Sony MDR 1R Headphones compatability with Lumia 92...

Hi
Would you have used the Sony MDR 1R Headphones "wired type" with Lumia 920, using Sony supplied iPhone cable. If the phones work with headphone connection on the 920. Cheers
Mobiles sure aint what they used to be. They get better

I would not know why not, but I have neither the 920 (use a 620) nor the MDR 1R headset (use SOny earbuds or a set of MDR V700 cans which sound just fine to me
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Similar Messages

  • Sony MDR 1R headphone compatible with iPOD nano 6g?

    Hello.
    I'd like to use a Sony headphone (MDR 1R)
    http://www.sony.fr/product/hps-prestige-headband/mdr-1r/technical-specs#tab
    with my iPOD nano 6th g. The impedance is 48 ohms.
    On the US Sony site, the impedance is 24 ohms
    http://store.sony.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&s toreId=10151&langId=-1&productId=8198552921666484153#specifications
    whereas it's the same headphone.
    Do you think the impedance is compatible with my iPOD?
    Thank you.

    Yes.

  • Is sony mdr zx110 headphone compatible with iphone 3gs

    The above stated is my question please help me:-)...

    it has a 3.5mm minijack connector so they are
    all headsets with a 3.5mm minijack connector are compatabile
    all computers use 3.5mm minijack connectors
    it's a very used std. since the first Sony Walkman in the 1980's the first pair of headset from back then would be compatible too

  • After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other devices.  I haven't moved to ios7 yet.  Any ideas?

    After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other bluetooth devices.  I haven't moved to iOS7 yet.  Any ideas?

    What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
    And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either.

  • Instantaneous hearing loss using a pair of Sony MDR-7506 headphones

    Hello Sony, I am posting here to inform you of a life changing event which occurred June 5th while I was producing music with my Sony MDR-7506 headphones on my mid 2012 MacBook Pro.  Long story short, after years of listening to music at low volume levels and being proactive about the maximum output of my devices, I was accidently exposed to three very short blasts of 115 dB SPL noise (less than a second of time total) from my headphones which has given me permanent low frequency hearing loss in my left ear, persistent tinnitus and hyperacusis.   I'd like to mention that the documentation which came with the headphones states only the following precaution related to hearing loss:  "Avoid listening with your headphones at so loud a volume that extended play might affect your hearing”.  The documentation says nothing regarding the possibility of instantaneous hearing loss, and I believe this is something that should be mentioned in an effort to keep users informed.  I was not using any speciallized hardware amplifier, only these headphones and an Apple laptop.   I personally experienced about 115dB SPL (both calculated and measured), which caused my hearing loss, but these headphones can go up to 136 dB SPL (caclualted).  Normally the headphones will have a maximum dB SPL (calculated) close to around 120 dB SPL (macbook pro for example), and this is generally considered loud, but not permenantly damaging.  The fact I have had this serious damage done at only 115 dB SPL is an indication that not all ears are made the same, and as such, users should be warned of the possibilities.  In a recent interview with Jeffery Holt, an associate professor of otology at Harvard University, he is quoted saying, “The more we learn about it, the more we realize that the safe levels are actually lower than we thought previously”.   Personally, I believe it's time to incorperate a standard by which both amplifier and receiver will communicate to help better regulate the damge that can be done.  Such a technology would ensure the saftey of the users and eliminate accidents such as these while remaining relatively simple.  Such devices exist for specialized hardware, but there is the intrinsic difficulty in matching the impedences of the receiver and the amplifier.  A small RFID chip in the headphone cable could easily relay this information to the amplifier, which would then adjust the power output to ensure hearing loss does not occur.   Although such a technology would be wonderful, it is likely not very profitable, as most consumers don't really care to think about their hearing and may even prefer to keep the volume at unsafe levels.  So, I am currently only hoping to speak with someone at Sony about these issues, specifically about the possibility of having this warning added to the packaging of the headphones. Thank You 

    Hi veita, thank you for bringing your concern to Sony's attention. We apologize for the inconvenience this may have caused you. Kindly PM me your day time phone number and your most convenient time for a call back. Thanks. - Charlie

  • Anybody experienced headphones problem with Lumia ...

    Sometimes when I connect the headphones jack, the audio still came from loudspeaker, not the headphones. To resolved this I have to plug in and out the jack several times. this happen to me 2 times ; first with the standard headphones supplied with lumia 2nd time with my monster headphone.  I wondered if anyone expereince this problem. I haven't visit the nokia care yet because the problem is rarely occured.

    it happened to me 2 times...every time I went to the official support center they just reset it and it works again...but on my home nor sw nor hw reset (soft and hard) will fix this issue...I'm starting to be so worried, because it happened me again few mins ago and they need 15-20 days to fix this I cannot stay without phone so much....any further info?

  • Sony MDR-1RBT headphones have crackling or pops in audio when using bluetooth on my iMac - Mountain Lion

    I notice crackling noise or pops when I listen to music using my Sony MDR-1RBT bluetooth headphones with my 3.4GHz Intel Core i7 iMac running  OSX 10.8.5
    I do not hear the crackling when I listen to the headphones using my MacBook Pro 2.7GHz Intel Core i7 with OSX 10.8.5
    I also do not hear the crackling when using wired connection to the headphones.
    So it would seem that something with the Bluetooth on the iMac is the problem. But I have no idea how to troubleshoot this further.
    Does anyone have any ideas what the cause may be?
    I am pretty sure that it is not interference from another device because I can connect to my MacBook Pro in the same area as my iMac with no crackling

    Hi Michael Erb1,
    Thanks for using Apple Support Communities.  It may also be worth resetting the NVRAM of your iMac to see if that helps with the crackling:
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    - Ari

  • Sony MDR-CD60 headphones...

    Where can I get a pair of replacement pads for these headphones?

    The MDR-CD60 Headphones was first released in the market last 12/1/1996. We no longer have the replacement ear pads available at our Parts and Accessories website  However, you can try checking about this with our Sony Authorized Part distributors below.
    Andrews Electronics Inc.
    661-257-7700
    www.andrewselectronics.com
    Encompass Parts Distribution
    800-638-3328
    www.encompassparts.com
    Fox International
    440-725-7150
    www.fox-international.com
    If my post answers your question, please mark it as "Accept as Solution"

  • Standard headphone compatibility with BB 8330?

    I've not been able to get standard headphones to work with my BB 8330.
    I pulled out my old original headphones that came with the BB, and they work okay.
    Is there a compatibility issue with standard headphones?
    If so, where can I get headphones that will work with the 8330?
    Is there any work-around for this?
    Thanks.
    Solved!
    Go to Solution.

    From this forum thread it appears only certain adapters seem to work for the blackberry, perhaps your provider sells one that will work: http://forums.crackberry.com/f61/using-headphones-blackberry-8830-a-2828/
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Sony MDR 10rnc headphone audio cable

    Can i use a standard audio cable for these headphones?  I lost the cable that hooks up to ipod.  I tried one but would not stay in the headphones.

    Hi bigdog100, 
    Can I have the exact model# of your headphones? MDR 10RNC or MDR 10RNCiP? Thanks. -Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • SFP-  Is Sony HXR-NX5 Camcorder compatable with CS6 Premiere Pro ?

    My footage loses quality after importing into to Adobe. I record in1920x1080 30p HD and I set import in Premiere Pro to AVCHD 1920x1080 30p.
    I had shot a live music video a 25 min song and the flash drive bumped to a new clip after 2.5 gig in the middle of a song. I called sony and they told me to import to Sony's content utility manger then bring it to a file. It worked, the the 25 min footage imported as one clip. When I reviewed the footage from the utility import it was great. Then bringing into Premiere Pro it was grainy and washed out compared to the original footge in the Sony content utility manager. Dissapointed to say the least. Is there a cure. Should'nt it be the same Quality? I view the footage at full resalution in Premiere Pro.

    One - Please do not double post, that is confusing for everyone who is trying to help
    http://forums.adobe.com/thread/1171987
    Two - Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341

  • Replacement ligthning to sony micro usb cable for MDR-1ADAC headphone impossible to find

    Hi there,
    The subject speaks for itself, i lost the original cable that connects my iphone 6 lightning port with my Sony MDR-1ADAC headphone. Sony was so kind to design the cable with a weird switch pin on it so its impossible to use any other ones.
    Even on the spare parts redirects there is nothing to find. To be clear i mean the digital USB type (lightning to weird sony micro usb)
    If someone could tell me where to get this cable?

    Hi Epleptic,
    Please check the links below for further assistance.
    http://esupport.sony.com/US/p/model-accessories.pl
    http://store.sony.com/accessories/cat-27-catid-Sony-Accessories
    Thanks.
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Where can I find replacement pads for Sony MDR If240r

    Need replacement pads for Sony MDR If240r. What pads will work.
    Solved!
    Go to Solution.

    Hello,
    Welcome to the Sony Community.
    The part number for the ear pad is 324636701. Please use the following link to order replacement ear pad for the Sony MDR-IF240R headphones for delivery within the US.
    https://servicesales.sel.sony.com/ecom/accessories/web/shoppingCart.do?operation=addToCart&itemId=13...
    Thank you for your post.

  • Sony mdr v700dj

    Does anyone know where I can get a replacment screw jack adapter for my Sony mdr v700dj  headphones?

    You appear to be located in United Kingdom. Please post your inquiry on Sony UK Community here for further assistance. Thanks! 
    If my post answers your question, please mark it as "Accept as Solution"

  • Can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

    can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

    According to the Sony Web page for those particular eaphones, no. They aren't compatible with iOS 6.  Only iOS 5 and below.
    http://esupport.sony.com/US/p/model-home.pl?mdl=MDR1RBT&template_id=1&region_id= 1&tab=howto#/howtoTab
    Sony wrote:
    Are the headphones compatible with the Apple® iOS®6 operating system?
    Solution
    The headphones are compatible with Apple iOS5 and lower. They are not compatible with the Apple iOS6.
    Region
    Canada
    United States
    Products
    MDR1RBT
    Last Modified Date:12-05-2012ID:C1032819
    You can still try though, but there's no guarantee.

Maybe you are looking for

  • Invoice Retainage in Payables

    Hi All, We are in the process of implementing R12.0.6. We are not using Oracle Services procurement, but still would like to use the Invoice retainage functionality as the business witheld a portion of payment for some Procurement contracts. For exam

  • File XI File scenario - questions

    Hi, does anyone have experience with a scenario that XI will be the integration for backend system -> XI -> ~ 300 work station and comunication is done via files.?  what can be cons & pros? Also can XI zip files before sending it? thanks,         Udi

  • Layer Comp

    I like the idea using Adobe Bridge also as a font management software. Good. I'd also like to have Bridge be able to view Photoshop Layer Comps directly. I love using Layer Comps and would also like to see the feature in Illustrator. But there's no i

  • Mein Iphone 4 16 Gb wir vom ladegereät erkannt aber von meinem Pc nicht woran kann das liegen ?

    Wär nett wenn ihr mir helfen könnet mein pc erkennt mein iphone 4 16 gb einfach nicht beim laden habe ich kein probelm. Weiß nicht mehr wa ich tun soll

  • Can I use I-Phone 4 for internet connection?

    can I use I-Phone 4 for internet connection to I Pad ?