Sony Vaio Pro 13.3 Touch: Touch screen not working

Hi, The touch screen for my Sony Vaio Pro 13 Touch suddenly stopped working two days ago and I have no idea how to fix it. I didn't install anything new before it stopped working, and I tried to install all the new drivers on the VAIO update but it still didn't work. I thought it might be because of Windows so I updated to Windows 8.1 today and it still does not work. On the PC info it even says" Pen abd touch: No pen or touch input is available for this display". but this laptop is supposed to have touch capability and it has been working up until now. Please help! My model number is SVP13215CDB. Do I need to install or update my driver?

Hi FlyingTortoise,
Was there any changes prior to touch screen not working? Like installing software or hardware? If not, then try using windows system restore to restore back to a date that you know when it was working. If that still does not resolve issue. Then we may have to put the unit back to factory condition to eliminate software related before servicing the unit for hardware.
Nick--

Similar Messages

Arch on Sony Vaio Pro feedback ?

Hi all,
Does anyone have feedback on running Arch Linux on a Sony Vaio Pro ?
Especially:
- compatibility/drivers
- battery life
- fan noize

Hi FlyingTortoise,
Was there any changes prior to touch screen not working? Like installing software or hardware? If not, then try using windows system restore to restore back to a date that you know when it was working. If that still does not resolve issue. Then we may have to put the unit back to factory condition to eliminate software related before servicing the unit for hardware.
Nick--

Sony Vaio Pro 13's Horrible Graphics Performance

I'm using Sony Vaio Pro 13 Model SVP13215PXB and from day one it has this video problem. When you boot it up the videos (over internet or hard drive or games) will play smooth for 5 minutes and then start becoming choppier and choppier as time goes by. For example if you are watching a You tube video it will start normal then in few minutes the frames will start to freeze and hang and worst with time. I've been in touch with support over phone. They did basically install/uninstall of drivers then asked me to reinstall the OS and in spite that nothing has change. In the end they just gave up by saying “please use it for few days and let us know if anything changes”. Hoping against hope in my opinion. Looking close, there is no dedicated graphic memory in this high end laptop and that makes the machine struggle to keep up with today’s modern video demands. Even the cheap laptops come with 128-256 MB of memory. But this one has absolutely none. It’s so horrible that the GTA IV can’t be even played on it which I believe was released in 2008 and this is a 2013 machine. I know that nothing can be done about it and may be that is why Sony stopped making laptops. But the people who invested on the brand will suffer for few more years to come.

Hi asifms,
Sorry if I missed this post. This usually happens when customer is creating multiple threads. I already answered your other post and I will post my answer to this to the other thread, since you already asked the same question. I hope you don't mind.
Firmware update Error code 1
Thanks,
Vincent

TOUCH SCREEN NOT WORKING XPERIA Z ,

Hi all, can anybody help please, the touch screen is not working on daughters Xperia Z. Loads ok & can power off using the volume + key & power button & then turns on but touch screen still not working, It hasn't been dropped & no liquid spilt on it, only 2 months old. Can't download anything support etc from Sony as it asks to enter the password to open the phone which she can't do as the touch screen not working.Is there another way or does it need to go back to the comapny for repair. It is contarct with VirginThanks in advance

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I'm sorry to hear. If the touch does not work, it's not much that you can do on your own more than performing a software repair to exclude software related problems. This can be done via our program Update service:
http://www.sonymobile.com/global-en/tools/update-service/
Download and install SUS, follow the instructions that appear.
Note that the personal data will be lost when performing this repair and if you cannot access the menu, you are unable to back up this data.
If the problem persist, I suggest that you contact your local support team to get information about how you should proceed in this case:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/

IPhone 4 touch screen not working

iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

Good Morning S.GOPINADHAN,
I understand your iPhone screen is black and you are not able to turn it on. The article below will explain what to do when your iPhone is not responsive. I'll also include instructions on how to back up your iPhone when you are able to turn it on.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
iCloud: Back up your iOS device to iCloud
https://support.apple.com/kb/PH12520?locale=en_US
Regards,
- Judy

LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?

Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Lenovo A1 - Touch screen not working after digitizer replacement

After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways.
I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
You can say thank you by pressing the star left to my post IF I HELPED YOU

[SOLVED] ACPI power issues with Sony Vaio Pro 13

tl;dr backstory:
Sony VAIO Pro 13 (SVP13215CDB) laptop was working great (Win 8.1).
Installed Win10 Tech Preview. A week later, it started going to sleep randomly and on certain key-presses (perhaps after performing Sony Vaio Software updates. I'm not 100% sure). I wiped all partitions installing Win7 in legacy mode. It still went to sleep randomly.
I restored to factory default Win8.1 with Sony Vaio software up-to-date. It still went to sleep randomly.
Took it to an electronics repair shop, to see if they could fix it, and they said it can't be fixed in any way without replacing motherboard, but that's basically a new laptop.
So I turned to Arch Linux.
I have completed the basic install from the Wiki, and it no longer sleeps/shuts down randomly, but it will gracefully shutdown when certain events/keypresses occur.
I installed acpid and used "acpi_listen >> acpi.log" to determine what causes the system to perform a graceful shutdown. Here is the result of acpi.log (each line was a shutdown event):
button/power PBTN 00000080 00000000 # Unplugged power adapter.
button/power PBTN 00000080 00000000 # Running on battery and idle. Perhaps battery percent update caused this?
button/power PBTN 00000080 00000000 # Plugged in power adapter.
button/power PBTN 00000080 00000000 # Fn-F1 Touchpad Disable
button/power PBTN 00000080 00000000 # Fn-F5 Brightness Down
button/power PBTN 00000080 00000000 # Fn-F6 Brightness Up
button/power PBTN 00000080 00000000 # Fn-F7 LCD/External Display
button/power PBTN 00000080 00000000 # Fn-1 (Weird. It has no extra function).
As you can see, they all seem to trigger the same shutdown event.
I have seen on other posts that these ACPI signals can be disabled or assigned to other commands, which would be an acceptable workaround if it stops my laptop from erroneously shutting down. Is this doable?
Also, I was not able to reflash the Sony VAIO firmware when using Windows, as Sony's package software is amazing wouldn't allow flashing an equal or lesser firmware version. Perhaps there is a way in Arch to force a reflash if I can get my hands on the firmware blob?
Thanks .
Last edited by SafeToRemoveACPI (2014-11-25 22:55:55)

linux /boot/vmlinuz-linux root=UUID=<UUID here> rw quiet acpi=off
Like this?
I did that, and it disabled my laptop keyboard entirely. In doing so, it disables the key-presses that would normally shutdown the laptop, including the power button. So the only way to shut it down is a hard shutdown via long-press of the power button. Thanks, though.
Update: Issue Solved. I will update post tonight. Flashing the BIOS again resolved the ACPI issues.
Last edited by SafeToRemoveACPI (2014-11-25 22:54:13)

8500 All in One - touch screen not working

One minute the touch screen with all it's functions was working fine and then, bam (!), the touch screen stopped working and I can't even use the one/off switch to power the unit off - it does not respond. Funny thing is that the printer is still working from my computer so I can still send a print job via the wireless. With the touch screen not working I can't use any function from the unit itself (copy a hard copy, fax a hard copy) and if the unit runs out of paper I have to unplug it to reboot since I can't hit the 'enter' on the touch screen once I've reloaded.
Bottom line --- nothing from the unit itself works. Has a printer fairy locked me out or does this sound like a hardware error? Thanks for any help ...
Linda T

Excellent. Let me know how round 2 treats you. The sad demise could have been due to a couple of things...as a side question, is the climate where you live especially dry right now? I may request that our testers recheck how well we handle a static shock on the product if it is dry where you live.
Regards, CF
I work for HP and hope to make your day Sproutastic!

IPods screen went black but assisted touch on screen still works?

IPods screen went black but assisted touch on screen still works? What's would be wrong?? I have dropped it and the lower volume button went partly in side the IPod (thats why i had the assisted touch on) and its been working very slowly fore the last week or so. but other then that it was fine.

With the information given, If the screen is completely black even after the reset, it's sounds as a hardware issue
Could be : The battery
The charger
The phone itself
You can narrow these down one by one preferably.
-If you have an extra battery, test it.
-Try another charging cable or another outlet
If neither of those affect it, you can also wipe the phone, but that's pretty much the last last step you should do since it erases everything. Then restoring it. Time varies.
If you are still having trouble, contacting your carrier, the closest Apple Store, or the technical support line for Apple.

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

9800 Touch screen not working

as mentioned in the subject
am having a problem with my 9800 torch that the screen touch sensitivity is not working at all. i tried formating the apps from it but still nothing happened
also it reboots many times automaticaly and thats makes it difficult to do anything to fix the screen problem
please i need your help to fix this issue
Solved!
Go to Solution.

Try a Battery pull please, with the BlackBerry device powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
What OS are you on? On your device, type in a new message MYVER and a space after to see and report back please.
On device go to Options, Device, Application Management is a great way to see what your apps are doing with your CPU usage on Smartphone. Just slide top bar to CPU and see what is going on. Also touch the CPU menu to see other time variables. I found out that an app was eating away CPU cycles on mine
Disable Compression on media card? go to Options, Device, Storage
using a custom theme? try it for a day the factory default one to rule out your theme
remember the esc key closes most apps, except for GPS and some chat clients. the other apps need to use menu and then exit or close. The farthest key to the right is a home key and does not close any apps per se but will end calls.
If the above does not work then maybe running a new OS is in order.
Manual device OS upgrade instructions:
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
5. This step is not needed unless there is an issue on next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to step 6
6. remove internet connection to PC and reboot PC.
7. Plug in BlackBerry and double click on "Loader.exe." It's located in the same place as the above vendor.xml file was in.
8. if you did Step 5, restore from back up. Follow this KB if needed http://www.blackberry.com/btsc/KB10339
Enjoy the new OS.
if after all of this then maybe you have an issue with your device and will need to contact place of purchase if under warranty still.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Ipod touch 32 GB touch screen not work

32GB ipod touch touch screen not work WHAT TO DO SOME BODY HELP ME MY PHONE NUMBER 09880252978

If your iPod is not dry, dry it before further use. To dry:
How to fix a wet iPod or iPhone | eHow.com
It recommends drying for seven days and changing rice every day.

My touch pad does not work only when using Safari browser. The screen was grey. Help!

My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
Someone please help.
Thanks

I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cache, history and cookies.

HT1212 My iPhones screen is broken(a black screen and the touch function does not work). I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

My iPhones screen is broken(a black screen and the touch function does not work).I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

i don't see a way for you to back up your phone, because it will require you to unlock the phone.

Sony Vaio Pro 13.3 Touch: Touch screen not working

Similar Messages

Maybe you are looking for