Sorting in 6i and 10g reports
Hello All,
I am running 6i and 10g reports against a 10g database.
I ran one of the 6i report and it generated a report in one sorting ordear
and when i ran the same report on 10g ,it generated the report in ddifferent order.
Both the reports r run against the same 10g database.
The order by clause on the columns of the records r identical.
Now i wanted to understand how it is sorting in different orders in both 6i and 10g reports?
Thanks,
Ranz
Hi,
Please note the fact that 6i Reports is not certified to work with 10g Database. Hence it becomes impossible to address the sorting behavior of 6i Reports, though there is nothing different in the way it works. I would suggest you to use 10gR2 version of Reports services with 10g Database which is certified and supported. Thanks for your understanding.
Regards,
Anand
Similar Messages
-
Can this be done?
have installed XE, and have been using HTML DB. I am wanting more control with my reports, and I am much better with 10g reports developer than the built in html db reports.
I found this site, but I am stuck on "deploying the report" (#9/#10)
http://www.oracle.com/technology/products/database/htmldb/howtos/howto_integrate_oracle_reports.html
I coppied the rdf to $ORACLE_HOME/reports/samples/demo
then I ran "Start OC4J Instance"
But when I try to call the report in either firefox or IE like it tells me to, I can't get it to work. Page Cannot Be Found. (I replaced USER and PW too)
http://menzoberranzan:8080/reports/rwservlet?module=Invoice.rdf&userid=USER/PW@xe&destype=cache&desformat=pdf
Any suggestions as to how to do this without installing more on my computer, such as Oracle Application Server?
ThanksNo ideas about running an Oracle Report on an Express Edition DB so I can call it from a HTML DB application?
-
Can 10g OAS run 10g Report server and 6i reports together?
Re-posted from the OAS thread: Can 10g OAS run 10g Report server and 6i reports together?
We have need to run 6i and 10g reports from the same physical server running OAS 10g.
Are there issues / conflicts?
There are hundreds of 6i reports called from many applications. Converting completely is a separate project on the books.
The need is to utilize 10g graphs on this urgent project. The graphing in 6i has not gotten along here with RAC and other distributed architecture. Additionally, I believe the 6i graph runtime would have to be installed on each client workstation... again, hundreds.
Thank you.Hello,
You can install OAS 10g and Reports 6i on the same server as long as they are installed in different ORACLE_HOME ..
Take car to the value of the variable PATH ..
Regards -
Hi
I am trying to get a tillslip to print correctly after converting from reports 6i to 10g. The problem i think is that the outputfile generated in the 6i version is diffrent from the output file in 10g. The 10g version looks similar to postscript while the 6i output file does not mean anything to me.
If i open the 6i test.dflt file it looks something like: =c0c1c32R
If i open the 10g test.dflt file it looks something like:
%!PS-Adobe-3.0 %
%Creator: Oracle Toolkit 2 for Motif 10.1.2.0.2 PRODUCTION
Using the 6i output file i can print the tillslip correctly in both the 6i and 10g environments. Using the 10g output file all the char in the output file prints including the comments (the %!PS-Adobe-3.0 % bit also)
Any ideas how to get the output file the same. All report settings (DESFOTMAT, DESTYPE, ...) are the same. The dflt.prt file only differs as follows:
printer "dflt"
height 66
width 80
after page control(L)
return "" (this line in 6i file is: return "M" )
linefeed control(J)
Any ideas will be helpfull. I have tried creating the report as a .rtf, .pdf and .ps file and all of them print with the code inside and not just the tillslip info.
ThanksHi
I afound that the problem is that the app server does not know about the printer as it is connected to a users PC. Thus when using the dflt desformat it selects the default printer language of the App Server printer. This is the reason why the files are diffrent.
If I understand everything the process should be:
1 - Run the report from forms (on app server).
2 - Write the report to a file on App Server and then transfer the file to the user PC.
3 - Send file correct printer on the user PC.
The problem still remains on how to create the correct file which can be send to the printer connected to the users PC as the driver of the correct printer is not known too the App Server. The printer still prints the file incorrectly as the file is not created using its drive as what the case was when running it in 6i.
Setting the MODE to character (which will enable you to provide a .prt file if you had one to give) will not work as the report contains an image.
Regards
Edited by: hfp843 on Sep 17, 2008 2:28 AM -
Report: sorting of data and temporary table sorting
We have a report that runs a procedure, which inserts data into a temporary table using the supplied parameters. The report then selects data from this table.
Previously the report has always displayed data in the same order in which it was inserted into the table, even though no sorting is specified by the report itself. I realize that the report itself ought to specify the sorting in order to guarantee it, but this has worked in the past.
As part of an application/Oracle upgrade the report has been recompiled. Data is now displayed in a different order as before. However, each time we run it now, it IS the same (new) sorting. So it's still consistent, but consistent in a different way than before.
Is there some way to go back to the old sorting (display in same order as inserted into table) - without having to re-code this (and all the other) reports in order to specify the sorting? We think that data is still inserted into the temporary table in the same order as before. We are using the same version of Crystal Reports.
Edited by: user489847 on May 31, 2010 4:01 AMCrystal Reports.This is the Oracle Reports forum.
Anyway, I have seen this in one of our applications too. Suddenly the ordering was different, because there was no explicit order by. There is never a guarantee of the ordering if you do not specify it.
You should ask this in the database forum too, since this is not really Reports related. -
Reports Requirements using R12 and Oracle 10g Reports
Hi All,
Looking forward to some valuable inputs to propose a technical solution in R12 using 10g Reports Developer.
Requirements are :
1. Report output should be in Excel Format. ( Is this possible without XML Publisher using 10g Reports only )
2. Report Parameters to have multi selection criteria. ( Is this possible in 10g Reports and Oracle Apps, Report Manager responsibility ?)
Regards,
Anand>
1. Report output should be in Excel Format. ( Is this possible without XML Publisher using 10g Reports only )
>
Yes, Reports can create output in Excel - but XML Publisher offers better and easier options.
>
2. Report Parameters to have multi selection criteria. ...
>
Pl explain what you mean by multi selection criteria.
HTH
Srini -
Install and configure report service on Oracle Application Server 10g
i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanksthe case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ??? -
I recently upgraded from Oracle Forms/Reports 10g to 11g. Oracle 10g Reports when saved as a PDF is easily converted to a word document, however ,Oracle 11g does not convert as 10g does. What is the difference and how to make the 11g report saved in a PDF be able to convert to a Microsoft Word document cleanly.
Thank you,
StevenHello,
There is a "known issue" with the PDF in 11g:
ALERT: Reports PDF Problems in 11.1.2.1.0 Patchset for Non-Linux Platforms (Doc ID 1522543.1)
May be the problem comes from this "issue" ...
"Patch Set Exception" exist for this issue.
Kind regards -
Sorting a varchar2 field in Report 10g
Dear all,
i have a table of salaries, which have a field RANK_NO VARACHAR2.
I create a report and order it by RANK_NO. but it is not ordering what i want to be. it is ordered like
1
10
11
2
3
4
5
6
7
8
9
then i use the order by cluase like this,
ORDER BY TO_NUMBER(REGEXP_SUBSTR(RANK_NO,'[0-9]+')),
REGEXP_SUBSTR(UPPER(RANK_NO),'[A-Z]+').
but the result is same .
how to sort a varchar2 field in reports?
Thanks & RegardsHi Muhammad,
Use the following Order By clause hope it helps you,
ORDER BY TO_NUMBER (REPLACE (RANK_NO, LTRIM (RANK_NO, '0123456789'))), RANK_NO
Best Regards
Arif Khadas -
How to install database 10g and forms&reports developer 10g?
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideGul wrote:
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideThis link will help you http://tahiti.oracle.com/ -
Roles and Privileges for 10g AWR and ASH reports
Are there specific roles and privileges are required for one to run AWR and ASH reports for users who don't have DBA roles? If so, I would like to know about them.
I think sysdba privilege need to run AWR report.
Also check, how privilege is granted to PERFSTAT user in $ORACLE_HOME/rdbms/admin/spcuser.sql, you might get some clue!!!
Cheer,
Virag -
10g Reports issue with XML Data Source
Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
<!-- trade instructions detail & trailer -->
<xs:element name="TradeDetail">
<xs:complexType>
<xs:sequence>
<xs:element ref="TradeType"/>
<xs:element ref="TradeID"/>
<xs:element ref="TradeDate"/>
<xs:element ref="FundID"/>
<xs:element ref="FundName"/>
<xs:element ref="DollarValue" minOccurs="0"/>
<xs:element ref="UnitValue" minOccurs="0"/>
<xs:element ref="PercentageValue" minOccurs="0"/>
<xs:element ref="OriginalTradeID" minOccurs="0"/>
<xs:element ref="CancellationFlag"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Instruction">
<xs:complexType>
<xs:sequence minOccurs="0">
<xs:element ref="TradeDetail" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- overall trade instruction message -->
<xs:element name="InterchangeHeader">
<xs:complexType>
<xs:sequence>
<xs:element ref="Instruction"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<!-- definition of simple elements -->
<xs:element name="FundID" type="xs:string"/>
<xs:element name="TradeType" type="xs:string"/>
<xs:element name="TradeID" type="xs:string"/>
<xs:element name="TradeDate" type="xs:string"/>
<xs:element name="FundName" type="xs:string"/>
<xs:element name="DollarValue" type="xs:decimal"/>
<xs:element name="UnitValue" type="xs:decimal"/>
<xs:element name="PercentageValue" type="xs:decimal"/>
<xs:element name="OriginalTradeID" type="xs:string"/>
<xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
<Instruction>
<TradeDetail>
<TradeType>Purchase</TradeType>
<TradeID>M000038290</TradeID>
<TradeDate>20061201</TradeDate>
<FundID>ARO0011AU</FundID>
<FundName>ABN Fund</FundName>
<DollarValue>2111.53</DollarValue>
<CancellationFlag>N</CancellationFlag>
</TradeDetail>
<TradeDetail>
<TradeType>Redemption</TradeType>
<TradeID>M000038292</TradeID>
<TradeDate>20061201</TradeDate>
<FundID>ARO0011AU</FundID>
<FundName>AMRO Equity Fund</FundName>
<UnitValue>104881.270200</UnitValue>
<CancellationFlag>N</CancellationFlag>
</TradeDetail>
<TradeDetail>
<TradeType>ISPurchase</TradeType>
<TradeID>M000038312</TradeID>
<TradeDate>20061201</TradeDate>
<FundID>MLC0011AU</FundID>
<FundName>Cash Fund</FundName>
<OriginalTradeID>M000038311</OriginalTradeID>
<CancellationFlag>N</CancellationFlag>
</TradeDetail>
</Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
<InterchangeHeader>
<xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
<xsl:sort select="FundName"/>
<xsl:sort select="TradeDate"/>
<TradeDetail>
<TradeType><xsl:value-of select="TradeType"/></TradeType>
<TradeID><xsl:value-of select="TradeID"/></TradeID>
<TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
<FundID><xsl:value-of select="FundID"/></FundID>
<FundName><xsl:value-of select="FundName"/></FundName>
<DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
<UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
<PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
<OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
<CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
</TradeDetail>
</xsl:for-each>
</InterchangeHeader>
</xsl:template>
</xsl:stylesheet> -
Fonts issue on 10g Reports (Linux)
A while back I posted some questions about installing fonts on Linux RHEL 5.
Currently, I'm in process of upgrading Client/Server Forms/Reports from 6i on a Windows platforms to 10g forms/reports on a Linux RHEL5 platform. No database is installed on the server since we are using the TNSNames in the Network Admin to connect to the database.
I have been able to convert all forms and all reports to 10g. I had an issue with the Arial, Arial Narrow, and Courier New fonts not displaying in output when I generated a PDF file via the screen using the WEB.SHOW_DOCUMENT command. The fonts were translating. I was able to use Metalink Note 261879.1 and run the scripts to generate the AFM files and copy the TTF fonts to the appropriate directories. When I run the reports in 10g on Linux, those 3 fonts display just fine.
However, I have 3 other fonts (Monotype Sorts, Arial Unicode MS, and one of Barcode fonts) that I need to get working. I've worked with Oracle Support and I'll be honest, the steps they are telling me either aren't very clear or just flat out aren't right.
I've tried on Windows to use the ttf2pt1 program to generate the AFM files and copied those up to guicommon/tk/admin/AFM directory. I've copied the TTF file up to the associated directory. I've modified the uifont.ali directory to include the font, to no success.
Has anyone tried to move a Windows font up to Linux (Unix) and got it to work successfully? If so, could you provide me some steps? I've really been trying to get this to work and would do anything at this point to get it to work. I've got about 5 reports that use these 3 fonts and if I get them working, I'm done.
Please provide good detail, if possible. Oracle Support has just confused me more by providing notes to read and little tidbits here and there but haven't given me something that works in a straightforward manner.
ChrisMy uifont.ali:
# Corrected uifont.ali - Matt Jernigan, Brown University, 31 MAR 2010
# Corrected [ Global ] aliasing standard Windows fonts.
# Corrected [ PDF:Subset ] Arial Unicode MS and less standard fonts.
# Note: These corrections do not necessarily match Oracle docs.
# 05 APR 2010 - Decided to subset Arial, Arial Narrow, Courier New,
# and Times New Roman in addition to Arial Unicode MS due to lack of
# support of UTF-8 in Oracle's PDF engine at this time. A charset
# conversion feature for specific fonts would be nice but nothing was
# found that was working such as arial.....=helvetica.....WE8ISO8859P1
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2004, Oracle. All rights reserved.
# $
# $Revision: tk2/admin/uifont.ali#0 $
# Copyright (c) 1994, 2004, Oracle. All rights reserved.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#MJJ# - Unix apparently lowercases what it reads from the Report
# and this case must be corrected.
# Arial = Helvetica will not work. Likely due to Oracle not supporting
# Regular as a weight such as Arial...Regular = Helvetica...Medium
#arial = Arial
#"arial narrow" = "Arial Narrow"
#"courier new" = "Courier New"
#"times new roman" = "Times New Roman"
"ms sans serif" = "MS Sans Serif"
"microsoft sans serif" = "Microsoft Sans Serif"
# Note: I'm not providing AFM files for the Sans Serifs. I'll let
# the engine do with them as it sees fit. Best to avoid use of them.
# Arial Narrow is not really standard enough to be included here
# so limit use to clients that are known to have it installed.
# Consider moving Arial Narrow TTF's to the server and subsetting it.
#MJJ# - Alternative mappings to the above. The PDF engine appears to
# take liberty with mapping Courier New to Courier and Times New Roman
# to Times and, if wanted, these mappings appeared to correct this
# behavior. Note: not thoroughly tested. Changing the AFM files
# from CourierNewPS to CourierNew and such may produce more compatible
# results on Mac (just a guess) -- though leaving at Courier would be
# most compatible.
#arial..Italic.Bold.. = "Arial-BoldItalicMT"..Italic.Bold..
#arial...Bold.. = "Arial-BoldMT"...Bold..
#arial..Italic... = "Arial-ItalicMT"..Italic...
#arial = "ArialMT"
#"courier new"..Italic.Bold.. = "CourierNewPS-BoldItalicMT"..Italic.Bold..
#"courier new"...Bold.. = "CourierNewPS-BoldMT"...Bold..
#"courier new"..Italic... = "CourierNewPS-ItalicMT"..Italic...
#"courier new" = "CourierNewPSMT"
#"times new roman"..Italic.Bold.. = "TimesNewRomanPS-BoldItalicMT"..Italic.Bold..
#"times new roman"...Bold.. = "TimesNewRomanPS-BoldMT"...Bold..
#"times new roman"..Italic... = "TimesNewRomanPS-ItalicMT"..Italic...
#"times new roman" = "TimesNewRomanPSMT"
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
#===============================================================
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Subsetting entry. Entries
# in Font Subsetting will take precedence over the entries in Font Embedding
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
# Subsetting TrueType Collection fonts:
# Typically, a TTC font contains several fonts in one file. For example,
# the TTC file, msgothic.ttc consists of three fonts in the order -
# MS Gothic, MS PGothic and MS UI Gothic. To subset MS PGothic, the
# entry in the PDF:Subset section of uifont.ali would be:
# "MS PGothic" = "msgothic.ttc,1"
#MJJ# - Removed old subset mappings.
"arial unicode ms"..... = "ARIALUNI.TTF"
arial..Italic.Bold.. = "arialbi.ttf"
arial...Bold.. = "arialbd.ttf"
arial..Italic... = "ariali.ttf"
arial = "arial.ttf"
"arial narrow"..Italic.Bold.. = "arialnbi.ttf"
"arial narrow"...Bold.. = "arialnb.ttf"
"arial narrow"..Italic... = "arialni.ttf"
"arial narrow" = "arialn.ttf"
"courier new"..Italic.Bold.. = "courbi.ttf"
"courier new"...Bold.. = "courbd.ttf"
"courier new"..Italic... = "couri.ttf"
"courier new" = "cour.ttf"
"times new roman"..Italic.Bold.. = "timesbi.ttf"
"times new roman"...Bold.. = "timesbd.ttf"
"times new roman"..Italic... = "timesi.ttf"
"times new roman" = "times.ttf"
tahoma...Bold.. = "tahomabd.ttf"
tahoma..... = "tahoma.ttf"
# Tahoma is a narrower adaption of Verdana more appropriate for print.
# Tahoma also has more charsets such as Arabic, Hebrew and Thai.
# No italics. Verdana and Tahoma were designed for screen anyhow.
#MJJ# Miscellaneous Notes:
# oracle::devlpar4:/u01/app/oracle/Forms1/fonts
# ARIALUNI.TTF arialbd.ttf courbd.ttf tahomabd.ttf verdana.ttf
# arial.ttf cour.ttf tahoma.ttf times.ttf
# PFA's might be found here: /usr/lib/X11/fonts/type1
My screenprinter.ppd:
*% Corrected screenprinter.ppd - Matt Jernigan, Brown U, 31 MAR 2010
*% Reverted baseline from hp4mp6_1.ppd back to datap462.ppd (Oracle's
*% default). Added Arial, Arial Narrow, Arial Unicode MS, Courier New,
*% Tahoma, and Times New Roman.
*% 05 APR 2010 - ArialUnicodeMS wants to be before the other Arials
*% for some unknown reason, else it is not found for subsetting.
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
*OpenUI *Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1
*CloseGroup: InstallableOptions
*UIConstraints: *Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*%DefaultFont: Error
*DefaultFont: Courier
*Font ArialUnicodeMS: Special "(Version 1.01)" Special ROM
*Font ArialMT: Special "(Version 3.06)" Special ROM
*Font Arial-BoldMT: Special "(Version 3.06)" Special ROM
*Font Arial-BoldItalicMT: Special "(Version 3.06)" Special ROM
*Font Arial-ItalicMT: Special "(Version 3.06)" Special ROM
*Font ArialNarrow: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-Bold: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-BoldItalic: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-Italic: Special "(Version 2.40)" Special ROM
*Font CourierNewPSMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-BoldMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-BoldItalicMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-ItalicMT: Special "(Version 2.90)" Special ROM
*Font TimesNewRomanPSMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-BoldMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-BoldItalicMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-ItalicMT: Special "(Version 3.06)" Special ROM
*Font Tahoma: Special "(Version 3.15)" Special ROM
*Font Tahoma-Bold: Special "(Version 3.15)" Special ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665 -
Need help in sorting a column in classic report
Hi I am trying to create and classic report and I need to do sorting on the columns. Also I am using a select list to filter the records in the column. When I am not using the select list the sorting is working but when I am using the selcet list and select the sort option then it is showing error. Can anyone help...
Thnaks,
RikSelect lists prior to v4 will sort on the return value. In v4, it sorts on the display value (as you're probably expecting). There's nothing really for you to fix here except if it's really important, see if you can get upgraded to v4.
-
From 6i to 10g "How to run a 10g report from OEM scheduler"
We recently converted all of our 6i form and reports to 10g. We had forms and reports running as batch processes.
Now that we are using 10g it is understood that we cannot run the forms as we did in 6i using OEM scheduler, so they were converted to scripts.
Our problem still remains, How do we run 10g reports as batch processes?
Can we use OEM scheduler?
Is there a better product to accomplish this task?
...Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard
Maybe you are looking for
-
Adobe Flash Player for iphone 4s
Is there another program (app) that I can use in place of Adobe Flash Player? I would like to watch college softball which requires Adobe Flash Player.
-
Tab characters in a string indicator box
I have a string indicator box and would like to make text on different lines match up. When I try using the tab character or a \t I only get a single space. Is there a trick to making the text line up?
-
How can you add comments to a text file while using a Digital Waveform vi?
Hi. I'm very new to Labview. I have a txt file of 1's and 0's wired to a "read from text file" which is then wired to a "spreadsheet string to digital.vi" ("digital waveform") and lastly to a graph. I want to add notes to the txt file that will not b
-
The title sums it up. I miss the old tangible versions of PS. Am I supposed to log-in somewhere every time I need to use PS? Endless redirect pages on-Adobe site to nowhere. How does this all work? I just want to edit a freaking photo!
-
How do I download a Window's (PC) formatted IPOD to my new MAC??
I just got a mac and now I can't listen or download my music to my ITUNES because I originally formatted my ipod to my pc. Is there anything I can do?