Sound blaster audigy 2 zs...NO SOUND! he

i've got a sound blaster audigy 2 zs...had it for two years...this morning, all of the sudden, it doesn't work...no sound...at all...i've tried uninstalling/reinstalling, speakers are fine (i've had to use the built in audio from my motherboard...NOT the greatest!)...anyone have any ideas, hints, ect. please...help me?:angry:

My Mobo=D875PBZ
perryjp20, After about 25 hours of troubleshooting, finally got my system up 'n running again, including the Soundcard. After a lot of wrong guesses for a "quick fix," simulated re-building the PC from the ground up:
Flashed back to an earlier BIOS (P27, mid-2004). Took out the ATI and Audigy soundcard, disconnected all dri'ves. Booted & shutdown. Added ATI card and monitor, then one 300 gig HD and DVD dri've, then formatted HD via installation of XP Pro, installed original Intel chipset drivers, and XP Pro SR and and set-up 2d partion on HD, installed ATI drivers (originals out of the box), then added Audigy card and its drivers (originals out of the box), then plugged in formatted 2d HD (250 gig). In the process now of adding the rest of my software and games. Shutdown and re-booted at each phase and monitored temps and voltage through BIOS at each phase to attempt to detect any problem with power supply or overheating -- saw no problems.
Will update ATI drivers soon, but reluctant to re-install Win XP Pro SR2.
Don't know what caused the failure of first the soundcard then the system "lost" the ATI card, then HD was corrupted. I was using the Firewire port of the Audigy card (connected to Canopus ADVC) when the sound started cracking/cutting-in-and-out and then went out altogether and the entire system went belly-up. Perhaps that Firewire port is bad? Other leading suspects: BIOS (which I had updated a couple of months ago) or perhaps the system had a worm or virus that Trend Micro did not pick up.

Similar Messages

DO NOT install this driver for Sound Blaster Audigy SE, or Sound Blaster Audigy Va

I have two creative products that work fine under xp. But since installing vista my sBli've platinum doesn't work at all, i find out that creative are no longer supporting this card for vista. Fair enough... So I'm waiting for the SB audigy driver update and behold I read that i shouln't install the driver for my other Sound Blaster card, Audigy SE.
what are creative trying to do? does'nt look like a well run company.
And from what I've read what is the point of getting a card that is suppoted by the new driver as other people seem to be complaining that this new driver doesn't enable all the features as under Xp.

If I am right your Audigy is the first Audigy (EMU0k2) soundcard that was launched by Creative Labs. You need the drivers for the audigy series. For driver/application updates: Latest downloads Audigy Platinum
For a proper install, you may use the tools Driver Cleaner or Driver Sweeper in Windows Safe Mode to clean up the older drivers that are left in the system which can cause the problems you are having now; you can find these tools at Guru3D (under 'General Utilities').
After that You can install the drivers including the software/applications by using the install cd which is supplied with your Audigy soundcard, and then install the driver updates manually afterwards.
Or you can try out the new Daniel_K's driverpack (software/applications included, install cd not needed): SB Audigy Support Pack 2.8.000EQ (08/22/2008)
Good luck!
Message Edited by CTman on 09-23-2008 05:38 PM

Sound Blaster Audigy 2: No sound in DVD or Windows Media Pla

Getting around in Windows XP I get all the sounds in the book, whether it's starting up or shutting down, critical "bongs", icon confirmation "clicking", all the sounds are there. Where I do not get sound is While attempting to watch a DVD or when I try to play any music file in Windows Media Player. The DVD video will play, there's just no sound, and with Media Player I get this error message:? "Windows Media Player cannot play the file because there is a problem with your sound device."? Again, all the other Windows sounds are there. Anybody have any experience with this one?

I have just installed my Sound Blaster card, and get all of the Windows sounds. I can even play music CDs and movie DVDs on different media players other than Windows Media Player. The sound is also fine when playing games. However, when I try to use Windows Media Player, the CD and DVD plays, but there is no sound. In fact, when Windows Media Player is up and running, there is no Windows sounds or even other sounds when playing games. As soon as I close Windows Media Player, there is sound. I analyzed the configuration settings for both the Sound Blaster card and Windows Media Player, but I cannot see any problems.
Does anyone have a clue?

Sound Blaster Audigy 4 Pro & Sound Blaster ZS Video Edi

Im from New York city, and im looking every were to find Audigy 4 Pro & Audigy ZS Video Editor and i cant seem to find it any were any one from new york knows which shop has it and is selling it, and my friend from Ireland, was emailing me about the ZS Video Editor and he wants me to get him one would it work if i sent him that over to Ireland can some one help me! its driving me crazy i cant find those two.

you aren't the only one....
recently did an upgrade to my system and wanted to get a little more heavily into video editing/capture, did the homework and comparisons and settled on the audigy ZS video editor as i was very impressed with everything i saw on creatives canadian site, so i told my puter guy to get me a price and availibility on one
GUESS WHAT, he contacted creative directly and they told him that they had not yet released it and had no idea when they would..didn. teven have a ballpark price!!!
makes you wonder why they post it on their site, list all the features except price and where you can get one!
when they don't even know if or when it will be released in north america...
unfortunately for them, i bought from their competitors...
sorry, i don't mean to be so negati've, just didn't want to see someone spend a lot of time looking for something that may not be there

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Wiring of Sound Blaster Audigy 2

Hi all, just got my new Sound Blaster Audigy 2 ZS sound card from newegg.com, which came with no software or manual of any kind. A day before I went ahead and took out my old Sound Blaster Audigy , which was having problems; now the wiring is the same but I just need to know where what goes as I do not remember. for most part the wires that plug into the one labeled "SB 394", looks like it should be one single plug but it's a collection of 6 small labeled wires. Anyone who can tell me in what order these wires plug into the "SB394" slots? They are labeled, VG, VP, TBA + TBA- and so on.

nevermind

Sound Blaster Audigy 2 ZS Probl

Alright, so here's the scoop on my problem. I have a pre-built computer, an e-machines T4892 that I have been upgrading on my own. I added a Radeon 9800 PRO graphics card and that works just fine. Today for a late birthday present I got the Sound Blaster Audigy 2 ZS Sound Card I asked for. Before installing it I had the integrated audio of Realtek AC'97 Audio. I believe I removed those drivers but I'm not quite certain, I want to Add/Remove Programs and removed Realtek AC'97 Audio and it's now gone. Yet when I go into C:\Drivers\Audio the Realtek Icons are still there plus the Installation icon. So when I started up my computer after I put the card in, I bought this card from www.newegg.com by the way, the things in the bottom right hand corner that tell you you have new hardware popped up and all of that, it asked me to install from a specific location such as the installation cd or an advanced location, I clicked specific location because I put in the CD. It said it could not find it. So I just shrugged and went double clicked on the icon for the D: dri've and the autorun started. I installed the drivers and the Music player I forget the name. Everything was good, so I restarted my computer. When I log into my account (this is a shared computer) everything starts up fine except about 5 seconds later I look at my taskbar and Audigy.exe pops up and all of a sudden my computer restarts. I continued to log into my account and this kept on happening. So when I logged in for the last time I quickly did CTRL+ALT+DEL and went to processes, endeded audigy.exe and I was able to keep my computer on, this is currently how I am running. So I decided the audio driver was probably out of date so I went and downloaded the new drivers and restarted my computer. When I logged into my account, there's usually a windows sound that plays, that did not play, and 5 seconds later the computer restarted again. Plus when it restarted in the bottom right hand corner a little box would come up saying a Multimedia Audio Controller has been detected and it would come up and say Install the Software automatically (Recommended) and Install from a list or specific location (Advanced), before it would restart. So now I'm stuck with the problem of my computer restarting if I don't quickly end audigy.exe and I have no sound. If you could help me that would be great.

I've been fiddling around in the Device Manager and it has Other Devices and under it is Multimedia Audio Controller, I can choose to either reinstall the driver udate the driver, disable it, or uninstall it. Here's what comes up on properties
This device is not configured correctly. (Code )
To reinstall the drivers for this device, click Reinstall Driver.
Help would be appreciated here. I'm a big gamer and would like to have this up and running before our first CAL Match.

Creative Sound Blaster Audigy 2 ZS With WinTV Expr

Hi,
I am using a Creative Sound Blaster Audigy 2 ZS sound card, and I recently purchased a Hauppauge WinTV Express card, I have installed the card with no problems, but it says I have to connect a wire from the Line Out port on the WinTV card into the line In port on my sound card. I cannot find a line in port onm the back of my sound card so I am getting so sound from WinTV. Can anyone please tell me how to set it up correctly?
Thanks for your help,
MJJOS.

The Line In jack is the second jack from the Digital Out jack. If you have problem locating those jack, you can checkup the user guide too.
Jason

I have some Audigy card Sound Blaster Audigy SB1394 EAX ADVANCED HD maybe can

I have some Audigy card Sound Blaster Audigy SB394 EAX ADVANCED HD maybe can i get some info about this card.. it is 5./6. some details about it. i found it in my closed :P
it will be great if someone help me about this card. because i have my SB li've Value if this audigy better i'l just change it.

i think it is an Creative Labs SoundBlaster Audigy with 394 PCI Sound Card
32-Bit Professional Quality Effects Engine
? Creative's Audigy? patented effects processor
? Support for real-time digital effects like reverb, chorus, normalizer, pitch shifter, or distortion across any audio source
? Capable of processing, mixing and positioning audio streams using up to 3 available hardware channels
? Full 32-bit digital mixer maintains all sound mixing in the digital domain, eliminating noise from the signal
High Definition Audio Quality
? Playback of 64 audio channels, each with its own independent sample rate
? 24-bit Analog-to-Digital and Digital-to-Analog conversion
? 6-bit recording with sampling rates of 8, .025, 6, 22.05, 24, 32, 44. and 48kHz
? Supports Sony/Philips Digital Interface (SPDIF) input and output of up to 24-bit/96kHz quality
? SPDIF output up to 24-bit resolution at selectable sampling rate of 44., 48 or 96kHz
? Low latency multi-track recording with ASIO? support
EAX?ADVANCED HD?, Advanced Audio and 3D Audio Technology
? Optimized user-selectable settings for headphones, two, four or six speakers and external A/V amplifiers
? Dolby? Digital audio decoding to 5. speaker channels in both analog and digital modes
? Upgradeable 3D audio architecture for future improvements
? Hardware acceleration of EAX ADVANCED HD for games
? Creative Multi Speaker Surround? (CMSS) technology places any mono or stereo source in a 360? audio space
? User-selectable EAX ADVANCED HD music presets, pre-configurable DSP modes simulating various acoustic environments
? Time-scaling
? Audio Clean-Up
SB394 Connectivity
? High speed connection to IEEE? 394-enabled devices with up to 400Mbps transfer rate
? Interconnection of up to 63 devices for peer-to-peer communication
? SB394 Certification Program thoroughly tests and certifies participating vendors' 394-enabled devices with Sound Blaster Audigy for optimal performance and ease of use
? Hot-plug support for ease of connecting or disconnecting external devices
Realistic Wave-Table Synthesis
? Creative's Audigy music synthesis engine
? 64-voice hardware polyphony with Creative's patented 8-point interpolation technology that reduces distortion to inaudible levels
? Uses SoundFont? technology for user-definable wave-table sample sets
? Unlimited sample size can be loaded into host memory for professional music reproduction (limited to available system memory size)
? Scalable PCI wave-table synthesis architecture with multi-timbre capability
? 48 MIDI channels with 28 GM & GS compatible instruments and 0 drum kits
MIDI Interface/Joystick Port
? Support for analog and digital or DirectInput? game devices
? Support for two simultaneous MIDI devices with Sound Blaster Audigy Dri've
On-Board Connectors
? Analog / Digital Out (Analog Center & Subwoofer / 6-channel SPDIF Output)
? Line in
? Microphone in
? Line level out (Front) / Headphone out
? Line level out (Rear)
? SB394 port
? Telephone Answering Device in
? Analog CD Audio in
? Digital CD Audio in
? Expansion header to an external 5-pin Joystick / MIDI port
? Internal SB394 header to Sound Blaster Audigy Dri've
? Expansion header to the Sound Blaster Audigy Dri've
Sound Blaster Audigy Audio Performance
? Signal-to-Noise Ratio (A-Weighted) = 00dB
? Crosstalk (Left/Right and vice versa) = -00dB
? Total Harmonic Distortion + Noise at kHz (A-Weighted) = 0.004 %
? Frequency Response at -3 dBr = <0 Hz to 22 kHz

Sound blaster audigy platinum ex constant static sound, PLEASE HE

hey, i just got my sound blaster audigy platinum ex sound card today and the second i installed it and plugged in my speakers i got this static noise that would come out at all times, when i would play music you could hear the music softly, but still the static dominates. I disables my onboard sound and tried reinstalling in a different pci slot but still same problem. This is my first time buying a creative card and it has not been a pleasant experience so far. Can anyone please help me?
My pc is
windows XP pro
amd 3000+ 64
Asus K8V SE deluxe socket 754 via k8t00 ATXASUS

siruis,
go to the mixer settings and one of the sliders. the one
beside the wave slider to the right and slide it down to about 40% and try it, while playing if static still present
slide it down more while the track is playing, i had the same prob wwith li've 24bit 7. and this cured it for me.
hope this helps you.
john ( good luck )

Sound Blaster Audigy Platinum

Hi there I just had a quick simple question. I am interested in buy one of the Sound Blast Audigy Platinum eX sound cards with the external portion as well. I am wondering if the external can double as a receiver so I can just hook up a set of speakers to the PCI card for my TV and my Personal Computer. Is this possible, even if I do need to purchase extra adapters? I have an RCA cable I can run from the L/R of my TV to the External Card, but can the External card provide an output to the speakers? Basically all I am asking is if the TV sound can go out of the PC speakers...lol Sorry if I made it sound more complicated than it really is.
Sincerely,
Matt

Hi Specter,
Don't worry, it's better to ask questions and get the answers you need, than to be confused or unsure
The first question is a bit subjecti've, some people may notice the difference, but the quality/SNR on those cards is very high so it shouldn't make much of a difference really. It will sound better aswell as you'll be hearing the full effects, in the proper speakers, instead of just stereo.
As far as the second query goes, I can't really recommend any particular application to you personally, but others can add their input there. The full versions of the various applications should all pretty much have the same options, at least the ones I've tested generally allow you to change the audio option which is what you'll need if you want to connect digitally (most DVD applications now have a built-in decoder, but if you want the audio to be sent over the digital connection you need to turn off the decoding option, so it outputs the signal untouched, to your receiver). Trial versions don't have as many options though, so on some you might not be able to adjust the option you need, but that shouldn't be a problem on full versions.
Hope that helps,
Cat

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Sound Blaster Audigy 2 ZS Platinum Pro Ad_link Cable

Hi,? I have the Sound Blaster Audigy 2 ZS Platinum Pro and my Ad_Link cable has been damaged. I have contacted every on line auction house and everyone in and out of the United States and no one has this cable available. What I am looking for now is one of 2 things;? the specs of this cable (which is not listed in any of the documentation that came with the product, nor is it on the web-site, nor does Customer Support seem to have this information), or a comparable cable that will work in it's place.
Thanks for any help that anyone can offer.
A very frustrated,
Jody

Hi Joko,
Please check your private message.

Sound Blaster Audigy with 5.1 Speakers prob

I have 5. speakers with a sound blaster audigy sound card. I've installed all the drivers and additional programs but it looks like my 2 rear speakers are not working. I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't. In the surround mixer i tested the 5. and here are the results:
- Front Left (Sound: OK, Speaker: OK)
- Center (Sound: NO SOUND)
- Front Right (Sound: OK, Speaker: OK)
- Rear Left (Sound: OK, Speaker: NO - The sound comes from the center speaker)
- Rear Right (Sound NO - It sounds very strange... bearly you can understand the words, Speaker: NO - The sound comes from the center speaker)
The wired are set correctly i checked it and I dont know what it might be wrong. Drivers are ok and everything are installed. Help please.

"I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't."
Does this not indicate two of the speakers are not physically working? Or have a mis-interpreted?

Sound blaster audigy 2 zs...NO SOUND! he

Similar Messages

Maybe you are looking for