Sound Cutting Out on Standard Def Channels with or wthout DVR

Hi!
We are having occasional sound drop-out problems. They seem to only be happening on standard def channels although we have a hi-def box.  (We often record sitcoms and kids shows in standard def to save room on the DVR.)
The problem is that the sound cuts out for a fraction of a second (just long enough to notice) at random spots.  If we rewind and play it back, it still drops out in the same spot so it seems the issue is with the signal getting to the box from the outside line, not an hdmi cable issue as I've seen mentioned elsewhere.
The issue occurs whether we're watching a previously recorded show or a "live" one (understanding that even the live shows are delayed a few seconds to enable the DVR to record it).
I've seen other sound issues related to switching channels but this is not the case here.
I've also had it happen on a small TV with no box. We just have the coax going right into the display to watch standard def  network shows on it.  This leads me to think it's a signal issue, not a DVR one.
Anyone else have this and/or have any luck in getting it resolved?
Thanks!
Jeff

Hello Jeff,
I am sorry to hear that you are having trouble with the sound on the Set Top Boxes. I sent you a private message to further assist you.
Thanks,
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

  • HT204380 FaceTime freezes and sound cuts out since updating I Pad2 with IOS7.0.2. Is anyone else having this?

    FaceTime freezes and sound cuts out since updating I Pad2 with IOS7.0.2. Is anyone else having this?

    reset all settings
    settings- general- reset - reset all settings
    now reconnect to wifi
    settings - wifi- click network name - enter password - join
    if issue persists backup info and restore via itunes
    Peace, Clyde

  • Sound cuts out on DVD slide shows with music

    I have tried 5 DVD slide show programs with the same result.  Hewlett Packard says my hardware is OK but I have a compatability problem.  My wife has the same compaint.  Can you help with my computer?

    Before doing anything with the computer in question, backup all the music files in question to either a flash drive or CD. Try  that music, etc on an independent computer, either friend's or at a library to see if the files are good and do not exhibit the problems that are being observed on the computer in question.  If they play OK elsewhere, then try the "Recovery Partition Manager" to return the computer to "like from the factory".  With all the software experimenting, it could be a problem between the different software installs. Once the computer is "like from the factory" again, then try to play the music that was backed up on the "factory fresh" installation without any other software installs.  Report back on how that goes.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Video problem - sound cuts out after 29 minutes.

    I have put some TV shows from my computer onto my iPod but after 29 minutes, the sound cuts out and I am left with just the video. If I skip past 29 minutes, the screen goes black for a second, then returns to the previous menu.
    My iPod is a 30GB 5G with iPod Software version 1.2.
    I used iTunes 7 and tried 7.0.1 to copy the videos to my iPod. They play fine on the computer.
    I have put films (1hr+) on before and they have worked fine, however that was with iPod software 1.1 and an older version of iTunes.
    Any ideas?

    Well sounds like the TV shows had transferred errors. Have you tried reloading them?
    Also make sure the Frame rate, and Audio rate are working ok. You will know if they are not, if voice and video are off even slightly. Also how long are the TV shows? 30 Min? If they are, then it may just be a corruption or skipped of the last min or few seconds, because the video is ending. That would explain the black screen. It does that after the video finished and it goes back to the last screen. So it just may have not copied the last few sec of the video, that happens sometimes. Try reloading it again!
    Also if that does not work, try resetting the Ipod. I would hate for you to “Restore” your Ipod for just 30-60 sec of lost sound of a TV show. Especially if everything else if working well.
    Best of luck. Don’t forget, if this post helped you, click Solved or Helped at the top of the post. It makes our rank better!
    Have a great day, and hope you fix your problem.
    P.s. it could just be that your Tv shows End at 29 min-ish as well IDK?
    God life

  • Music choice channels ,sound cutting out

    music choice channels , all of them, the sound cuts out like a skipping record.i have had online tech service tell me to re start the cable box. 2 times in the past 2 weeks, this sometimes works.new box, new hdmi cable. same problem, this is very frustrating as we like to relax to music and not have to keep "fixing" with a re-boot.  what is the permanent fix?

    ssroadstar1 wrote:
    music choice channels , all of them, the sound cuts out like a skipping record.
    i have had online tech service tell me to re start the cable box. 2 times in the past 2 weeks, this sometimes works.
    new box, new hdmi cable. same problem, this is very frustrating as we like to relax to music and not have to keep "fixing" with a re-boot.  what is the permanent fix?
    Apologies for the issue and the experience that you described above. I have asked a colleague to review your account and reach out to you so that we can get any underlying issues identified and resolved.
    Thanks for your patience.

  • I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • Sound cuts out after any given amount of time, only way to turn back on is to reboot.

    For reference, I am using a fully up-to-date mid-2012 model rMBP. Attached to my MacBook via USB I also have an M-Audio KeyStation 49i, which is where I have my headphones plugged in (probably not related in any way, but just noting this).
    I first encountered this issue while using Chrome and listening to music on SoundCloud with Garageband open after the last Mavericks update yesterday. I initially thought it was a Chrome bug, and in doing some research, I found that other Chrome users were having the same issue as me, but it was related to PepperFlash (a version of the standard Flash player), and disabling it in Chrome Canary fixed the issue for them.
    Unfortunately, it did not fix the issue for me, but I have refrained from using Chrome since then and stuck to Safari to ensure that it's not two issues with the same outcome.
    Then I stumbled across all of the Mavericks users that are having sound problems; anything from crackling/popping to not working at all. It seemed, though, that everyone that was having the sound cut out for them entirely were not only having this happen after their laptops came back from sleep mode (which is not the case for me), but were able to fix it by restarting Coreaudio[d] or -- if they had been using the headphone jack on their Macs -- they just had to plug it in again and take it back out. Neither of these worked or were applicable to my situation. Some were able to get it working again by resetting the PRAM/NVRAM, and a few others seemed to be able to bypass the issue by using Soundflower, but neither of these solutions worked for me either. The only way I can get sound to work again is to restart my computer entirely.
    After doing so, I am only able to listen to audio for a certain amount of time. It seems to vary depending on how much memory the task is taking up. Like I'll be able to listen to a track or two on SoundCloud, or attempt to record into Garageband for five minutes or so. If I'm in a Garageband project that already has a lot of tracks, I'll be lucky if I can even get through a few seconds before it cuts out entirely. There are very quiet crackling/pop sounds every once and awhile, but it is hard for me to distinguish if that is just the natural state of the hardware I am using or if it is related to background system sounds.
    I'm at wit's end trying to figure out what the problem is, mostly because there are so many others with similar issues and varying hardware/software setups that it's hard to track down exactly what my own situation is.
    I'd like to know where I should be exporting any error logs from so that someone can take a look at this issue.
    Thank you.

    After doing some additional testing, I was able to get the sound working again without rebooting by:
    1. Unplugging the MIDI device.
    2. Resetting the audio input and output to "built-in".
    3. Plugging back in the MIDI device.
    4. Changing the audio input and output back to the MIDI device.
    Still, though, the sound only lasts for a little while, and there doesn't seem to be anything indicating how or why it stops.

  • AX - sound cuts out, becomes metallic, stops

    Hi All:
    Can't find this issue in the forums. If there's a thread, please point me to it!
    For the first time today my 3-year-old AX began to behave strangely. We've always kept it up to date, so it has the latest firmware.
    This afternoon we were streaming our fave radio station SOMA.fm when the sound cut out for a moment, then restarted as a thin metallic stream. It sounded rather as if i were listening to weird jazz cymbal solo. After about 20 seconds of that, the stream just died.
    We tried changing the channel - no luck. We tried rebooting - no luck. Firmware is up-to-date. Same stream plays fine through our Macbook. Every time we restart, same behavior - streams fine for a minute, cuts out, becomes metallic, then stops.
    Any idea of root cause or another troubleshooting idea? It's always "just worked" until now from the moment we unwrapped it and plugged it in, so we're confused!
    Ty!
    F

    If you temporarily connect a pair of stereo headphones to the audio port of the AX, does the sound quality improve?
    If not, how about using a different audio source? For example, instead of the Internet radio stream to use an AAC or Apple Lossless file?
    If the sound does not improve with either of these, then it is possible the audio circuit in the AX that provides analog output is faulty.

  • Sound cutting out/crackling/pops in Windows 7 XFi XtremeGamer

    System specs:
    Windows 7 Ultimate fully updated
    Q6600 @ 3.0ghz
    Asus P5N32-E Sli Motherboard (680i Chipset) 80 bios revision w/ nVidia 5.5 nforce drivers
    2x2 Gigs Corsair ?DDR2 800 @
    In dual channel mode
    BFG 285-GTX w/ 96.2 drivers
    X-Fi XtremeGamer w/ PCDRV_LB2_8_003 drivers
    With this setup I am unable to use CMSS 3D without the audio cutting out completely. Before it does so it's usually followed with numerous cracks and po
    ps.
    Disabling CMSS 3D alleviates this problem, however I occasionally get a slight pops and crackles when playing games or listening to music.
    While playing Mass Effect 2 the sound will completely cut out in the same manner it does when I have CMSS 3D enabled, despite the option being turned off in the console launcher.
    At first I tried a clean install of the drivers, removing drivers, using driver cleaner pro, registry cleaner and then reinstalling them. Did not fix the issue. I then did the same for the chipset drivers and my video card drivers.
    I thought it may have been a problem with OpenAL (for mass effect 2) so I reinstalled that. Same problem.
    I tried using PAX's driver's, same problem.
    I've used DPC Latency Checker V.2.0 and according to it my machine should be able to handle real-time streaming audio with no dropouts.
    I'm at a loss at what else to do and any further help would be appreciated.

    Just an update on my problem.
    I was able to resolve the sound cutting out issue and the cracks/pops issue within windows by disabling CMSS3D + setting my sample rate to 24 bit, 96k Hz.. Using 92k Hz results in the cracks and pops coming back, although they are few and far between.
    Unfortunately this did not resolve my issue with the sound/audio cutting out in mass effect 2. I tried the onboard sound and that also cuts out, so I've determined it's not a hardware issue but rather a bug of some sort within the game. There are also other sparse reports of people having the same issue.
    Thanks

  • My ipod video sound cuts out after 30 sec

    I play my movie and the sound cuts out after a while and then it only plays the video with no sound. It's not the video because it works fine on my computer and all the other videos are doing the same thing. I found if I rewind or fast foreward the sound comes back but only for a little while and the sound cuts out again.

    This happens with the current firmware 1.1 upgrade on the iPod. You can downgrade the firmware to 1.0 and this will solve that problem. Doing it this way you won't have to restore the iPod which will erase it. If you can't do this then you can restore the iPod using the previous updater.
    How To: Downgrade iPod Firmware
    http://forums.ipodhacks.com/showthread.php?threadid=813
    The other option is to use QT Pro which will work to correct the problem:
    http://forums.ilounge.com/showthread.php?s=&threadid=146142
    1) Open up the Video file in Quicktime Pro
    2) Select File->Export
    3) Select "Movie to MPEG-4" beside "Export:", then click the OPtions button
    4) Select "Video" & make sure the "Video Format" is set to "Pass through"
    5) Do the same for "Audio", then hit OK
    6) Save the file

  • Why the sound cut out on my iPhone 4S?

    In any app or on the main screen the sound will randomly cut out. Phone won't ring even if ringer is on, no typing sounds, no music or sound to videos. The + and - button on the side if the phone will bring up the image on the center of the phone but no white bar under showing where column is or it increasing or decreasing. The slide bar for column disappears in apps and when you slide up to the quick access items. Some times it works perfect. Headphones work fine at all time. If sound cuts out I can put headphones in and it works. Does not instantly correct sound without headphones though. It will stay off til it feels like working again.
    Any idea what happened and how to fix it? It's about 7 months old. Never gotten wet although we live with a ton of snow and below zero temps so I don't know if going in and out from hot to cold could have caused condensation somewhere :/

    Volume not column dang auto correct!

  • Sound Cuts Out Half Way Through Clip

    I'm importing an AVI file into iMovie HD to edit it. There is nothing wrong with the file itself, there's sound the whole way through, but when I import it into iMovie the sound cuts out at a certain part. I've tried uploading it multiple times and every time the sound cuts out at the same part of the clip. I can't figure out what's wrong.

    Welcome to the discussions.
    AVI isn't a format. AVI is a container, just like MOV. These containers can contain video in any format (=codec) of the hundreds available. Which codec is YOUR video encoded with?
    http://en.wikipedia.org/wiki/Video_codec
    http://en.wikipedia.org/wiki/AudioVideoInterleave

  • Why do the movies i have bought from itunes store the sound cuts out and glitches?

    The sound cuts out of the movies I have bought. Can anyone tell me why?

    You can't. Sorry. Encrypted movies in no way can be played back thru the VGA adapter.
    You could do the following:
    - get the Apple TV and stream the video to it. If you only have VGA input in your protector, get a HDMI -> VGA converter box. I use the one at http://www.dealextreme.com/p/hdmi-to-vga-video-converter-71816 for this purpose. It's pretty cool for the price - nevertheless, there're better models for more money; let me know if you need further recommendations on them. (Note that I haven't tested this unit with a direct HDMI output from the iPad yet. Will do it soon.)
    - if the projector does have HDMI input, test it with the HDMI adapter. Hope the projector supports HDCP.

  • Sound Cuts Out During Playback-Sound Card/Audio Interface Necessary?-

    I'm a voiceover artist with the following setup:
    Sennheiser MKH 416 P48 U3 Microphone
    Yamaha HS80M Reference Monitors
    Mackie Onyx-i 1220 Mixer
    Adobe Audition CS6
    Dell Inspiron 1720 laptop (Intel Core2 Duo, CPU T5750 @ 2GHz, 32-bit)
    Until recently, I could hear anything I recorded or pre-recorded items with no issues.  However, now, as I listen to anything, the sound 'cuts out' (latency issues?).  The meters on Audition will still be moving, but I'll get no sound from my monitors.  I upgraded to Windows 7, hoping and thinking this would solve the issue, and that Audition would play nicely with Windows 7.  This 'solution' seemed to have helped, but ultimately, it did not resolve my issue.  At this point, I believe it's my sound card.  My studio quality setup seems to be too much for my consumer grade sound card.  Because my Mackie has an interface built into it, I did not believe that I needed an interface.  However, I'm beginning to question that.  So, that's part of my question.  Is an audio interface necessary for me even though I have one built into my Mackie?  If so, based on what I list for my system, does anyone have any recommendations for interfaces?  If I do not need an interface, I'd appreciate any suggestions or ideas as to what's causing the sound to 'cut out' and how to resolve it.  Any and all help, I thank you for it in advance!
    E

    Finally!  I wrote a reply a few hours back but the fine folks at Adobe took the site down just before I hit send!  Lucky I saved it elsewhere because the "recovered post" was only the first couple of paragraphs.
    Anyhow, take 2.
    Well, first off, your Mackie Onyx mixer has a firewire interface built in so it, in effect, becomes your sound card.  The one in your computer isn't involved in the recording/playback process at all (at least not unless you're trying to do something like monitor via the computer card rather than the mixer).  Therefore, buying another sound card/interface won't help at all.
    Similarly, audio dropouts aren't a latency issue, at least not directly.  Latency is the delay in the audio as it does the round trip via you sound interface (mixer) and computer.  It's more of an issue for musicians trying to be beat accurate as they over dub tracks.  However, the latency controls could be affecting your drop out problem.  The latency control in Audition is effectively controlling the buffer size--and having a larger buffer (which increases latency) also gives you playback more protection against glitches when your computer gets busy doing something else.  So...the first thing to try is increasing the latency/buffer size on the Edit/Preferences/Audio Hardware menu.
    Another thing to check is that you're using the latest drivers from Mackie--check their site and download/install the latest if there are some available.  If there's a choice, go for ASIO drivers rather than MME if there are some available.
    Also, I mentioned your computer getting busy with other things--for serious sound work shut down everything else on your computer.  Pay special attention to networking, wifi, and anti virus software, all of which are usualy prioritised to grab processor cycles over your sound work.  Also make sure you shut down all system sounds.
    Hope at least one of these suggestions works for you.

  • Sound cuts out after 1 sec on .avi files in QuickTime

    First, let me preface this post by saying that I have spent about a week searching through different posts in these and other forums regarding similar issues, and have yet to find a solution that works for me.
    So I have been trying to play certain .avi files with QuickTime that I BELIEVE have been encoded with the XviD codec. At first, no sound played at all. After installing a bunch of different codec files, including packages such as Perian and codecs such as DivX, XviD, and AC3. I finally managed to get QuickTime to play these videos with sound for about a second, after which the sound cuts out. Also, if I rewind or skip to another point in the video, the sound will restart again for about one second and then cut out once more.
    I should mention that these videos work perfectly when I play them with the DivX player. Does anyone have any suggestions or anyone with similar issues? I am currently running OS X 10.7 (Lion) on a new MacBook Pro 15"

    After installing a bunch of different codec files, including packages such as Perian and codecs such as DivX, XviD, and AC3. I finally managed to get QuickTime to play these videos with sound for about a second, after which the sound cuts out. Also, if I rewind or skip to another point in the video, the sound will restart again for about one second and then cut out once more...Does anyone have any suggestions or anyone with similar issues?
    As stated on the Perian "Support" web page, "Please consider removing obsolete QuickTime Components: FFusion, Xvid Delegate, 3ivX, DivX, DivX Decoder, XviD, msmpeg4v1, msmpeg4v2, AviImporter, EX_M4S2, Casio AVI Importer, AC3 Codec, and MatroskaQT." Having multiple codecs for the same compression formats can create component conflicts. Since Perian component package supports all of the named codecs, it is not necessary to have both Perian and the named codecs simultaneously installed.
    In addition, Lion seems to also be prone to conflicts with third-party software apps and hardware peripheral casrds/devices. If possible, it is usually best to disconnect/close anything you can during the tests. Also, it might be a good idea to test the same files on alternative systems. (I.e., if possible, you might like to post a sample problem file to see if others can play them without problem on other platforms operating under Lion OS as a further conflict test.)

Maybe you are looking for

  • Unable to connect to network with a new Laptop. ( WRT160n v3.0.02/3 and WRT54G2 v1.0.01)

    Hello,  I have never had problems with a Linksys router before until I recently got a new laptop. It was fine for the first few days, but then the connection started dropping and wouldn't come back unless I turned off the router and back on. This sta

  • Acrobat 6.0 Professional Install Error

    Hello, I just did a fresh install of Windows XP Home Edition, and when I attempted to reinstall Acrobat 6.0 Professional I received the following error message approximately 85-90% into the install process: "Internal error 2753. Dist_acrodist.exe" Do

  • OCI8 OCIBindDynamic failure to callback on random columns over multiple rows

    I am developing a set of bindings to Oracle for Python; see http://www.zope.org/Members/matt/dco2 When attempting to implement Python's executemany() method of the Python DB API, the code sets up a set of columns which are marked as DATA_AT_EXEC when

  • Derivation rule - Table look up

    Hi All, Can u explain about the Table look up, Move and Clear options in derivation rule. What type of Fields can be looked up, Moved and cleared to what characters? Can u advise me for detailed study. Regards

  • Datawindow graphical syntax outer join BUG

    Ok, so this is a bug report.  I don't know where i'm supposed to post it for SAP (i do have support). The outer join syntax is ansi. Using the graphical SQL designer, outer joins are incorrectly written by powerbuilder.  This has been going on ever s