Sorting and Grouping in Projects View
In Projects view, when either of two of the three grouping options is selected, there are two sorts in effect: the groups themselves are sorted, and the contents of each group are sorted. These sorts are handled differently, depending on the grouping selected and the sort order selected.
(It appears that there is a bit of the old Apple voodoo in here. The results are arbitrary , but they seem to have been carefully chosen to meet most users expectations. That is to say -- and this is an Apple programming trait -- the arbitrariness is faithful to the expected users' needs, not to logic.)
There are four sorts available, and three groupings
Sorts:
. Name
. Date -- Oldest First
. Date -- Newest First
. Library
Groupings:
. Ungrouped
. Group by year
. Group by folder
So that's twelve possible ways to display Projects in Projects view.
Let's look at a few of them. I'm going to refer to the groups as "Year groups" or "Folder groups" and to the contents of the groups as "Projects". So there is sorting of the groups, and sorting of the contents of the groups (same as "within the group"). These I'll refer to as "Groups sorting" and "Projects sorting".
Sort: Date -- Newest First
Grouping: Group by Year
Result: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
Sort: Date -- Oldest First
Grouping: Group by Year
Results are as expected; a reversal of the "Newest First" sort, but with the same groups: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
Sort: Name
Grouping: Group by Year
Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are sorted alphabetically, descending.
Sort: Library
Grouping: Group by year
Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector. (Note that this last is literal: a Project named "Aardvark Close-ups" if it's in a Folder named "Zoography" will be listed after all the projects in "Yellow Paintings" and all the Projects in "X-rays, thoracic" if those Projects are in alphabetical order by Folder name in the Library. You can see all the Projects in your Library listed on the Library tab of the Inspector by "{Option}+clicking" the disclosure triangle next to "PROJECTS & ALBUMS" twice.)
Sort: Date - Newest First
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, newest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder.
Sort: Date - Oldest First
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, oldest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
Sort: Name
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted alphabetically by name, descending. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
Sort: Library
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector (see note above). Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are listed in the order they appear in the Library).
Ernie [asked:|http://discussions.apple.com/thread.jspa?threadID=2816124&tstart=0]
+I see those icons but note that those projects in folders will be in different sections arranged alpha, and then date within. Am I correct on that?+
The answer is, it depends.
If "Group by year" is selected, the Groups-sorting will always be by date, regardless of the sort order specified. The Groups-sorting order will follow whatever is specified for the Projects sort order (or default to "oldest first").
If "Group by folder" is selected, the Groups-sorting will always be alphabetical, descending, regardless of the sort order specified. (So if you use Projects view, take care in naming your Folders. Use prefixes if needed to force a desired alpha sort.)
If "Ungrouped" is selected, there are no Groups and perforce no Groups-sorting.
That's all I have to say on this topic (today).
Message was edited by: Kirby Krieger
In Projects view, when either of two of the three grouping options is selected, there are two sorts in effect: the groups themselves are sorted, and the contents of each group are sorted. These sorts are handled differently, depending on the grouping selected and the sort order selected.
(It appears that there is a bit of the old Apple voodoo in here. The results are arbitrary , but they seem to have been carefully chosen to meet most users expectations. That is to say -- and this is an Apple programming trait -- the arbitrariness is faithful to the expected users' needs, not to logic.)
There are four sorts available, and three groupings
Sorts:
. Name
. Date -- Oldest First
. Date -- Newest First
. Library
Groupings:
. Ungrouped
. Group by year
. Group by folder
So that's twelve possible ways to display Projects in Projects view.
Let's look at a few of them. I'm going to refer to the groups as "Year groups" or "Folder groups" and to the contents of the groups as "Projects". So there is sorting of the groups, and sorting of the contents of the groups (same as "within the group"). These I'll refer to as "Groups sorting" and "Projects sorting".
Sort: Date -- Newest First
Grouping: Group by Year
Result: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
Sort: Date -- Oldest First
Grouping: Group by Year
Results are as expected; a reversal of the "Newest First" sort, but with the same groups: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
Sort: Name
Grouping: Group by Year
Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are sorted alphabetically, descending.
Sort: Library
Grouping: Group by year
Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector. (Note that this last is literal: a Project named "Aardvark Close-ups" if it's in a Folder named "Zoography" will be listed after all the projects in "Yellow Paintings" and all the Projects in "X-rays, thoracic" if those Projects are in alphabetical order by Folder name in the Library. You can see all the Projects in your Library listed on the Library tab of the Inspector by "{Option}+clicking" the disclosure triangle next to "PROJECTS & ALBUMS" twice.)
Sort: Date - Newest First
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, newest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder.
Sort: Date - Oldest First
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, oldest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
Sort: Name
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted alphabetically by name, descending. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
Sort: Library
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector (see note above). Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are listed in the order they appear in the Library).
Ernie [asked:|http://discussions.apple.com/thread.jspa?threadID=2816124&tstart=0]
+I see those icons but note that those projects in folders will be in different sections arranged alpha, and then date within. Am I correct on that?+
The answer is, it depends.
If "Group by year" is selected, the Groups-sorting will always be by date, regardless of the sort order specified. The Groups-sorting order will follow whatever is specified for the Projects sort order (or default to "oldest first").
If "Group by folder" is selected, the Groups-sorting will always be alphabetical, descending, regardless of the sort order specified. (So if you use Projects view, take care in naming your Folders. Use prefixes if needed to force a desired alpha sort.)
If "Ungrouped" is selected, there are no Groups and perforce no Groups-sorting.
That's all I have to say on this topic (today).
Message was edited by: Kirby Krieger
Similar Messages
-
Sorting and Grouping -Two months in this query
Hi All,
many thanks for jeneesh
i am doing project for construction company, i face this problem in grouping points according to relation between these points the
Relation is from 1 to 100. If the point between this rang that mean there is relation between these points.
this question already solve but the results not correct when the table has more data.
SQL - sorting and grouping.
from jeneesh and many thanks for him.
This example for more clarifications
for example i have these points
id location percentage comments
1 loc 1,2 20% that mean point 1 and 2 close to each other by 20%
2 loc 1,3 40% that mean point 1 and 3 close to each other byy 40%
3 Loc 8,6 25% that mean point 8 and 6 close to each other by 25%
4 Loc 6,10 20%
5 LOC 11,10 10 %
6 LOC 15,14 0%Also , we can see the relation between these points as follwoing
- points 1,2,3 in one group why becuase 1,2 has relation and 1,3 has relation that mean 1,3 also has hidden relation.
- Points 6,8,10,11 in second group there are relations between them .
- but no relation between 1 or 2 or 3 with any point of 6,8,9,10,11
- as well as no relation between 15, 14 that mean 14 in third group and 15 in fourth group.
whati need?
to group the points that has relation according to percentage value ascending
The most important part is to group the points. SO , the below query the gropuing is not correct.
I have the follwoing table with data
drop table temp_value;
create table temp_value(id number(10),location varchar2(20), percentage number(9));
insert into temp_value values (1,'LOC 1,2',10);
insert into temp_value values (2,'LOC 1,3',0);
insert into temp_value values (3,'LOC 1,4',0);
insert into temp_value values (4,'LOC 1,5',0);
insert into temp_value values (5,'LOC 1,6',0);
insert into temp_value values (6,'LOC 2,3',0);
insert into temp_value values(7,'LOC 2,4',0);
insert into temp_value values (8,'LOC 2,5',30);
insert into temp_value values (9,'LOC 2,6',0);
insert into temp_value values (10,'LOC 3,4',0);
insert into temp_value values (11,'LOC 3,5',0);
insert into temp_value values (12,'LOC 4,5',40);
insert into temp_value values (13,'LOC 4,6',0);
insert into temp_value values (14,'LOC 6,7',40);
insert into temp_value values (15,'LOC 7,2',0);
insert into temp_value values (16,'LOC 8,2',60);
insert into temp_value values (17,'LOC 8,3',0);
insert into temp_value values (18,'LOC 3,1',0);
insert into temp_value values (19,'LOC 9,6',30);
insert into temp_value values (20,'LOC 11,2',0);
insert into temp_value values (22,'LOC 12,3',10);
insert into temp_value values (23,'LOC 19,3',0);
insert into temp_value values (24,'LOC 17,3',0);
insert into temp_value values (24,'LOC 20,3',0);when i used this query , the results is not correct
with t as
(select percentage,loc1,loc2,sum(case when percentage = 0 then 1
when loc1 in (l1,l2) then 0
when loc2 in (l1,l2) then 0
when l1 is null and l2 is null then 0
else 1
end) over(order by rn) sm
from ( select id,location,percentage,
regexp_substr(location,'\d+',1,1) LOC1,
regexp_substr(location,'\d+',1,2) LOC2,
lag(regexp_substr(location,'\d+',1,1))
over(order by percentage desc) l1,
lag(regexp_substr(location,'\d+',1,2))
over(order by percentage desc) l2,
row_number() over(order by percentage desc) rn
from temp_value
order by percentage desc
select loc,min(sm)+1 grp
from(
select loc,rownum rn,sm
from(
select percentage,decode(rn,1,loc1,loc2) loc,sm
from t a,
(select 1 rn from dual union all
select 2 from dual ) b
order by percentage desc,decode(rn,1,loc1,loc2) asc
group by loc
order by min(sm),min(rn);the results
SQL> /
LOC GRP
2 1
8 1
6 2
7 2
4 3
5 3
9 4
1 5
12 6
3 6
11 13
LOC GRP
19 14
17 15
20 22
14 rows selected.SQL>
but the correct is
Location group No
2 1
8 1
4 1
5 1
1 1
6 2
7 2
9 2
12 3
3 3
19 4
17 5
20 6many thanks in advance.
Edited by: Ayham on Nov 30, 2012 3:07 AMThanks,
i want the sorting for each group DESC not all groups to gather
when i used your query i get
SQL> with connects as (
2 select distinct
3 loc1
4 ,loc2
5 ,dense_rank() over (order by connect_by_root(loc1)) grp
6 from temp_value
7 start with
8 percentage != 0
9 connect by nocycle
10 (prior loc2 = loc1
11 or
12 prior loc1 = loc2
13 or
14 prior loc1 = loc1
15 or
16 prior loc2 = loc2)
17 and
18 percentage != 0
19 )
20 , got_grp AS
21 (
22 select
23 loc
24 ,dense_rank() over (order by grp) grp
25 from (
26 select
27 loc
28 ,max(grp) keep (dense_rank first order by grp) grp
29 from (
30 select
31 loc1 loc
32 ,grp
33 from connects
34 union
35 select
36 loc2
37 ,grp
38 from connects
39 )
40 group by
41 loc
42 )
43 )
44 SELECT loc
45 , grp
46 FROM got_grp
47 ORDER BY COUNT (*) OVER (PARTITION BY grp) DESC
48 , grp
49 , loc
50 ;The output is
LOC GRP
1 1
2 1
4 1
5 1
8 1
6 3
7 3
9 3
12 2
3 2
10 rows selected.but i want it like this
Loc Grp
2 1
8 1
4 1
5 1
1 1
12 2
3 2
6 3
7 3
9 3So , the sorting for each group Separate based on the percentage column.
many thanks
Edited by: Ayham on Nov 30, 2012 9:43 AM -
Using member sorting and grouping with two reports sharing rows
Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT MATERIAL AMOUNT
TOTAL PROD_A-X 100
PROD_A_A MAT1 22
PROD_A_B MAT1 50
PROD_A_A MAT2 28
TOTAL PROD_B-X 120
PROD_B_A MAT1 30
PROD_B_A MAT2 50
PROD_B_B MAT2 40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very muchHi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT MATERIAL AMOUNT
TOTAL PROD_A-X 100
PROD_A_A MAT1 22
PROD_A_B MAT1 50
PROD_A_A MAT2 28
TOTAL PROD_B-X 120
PROD_B_A MAT1 30
PROD_B_A MAT2 50
PROD_B_B MAT2 40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much -
Sorting and Grouping by multi-value Choice columns - any options?
I found out the hard way that SharePoint doesn't support sorting or grouping lists by Choice columns that are set to "Allow Multiple Values." I'm stunned by this missing capability, and my project has come to a complete halt without it. It's like Microsoft only implemented hafl the feature -- you can put data in, but then you can't do anything with it. You can't even use the column in a formula in another column, so you can't parse it.
I'm not posting just to gripe though. Does anyone have any suggestions for alternatives? What do you do when you need to let people make multiple selections, and then you want to sort or group by those values? Are there any add-on products that allow this? At this point my only option seems to be to not allow multiple choices, but that's taking away a rather significant feature.
Thanks for any ideas,
SteveHi Paul,
Thank you for the reply and the additional questions. For my situation I want to use the multi-value choice to indicate a "belongs to" relationship, as in "this item belongs to projectA, projectB, and project C. Because there are more than 10 projects, I didn't want to create a separate Yes/No checkbox for each one.
For viewing the information, I'm looking primarily for a "group by" function. So if an item belongs to projectA, projectB, and projectC, it would appear three times, once under the grouping for each project. What I don't want is for a row that only belongs to projectA to be grouped separately from a row that belongs to both projectA and projectB. I want to see all the rows that belong to projectA grouped together, regardless of whether they also belong to other projects.
I'll look into using a grid control, but if you have any other suggestions I'll certainly listen.
Steve -
Swatches CS3 - Sorting and grouping possible?
Hello,
a simple question. Is it possible to sort or group swatches?
If the answer is yes, how do I do it?
Thanks,
MattYou can select and drag them up and down the panel.
k -
TableModel with SORT and GROUP BY functions solution.
Hello all,
I'd like to represent an EnvelopeTableModel. This class is developed to incapsulate another TableModel and allow user to reorder and group data without changing original values and orders.
It allows to perform multi column sortings and grouping and
supports following group functions: EMPTY, COUNT, MIN, MAX, SUM, AVG.
Here you can download the library, demo version and documentation.
http://zaval.org/products/swing/
It would be great to know all your opinions.
With best regards
Stanislav LapitskyAbout 1) and 3).
These suggestions are almost the same. These features will change GUI component but i want to improve TableModel instead of JTable.
Using the model user can use JTable for data representation.
Of course I can improve JTable component and add multiline row/column headers with ability to reorder/group data from component and a lot of another widgets but it isn't my goal.
About 2) What do you mean "crosstab"?
Thanks for your 2-cents :-).
With best regards
Stas -
Sorting and grouping issue in WDP-ALV table
lr_field->if_salv_wd_sort~create_sort_rule(
EXPORTING
sort_order = if_salv_wd_c_sort=>sort_order_ascending
group_aggregation = abap_true ).
And while binding data, I'm sorting the internal table having data as below
SORT wd_assist->gt_details_table(itab) BY bproc bsubproc function field ASCENDING.And output is as follows
In the above snapshot, The sorting is getting disturbed on colunm: Function......
But required output should be as below
Pls help me how to achieve this?
Thanks
KatriceHi Sandesh,
When we use the SALV_WD_TABLE component to display ALV, by default, all columns are arranged in the same order as the attributes in the context node of your
application.
You need to add the following code in the wddomodifyview( ) method of your View.
METHOD wddomodifyview
data:lt_columns type salv_wd_t_column_ref,
ls_column type salv_wd_s_column_ref,
lo_column type ref to cl_salv_wd_column ,
lo_ref_cmp_usage type ref to if_wd_component_usage,
lo_ref_interfacecontroller type ref to iwci_salv_wd_table ,
lo_value type ref to cl_salv_wd_config_table.
* Get reference to the Component usage of the ALV.
lo_ref_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lo_ref_cmp_usage->has_active_component( ) IS INITIAL.
lo_ref_cmp_usage->create_component( ).
ENDIF.
* Get reference to the Interface controller of the ALV.
lo_ref_interfacecontroller= wd_this->wd_cpifc_alv( ).
lo_value = lo_ref_interfacecontroller->get_model( ).
* Get the Columns of the ALV
CALL METHOD lo_value->if_salv_wd_column_settings~get_columns
RECEIVING
value = lt_columns.
* Get reference to each column and set the column position
LOOP AT lt_columns INTO ls_column.
lo_column = ls_column-r_column.
CASE ls_column-id.
WHEN 'VBELN'.
lo_column->set_position('1').
WHEN 'MATKL'.
lo_column->set_position('2').
WHEN 'POSNR'.
lo_column->set_position('3').
WHEN 'MATNR'.
lo_column->set_position('4').
ENDCASE.
ENDLOOP.
ENDMETHOD.
Hope this helps you to resolve your issue.
Thanks
KH -
Hello,
Anyone know if there is a way to do something like this?
Original XML:
<item>
<word>word1</word><num>10</num><num2>9</num2>
</item>
<item>
<word>word2</word><num>5</num><num2>3</num2>
</item>
<item>
<word>word1</word><num>7</num><num2>6</num2>
</item>
I want to do something like group on <word> and sort accending on sum(<num>), min(<num2>) and end up with this:
<item>
<word>word1</word><num>17</num><num2>6</num2>
</item>
<item>
<word>word2</word><num>5</num><num2>3</num2>
</item>
Is this possible?
thanks,
chad.Here's a start. See Chapter 9 of my book for a complete explanation of how to exploit XSLT keys like database functional indexes to make grouping operations like this be fast in XSLT. It takes a bit to wrap your mind around why and how it works and the book has figures that help illustrate this.
<!-- chad.xml -->
<list>
<item>
<word>word1</word><num>10</num><num2>9</num2>
</item>
<item>
<word>word2</word><num>5</num><num2>3</num2>
</item>
<item>
<word>word1</word><num>7</num><num2>6</num2>
</item>
</list>
<!-- chad.xsl -->
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:key name="g" match="item" use="word"/>
<xsl:output indent="yes"/>
<xsl:template match="/">
<list>
<xsl:for-each select="list/item[generate-id(.)=generate-id(key('g',word)[1])]">
<xsl:sort data-type="number" select="sum(key('g',word)/num)"/>
<xsl:variable name="items-with-same-word" select="key('g',word)"/>
<item>
<word><xsl:value-of select="word"/></word>
<num><xsl:value-of select="sum($items-with-same-word/num)"/></num>
<num2><xsl:value-of select="sum($items-with-same-word/num2)"/></num2>
</item>
</xsl:for-each>
</list>
</xsl:template>
</xsl:stylesheet>This produces the output:
<list>
<item>
<word>word2</word>
<num>5</num>
<num2>3</num2>
</item>
<item>
<word>word1</word>
<num>17</num>
<num2>15</num2>
</item>
</list> -
Hello Friends,
I have made an ALV report where I am sorting on the second column which is a field called 'SUPPLIER_ID'.
I am to group the supplier_id, so that only the first row shows the supplier id, and those rows with the same id should not be shown. But am having trouble with this.
check Supplier ID field2 field3
xxxxx xxx xxx
xxx xxx
xxx xxx
xxxxxx xxx xxx.
These are the steps I do in the code.
1. I build the fieldcatalogue
2. then I select the data
3 . set the sort order
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = 'SUPPLIER_ID'.
x_sort-tabname = 'GT_OUTTAB'.
x_sort-up = 'X'
x_sort-spos = 2.
APPEND x_sort TO t_sort.
4. Then I call the Reuse function.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = ls_layout
IT_FIELDCAT = t_fieldcat
i_callback_pf_status_set = l_status
i_callback_program = l_repid
it_sort = x_sort
TABLES
T_OUTTAB = gt_outtab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
But all the rows show the supplier ID, what am I doing wrong?
best regards B
Edited by: Baljinder Singh Gosal on Sep 29, 2008 2:36 PMtypes: begin of gs_outtab.
types:
SUPPLIER TYPE ZSAM_LAC-SUPPLIER,
SUPPLIER_ID TYPE ZSAM_LAC-SUPPLIER_ID,
SPEND TYPE ZSAM_LAC-SPEND,
lights type char1,
color type i,
tabcol type lvc_t_scol,
id type char25,
name type icon-name,
symbol type icon-id,
end of gs_outtab.
data: gt_outtab type standard table of gs_outtab,
wa_outtab type gs_outtab.
data: gr_container type ref to cl_gui_custom_container,
gs_layout type lvc_s_layo,
gt_fieldcat type lvc_t_fcat.
perform display.
form display.
data: ls_layout type slis_layout_alv,
t_fieldcat TYPE slis_t_fieldcat_alv,
x_sort TYPE slis_sortinfo_alv
t_sort TYPE slis_t_sortinfo_alv,
l_status TYPE slis_formname,
l_repid TYPE syrepid.
REFRESH t_sort.
REFRESH t_fieldcat.
g_pf_status = 'SALV_STANDARD'.
l_status = 'SET_PF_STATUS'.
l_repid = sy-repid.
Layout
ls_layout-lights_tabname = '1'.
ls_layout-lights_fieldname = 'LIGHTS'.
ls_layout-coltab_fieldname = 'TABCOL'.
ls_layout-zebra = 'X'.
PERFORM set_fieldcat2 USING:
*pos fieldname ref_field ref_tab len noout text_m text_l txt_s reptxt ddic hotsp icon chckbx edit dosum inttype symbol tech group fieldcat
1 'CHECK' 'XFELD' space space space 'Select' 'Select' 'Sel' 'Select' space space space 'X' 'X' space space space space space t_fieldcat,
2 'SUPPLIER' 'SUPPLIER' 'ZSAM_LAC' space space text-hl5 text-hl5 text-hl5 space space space space space space space space space space space t_fieldcat,
3 'SUPPLIER_ID' 'SUPPLIER_ID' 'ZSAM_LAC' space space text-hl4 text-hl4 text-hl4 space space space space space space space space space space 'A' t_fieldcat,
perform get_data
perform set_icons.
perform set_order USING 'ORKLA_COMP_NAME' 'GT_OUTTAB' 'X' space space t_sort.
CLEAR x_sort.
x_sort-fieldname = 'SUPPLIER_ID'.
x_sort-tabname = 'GT_OUTTAB'.
x_sort-up = 'X'.
x_sort-spos = 1.
APPEND x_sort TO t_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = ls_layout
IT_FIELDCAT = t_fieldcat
IT_EXCEPT_QINFO = gt_exc
i_callback_pf_status_set = l_status
i_callback_program = l_repid
it_sort = t_sort
TABLES
T_OUTTAB = gt_outtab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " display_fullscreen -
Audiobook sorting and grouping
How do I group the audiobooks on a iPod nono G5. The same audiobook works perfectly on my iPhone, but when i add them to my iPod the books don't group and all the tracks are sorted by track names, so all the books are mixed in one long list.
This is a very annoying bug which Apple do not seem to be addressing. If you look at the previous thread "Major Audio book problem ipod 5th gen" then you will find some workaround.
Hope it helps -
Hello
I would like to raise a question I am not able to answer
I want to group invoice at the end of the month with all delivery notes created within the month
The question is that some lines are text lines and there is no DN attached to the the line
as a result on the invoice the first group is DN without number grouping all empty lines
then I can see the grouping of delivery notes number
My question is how to delete on the lay-out the text lines so the document is clean and not showing a group of empty lines at the start of the document
thank youHi,
1. Create a field with variable 157, let's say it's field F_001
2. Create a formula field: F_002: F_001!='T'
3. Link all the row level fields on the repetitive area to this formula field. They will be displayed only if the row type is not text.
Regards,
Nat -
Is it possible to have sorting by group and checkboxes in the same ALV
Hi there,
Does anyone know whether it is possible to have sorting and group on one field in ALV and checkboxes set on another field in ALV?
eg.
Fieldname
===========
Name----
Text
Allowance----
Numeric -> Sort & Group
Verified----
Checkbox
How do I code it if it is possible to have grouping and check box all in one ALV. Meaning I want some data that are the same to merge using sort, while still having the checkbox available for my other field (Verified).
Thanks in advance.
Lawrencehi,
GROUP BY clause is used on database tables with select statement.
sort is used on internal tables.
can u clearly explain y u need group by and sort on the same field.
if u are extracting from dbtable using grou by clause on a field, then no need to sort it again.
if u want sort u can do it by giveing "sort itab by field". thats not a problem.
now coming to check box.instead of using SLIS type field catalog, u use LVC type.
in LVC_S_LAYO, u can fine box_fname.
while defining layout, u declare a variable of type LVC_S_LAYO
AND GIVE BOX_FNAME = internal table field name -
2.1 sort order on 'all projects'
I really like the 'all projects' view, it looks like iPhoto 'events' view, which was sorted, as it should be, in alphabetical order. I love Aperture, however I've been waiting for an alphabetical sort to the 'all projects' view so that I can get rid of (or rather stop using) iPhoto. They seem to have added sort with what seems to only have two options, by date, which is horrible if, like me you have downloaded pictures or old digital photos that contain wonky incorrect information from the wild west days of digital photography.
Any ideas on how to get things to display in 'all projects' like they do in iPhoto 'events'??
BTW, my projects are all titled in the way they should display. events that I want by date are titled as such, other pictures are grouped in projects such as 'Shorty' (my dog).Sorry Grom, no, there is no UI for the kind of sort you are seeking.
-
Use of project view to group project records in multi-project report
I have a summary level multi-project report to report summary level information for active projects. We are using project view to organize our projects between departments and divisions (hierarchical structure) - represented by folders in project view. Projects are occasionally moved between project folders. If anyone has experience with report development using folder structure? My intent is to create grouping band based on folder structure and list projects under appropriate folder/band.
Any assistance is greatly appreciated.
I am using CM14.1 with OBIP 10.1.1.7
Thanks,
PrathIf you are creating a standard multi-project report (no retrieval criteria; project_state=0) and you run this report from within PCM, PCM automatically appends to your syntax the filtering criteria for the "folder" the user has highlighted in the project tree. In this case you would have one report that would retrieve multiple sets of data actively depending upon the project tree position. I have seen sometimes this causing issues with certain base syntax, but in general this should work.
Sounds, though, like you're building your report to call to the raw project_view tables, and Rick pointed out you need to use both of these tables then most likely. -
Hey Guys,
I'm a web developer (front end and back end, kind of a one man army sort of deal) and my current employer wishes to use crystal reports to display the results of the online survey apps/tools I have been working on for the last few months. However, I have been having trouble getting the reports to render in browser, and a lot of the ui components of the browser based report viewer (the interactive parameters and group tree) will not render properly in the design view of visual studio (ive attached a screen cap of what I'm talking about) or in the browser itself.
I am new to crystal reports and its community and if I am leaving out any critical details or have posted in the incorrect section please inform me and I will make changes as necessary.
Additional info:
Visual studio version: 2013 professional (trial)
Plugin version (exe file name): CRforVS_13_0_9.exe (I also installed the 64 bit run-time from this)
Server and OS versions: IIS 7.5 on Microsoft Windows Server 2008 R2
Any help you guys could provide would be greatly appreciated.
Cheers,
-MikeHi Mike
First thing you want to do is uninstall CRVS SP 9 and install CRVS SP 10. SP 10 is the first SP to support VS 2013.
Once that is done, let us know if that helped any.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Maybe you are looking for
-
How to deploy a Webapplication on WAS more than one times on same server?
Hi all, I 've a special problem: In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o
-
Is there a general failure with RoboHelp 7? WYS is NOT WYG ??
Greetings, Love to show you screen shots of a Herculean struggle within the RH interface to get a simple all text numbered list to align (especially when one line item runs on for a few lines) and then what shows up in the published doc. Just no comp
-
Dear Gurus, how can i calculate tax on a free good item and post it to a different GL account withotu having it show up on the output tax line of the sales invoice? this free good tax needs to be calculated and absorbed by the company, not passed on
-
JavaBeans VS Enterprise JavaBeans
Hi everyone, I hope someone can clarify this little problem for me. I am a starting developer with the J2EE technology. I am impressed what it is capable of and I want to continu my study in it. I have been using JavaBeans for a while now and I have
-
Different colors Golden Hour VS Sunrise – Why?
The overall color, especially in shadow areas in images taken at sunrise seem cooler/more blue than those taken in the evening, why is that so? Thank you!