Sony HVR-M25E not recognized anymore in FCP 6.0.3 update

Hello,
The HVR-25ME is no longer recognized for Print to video.
At First I thought i might be a Leopard Problem but it's the same in Tiger.
The HVR-M25E Sony HDV recorder was recognized with 6.0 but no longer in 6.0.3.
Any ideas?
Thank you for your time,
Steve Pittoors

Wipe your hard drive and reinstall your cloned version of the system disk that contained the version of FCP before you updated. If you don't have such a thing, now you know why we recommend that you should.
If 6.0.3 truly broke your deck connection, you will need to erase the system disk and reinstall OSX and your apps. Stop at the last working configuration.
Be sure to clone the drive before you erase. There may be things there you'll want later.
Good luck,
x

Similar Messages

TS1410 My ipod nano 2nd generation is not recognized anymore by iTunes 11.1.5 whereas it was recognized by previous version of itunes

Hi,
I encounter a problem with my ipod nano (2 nd generation) because it not recognized anymore by itunes. When I say not recognized I mean that the ipod does not appear in the devices field of itunes. I do not know exactly when this problem appeared : i do not synchronize often my ipod but before with my macbook pro the synchronisation worked. iTunes sees others devices such as my iphone 5 and iPhone 4 with respectively iOS 7 and iOS 6.0.1. My macbook pro is updated with Maverick 10.9.2 and itunes is the 11.5.5 version. My MacBook pro is from 2009. With previous version of iTunes I know that my ipod could be synchronized.
I did not find any solution on the Apple Support, so I decided to send this post. If someone already encountered this problem and found th solution it would be very helpful ....

Hello, Jonny-CH.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Cheers,
Jason H.

When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?

CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?

Error "The serial number is not valid for this product" | Creative Suite

TS1538 Itunes not recognizing my Iphones. I've tried updating the itunes, cable is fine, and even re-installing itunes. Plz help :(

Itunes not recognizing my iphones. I've tried updating the itunes, cable is fine for the iphone, and re-installed itunes. Plz help

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

GeForce4 TI Video Card Not Recognized Anymore?

For about almost a year, the fan on the GeForce4 TI video card would occasionally make a grinding noise, although it has always been easily fixed by lightly sticking a finger on the fan to stop it for a second and it would go back to normal.
However, about a month ago this little fix stopped working. The grinding noise was unbearable. After searching the Internet for a few minutes, I found out that I wasn't the only one suffering from this problem, and some even offered tips on how to replace the fan.
I followed the steps very carefully and made sure the card was not harmed. After installing the new fan, which was very easy, I stuck it back into the Power Mac and boot it up. However the monitor didn't find a signal.
I was glad that I installed Remote Desktop on the Power Mac so I was able to connect to it and see what's going on. I opened Apple System Profiler and noticed that the computer isn't properly recognizing the graphics card anymore! Instead of the very detailed information I'm used to seeing, this is what I saw below:
pci10de,a:
Type: VGA-Compatible Controller
Bus: AGP
Slot: SLOT-1
Vendor: nVIDIA (0x10de)
Device ID: 0x252
Revision ID: 0x00a3
I have no clue what this means as it seems like the computer still recognizes A video card. Also this also gave me the impression that the Power Mac is missing the drivers, but that's impossible as I haven't touched the software on the hard drive and nVidia drivers are part of OS X.
If the card is broken then fine, I'll take my losses and buy a new one as I would hate to just throw the computer away since it still more than fulfill my needs. But I just hope the AGP slot isn't broken.
Any ideas? Thanks in advance.

Just for clarification:
You have two systems based on the same MS-7008 mainboard, correct? Both use the same BIOS Version?
In one system, the card is functioning, running in AGP 3.0 Mode x8 and in the other, same mainboard model, what are the symptoms of "video card not recognized" besides the AGP 2.0 Mode x4 limitation?
I mean, if you can see the BIOS Setup, the card is putting something out on the screen, right?

All functions and color are not recognized anymore

After installing Xcelsius 2008 SP2, some functions of Xcelsius are failed : the colors in the palette are
black and it's not possible to return at a begining configuration after uninstalling and reinstalling Xcelsius.
Configuration :
Xcelsius SP1 or SP2 (FP1)
Windows XP SP3
BO XI 3.1
Microsoft Office 2007 SP2
Now I can't change the colors anymore, all is black and all the value put in the spreadsheet are in "NaN" !!
I thought my regional settings in French was not recognized so I change all the Language in English pour it has not resolved my problem.
I tried to repeat this problem on an other computer but all was working !
Please have you ideas ?

Sorry I'm not in the right Menu because my problem is about Xcelsius !

Ipod not recognized anymore

My old laptop used to recognize my ipod using usb but only when it was fully charged and even then it would only recognize it some of the time. It also wouldn't ever charge through my computer and the ipod updater never worked. Eventually, that computer stopped recognizing it all together and I didn't even get the do not disconnect screen. In the meantime, I picked up a new laptop thinking maybe I had bad usb connections but I still have the same problem. I have lost all of my music files off of Itunes (due to my own fault of reinstalling windows without backing up my files thinking that might fix) but still have them on my ipod. Is there any way to back up my ipod and how do I restore it (or back it up) when it isn't recognized my my PC? I have tried new cables etc. and am convinced the problem is with my ipod. Any ideas?
Toshiba Satellit Windows XP

hi jpratt!
given that you've got a Toshiba, we'd probably better check up on this issue first:
iPod not recognized correctly on Toshiba laptop
keep us posted.
love, b

Airport Extreme base station not recognized anymore by Airport Utility software

Hello,
I just encountered the problem today.
I have old Airport Extreme base sation (mushroom design).Picture below.
I have iMac 24". About this Mac Picture below.
Obviously, Airport Utility has been updated recently and today my network is not valid anymore, as well as the mushroom is not managed by Aiport Utility softwrare anymore. The only way to get WiFi now is using my computer as an antenna via the sharing of internet trough its WiFi card: not satisfactory.
The message of the software led directly to this support community.
The picture with the base station icon says: "this version of Airport Utility does not support this base station. To know more, check the Sevice and Support Community."
I did reset the base station may times, without success. I can't rename the base sattion, i can't create rename my network, i can't set up password access, i can't use WiFi other than the default Airport Extreme network.
Since this is not my field of knowledge, would anyone come up with a brilliant solution other than .... :
"Did Apple just manage to make you buy a new Airport base station ?."
Thank you for your time.

Hello,
Thank you for your reply and exlpanation.
I just downloaded the Aiport Utility 5.6.1 from Apple site. Unfortunately the OS X version is not compatible with this Airport Utility.
I don't have Time Machine neither.
Below is the message I got:
"Airport Utility cannot be installed on this hard drive. The Mac OS X version on this drive is not supported"
Is there something inbetween: a correction to Airport Utility 6.2 plug in that would accept my base station and compatible with my iMac ?.
Thank you for your attention.

External Drive not recognized anymore????

Just hoping I can find an answer about this from the community since I'm so inexperienced with the technical stuff pertaining to my iMac. For some odd reason, and I suppose it could just be that hard drives don't last forever, not sure, a My Book Essential External 3TB, USB 3.0 drive all of the sudden is not recognized by my iMac nor my MacBook Air. Literally overnight it just stopped being recognized by my apple computers. I had a whole bunch of data on it that I don't know how I'm going to replace it if I can't get an answer to this. The drives light comes on when the iMac system boots up in the morning, but it don't fire up (I think technically it's called initializing). Any help/suggestions would be greatly appreciated.

test with another computer even a windows computer should be able to detect it even if not mount it
because of the filesystem not being native supported
my wd my book ext 1TB usb2/eSATA/firewire died after 1-1/2 years after having problems spinning up a lot so I had to turn it on and off and on and off to get it to start
toke the box apart and put the 1TB hd in another external case and there it worked so suppose WD are better at making hd's then the external enclosure

Qosmio X770 display not recognized anymore

I just bought a Qosmio x770 about a month ago and some day when I started it the login screen never appeared.
In linux left me in command prompt and said that no screen configuration was found.
Windows said nothing but the screen remained black.
After a number of reboots it worked normally but only for a couple of hours.
Plugged to an external monitor it works.
Also when I boot in safemode (or failsafe) it works (I mean I can enter windows/linux at 640x480 resolution).
I updated the bios to the latest version 1.30. What more else to try?
It's really uncomfortable to send it back because I need it for my job (even connected to another monitor).
My hope is that the problem is not hardware related and somehow I can solve it.
Is there a chance?
Thank you!

I reinstalled the windows driver in safe mode ... and nothing.. But I didn't do anything before the problem appeared ... And linux is not recognizing the screen also. I tried to boot from an external hdd and the same problem. Fn F5 show me only the external monitor. I tried some 3d games on the external monitor and everything seem ok. When connected to hdmi linux boots up in X Windows but when running nvidia-settings there is no internal display ... only the external one.
The strange thing is that the internal display is working in safe mode ... is it possible to be damaged then?
Thank you

I have windows 7 64 bit, but i-tunes 10.5 will not install, an error keeps popping up. I could live without the update, but my i-phone is not recognized anymore

I have windows 7 64 bit, but i-tunes 10.5 will not install, an error keeps popping up. I could live without the update, but my i-phone is not recognized anymore

I've got the same problem and can't find a fix...

My new Nanno 7 is not recognized by itunes. Removed, reinstalled and updated itunes. Iphone 5s and ipad 3 sync w/o problems. Itunes diagnostics says it isn't recognized by itunes. I'd really like to get some music on it.

My brand new nano 7 is not recognized by iTunes. I ran diagnostics and it stated under "Device Sync Test" that "no device found". My iPhone 5s and ipad 3 all sync without issue. The online chat with Apple didn't work either. I have uninstalled, reinstalled iTunes and have the latest update. Any suggestions?

Hi, bbarden.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iPhone, iPad, or iPod not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

BlackBerry Desktop Software not syncing anymore after OS 10.7.2 update

And once again,
My two favorite IT toys are not communicating anymore, wasting my time...
My upgraded Mac (10.7.2) doesn't seem to be talking the same language as my BB anymore, since it does not sync...
Help is, of course, welcome

Same for me. I think it's icloud related problem. No one can help us???

Enter key does not work anymore in address bar after FF update

After the update the Enter key does not work anymore. Neither when I type the url directly, nor when I select it from the history.
In short FF has become unusable. Now I need to install and use a less crappy browser. Extremely sloppy, amateuristic update.

see if this is helpful : go to Tool > Options > Advanced > General tab > Browsing and '''Uncheck''': "Use hardware acceleration when available" .

Sony HVR-M25E not recognized anymore in FCP 6.0.3 update

Similar Messages

Maybe you are looking for