Sony cperia z3 stuck in flight mode

hi my z3 is stuck in flight mode but in settings it says it isnt, i cant make any calls cause of this and i have tried resseting, repairing with companion, rebooting and also restarting PLEASE HELP ME 

Contact Sony Xperia Support it's probably a hardware issue.
http://support.sonymobile.com/global-en/contactUs/

Similar Messages

  • Sony z3 stuck in airplane mode.

    My Z3 will not come out of airplane mode. Tried every thing including a complete reset to basics. Anyone else seen this ?

     I have the exact same problem, Markz3. Did u manage to find a solution to this problem? Could it be a hardware issue like a messed up antenna? Markz3 wrote:When the 'phone powers up, if you press the power button on the side the Airplane Mode is always ON. If you switch it off it goes off but there is still no sevrice. Looking through services menu shows the box for airplane mode un-ticked. If you set it and turn it off again the power button mode says it's  still on. If you tick and use the power mode to turn it off the service menu option un ticks but there is still not service. When trying to make a call it says you need to turn the flight mode off.

  • My iPod Touch is stuck in recovery mode after I left it on while updating!!!

    I was updating my ipod touch 3rd generation (ios 4.3, i think) and I saw a wasp and left the computer on in the middle of the updating process and now the ipod is stuck in recovery mode and it says the only way to get it out is to recover it, but that will erase everything!!! HELP ME!!! until i get an answer      I HATE YOU, APPLE URGG
    operating system: whatever the latest available to itouch is.

    Without knowing what the error message said all I can suggest is:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod classic 120 stuck in disk mode, not recognized by windows or itunes

    so ive been havin tons of problems with my new ipod 120 classic
    first one day when i plugged it in it told me it was corrupted and needed to be restored
    then it would not restore
    i formated it with windows but that didnt seem to do anything
    the other night somehow i got it to the point of naming my ipod but after that, it stopped working again
    for a while i couldnt even put it into disk mode
    now, when it is plugged into the computer it is stuck in disk mode, yet not recognized by the computer or itunes
    it makes the sound when i plug it in but never shows up
    also, when its not plugged in, it starts up and just brings me to a screen that says use itunes to restore. but then i plug it in and it goes right to disk mode and do not connect, and isnt recognized
    when i unplug it i can see it pop up on my computer for that one second i unplug it
    ive tried this on a number of computers and it does the same thing
    when i unplug it from being plugged into the computer it just sits in diskmode saying ok to connect
    if i reset it by pressing center and menu, it just goes back to the use itunes to restore screen
    i cant get it to enter diagnostic mode, and when i hit center and play after center and menu it does nothing either
    ive just about had it with ipods
    this is my 3rd or 4th classic that i have had problems with
    apple should be ashamed of themselves for such a buggy product for so much money, and very very crappy service
    any help greatly appreciated....but im prety sure ill be moving onto another product after this
    luckily i am still under warranty so they offered for me to send it in....but then i am without music for about a week
    i feel i should be compensated for that alone, aside from just fixing it for me
    please help me fix this so i can get back to some tunes!
    thanks for any info

    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • TS1369 Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode."  The ipod is no longer being recognized by itunes.

    Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode."  The ipod is no longer being recognized by itunes.

    I am having the exact same problem.  My ipod has been stuck in disk mode for over two hours and now itunes is frozen.

  • Macbook Pro 17" (Mid-2009) Randomly Getting Stuck in Sleep Mode when Unplugged

    Hey guys, this is my first time posting so please excuse me if I do anything wrong. Here's the issue:
    I have a Macbook Pro 17" (Mid-2009) that has had an issue with the whole computer shutting down at random, but only when unplugged from the MagSafe power adapter. Upon scouring all the forums and discussions I could, I haven't found anyone with the same exact circumstances as myself, hence this post. Let me explain.
    Many say it's a battery issue. That can't be, because this has been happening for months, and after I finally got my laptop repaired a few days ago, it still occurs. I had sent it in for a logic board failure, but consented them to fix any other parts that weren't functioning properly. Upon the return of my machine, I found that they installed a fresh hard drive, new battery, new logic board, and a new speaker on the right side. This must mean that neither the logic board nor the battery are the issue.
    What else can this point to? Again, it only occurs when the Mac is unplugged from a power source, and it doesn't totally shut down. It goes half way, essentially stuck in sleep mode. The white indicator light on the front freezes, and the power button has to be held to fully turn the laptop off, then pressed again to reboot. It can last anywhere from a single minute to a few hours before shutting off again, and it's always the exact same circumstance, no matter what kind of computing I'm doing at the time.
    Note that while no one else has found the solution to lie within resetting the PRAM or SMC (in the discussions I read), I still need to try that tonight and see if it affects anything.
    Thanks in advance,
    Sean

    Macs are having problems with SSD drives. The root cause is the OS X journaling file system. The Apple-written SATA controller driver can saturate the bus at times, inhibiting performance. Some manufactures are even selling special "Mac" versions of their SSD drives that are slowed down on purpose to compensate for this problem. Unfortunately, the problem still exists in Snow Leopard, from what I've read.
    Also, I read that Apple has secretly slowed the recent new laptops down (3.0GB/s to 1.5GB/s) to compensate for the problem.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • MacBook Pro- Stuck in safe mode!?

    Hi, I am a first-time MacBook user and need a little help...
    I am running lion software and recently performed a software update (pop-up screen general update). Since doing this, my Mac is now:
    - Only allowing me to type in Shift Mode i.e. I cannot type '1' but it types '!', '3' becomes '£', etc etc
    - Stuck in safe mode
    - Will not recognise any USB's (however i suspect this is because it's stuck in safe mode!)
    Any help would be much appreciated??? I cannot use it any more, and it makes me just want to get rid of it! :-(
    Thanks in advance....... :-)

    Try resetting the SMC - http://support.apple.com/kb/HT3964 - see the drop-down menu on "Resetting the SMC on portables with a battery you should not remove on your own."
    Good luck,
    Clinton

  • MacBook Pro stuck in sleep mode: can't restart or shut down, black screen

    I'm running the latest version of Snow Leopard on my mid-2009 MacBook Pro Unibody. After installing the latest Software Update, including a Firmware update for my SuperDrive, the following problem has occurred, for the very first time:
    I closed the lid of my laptop for the night, as I do routinely every night, thus putting my MBP to sleep. I leave the various apps open, usually Firefox, iTunes and Entourage. The next morning my MBP felt hot and the screen remained black... it would not change. After repeatedly trying and failing to clear the black screen and bring my apps up, I held the power button down to do a complete Shut Down. My system turned off, but did not do an actual Shut Down. When I press the power button to turn it on, it comes right back into sleep mode with the screen remaining black. I cannot seem to force either a Shut Down or a Restart. I unplugged all peripherals and the power cord, let my MBP cool down completely--for a couple of hours-- and tried everything again. Still no change: I'm stuck in sleep mode with a black screen. I've also tried resetting the PRAM and the SMC, but neither works, probably because I'm not coming from a Shut Down. Is anybody else having this problem? Anyone have any suggestions? I think the problem must be somehow related to the latest update, but whatever it is, I'd like to resolve it.
    Thanks in advance for any help.

    I can't get into my system to see my update version, but I'm certain I'm running the most up-to-date version of Snow Leopard and all other latest updates applicable to my mid-2009 MBP, as I run Software Update routinely. I thoroughly completed all update installations, including the SuperDrive Firmware update, followed all instructions meticulously, including rebooting, and actually used my system for at least one full day without any problems. I'd even recently repaired all permissions. Everything was "humming" along very well. This problem came totally out of the blue. Because the screen is black, I can't actually see what's on it; however, I've put my MBP to sleep every night by closing the lid and it awakens in the morning when I raise the lid. This time the sleep light indicator is on, but nothing happens when I lift the lid, touch the track pad or a key. If I hold the power button down briefly, the sleep light goes out, but when I press the power button again, the light comes right back on. If I depress the power button for several seconds, to initiate a shutdown or restart, it simply shuts off the fan and refuses to completely shut down. This is evidenced by the fact that depressing the power button to start up brings the sleep light on very quickly. I can tell by the way the system sounds that it is on behind the blackened screen. Sorry I can't get you the update versions.
    Thanks

  • Help! I finally decided to update my ipad from itunes/laptop & now its stuck in recovery mode!

    Hi guys. I just saw this same question from someone else but after i logged into support I cant find the post anywhere. I hate asking again, sorry for asking again, but I need HELP and cant keep searching the posts.
    Ive never updated ipad 2 before and not really good with computers. When trying to download certain apps, it would stop installing & tell me i needed to update to the latest update. Finally updated the ipad & i think syncd it but when it was done the only thing that showed up on screen is the RESTORE picture. I just realized that if i restore i will loose all my Memos & Notes. I DONT WANT TO LOOSE THEM ! I have info on ipad memo that I really need & that i didnt write down anywhere else. Is there a way to save my notes/memos/data before I restore the ipad? Ive gone 5 days without it and really need to use it. Am i just out of luck :{ ?
    There was an answer by someone about restoring an ipad giving directions and after the restore it will ask u questions that u have to answer YES to. She had school notes and the other guy had 600 pics. The girl stated she did all the steps but she didnt see anyplace to say Yes and she lost everything. Im afraid to risk it and will take it to a store or something if theres away they can do it.
    I babbled and im sorry if this made no sense so heres the clear question : Is there a way to save your memos, messages, notes, contacts, etc from an ipad that is stuck in restore mode BEFORE U restore? any help will be so appreciated !!!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • Mac stuck in safe mode start up loop

    Hi everyone,
    it seems I have run into a problem and can't find answers online.
    First off I have a MacBook intel core duo on the latest snow leopard and mac software is up to date.
    It all started when I had to restore my iPhone and it had some problems and got stuck in dfu mode, so when I decided to reboot it I unpluged it and went to reboot and problems started. Finder kept crashing. When I started up in safe mode I decided to save some important files and when I was done the finder problems persisted even while in safe mode. When I rebooted it would start up in safe mode and the loading bar on the bottom would get about a fifth of the way and stop, it would try again and get the as far as before and then shut down.
    I tried taking out and putting back in the HD and ram as well as verbose mode. It says
    Disk0s2: I/o error
    invalid node structure
    (8, 12827)
    **the volume mac HD could not be verified completely.
    /dev/rdisk0s2 (hfs) exited with signal 8
    When I decided all was hopeless I tried reinstalling the os but it got stuck on examining additional disks.
    If you need any info let me know. HUGE thanks ahead of time as I am writing this from my iPhone 2g and have a useless MacBook and dfu'd iPhone 4.

    Restart from your installer disc. Do not run the installer. Instead, from the Utilities menu select Disk Utility & run its Repair Disk step. If it can repair the HD, try reinstalling the OS again. If it cannot, you can try a more powerful (& expensive) disk repair utility like Disk Warrior, which may or may not be able to repair the damage. Otherwise, you will need to reformat the HD (losing all its data) to recover.
    You should always have a backup of your data. If you do not, it may be worth gambling on the price of Disk Warrior, but remember that there are no guarantees it can repair the damage.

  • My MacBook screen is stuck in "presentation" mode after using my "Mini DisplayPort to VGA Adapter." How can I fix this?

    My MacBook screen is stuck in "presentation" mode (I don't know the correct term) after using my Apple Mini DisplayPort to VGA Adapter - meaning the screen fonts and windows are larger than usual. How can I fix this? I've changed the display settings to modify it a little, but it still doesn't look right. I reinserted the adapter numerous times and restarted my computer, it still hasn't worked. Help!

    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

    I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • IPhone 3gs stuck in recovery mode, firmware iO 5

    My iPhone is stuck in recovery mode. I have a 3gs, firmware 5.0.
    Before I tried to restore it, my iPhone would randomly shut off, turn back on, and display a notification that said "Activation Required." Now, sometimes my phone would shut off again and return to it's previous working state. However, this time it did not. I put the phone into recovery mode and tried restoring it on my Acer Aspire 1 with Windows 7. iTunes put the phone through the various stages of restoration; Extracting Software, Preparing iPhone for Restore, Restoring Software, Verifying Restore, Restoring Firmware. After all of this, a nice little error message pops up that reads, "The iPhone 'iPhone' could not be restored. An unknown error has occured (1)."
    After this little mishap occured four more times, I decided to click "More Information," and was promptly brought to the help page set up here. I proceeded to troubleshoot by updating to the latest version of iTunes, updating my security, restarting my computer, and so forth until all the necessary precautions were performed. Now it was back to iTunes to try my luck at getting my life back.
    To my delight, I found that this time the restoration process took upwards of forty minutes to complete. However, to my despair, a nice little error message popped up that read, "The iPhone 'iPhone' could not be restored. An unknown error has occured (-1)." Ah, a different error message! i thought, feeling as if there was hope in fixing my phone. I clicked "More Information" and skimmed through the specific error messages, looking for that lucky -1. Nothing.
    I need help. I have attempted to restore my phone a dozen times since this occurence, and I'm growing tired of going through the same process over and over and getting the same result. My phone is stuck in recovery mode now. I've tried restoring the phone on 2 different computers, to find out if, in fact, the problem was my iPhone and not my computer.
    Some important information you may need to know in order to help me solve my problem:
    iPhone 3gs
    Running iOS 5.0
    Using iTunes 10.5
    On an Acer Aspire One Netbook
    Running Windows 7
    All security updates installed as of November 7, 2011
    Also iTunes 10.5 on Acer Aspire 57354774 laptop
    Running Windows 7
    Reply ASAP with a solution please!

    Hello,
    I have an iPhone 3GS which I updated with the last firmware (iOS 5) 2 weeks ago. Everything goes ok.
    And suddenly, while the phone was recharching. It asked me to activate it but I was unable to do it as it was rebooting constantly every time I connected it to iTunes.
    I tried both 2 restore modes (Restore and DFU) but since I can't achieve a restore with the last Apple iOS 5 firmware. I got the error code 1.
    I I tried on 3 different computers but same error. I really don't know what to do next...
    I already called Apple Customer Care and I'm still waiting for an answer. I let you know.
    And you, did you manage to get your iPhone back alive ?

Maybe you are looking for

  • An array and scalar values together in an sql statement

    Hi We have a table called SERVICE and following are the 3 columns from SERVICE table, SERVICESTATUSID - NUMBER(10) ACCOUNTID - NUMBER(10) SERVICENUMBER - VARCHAR(41) My aim is to be able to update the status of a bunch of entries in this table from P

  • PAI not getting triggered.

    HI, I have a code as below. The PAI module is not getting triggered. I guess something small is missing but I am not getting it. YOur help wud be appretiated and rewarded. Thanks ================= PROCESS BEFORE OUTPUT. MODULE STATUS_0100. LOOP WITH

  • Duplicates of songs - filling up my library! NEED URGENT HELP

    I have duplicates of almost all my songs in iTunes and they are filling up my library. Is there a way to make only one of each song? Maybe a software app? Thanks

  • Show information for BPM process instances to possible future assignees

    Hi all, My environment is 11.1.1.4. I want to develop an ADF application that shows users information for BPM process instances which will possibly produce a user task assigned to them in the future. What I have done is 1. Get BPMAppRole from the use

  • OIM 10g Utility Factory code -- Upgrading to 11g

    Hi all, I have a custom code in 10g which accesses the OIM API. It uses the UtilityFactory methods. We are now moving to 11g and I looked at the 11g documentation and see that it has the "OIMClient". It looks like it still supports the UtilityFactory