Sony PFM-42V1: I cannot get any audio from monitor

I cannot get any audio from my PFM-42V1. first: I connected independent speakers via speaker sockets - result no sound. Then after reading its Manuel it suggested I connect headphones to the monitor's audio mini jack - again no sound. What I do not understand is it said if sound doesn't work with headphones - contact computer manufacturer. Any suggestions?

From your description it sounds like your using input 1 or input 2, you will need to feed a audio source into the 1/8 mini female jack (Fig. 1) next to input your using. This will allow the audio to pass to the speakers you've connected to the monitors speakers jacks (Fig 2). Also you'll want to make sure that within the Monitor Menu under Custom Setup that you have Speaker Out: On (not off).
Fig 1.
Fig 2.

Similar Messages

  • Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

    I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.)  I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

    Downloaded your operating manual.  It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection).  The picture on page13 seems to be the clearest I could find:
    Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
    I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
    Note, if that truly is a 3.5 mm stereo jack cables are very common.  In your case it would just be a cable with a 3.5 mm jack on each end.
    Update:
    You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?).  The manual is not clear on this (page 31).  Sometimes it just comes down to pushing buttons.

  • I cannot get any audio from my iTunes account on my PC.  Sound works fine with Pandora and everything else.  Any ideas?

    Help

    Just to add, i have also set up the two email addresses and verified them within my icloud account, but still no sync to my iphone or showing on the icloud account...

  • Cannot get any audio on spdif coa

    Im using vista 64 with a regular xfi xtreme gamer. I installed the newest drivers but cannot get any audio to output on the FlexiJack. The digital i/o setting is greyed out on the creative console. Ive tried everything i can and cannot not get any sound. I am using the Z5500. The receiver is across the room and my only choice is to use a long coax cable i have.

    You enabled it in your windows speaker configuration under "playback devices" ?
    You probably have to set it to default by rightclicking on it and activating it and set it to default!?
    http://www.homeys-bunker.de/spdif.jpg

  • I have a bose docking station with a 30 pin connector and purchased the Ipod 5G and also have a Ipad4th Gen and have tried several connectors but cannot get any audio.  Any suggestions?

    I have a Ipod Touch 5G and a Ipad 4th Gen with a Bose sound dock with a 30 pin adapter.  I have tried several connectors but cannot get any audio on the sound dock.  Do you have any suggestions?

    Have you tried this adapter from the Apple on-line store http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c  They also have one that uses a cord to connect the dock to lightning that is $10 more.

  • I cannot get any sound from my imac

    Hi
    I cannot get any sound from my imac either itunes or alert sounds I've checked that everything is turned up and not muted
    thanks in advance

    If a simple reboot doesn't fix it, try resetting the SMU.
    Depending on which iMac you have, one of these links will explain how.
    Resetting the SMU on a G5 iMac:
    http://support.apple.com/kb/HT1767
    and on a Power Mac G5 :
    http://support.apple.com/kb/HT1436
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379

  • Cannot get any sound from william hill radio

    i have logged onto the william hill radio site but cannot get any sound

    sorry to hear about your problems. Try running Audio MIDI, see what's it's set it for both the line out/digital out. Holding down the Alt Key (next to the space bar) gets you a list of all the input and output devices on your macbook pro. Also, see if accessibility is turned on under system preferences.  Other than that, I can't say. if you have wifi problems, see if there's an update for it (airport?) or see if you can change  Wi-ifi channels on your printer
    well, I tried anyways
    JB

  • I have downloaded Fiefox 7 for my laptop running Windows 7. Now i cannot get any sound from web content. ( I can still get sound using Google Chrome !!) Any ideas ?

    I downloaded Firefox 7 and now cannot get any sound when playing web content. I have reinstalled but still no joy. When I use Google Chrome for the same useage, it plays sound fine.
    Any ideas ??

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
      2. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins  
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

  • I cannot get any sound from my ipad. I tried youtube, pandora and. Iseos and none have any sound. I have checked the control panel and the sound is "on". Any suggestions?

    I Am not getting any sound at all from my ipad. I have checked the control panel and it says the sound is "on". Any other suggestions? It has worked just fine in the past.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Help: Satellite M45 laptop w/Win7, cannot get any audio...

    Hello,
    I have downloaded a couple drivers, but i get an error when i try to install. Can someone please link me to a driver?? That is the problem right?
    Thanks

    The problem is that your model is not compatible with Windows 7. I sincerely doubt you'll get everything working properly on your M45 with Win7.
    Toshiba laptop models supported for use with Windows 7
    Mike

  • Cannot get any movement in Monitor window when playing a clip (PE10); preview frame of clip(s) simply shows a white screen. Have gone through standard settings analysis, etc.

    Computer stats:
    OS = Windows 8.1, 64-bit
    RAM = 32 G
    Video card = NVIDIA GeForce GTX 760
    Project Settings:
    File Properties:
    The files were hi-def video clips gathered from YouTube. The stats for these types of files, directly listed on YouTube are:
    So where am I going wrong? I have Steve Grisetti's Muvipix.com Guide to Adobe PE 10, but there is no discussion of this problem.
    BK

    prman13
    For your convenience, the following is a copy/paste of the Announcement at the top of this forum on the Premiere
    Elements 10/NVIDIA GeForce issue.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you
    are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of
    troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.    
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained
    workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce
    video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card
    driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as
    March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any
    corrective action in this regard to date, and none is expected moving forward.    
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675    
    Older NVIDIA GeForce drivers can be found  http://www.nvidia.com/Download/Find.aspx?lang=en-us    
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the
    driver roll back can be found  http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR  

  • 2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
    On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

  • I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

    I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

    Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty.  That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu. 
    Click to view full size
    If there is an item in there drag it out.
    OT

  • I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

  • Not getting any audio...help

    im using the motu 828mk2 with logic express...i setup everything accoding to the book and cannot get any in put..the Coreaudio is set to the motu, and nothing..im getting the metronome ckick when i enable rec...but no audio level? any sugestions

    You need to make sure that in the track pannel, under I/O it is set to the input that your instrument or mic is plugged into.

Maybe you are looking for