Sony Bravia TV does not recognize Apple TV

I have plugged everything in, power and hdmi etc but in the HDMI input settings the Sony TV does not recognize the Apple TV...
Any ideas??

There are no video adjustements on AppleTV 2.
It outputs a 720p signal.
I would imagine your TV accepts that if it has HDMI.
Try the usual troubleshooting steps:
1 - Turn everything connected on/off at the mains and restart
2 - Try a different HDMI lead if you have one.
3 - Try a different HDMI input on the TV if you have one
4 - Try a different TV set with HDMI input to try to rule out a faulty AppleTV
If none of the steps above work, specifically 4, I would assume AppleTV is a lemon/faulty and exchange it.
If it works ok with another set then it's probably an HDMI incompatibility issue, almost certainly at AppleTV end as you rarely hear of problems with other devices and HDMI, and there are known HDMI glitches with some sets. If it's an incompatibility I would take it back for a refund myself, but do let Apple know here:
http://www.apple.com/feedback/appletv.html
so they can try to fix it in a future software update for the device. Provide them the TV make/model number.

Similar Messages

  • My Sony Xperia ZL does not recognize the last update of the software

    My Sony Xperia ZL does not recognize the last update of the software or from the same mobile or from the computer app, I formatted the phone but it still does not recognize it when I give updates check it tells me that the phone have the latest software.
    Thanks

    You can find the latest available software update information on our product blog. When an update is available for your phone you will get a notification.
    If want to know more about software roll out process and how it works please see this topic.

  • Sony Bravia 2006 will not recognize AppleTV

    I cannot seem to successfully connect my Apple TV to my Sony Bravia KDL40S2000. I've followed all the suggestions I can find online:
    I have connected the AppleTV to the Sony Bravia with multiple HDMI cables.
    The HDMI port is active, and works with other devices (there is only one)
    The Apple TV is connected directly to the TV.
    The Apple TV works fine on other TV's
    I know which video channel to look for.
    There is no sound or video.
    The resolution on the Apple TV is set to auto. I have tried them all.
    I have contacted Sony, they simple gave me the user manual, very unhelpful.
    When connected there is simply no signal.  Does anyone have an idea how to fix this?
    Thank!

    Since it is working on other TV's the issue would reside with the Sony display. Best to persist with them.

  • ICloud control panel on Windows PC does not recognize Apple ID

    Shifting from MobileMe to iCloud ... iPhone 4S successful, Windows PC's iCloud control panel  recognizes my Apple ID and password but not as an iCloud account. Have removed and reinstalled control panel; have restarted; problem persists, can't seem to figure it out.

    You can't setup (create) an iCloud account using a PC. You must use an Apple device, a Mac or an iPhone etc. Once you have created an account you can sign in from your PC.

  • Itunes Does Not Recognize Apple tv - using ethernet

    I was having trouble syncing with iTunes using wireless; so I began using ethernet. The first time I connected with ethernet, everything sync'd right up; well I did have to update the firewall settings on NetBarrier to allow iTunes to connect to my iMac. Note: all of the firewall settings were working for wireless access - it was just unstable - probably interference. So I go to ethernet
    1 week later and iTunes cannot see the Apple tv. Things I have tried so far:
    validated firewall settings in Preferences>Security
    validated firewall settings in NetBarrier
    Restarted Apple tv
    Restarted iTunes
    Unauthorized and Reauthorized computer with iTunes Store
    Restarted iMac
    Powered off/on my router
    Factory reset of Apple TV
    Re-installed iTunes
    The Apple Tv can access iTunes store but iTunes is blissfully unaware that it exists.
    Any ideas what to try next?

    While iTunes Music Sharing was "on" in NetBarrier, when I looked at the log I could see that the udp packets from the Apple Tv were being blocked; it indicated that the ip address was in the Stop List. When I set a rule to ignore traffic from the Apple TV ip address, it immediately connected with iTunes and sync'd up.
    NebBarrier apparently thought the Apple Tv was flooding the network and put it in the Stop List.
    Much better now.

  • Sony ericsson arc does not recognize the headset with a headset

    Hello, I bought myself a headset that's Marshall Major FX, and my phone sony ericsson arc displays a message that the device is not The supported on any other brand of phone no problem. I suspect that it is at the program level. Someone faced a similar situatsyey?

    Yes, thank you, it solved the problem. True sound is muted, but I have already ordered an adapter 3.5mm TRRS to 3.5 TRRS Adapter

  • Will not recognize apple ID or password

    Trying to set up Apple TV. I enabled home sharing on my ITUNES account on my Mac. The apple TV does not recognize apple ID/password.

    is the atv otherwise able to access internet connect which require no appleID ? such as youtube?
    because if it dont have internet access and is asking for the password for the wifi then your appleid password may not be the same one as the wifi password

  • My Xperia does not recognize My headphones

    Please helpme my Sony Xperia z3 does not recognize My headphones. I connect it but I can not Hear nothing on them.

     Settings > apps > all > smartconnect > clear data > restart the phone > if that doesn't work then repair the phone with PCC  PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355 

  • Imovie 4 does not recognize my Sony Handycam DCR-TRV310 so I can't import.

    I have used this camera before with out problems but must have been imovie 2.
    The program does not recognize the camara. I have unpluged and plugged and restarted and done everything that I have read to do but still nothing. help

    I have gone through the steps of this article. I am connected by firewire. I have disconected, recontected, turn on and off and restarted and nothing. I have made sure the date and time are correct. I did upload this tape from at old VHS tape of family pictures. This handycam wasn't a problem with older imovie versions and older systems 9. When I go to the sony site they only talk about connecting to a pc. When I go to apple profiler and fire wire is just says "
    Fire Wire bus: Max speeed up to 400 Mb/sec" It does not recognize the camara. The only thing that I have not done is go buy a new firewire cord but I am worried that imovie can't recongnize the camara. Thanks for the help

  • I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

    I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • "Apple Mobile Device" failed to start. itunes does not recognize my iPhone4.

    I decided it was time to resync the music on my iPhone since its been months. I begin the sync and after a minute or so, my iTunes suddenly does not recognize my iPhone and freezes. I honestly have no idea what happened but was undaunted.
    OS is MS Windows 7 Home Premium 64 bit SP1
    Now, after trying:   
    - updating to iTunes 10.6.3, which stops installing after a popup saying "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. With the options Abort Retry or Ignore. Retry does nothing. Ignore allows iTunes to install but it doesn't recognize my phone still which is all I care to use iTunes for.
    - uninstalling all iTunes, Apple, Quicktime, and Bonjour software, which was difficult to do since you have to follow a particular order or else they wont actually uninstall.
    - performing a registry clean using CC Cleaner
    - wiping my compter's apple related Temp files in app data..
    - restarting with a clean boot... updating all drivers.. updating windows..
    I am becoming quite daunted.
    I have done essentially every single thing I could find that might resolve this error. I restarted and tried again (this is the third or maybe four time) and it still will not install.
    I cannot get any third party software to recognize the phone either since I need that Apple Mobile Device. I could always sync my library with Spotify but that's cumbersome and makes me not like my beautiful iPhone.
    Any help would be AMAZING. I've run out of ideas.

    The link above is bad... that account has been suspended.
    Just an FYI, I'm running Windows 7 Professional 64-bit and had just downloaded Itunes 10.7 for this platform.
    Please know that I have NEVER plugged any Apple device into this great computer.
    I have the new Iphone 5 READY to plugin and in ANTICIPATION of installing that phone; I first wanted to start by installing Itunes without any hardware potentially messing up the works.
    I have the exact same problem as reported here and in about 100 places here at Apple.  Please note this system has never seen ANY of these apple applications including quicktime, Itunes, Bonjour, or anything else from Apple for that matter.
    So basically, I'm stuck.  I've read the articles at about 20 sites now and it looks like this is a SEVERE and widespread problem; however, I have yet to find a "real" solution.
    Any advise would be greatly appreciated.  I'm an IT/Telecom Expert and it took me 3 hours to get the Iphone 5 setup and working properly (mainly because of the screen not working sideways for 95% of the configuration options and being forced to fat finger settings) including everything working with Icloud hosted contacts, facebook, a few networks and getting my gmail out of the way (of Icloud and facebook) and finally getting everything rocking, only to hit the wall when it came to Itunes.  Kind of a drag if you ask me.  (I'm thinking the Samsung Galaxy III that I returned to get this thing might have been less grief; but I guess we'll see).
    Anyone with a real fix, please reply!  I could use the help BEFORE I try to plug this phone into my computer!
    Thanks!

  • HT4199 My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    try disabling email scanning for incoming mail.
    One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored.

  • After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
    my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

  • I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files.

    I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files. I am stumped.

    If you have the original movie files, you'd be much better converting those, otherwise try MPEGstreamclip.

  • HT4352 I have home sharing turned on on my computer but the Apple TV does not recognize it even though the same Appleid and password is used. Does anyone have this issue and, if so, how did you resolve it?

    Issue with Apple TV not recognizing the home sharing option in itunes. Calls for paswrod but even when added it still does not recognize it. iTunes indicates that the home sharing optionis on but this is apparently not seen by Appletv. How can this be resolved?

    Hi Augstiner57, I have the same problem.  Did you figure it out?  Mine seems to have happened after I updated Apple TV. Now it doesn't recognize my Home Sharing even though on my MacBook is it turned on.
    I am running an old OS  though (Leopard) so  I am wondering if I need to upgrade.

Maybe you are looking for

  • How do I edit the password for a website stored in Keychain?

    I have an issue.  Safari is capturing the wrong password when it saves the password to Keychain.  There is no way for me to change or edit the password.  Every time I try entering the correct password and login, I get a prompt asking me to upgrade th

  • How to read the attributes of XML file

    Hi this is ant, I am new to java, XML, I have a senario 1) I have to read all the href attributes for topicref child, and then read the corresponding xml file which is mapped in href="". First.xml <map> <topicref nav="garage" href="task/gar/view.xml"

  • IPod touch TV OUT (no video/only audio)

    I got a McAlly AV Cable (composite cable: Yellow,White,Red) and connected my iPod touch to my TV (4:3 not widescreen) directly. But, I can only get audio and no video. My setting on iPod touch ... WideScreen: off TV signal: NTSC (I'm in the US). Has

  • Info IDoc received with status 8 infopackage hanging in yellow status

    Hi All, when I extract the Text data without data selection it is fetching the 14 record into BW and changing the status to green, however when I go with data selection it has No record for this selection in RSA3 as well in BW . when I do this data s

  • Thinkpad W530 Yellow (Rear) USB port stopped working

    I have had my W530 for about 3 month and the rear yellow USB port just stopped working a few days ago. I have recovered the whole system to factory status and updated the BIOS but the USB port is still not working. I tried several devices, it seems l