it is a hardware problem they should fix it regardless of warranty. If you buy a car and after 1.5 years the doors fall off due to a failure in their design and construction, do you think the car manufacturer could pull off what Apple is trying to do? Yes the car still delivers its primary objective of driving from A to B, but significant functionality has been lost due to their fault.
    It is the same with this iPhone wifi problem. Apple are a disgrace, I have had significant Apple Hardware failures with my MacBook Pro and iPhone within 2 years of purchase. Pathetic quality.

  • I mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

    i mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

    Try a reset by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

  • P35 Platinum: I have to press the power button multiple times to start

    Hello fellow MSI customers,
     as written in the subject, I have a problem with starting my PC. When I press the power button, the computer powers on, but there is no output to the screen. In fact, my LCD stays in standby mode. I can hear the fans running, so something is going on. According to the LEDs on the mainboard, it is a memory problem.
     Now I turn the computer off, using the power button (have to hold it for a few seconds). When off, I start again and everything runs as it should.
     After starting, I ran memtest86 multiple times without any errors. I ran a few games, compiled some programs, installed Vista 64bit, Linux, all without any crashes or hangups. It is just the starting that makes problems. After booting it is very stable.
     Seeing that it could be a memory problem, I brought another pair of memory, just to be sure. I couldn't reproduce the problem on that day! Any type of memory I put in (the one before, or the newly brought home) the computer always started on the press of the button. So I thought, OK, maybe they were not seated correctly. But, alas, two days later it is again only starting by pressing the power button three times.
     What I tried:
     1. Boot using only 1 piece of memory stick
     2. Boot using only 1 piece of memory, but different one
     3. Use another pair of memory   <-  worked, but on that day it also worked using my original memory
     4. Disconnected everything except graphics card, to make sure it is not a power supply issue (minimized power usage)
     5. Tried all of the above with a different processor
     6. Used another power supply
    Any other ideas?
    Here are my specs:
    MSI P35 platinum
    Core2 Q6600
    Nvidia 7900GT
    4GB V-Data DDR2 800MHz      <--- I think this is the problem, any experiences?
    Enermax Liberty 400W
    a few other things (HDDs, XFi, DVD-RW)
    By the way, how can I boot from an external DVD-RW? It doesn't show in the menu when I press F11 (boot menu).
     Thank you for any help, muro
    And just to let a bit of steam off:
    1. I had major problems with the RAID controller (not MSI fault, rather intel) - I put two disks into a RAID 0, then RAID 1 and they always failed after a few boots - member missing on both disks. I was getting angry, so I put them as normal (non RAID) disks and everything is fine since, although no RAID.
    2. Installing anything except windows with an IDE DVD-RW is very hard. It took me ages until I got Ubuntu booting (there are guides on the net, google is your friend), and much longer to get grub (boot loader) working. Long story short - if you have multiple disks, use the Linux disk as the bootable, do NOT put grub on the disk where Vista is installed.
    3. I have no idea, how to update the BIOS, if I had to. I'm using 1.1 that came on the board. I use 64bit Vista and Linux, none of which is supported to upgrade the BIOS. Any hints how to do it (if I needed to)?

    Hello,
     now today is the day I've finally received my replacement board. The good news first - it DOES work! Yepeeee!
     Now some more information:
       The jmicron controller seems to be missing - a screen with something about "Marvel" is shown before the intel raid screen. However, it is only visible for a fraction of second, so I cannot read it. I think it detects my IDE DVD-RW so I'm quite certain it's the replacement for jmicron. I won't miss it - it took me ages to install Linux with the jmicron controller.
       The problem where I had to restart the computer sometimes because it didn't even post (RAM error) is gone. It boots just fine now.
     I had an extremely long first post - about a minute, but after that it boots very fast now.
     anyway, regarding some questions around here - the manual states MSI recommends using an 350W power supply. My 400W is more than enough. Please note - it is an Enermax, not one bundled with a cheap case. My cheap RAM sticks also work very well now. I did try them on different boards before, so now I know I just had a faulty board.
     In the end, I can only say this: This is my 3rd board already and it's the first one that works well. As the hardware changed, I presume there were major issues with this board that lead them to make a new revision. What is strange, though, is that the revision is still 1.1, as were my previous two. I pity everybody who had the same problems as I did, but I can now say that I'm very happy about the board now.
     Cheers, muro

  • After sleeping my macbook pro 15.4" mid 2012 model for overnight and pass 24 hours time, on wake -- the dock background is white for a few seconds and then it turns back to normal color. . .

    After sleeping MacBook Pro 15.4" mid 2012 model (running Mac OS X 10.10.2 Yosemite) for overnight and pass 24 hours time, upon wake from sleep-- the dock background is white for a few seconds and then it turns back to the normal color.
    Is this normal? Should I be worried? Is my GPU defective?
    My specs:
    MacBook Pro 15.4" Mid 2012 model, Ivy Bridge Quad core i7 2.3Ghz CPU w/ hyperthreading,
    16GB RAM, Nvidia 650M 512MB VRAM/Intel 4000 HD 1GB VRAM, 500GB HD
    Running Mac OSX 10.10.2 Yosemite.
    Thanks to all in advanced.

    It doesn't happen all the time but sometimes and i tried zapping the PRAM and it still happens!

  • I just dropped my iphone and the power botton stopped working and the screen went black i allready tried to connect it to the computer and nothing what can i do

    my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do

    You can take it to Apple and get replaced as long as you pay for the replacement.
    Allan

  • External hard drive won't power back up when iMac wakes from sleep

    I have the external hard drive connected via USB. I always put my iMac to sleep before going to bed and I wake it up when I come home from work. Except that when I do, the external hard drive doesn't power up. It still shows in Finder, but clicking on it's folders just opens them up as if they were empty. There's no access noise and the drive can't be ejected.I have to switch it's power off and turn it back on for it to spin back up.
    At first I thought it was because I had Energy Saver set to power down the drives whenever possible, which works just fine when it's on, the drive powers on and off as needed just as long as the iMac doesn't go to sleep. I turned it off just to make sure and it made no difference. As soon as the iMac goes to sleep and the drives powers down, it will not come back on without a power cycle once the iMac wakes.
    I've used this drive in an old Macbook for years without having this problem. The only difference is that the Macbook was on 10.6.8. I was thinking about buying a 4 bay USB enclosure and filling it up with hard drives, but I'm not about to do that if every time I put the iMac to sleep, the whole thing will not power back on without a power cycle.
    Any help would be much appreciated.

    Not sure if you managed to get this issue resolved yet Marcus, but I too have a similar problem:
    Currently I'm upgrading from Leopard to Lion (via Snow Leopard) on both an iMac and MacBook Pro (both Intel), but before I proceed with the OSX upgrade I wanted to back everything up. Thus far I have partitioned an external firewire drive (G Drive - one that is bootable), and cloned each machine using Carbon Copy Cloner to it's own partition (both GUID). There is plenty of space left over on each partition.
    The issue - I can boot the OS X from the external drive on the MacBook Pro but not on the iMac.
    When I restart and hold down Option on the iMac the only drive that appears is the HDD, not the other two selectable drives that are visible if I boot up on the MacBook Pro. On the iMac in System Prefs > Startup Disc I can see all 3 drives but when I select it and restart, the machine freezes on the grey loading screen and goes no further.
    Not that it should make a difference, but there is a 3rd partition on the external drive that is currently empty (for extra storage).
    Any help is greatly appreciated - I can't find any relevant answers elsewhere. Thanks,
    Dan

  • It takes time before the system is working properly

    Hi,
    This morning something strange happened.
    Turn on the iMac, the chime is there but when using the audio control keys (F4-F15-F16), nothing happened.
    Trying to quit an application (like iMail) from the dock does not work either.
    The icon in the dock shows the selected view but the options above the icon are not shown.
    For your info: the audio is working when using iTunes.
    But after waiting for a few minutes, the system is back to normal: the options above the iMail icon are shown and the audio control window is shown as well.
    For some reason, the system needs a few minutes to get back to normal.
    It performs the selected actions but they are delayed.
    Additional information:
    - The permissions are o.k.
    - No external DVD writer or hard disk has been connected
    - USB connected equipment: EyeTV, cardreader
    I have rebooted, restarted the systems a few times and it goes wrong in most of the cases.
    Here is the system log for a case where it goes wrong.
    Anyone?
    Could the problem be caused by the error message at 12:38:32?
    Apr 27 12:38:31 iMac-Rob shutdown: reboot by Rob:
    +Apr 27 12:38:32 iMac-Rob SystemStarter[210]: authentication service (219) did not complete successfully+
    +Apr 27 12:38:33 iMac-Rob SystemStarter[210]: The following StartupItems failed to properly start:+
    +Apr 27 12:38:33 iMac-Rob SystemStarter[210]: /System/Library/StartupItems/AuthServer+
    +Apr 27 12:38:33 iMac-Rob SystemStarter[210]: - execution of Startup script failed+
    Apr 27 12:39:00 localhost kernel[0]: hi mem tramps at 0xffe00000
    Apr 27 12:39:00 localhost kernel[0]: PAE enabled
    Apr 27 12:39:00 localhost kernel[0]: 64 bit mode enabled
    Apr 27 12:39:00 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Apr 27 12:39:00 localhost kernel[0]: vmpagebootstrap: 512847 free pages
    Apr 27 12:39:00 localhost kernel[0]: migtable_maxdispl = 71
    Apr 27 12:39:00 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Apr 27 12:39:00 localhost kernel[0]: 90 prelinked modules
    Apr 27 12:39:00 localhost kernel[0]: ACPI CA 20060421
    Apr 27 12:39:00 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
    Apr 27 12:39:00 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Apr 27 12:39:00 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Apr 27 12:39:00 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Apr 27 12:39:00 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Apr 27 12:39:00 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
    Apr 27 12:39:00 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Apr 27 12:39:00 localhost kernel[0]: Started CPU 01
    Apr 27 12:39:00 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Apr 27 12:39:00 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Apr 27 12:39:00 localhost kernel[0]: Security auditing service present
    Apr 27 12:39:00 localhost kernel[0]: BSM auditing present
    Apr 27 12:39:00 localhost kernel[0]: disabled
    Apr 27 12:39:00 localhost kernel[0]: rooting via boot-uuid from /chosen: 706A03DF-BE50-44AC-82DB-D23B5D479191
    Apr 27 12:39:00 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Apr 27 12:39:00 localhost kernel[0]: USB caused wake event (EHCI)
    Apr 27 12:39:00 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 PCI now active, GUID 0019e3fffe89003a; max speed s400.
    Apr 27 12:39:00 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/WDC WD2500JS-40TGB0 Media/IOGUIDPartitionScheme/Customer@2
    Apr 27 12:39:00 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Apr 27 12:39:00 localhost kernel[0]: CSRHIDTransitionDriver::probe:
    Apr 27 12:39:00 localhost kernel[0]: CSRHIDTransitionDriver::start before command
    Apr 27 12:39:00 localhost kernel[0]: CSRHIDTransitionDriver::stop
    Apr 27 12:39:00 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
    Apr 27 12:39:00 localhost kernel[0]: Jettisoning kernel linker.
    Apr 27 12:39:00 localhost kernel[0]: Resetting IOCatalogue.
    Apr 27 12:39:00 localhost kernel[0]: display: family specific matching fails
    Apr 27 12:39:00 localhost kernel[0]: Matching service count = 0
    Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
    Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
    Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
    Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
    Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
    Apr 27 12:39:00 localhost kernel[0]: Previous Shutdown Cause: 3
    Apr 27 12:39:00 localhost kernel[0]: display: family specific matching fails
    Apr 27 12:39:00 localhost kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
    Apr 27 12:39:00 localhost kernel[0]: 4.170.46.5IPv6 packet filtering initialized, default to accept, logging disabled
    Apr 27 12:39:00 localhost mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[32]: starting
    Apr 27 12:39:00 localhost memberd[40]: memberd starting up
    Apr 27 12:39:00 localhost DirectoryService[45]: Launched version 2.1 (v353.6)
    Apr 27 12:39:00 localhost lookupd[44]: lookupd (version 369.6) starting - Sun Apr 27 12:39:00 2008
    Apr 27 12:39:02 localhost kernel[0]: yukonosx: Ethernet address 00:17:f2:da:0f:96
    Apr 27 12:39:02 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:1b:63:14:3b:be
    Apr 27 12:39:02 localhost launchd: Server 331f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[44]: exited abnormally: Hangup
    Apr 27 12:39:02 localhost kernel[0]: Registering For 802.11 Events
    Apr 27 12:39:02 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
    Apr 27 12:39:02 localhost diskarbitrationd[39]: disk0s2 hfs 9A0A53D7-98B5-3116-8E2B-08011F0C72BF Macintosh HD /
    Apr 27 12:39:02 localhost kernel[0]: IOBluetoothBNEPDriver: Ethernet address 00:19:e3:ef:d4:33
    Apr 27 12:39:02 localhost lookupd[63]: lookupd (version 369.6) starting - Sun Apr 27 12:39:02 2008
    Apr 27 12:39:03 iMac-Rob configd[36]: setting hostname to "iMac-Rob.local"
    Apr 27 12:39:03 iMac-Rob configd[36]: bootpsessiontransmit: bpf_write(en2) failed: Operation not permitted (1)
    Apr 27 12:39:03 iMac-Rob configd[36]: DHCP en2: INIT transmit failed
    Apr 27 12:39:03 iMac-Rob /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Apr 27 12:39:04 iMac-Rob loginwindow[66]: Login Window Started Security Agent
    Apr 27 12:39:04 iMac-Rob kernel[0]: AppleYukon - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled
    Apr 27 12:39:06 iMac-Rob configd[36]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Apr 27 12:39:06 iMac-Rob configd[36]: posting notification com.apple.system.config.network_change
    Apr 27 12:39:06 iMac-Rob lookupd[96]: lookupd (version 369.6) starting - Sun Apr 27 12:39:06 2008
    Apr 27 12:39:07 iMac-Rob kernel[0]: netsmb_dev: loaded
    Apr 27 12:39:08 iMac-Rob mDNSResponder: Adding browse domain local.
    Apr 27 12:39:08 iMac-Rob configd[36]: target=enable-network: disabled
    Apr 27 12:39:09 iMac-Rob kernel[0]: smbfssmbqfsattr: (fyi) share 'NTFS', attr 0x2b, maxfilename 255
    Apr 27 12:39:09 iMac-Rob kernel[0]: smbfs_aclsflunksniff: sm_args.uid 501, error 2

    Mac_Robban wrote:
    Could the problem be caused by the error message at 12:38:32?
    Apr 27 12:38:31 iMac-Rob shutdown: reboot by Rob:
    +Apr 27 12:38:32 iMac-Rob SystemStarter[210]: authentication service (219) did not complete successfully+
    +Apr 27 12:38:33 iMac-Rob SystemStarter[210]: The following StartupItems failed to properly start:+
    +Apr 27 12:38:33 iMac-Rob SystemStarter[210]: /System/Library/StartupItems/AuthServer+
    +Apr 27 12:38:33 iMac-Rob SystemStarter[210]: - execution of Startup script failed+
    It looks like that message comes immediately after you tell it to restart, so it's not related to your problem. I see those same lines in my log, anyway. The actual reboot comes with the next line, at 12:39:00...
    As for the slowdown, do you have an external file share turned on that mounts at startup? I see a mention of an SMB mount called "NTFS" in your log. That can slow things down a lot, especially if it's not available.
    Also, things are a bit slower right after a reboot. For example, when you launch a program for the first time after a reboot, it takes quite a bit longer. But once it's been launched once, it'll launch much faster after that. Also, lots of things are going on in the background, even once the Finder desktop comes up. If you have a lot of applications listed in "Login Items" in your "Accounts" preferences, those take time (and more important, CPU time) to start up, too.
    Also, see if things speed up if you remove the EyeTV and card reader. Maybe they're starting a process that's taking a lot of CPU time...
    charlie

Maybe you are looking for

  • How to send an ALV to Spool

    Dear all, Could you please help, my requirement is to send an ALV report as a PDF attachement to a list of email address. My plan is to send the ALV to spool and read it from there and email it. However I have a problem in as much as the ALV is not b

  • Discount should calculate on VAT/CST in MM Pricing procedure.? or How to write  routine to calculate discount amount after VAT/CST .?

    Hi All, Client is asking discount should calculate after Base+ED+VAT/CST. How to achieve this by configuration or by creating routine? I am reading Discount amount from condition tab but not able to deduct it after VAT in Routine.

  • Wired comp losing connection every ten or 15 seconds

    my wired connection drops every 15 to 20 seconds   wireless on other comp works fine  help me please  thanks.I have a hp comp desktop nd a dell  the hp keeps dropping  it is the one wired to a netgear modem/router  cg3000dv229. if that helps

  • Updatable materialized view

    Can someone help with this scenario: Say I have a master site 1 that has two tables T1A and T1B. I would like to have these tables viewable and updatable on another site 2. Site 1 is on a ship and site 2 is on a shore. Site2 will have access to Site

  • Trouble converting to ipod format

    I've got a 23 minute piece thats a DivX 3.11, 352 x 240, Millions MPEG Layer 3, Stereo, 44.100 kHz every time I run it through an export in quicktime to the ipod preset format I get the message in the progress window at the end of the export with "fa