Sony Docking station will no longer play audio on Alarm after ios 7 upgrade

I have read through many of the community postings and hate to have to start a new question when there are over 90,000 that have viewed or commented on this same type issue, but I have tried all the suggestions from community users and they work for a test, but then when you set the alarm for the next day, it flashes and no audio. Why is it that Apple is ignoring this huge customer dissatifaction and why is it that they can do this to the users? I read in one stream that they inserted a software to block any "Non-Apple" product from working with their new software. I have 3 phones in this house that have not been upgraded and they work fine. The two that I upgraded will NOT play the audio. The light will flash as if it triggered the alarm, but nothing triggers the iTunes to play. Originally Apple said it was my Sony device. Wrong! So then they said it was iTunes because they iTunes Radio was in the first/primary slot now and I had not signed up or created a Radio station. They did show me how to go into More options and change the priority to place my own music and playlist in the primary and get rid of the iTunes radio and it worked. Next day it didn't. Then I read that if you plug into an Apple peripherial and then a Non-Apple device, it will again shutdown. So I have started doing the Shutdown step every night when placing it on the docking station, never knowing if the Alarm will play/sound at 4:50 or not. Needless to say, I am NOT getting any sleep as I watch the minutes tick towards the waking hour anxiously waiting to see if the phone Will or Will not wake me. I have also seen people mention removing the "SoundCloud" What the heck is that and how do you do it?

In my Sync vehicle, I had to "forget" the SYnc connection in the iPhone Bluetooth settings, then go into the car menu and delete the bluetooth device from the vehicle's system. Once I re-paired from scratch, it has been working fine. Give that a try. If not, try removing the connection from both sides again, then Reset Network Settings from the General Settings before re-pairing.

Similar Messages

  • I have a docking station to charge and play audio from my ipod touch 3rd gen.  Just bought a new ipod touch 5 th gen.  Is there a converter/ adapter available so I can continue to use my dock?

    I have a docking station to charge and play audio from my ipod touch 3rd gen.  Is there an adapter available for the ipod touch 5th gen so that I can keep using the old dock?

    Lightning  Adopters
    One of these adopters/cables should work:
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

  • JBL Radial dock no longer works on iPhone 4 after iOS 5 upgrade.

    JBL Radial dock no longer charges my  iPhone 4 after iOS 5 upgrade however I still Can play music.
    Any help on that ?

    OK a bit of success over the weekend. Not sure if it will help you guys. So i have an IPHONE 3gs and it would not play any music through the JBL but it would ring (through the JBL speaker) and charge while connected.
    I sync'ed through itunes and made sure i had the latest version of both itunes and the IOS on the phone. Then pushed some podcasts and albums down from my computer to the iphone through the computer.
    This must have sone something as now everythign works fine. all radio and music apps now play through the JBL.
    Hope this helps.

  • IPhone no longer plays through car stereo after OS 4 upgrade.

    My wife and I upgraded to OS 4 on 6/21. Both will no longer play or charge through the USB connection to our car stereos. We both have Kenwood decks but different models.
    Any ideas?

    Did you look here?
    http://discussions.apple.com/thread.jspa?threadID=2470321&tstart=0

  • HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

    HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

    Lots of people having this problem? Hmm. For what it's worth I haven't seen that problem on my iPad 3
    This is a user to user forum so no one here would have any idea whether there is a real problem and, if so, whether Apple is working on a fix.
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • MOV files no longer play on my iPad after the IOS7 upgrades

    Prior to the recent IOS upgrade to 7, then 7.0.2, I was able to use my camera connection kit to import videos taken on my camera. They played without issue and I was able to share with friends from my iPad.
    Since the upgrades, the files will import then when launched, show an error 'Cannot open' and then play with no audio. The videos will often then play at a faster speed than recorded. They files are useless without the audio. Suffice to say that they play on a PC without issue.
    I desperately need to get this resolved as to why this has occurred. The only thing that has changed is the OS. Video files imported before the upgrade no longer play as before either.
    Please help me if you can.

    No unfortunately not. I don't know how to escalate this to Apple tech but I think that is the next step as I believe it is IOS based problem, not user related.

  • My iPad 2 will no longer connect to the internet after iOS 6 update

    HELP!! My iPad doesny connect tot the internet anymore. I down loaded iOS 6 today (9/19/12) and now it doesnt connect tot the internet anymore.

    Hello dchoffa,
    Thank you for using Apple Support Communities!
    I would start with this troubleshooting from the article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the above troubleshooting does not resolve the issue, I would next try the troubleshooting in one of the other sections down toward the bottom that fits your scenario.
    Regards,
    Sterling

  • IPod on iPhone 3G won't play in my car after iOS 4 upgrade

    I have a 2010 Hyundai and my iPod played fine w/ the use the the Hyundai iPod cable until I upgraded to iOS 4. I used to get the airplane mode warning but once it went away it always played fine. Now instead of the airplane mode warning I get "This device is not optimized for use w/ this cable... blah, blah, blah". I then get a message on my stereo's monitor that my iPod is empty. I have not had a problem playing my music otherwise though, with either my ear buds or just through the phones speakers. I wish I had never upgraded now.
    Anyone else having this problem or have any idea fixes?

    I am experiencing a similar issue to you.
    I have an Oct 2009 Hyundai i30 with a factory option ipod control cable which previously worked perfectly and allowed me to control my 3g iphone's ipod function through the factory head unit of the car, I could select albums, artists, individual songs, playlists etc. Now, after upgrading to ios4 I connect my iphone to the car and I get the new badge message "This accessory is not optimized for use with iPhone blah blah blah". That's fine, I hit dismiss and expect the previously available functionality. However, my iphone will play, but I can no longer scroll through anything on the head unit anymore. I can see what is playing and I can shuffle the library but that is the limit of the functionality through the head unit.
    Before the upgrade I was able to scroll quickly and efficiently through say, the list of artists and choose one, then choose an album and pick a song. Now, I have to choose something on the iphone (before driving off) and then plug the phone into the car to pipe the music through the system. Having said that, the car now has to be running first, before the phone is connected for it to work.
    I have tried the following to correct this:
    + Connect phone to car, hold down sleep/wake and home buttons for ten seconds, wait for apple logo, wait for phone to boot - same behaviour as described above.
    + Start car without connecting phone, choosing AUX on the system, holding down sleep/wake button for a while until slide to turn off comes up, then slide to turn off. Wait until phone is off, then connect phone to car - same behaviour as described above.
    + Sync phone to itunes again, reboot phone with sleep/wake and home button, then connect phone to car - same behaviour as described above.
    This really *****. Sadly, I know, I'm not offering a solution to the problem, but as I have something, I'll post again.

  • Why are my videos no longer showing up in playlists after iOS 5 upgrade?

    Hi there,
    In the past, all I need to do to view my video playlist was to use the iPod app. However, after the iOS 5 update, it appears that the iPod app is gone and its closest equivalent is the music app, which does not list any of my videos that I *know* are present on the iPad. Does anyone have an idea of how to deal with video playlists after the iOS 5 update?
    thanks,
    --Dany.

    Yes, I agree, especially since the Music app on my iPod Touch has more features than the Music app on my iPad.
    It's feedback time to Apple:
    http://www.apple.com/feedback/ipad.html
    http://www.apple.com/feedback/ipad.html

  • Lots of my music will no longer play after latest update

    Hello,
    I have a lot of music that will no longer play in my iTunes after the last update.  it doesnt happen with all my music, but a lot of it, and as far as i can tell, movies and tv shows are still good.  when i click on the song, it just skips forward over a lot of songs that it cant play until it gets to the next one that it can play.  to make things stranger, i synced my iPad to my iTunes, and the ones that cant play in my iTunes will play on my iPad.  when i try to open the song using QuickTime player, i get the following error: error -2002 a bad public movie atom was found in the movie
    what is a bad movie atom and why am i getting the error when trying to play an audio file, and why wont they play in my iTunes but will on my iPad.
    System: Win7 Ultimate 64bit AMD A10 8GB RAM
    iTunes : 11.4.0.18
    QuickTime : 7.7.5
    any ideas?
    thanks

    The contacts is saved on Google or Backup Assistance (Whichever you are using) and you can use ES File Explorer like I posted at http://community.vzw.com/t5/Android-Apps/Simple-way-to-Backup-apps-for-Hard-Reset/td-p/658707 , so you really wont loose anything but apps data...
    BUT, I am not saying that you do this if that is your only issue...  I was just pointing out that this is a good ideal to do with any Major Updates..
    If the contacts isnt linked again you should get the option to link them again once the OS boots, normally it checks and then prompt to link again..

  • My ipod is not playing on a Sony docking station and it is supposed to be compatible with it?

    My ipod touch is not playing on a Sony docking station....what do I need to do??

    - Is the iPod fully seated in the dock?
    - Does Sony say it works with you model iPod touch and iOS 6.0.1? Sometimes an iOS update will break compatibility.
    - Does it charge?
    - Have you reset the dock?
    You can try the following. Sometimes it works.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • My Ipod 4th gen with 6.0.1 ios won't play on my sony docking station.  I have allready reset all my settings.  Is there anything else I can do?

    My Ipod 4th gen with 6.0.1 ios won't play on my sony docking station.  I have allready reset all my settings.  Is there anything else I can do?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    Does Sony say it will work with a 4G iPod with iOS 6.0.1? Sometimes an iOS update will break compatibility.
    Do you have the latest firmware on the dock? Go to Sony's website and check.

  • Iphone 3 won't play on sony docking station

    My iphone 3 won't play music on our new sony docking station, however, my wife's iphone 4 will play music.

    Great. Thanks for sharing.  Do you have a question?

  • A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

    I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
    I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
    Disheartened apple fan.

    Welcome to the  discussion forums.
    Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

Maybe you are looking for

  • Get Blackberry to unleash the full power of the Q10 Keyboard.

    About me: * A  am a heavy Blackberry user and developer since the 7200. * I Love BB Keyboard because it's a workhorse, it just gets thinks done faster. My Feedback: * Q10 is still missing lots of the keyboard Magic of the 9900  How Can this be done..

  • How to remove an ImageIcon from a JPanel.

    I'm kind of new to java, and I'm trying to write a simple program that will change a picture in a window when a button is clicked. Is there a simple way to remove an ImageIcon from a JPanel. I tried the remove() method, but it says there is no constr

  • Get current item id using JavaScript Client Object Model

    I have a client query that query SharePoint list Items. Lets say it is a document library. I need to get the list item id of each.  I can query the Title of the document using this syntax. ctx.CurrentItem['Title'] But when I try  ctx.CurrentItem['ID'

  • Brackets in csv file generated by BI Broadcaster

    Hi all, Here is my problem: I generate a csv file using the BI broadcaster (BI 7.0). It works, but each field of the file are between brackets. i.e: "13.11.2008";"63417440";" EDT";"101";"780032";"1452";"8EAE";"1.141,000" instead of: 13.11.2008;634174

  • Android: Textfield-Cursor movement not working in Portrait

    Hi, I just deployed a new build of my Android apps with Air 16.0.0.272 and I noticed that while Portrait mode, I am unable to move the cursor in an Input Textfield with text by tapping at the location. Instead the cursor will pop up before the first