Sony DHR-1000 DV VCR no longer recognized

Pre-Tiger, I recall using my Sony DHR-1000 DV VCR in iMovie on my PowerMac G5 (which I sold). It's also in Apple's device compatibility list for older iMovie versions. But the VCR is no longer recognized on either my iBook or my Mac Mini. Both are running Tiger and iMovie HD. The VCR doesn't show up in the Firewire section of System Profiler. My Sony HDV camcorder shows up fine on both computers using the same cable.
Was DHR-1000 support pulled from Tiger? Are the iBooks and Mac Minis different in some way than the G5 PowerMac?
This is a $5000 VCR and it's now useless without Firewire import capability!

Aha ChromePlanet !
We share the same problem-mine in PAL.
This excellent link will take you to the some of the answers/noted problems.
http://www.sjoki.uta.fi/~shmhav/iMovieHD_bugs.html#quick_DVimport
I'm back to using iMovie 2.1.2 on a G5 2GIG so I can reliably do a long project with the DHR-1000. It can only be described in polite/very polite terms as "ridiculous."
Here's why:
1- iMovie 4.01 will import but on playback but will constantly have digital artifacts overlaid on viewing to external TV monitor. Pulling in/out the firewire cable from the deck (2x after a long moment each time)temporarily restores the picture until I click on a clip, bringing on the problem again. The solution is to use a camera to be able to view externally. Even then, I often have to reboot the computer otherwise there is no recognition of even the camera.
2- iMovie 3 similar problems
3- iMovie 2.1.2 works with Sony deck. instant playback view via external Sony deck.
Most of my projects are 2-4 hours. There is no other way to archive these without a DVCAM tape. Thus iMovie 2.1.2 is for me the only one of these versions I can trust.
And iMovie 5???
All the great advances in flexibility since version 2 mean little/mostly nothing in practice. So you have to ask Apple-Why is the firewire signal so weak in imovie?. I have asked , but no reply....
Was the Powermac you sold running Panther? Is that why the Sony deck was recognised?
Regards
Mark

Similar Messages

Sony dhr-1000 very bad deck .....

G4 dual 1.25 GHZ / 2GB ram/MAC 10.4.6 /FCP 5.0.4/TOAST 7.0.2/ILIFE O6.
2 internal DRIVE of 120 GB/4 external FW drives/2 pci FW-USB cards.
pci cards in slot 2 & 4.
this deck is not working with FCP or TOAST or whatever ......i think.
but the camcorder dcr-vx1000 work perfectly with all the above .......
what cause this bug ..... is it a FW bug .....why only with the dhr-1000, i got 2
dhr-1000 deck who display same problem .......
any feedback or work around posssible ..... i you got contact with sony please
forward this to them ..... this deck is similar to dvcam dsr-30 sony deck.

Daniel,
I have the Sony DHR-1000. Cost a bundle 4 or 5 years ago when I got it and it is one of the best purchases I have ever made--I love it. Have had it adjusted twice. Works flawlessly for me. Have used it with at least 2 different G4 computers and am now running it on a G5 DP2.5, OS 10.4.1, 4.5GB RAM, FCP 5.0
Sharon

Sony Cybershot No Longer Recognized in iPhoto

Just did a recent software update that my iBook let me know about this past Saturday. One of those updates I installed involved something to do with importing pictures from cameras. Now, my Sony camera is no longer recognized in iPhoto and I never had any complication with this before the update. Is there a way to reverse the installation of the upgrade or is there a soltuion?
Message was edited by: JC Santos

This sounds more like a software problem than an iBook problem. You might try posting your question in the iPhoto forum where all the smart photographers hang out. They probably have experience in dealing with this sort of issue.
Good luck!

Sony Handycam HDR no longer recognized

I have a Sony HDR HDD camcorder that, for quite a while now, had no issues with its 4pin DV-USB cable (that came with it) connection to my Mac Pro being recognized by iMovie 9. I haven't made a video in a couple of months, but recently, I filmed about 3 hours worth of wedding footage, connected the camcorder to the Mac as before, iPhoto recognized it instantly (and auto-launched as always) but iMovie refuses to believe the camcorder exists.
I've been told that no stores sell Sony's proprietary DV cables for their products (which makes since as universality would only benefit consumers and not businesses). Additionally, some go so far as to say Sony doesn't even make such a firewire cable to handle an issue wherein iMovie 9 now requires a firewire connection—or so I've heard.
1) Has iMovie 9 been nerfed in some update that now requires camcorders to be connected via firewire now.
2) If so, is there some method to import the videos either directly to the finder or into iMovie without the need for a potentially non-existent DV-Firewire cable?
PS: The connection is no longer recognized on my iMac as well.

Well… I opened Image Capture with the camcorder plugged in and modified the "Connecting this camera opens…" menu to be iMovie. Unfortunately, all that resulted in was opening iMovie upon connecting the camera. iMovie still refuses to acknowledge that the camcorder is connected.
Related: This is my work machine, wherein we do moderate amounts of video capture and I am using iMovie '08 7.1.4 on OS X 10.6.8. I'm really disappointed in Apple having altered something within iMovie (or the OS) that prevents the camcorder from being recognized. The last import I had performed was March 25, 2011.
More info regarding the camcorder: Sony Handycam HDR-SR11 60GB HDD. I am going to try to burn straight to DVD and then try and import from that, but that is, of course, not ideal. I'd much prefer to import into iMovie directly from the camera as I used to be able to do.
EDIT: I'm guessing you need to install the Picture Motion Browser software for the Disc-Burn feature of the camcorder to work. And that is only available on a Windows-based PC.

Sony no longer recognized

I recently upgraded to Tiger and now find that my Sony DCR-TRV11 camera which previously was recognized and used in iChat no longer connects. The camera icon appears but when I click the preferences it states that the "Camera is in use by another application." I do NOT have any other applications open, however.
If I go to iMovie the camera is completely recognized. It is only in iChat that it no longer appears.
Any suggestions?

HI Jazz Plubmer,
Try this Quicktime 7.0.1 reinstaller
If that does not work try this
Make sure the camera is out-putting DV signals.
Ralph

USB devices all of a sudden no longer recognized in windows 7

Hi,
I am using a HP Pavilion Simline s5550nl edition with windows 7 home premium (64-bit) since 1.5 years. Never had any problems until 3 days ago. Since 3 days suddenly some new devices, already plugged-in devices and previously used devices are no longer recognized (USB-device not recognized-error after plug-in).
I used an USB-mouse, USB-keyboard, Smartcard-reader, Sony Story 1.5TB External HDD, USB WebCam. They al worked fine.
3 Days ago I bought a WD Elements 2 TB External HDD. After plugging in, it was not recognized at first. Replugging it in it was recognized, but trying to open the drive in Explorer, it gave a not-formatted-error (while the disk should have been pre-formatted for Windows 7). However, i tried to format the disk, but it could not reach it any more. After rebooting the system the WD elements HDD gave the USB-device-not-recognized-error, using all other USB-ports didn't change that. In fact my Sony External HDD was no longer reachable either. Unplugging and replugging it in gave the same USB-device-not-recognized-error. Trying previously flawless working USB-devices all gave the same USB-device-not-recognized-errors (USB-flash disk 4GB, External HDD 2.5inch 160GB, USB-/card reader HUB, iPhone).
I then tried to connect my Sony and WD external HDD on my other computer with windows XP SP3. They were recognized within seconds and working fine (also the WD elements External HDD indeed turned out to be pre-formatted).
Strangely enough my USB-mouse, USB-keyboard and smartcard-reader kept being recognized at plug-in. Furthermore, my printers (connected over LAN) and NAS (connected over LAN) were usable without any problem. I did not encounter any other problems in functionality of windows. I then thought it might be a corrupted general USB-driver for mass-storage or something, so I started to google this problem. Things I have done so far (before each step I unplugged all USB-devices, rebooted and reconnected the devices):
- Turning computer off, unplug power-cable for 2 minutes, reboot.
- Updating BIOS to version 6.04 (was running version 6.02).
- Uninstalling all USB-devices/mainhubs etc in devicemanagement, automatic reinstallation at restart.
- Try installing newer USB-drivers for mainhubs, messages the installed drivers are already the latest.
- Uninstalling all 'hidden' USB-devices.
- Trying to go back to configuration of 1 day ago (maximum i could go back), resulted in an error that the file might be corrupted.
- Turning computer off, unplug power-cable overnight, reboot.
- Running HP-systemdiagnostics: all passed.
- Running Norman anti-virus scan (latest update): no infection.
- Again uninstalling all USB-devices/mainhubs etc, automatic reinstallation at restart.
I also noticed that during the night before this malfunction appeared (so actually several hours), on january 20th, an automated microsoft critical update was installed (some anti-spyware definition update). I am now thinking it might still be a driver-problem of some sort of general USB-mass storage driver or due to this microsoft update or maybe some clever virus.
I no ordered a Recovery disk (never had to use one, so did not jet own one), to recover windows and if that doesn't help reinstall it. However I hope that anyone can bring up a solution that I am overlooking?
D. Berks

OK, meanwhile I found that only uninstalling the USB2-driver enables the USB-ports again. Uninstalling it makes al devices recognizable, whil reintsalling it immediately makes all USB-devices unrecognizable.
I tried updating the driver to the latest version, deleting it (after reboot an automated reinstall is triggered), but nothing helps. As if soething that stays in the system makes USB2 to corrupt USB-channeling or something.
I strongly believe that it has something to do with the windows-update, but I can nowhere as a question about it to microsoft (will cost 70 euro's!).
Does anybody knows what this could be? Or better: knows of a solution?
Tanks,
D. Berks

My mac is no longer recognizing my phone and I cannot manage the music on my phone. What can I do?

My mac is no longer recognizing my phone and I can no longer manage my music. How can I change this? I cannot upload IOS 7 because I have too much music on my phone and not enough space, but I cannot delete music on my phone because my computer will not recognize my phone.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

Trial Première pro CS3 combined with Sony DHR-1000NP/No sound rendering the Première Project

Dear friends,
I am a belgian and I have many years of good experience with Pinnacle DV500, Adobe Première 6.0 and the Sony DV Recorder DHR-1000NP.
As I want to make a further step, I downloaded the trial of Adobe Première Pro CS3; I installed this trial on 2 OTHER computers, Windows Professional XP , SP2. With both I have the same problem!
I get good .avi's from my DV tapes, played with the same Sony DV Recorder DHR-1000NP, over a fire wire, connected with the OHCI of the computer.
When playing the obtained Première project, the video and audio on the screen and the amplifier of the computer, are perfect; the videosignal over the firewire and the Sony DV Recorder DHR-1000NP is also perfect, but there is absolutely NO audiosignal reaching the Sony DV Recorder DHR-1000NP.
Who can explain me how I should manage that problem?
Thank you for helping!
With my best regards,
Marc

Beste Marc
Ik heb vandaag de upgrade gedaan naar Premiere Pro CS3. Ik werkt normaal op XP Pro, met capturekaart DVStorm2 (waarmee ik via Premiere Pro 1.5 goed kon werken. Hierop hangt mijn Sony DHR-1000NP.
Na de install van de CS3-versie heb ik geconstateerd dat de DVStorm2 niet meer werkt. Dus ik naar de winkel om een PCI-poort IEEE1394.
Het rare is nu...
wanneer ik de DHR-1000 hierop aansluit start Premiere CS3 op, maar vertelt me dat ik niet in EDIT-mode kan. Capture-window opent, ik kan de video besturen, maar de record-button is disabled.
Met een kleine camera (sony DCR-trv270e) lukt het wel.
Mijn vraag... hoe heb jij jouw DHR-1000 aan de praat gekregen?
Er is duidelijk niets mis met de PCI-kaart, wel met het toetsel dat ik aansluit.
In configuratiescherm komt onmiddellijk wanneer ik de DHR-1000 aansluit een "other devices" warning, geel vraagteken, met AV/C tuner, driver not installed. DOen heeft geen zin, er is geen driver voor.
Ik zou het echt op prijs stellen mocht je me op de goede baan brengen. Ik wil je eventueel eens bellen... mijn nr is 0485/30 31 97.
Van harte bedankt
Stef Ryckmans - Kortenberg

My 4th Generation click wheel 40 GB iPod is no longer recognized by iTunes.

Hi There,
The title actually says it all..
(My 4th Generation click wheel 40 GB iPod is no longer recognized by iTunes 7.4.2, although the iPod works fine.. iTunes keeps saying to reset it, but I don't see why I should)
The iPod seems to work just fine, so I'm not in a big hurry to erase all my songs audio books etc..
I am thinking that this is a problem with Macintosh iTunes version 7.4.2, from what I'm seeing, but how should I proceed?
Many thanks for any help.
Eric

Sounds like a dead battery. Take it into your local Apple store/Genius bar and see if there is anything they can do for you. Another option is to send it in to a third party repair company who can replace the battery at a pretty low cost.
B-rock

IPad no longer recognized by any computer after 4.2.1 update

Hi,
my iPad is no longer recognized by any computer after the 4.2.1 update. It does not show up in iTunes and this even in recovery mode. When connected to charger it does not show that it would charge (but it does). The iPad is still usable except in the iPod app is says "cancelling sync" and does not show any music.
I already reinstalled iTunes, reinstalled the Apple Mobile Device Service, used different computers with different OS version, but it does not show up, not even in the system profiler (USB tab).
Any idea what I should do? I mean it is quite unlikely that there is a hardware issue as the problems appeared right after the 4.2.1 update (from 4.2).
Thanks in advance

Yes I know, I already reset like 100 times. Turned off-on...
I guess a recovery could solve the problem, but how do it if the iPad does not even appear in iTunes. I guess it is somewhat stuck in "cancelling sync" and therefore will not accept an USB connection (the USB port behaves like it is deactivated).

HELP!!! External eSATA no longer recognized by DVR

Hi, I am experiencing a problem with my external WD eSATA harddisk. The setop box was recognizing it perfectly and I was recording programs with no problem. Suddenly the DVR does not show the drive any longer. I tried unplugging and rebooting. Did not fix the issue. I need help: what should I do???

Xpetepan wrote:
Hi, I am experiencing a problem with my external WD eSATA harddisk. The setop box was recognizing it perfectly and I was recording programs with no problem. Suddenly the DVR does not show the drive any longer. I tried unplugging and rebooting. Did not fix the issue. I need help: what should I do???
I had the exact same thing happen and you aren't going to like the answer/solution. One day my eSATA just disappeared, the DVR no longer recognized it. I unplugged, rebooted, reset, reconnectedetc. etc. and nothing. So I thought it was a DVR issue , after working with Verizon Customer Care Verizon sent me another 7232. I connected the eSATA to the new 7232, alas still nothing, it was not recognized. Turns out it was not a DVR/FiOS issue, the eSATA went bad (after 12 stinking days!!!!!!!!!!!!!!!). Western Digital eSATA's are junk. I contacted Western Digital and they sent me a new eSATA (if it is still under warranty they will replace it for free BUT you have to pay all shipping costs), I connected that and it works just fine (but I am holding my breath, it has been 11 days since I connect the new one).
If the eSATA is bad you need to contact that Western Digitial, NOT Verizon. If it is bad it is not a Verizon problem.
And the Verizon In Home Agent is pretty much useless, that did nothing except waste a lot of my time.

Since installing Leopard, my iPhone is no longer recognized by iTunes.

Since installing Leopard, my iPhone is no longer recognized by iTunes and cannot synch, my music, videos, address book, and calendar. Could you let me know how I can get iTunes to recognize my iPhone again? It is odd since i plug the iPhone into the iMac and it is no longer recognized in iTunes and my address book and calendar. It worked fine before installing Leopard. You assistance is greatl

Hi
Have you tried the iPhone forum yet:
http://discussions.apple.com/category.jspa?categoryID=201
Steve

My first generation ipad no longer recognized by itunes 12.1.2.27

I just recently updated iTunes to 12.1.2.27 now my first generation iPad is no longer recognized.
iPad Model MC349FD / Mid 2011 iMac 3.4GHz, 32GB ram, OS X 10.10.3

Hello there, Blueye3355.
The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
Apple - Support - iPad - iTunes Assistant
http://www.apple.com/support/ipad/assistant/itunes/
If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

IPhone no longer recognized by ITunes, and Service is not starting

Hi
My IPhone is no longer recognized by ITunes. I already tried the steps on http://support.apple.com/kb/TS1495, but had no luck, and I also tried to remove all relevant Apple software and reinstall, but this did not result in anything either.
Now, also, if I start up ITunes, it tells me, that the "Apple Mobile Device Service" is not running. Trying to start this service by hand, did not work. Following the rules on http://support.apple.com/kb/HT1923 did not work.
I am running Windows 7 Professional 64bit, my ITunes version is 9.0.3.
This is my third PC in this household this has happened (i switched the PCs after it appeared on my other PCs), and I am simply not willing to do that again.
Please, if anyone has an answer, it would be greatly appreciated.
cheers, Roland

http://support.apple.com/kb/HT2553 as a last ditch effort but if it has been recognized by computer before and you did everything in HT1923 and TS1495 then i would say like msconfig stuff or disk cleanup and such.. it would be worth it to contact apple tech support if HT1923, TS1495 and HT2553 doesn't work.

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Sony DHR-1000 DV VCR no longer recognized

Similar Messages

Maybe you are looking for