Sony Shake 5 not supporting my usb device; HELP

My new Sony Shake 5 (LBTSH2000) does not support my usb device (ipod classic); please help! Dirk.

Is there any error message on the screen when you tried using your iPod classic? Have you tried using just a standard USB device and see if that works?

Similar Messages

My ipod touch 3rd gen doesnt work on usb charger but on dock it says "Charging is not supported with this device" How do I fix it?

I'm taking it in to get it looked at but will they cover this? And is there a way to fix it before I take it in. I'm still under the 1 year warranty plan. My friend said that they might exchange it. It's a 64GB and I use it for a lot of things like my picture, music, contacts, and email. It's got scratches on the back but other wise its ok the screen isn't cracked or scratched.
I have a usb charger for it but when I plug it into the PC or my wall charger it won't charge. It just says "Charging is not supported with this device". It even says that sometimes when it's not charging. But it works on a dock station like my clock or radio.
Also my home buttom won't work unless I press down real hard. This scares me because I'm afraid I wil persss it too hard and break it even more.
Please help.

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT2188 I have an iphone 3GS that keeps getting the message "charging not supported by this device" Dismiss I have tried other usb adapters, car chargers, and directly hooked to the computer and still get the error message. Software is up to date as well.

I have an IPhone 3GS that keeps getting the message "charging not supported by this device" Dismiss. I have tried several different ac adaptors, car chargers and even directly connected to USB on computer and still get the same message. Software is up to date as well. Help!

Clean the dock connector with a soft dry brush.

HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button?

HT1918 Everytime I try to purchase music I get.... Update payment method PayPal is not supported on this device.... Help!!!!

I can't purchase songs any longer using ITunes. The message I receive is Paypal is not supported by this device. Problem with previous payment update acct info. ... I did update acct info! Help?????

I had this same problem also. The problem has to do with your credit card number associated with you iCloud account. To solve this problem, you need to update your credit card/payment information by doing the following on your iPad / iPhone / iTouch:
Settings > iCloud > click on your account > Payment Information
Update this section with your correct credit card information and Save.

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

LabVIEW 2013 13.01f2 64 bit appears not to release USB device

As I attempt to migrate to 64 bit version I have a problem where it appears (for a lack of a better word) LabVIEW does not release the USB device properly when I programatically turn the power off for the USB device I am using (a spectrometer). This software works fine on the 32 bit version. The ONLY way I can get my device to work is by exiting either the EXE or the LabVIEW development system. Upon "wakeup" that is powering up the device, the DLL calls partially work, don't report errors but the device will not function properly. This a bit of a gray area since the company who wrote the DLL does not support the LabVIEW part very well and their example code works, but they don't power cycle the device.
Wish there was some sort of purge or release function. I have looked at the Know issues and I also put in a service request with NI.
If I don't get a fix for this I will have to abandon the sleep mode code.
Any help would be appreciated.
LeMur Technology Services, LLC
President
[email protected]
Toll Free: 877-761-2916
Cell: 609-577-2628
Fax: 215-862-9816

GleMunyan wrote:
As I attempt to migrate to 64 bit version I have a problem where it appears (for a lack of a better word) LabVIEW does not release the USB device properly when I programatically turn the power off for the USB device I am using (a spectrometer). This software works fine on the 32 bit version. The ONLY way I can get my device to work is by exiting either the EXE or the LabVIEW development system. Upon "wakeup" that is powering up the device, the DLL calls partially work, don't report errors but the device will not function properly. This a bit of a gray area since the company who wrote the DLL does not support the LabVIEW part very well and their example code works, but they don't power cycle the device.
Wish there was some sort of purge or release function. I have looked at the Know issues and I also put in a service request with NI.
If I don't get a fix for this I will have to abandon the sleep mode code.
Any help would be appreciated.
Was there a compelling reason to migrate to LV 64-bit? Were you feeling constrained by the 4GB memory limit? That would be one reason I would switch. (The other is if the equipment I was controlling only had 64-bit dlls). LV 64-bit has only limited support compared to LV 32-bit.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Sound has stopped working; failed to play test tone; format not supported by the device (Vista x64 Ultimate)

I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates.
-- The sound is not muted and the volume is set to full.
-- In the device manager, my SigmaTel HD Audio device has no warnings or errors.
-- I can't find any related messages in the Event Viewer.
-- The primary audio device is selected as the default for playback. The mixer shows my media player as being mixed properly to the device.
-- In the sound control panel, under Playback > Speakers/Headphones > Properties > Advanced:
- I get the error message "failed to play test tone" when I try to Test my Default Format (dvd quality)
- I get the error message "format not supported by the device" when I try to change my Default Format
-- Note that unlike others who have similar problems, I'm not joined to a domain
I've tried
* rebooting
* uninstalling and reinstalling the driver for the sound card
* "disable all enhancements" in the sound control panel
(http://social.msdn.microsoft.com/forums/en-US/windowspro-audiodevelopment/thread/b09e43ba-3ffa-4a45-9593-8eee686f124a/)
* looking in the registry for some registry key (not found)
(http://www.consumingexperience.com/2009/04/failed-to-play-test-tone-no-sound-on.html)
Computer details
Dell XPS M1530
Vista Ultimate x64 SP1 with current updates
SigmaTel driver version 6.10.0.5866
**Update**
I followed the following steps:
    * using regedit, go to HKLM\System\CurrentControlSet\Control\WMI\AutoLogger\Audio and change the “Start” value from 0 to 1.
    * Reboot the machine
    * Try to play an audio file.
    * Post a link to the generated log file which you can find in: %WINDIR%\system32\LogFiles\Audio
but don't know where to post the resulting AudioSrv.Evm.001 file. It's also not human readable and I can't find what utility parses it for reading.
**Another update**
Still can't read the EVM. logparser 2.2 can't parse it.
Found this thread which interested me but isn't applicable to x64 (I think):
http://social.msdn.microsoft.com/Forums/en-US/mediafoundationdevelopment/thread/94cdc662-e974-43de-8feb-6eb156924347
**YAU**
Dell confirms it's an OS issue after troubleshooting with me for a couple of hours (wow)
Is there a way to look at this EVM file _without_ installing the Windows Driver Kit??

Hi,
Thanks for posting in Microsoft TechNet Windows Vista Forum.
Upon your description, I see that you have done a lot of research and tests. Unfortunately, none of these troubleshooting works.
Based on my experience, this issue related to "failed to play test tone" can be related to several reasons. It also includes hardware defect. I am confusing why Dell confirms that the issue is related to Operating System. Could you let me know what operation Dell had troubleshot with you?
Meanwhile, here I just provide more troubleshooting except what you performed. If it doesn't work, I may also need to recommend that you contact Dell for support.
1. Microsoft has released a Hotfix to troubleshoot related to "Failed to play test tone".
http://support.microsoft.com/kb/930883
2. Make sure that these services are started.
Windows Audio
Multimedia Class Scheduler
Remote Procedure Call
Windows Audio Endpoint Builder
3. I noticed that this issue occurred not long ago, I may need to suggest that you perform a System Restore to the previous restore point when the computer without any problem.
System Restore
==============
1)     Please click on Start and choose All Programs, Accessories, System Tools, and then Windows Backup.
2)     Click Restore on the left pane.
3)     Choose Basic Restore.
4)     Follow the wizard and click Next.
5)     If you would like to restore everything in the backup, we can check the box “Restore everything in this backup” on the top of the window.
6)     We can also browse and choose certain files and folders to restore. Then, click Next.
7)     Then choose the folder to save the recovered files and click Next.
8)     When we see a “Restore is complete!” message, click Finish.
Meanwhile, as I know, I'm afraid that there is no other way to look at EVM file except Windows Driver Kit. Maybe there are some third-party software that out of my mind can look at EVM files, you may need to perform more research on Internet.
Hope this helps. Thanks.

Writing files is not supported on this device (smart camera 1722)

Hi,
I have a smart camera NI 1722 and I want to save images that I aquire. I use the "IMAQ Write file 2.vi" and I always get this error: "Writing files is not supported on this device".
Is the smartcam really doesn't support to write images in a folder? I've tried to change the path (on the smartcam and on our server) but I always get the same error.
I use LabVIEW Real-Time 8.5.1, LabVIEW 8.5.1, NI Vision 8.5 etc (all the lastest versions of LabVIEW).
Thank you for helping me,
Stephanie

Hello
If you already flattened the image, you can now save it on the hard disk of the smart camera. To load the image, you will have to un-flatten with an image again. See the attached document to see the block diagrams.
I did it for a template in a pattern matching program and worked!!!
Good Luck
Santiago Orellana V.
HighLights - National Instruments Ecuador
Attachments:
Grabacion y recuperacion de imagenes en smart camera.doc ‏28 KB

Nfc is not supported by your device

hi i have a blackberry q5 black whenever i have to try to use nfc it shows nfc is not supported by your device but options are available to use nfc

Go to your Settings > Network and Connections > NFC.
Do you see the NFC setting?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Charging is not supported by this device

help i cant restore my ipod touch. it keeps telling me that charging is not supported by this device even though it is my pc. also i am using the cable that is provided. i have tried to reset my ipod and still nothing. can anyone help?

What is the status of your iPod? Does it work or what?
What computer OS and versio do yur have?
What model iPod and iOS do you have?
Have you successfully connected/synced to the computer before?

I am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported in this device", but phone is charging, before switched to ios7 it was ok.

i am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported on this device", but phone is charging, before switched to ios7 it was ok, i am getting this notification each time i am connect my phone for charging, or laptop, why i am getting this?

I am not using extra cable for charging the phone or sync to pc, one cable which came with the phone.it was a full intact box. Which i use for charging my phone and also i am using that cable for sync to my pc, when i was using ios 6.1.4 at that time that notification didnt shown up in my phone,it was ok, when i switched to ios7, i have started getting this notification, my friends are also using i4, i4s, and i5, they are also updated to ios7, but they are not getting the notification which i am getting in my phone after connecting my phone with the cable, so what is the solution? It will be very helpful for me if you give me any plz...

MBP Does Not Recognize External USB Devices

MBP does not "see" external USB devices (such as Garmin Nuvi GPS) or any thumb drive. No external USB devices show up in Finder nor does Disk Utility see them. No cable issues. Have tried restarting several times, but to no avail. This MBP used to recognize these USB devices, but no longer do so.
I have seen this question posed several times in forum, but no suitable answer. Don't know if it is H/W or S/W problem.

Hi Terry Temple
Is there at least any power going to the USB ports? ( as in if for example you plug in a USB light, will it switch on? )
If there is power in the USB ports it might be a software problem.
Try resetting the SMC see link: http://support.apple.com/kb/HT1411
also try re-set the PRAM see link: http://support.apple.com/kb/HT1379
However if you do not have any power at all it probably is a hardware problem.
Is it still under warranty?
Regards,
Andrew
Message was edited by: iddrew

What does this message mean Charging is not supported with this device?

What does this message mean Charging is not supported with this device?

You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast.

?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah lah go to iTunes story on your computer. You must verify your payment info before you can make purchases. I did all that

?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah blah go to the iTunes Store on your computer. You must verify your payment info before you can make purchases. I did all that, updated payment info and checked paypal it is verified, and it still won't work. Im stumped

If you still have problem, contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html

Sony Shake 5 not supporting my usb device; HELP

Similar Messages

Maybe you are looking for