Sound not working for text alert just vibrate
Sound not working for text alert just vibrate and no sound on keyboard
I'm having the same problem, it just started today (11/13/2012).
Settings > Sounds> Text Tone = Tri-tone
Lock Sounds = On
Keyboard Clicks = Off
The mute button is also in the correct place (ring, not mute).
Similar Messages
-
Sound Not Working for ENVY dv6 after recent updates
Not sure if it was the most recent updates that did it or if it was just random, but...my sound has stopped working. OCCASIONALLY right after I restart, I can get the sound to work for a few minutes, but that's about it. (I'm running Windows 8.1, by the way.)
I've tried the troubleshooter and it claims there's no issue. Sound card is there and working as far as I can tell; it's all enabled. I'm not muted or anything quite that trivial. I would try uninstalling an update, but I'm not sure that would even help. Prior to the update, my sound had started becoming distorted at time and a little crackly. Nothing too drastic or often, so I wasn't too bothered. Obviously, I am bothered by a complete lack of sound.
I have no idea whether or not headphones work still. I haven't been able to get the speakers working long enough to try them. "Fixit" claims it won't work with my computer, so I can't try that alternate troublershooter.
I've read every message board imaginable and updated and re-updated all my drivers. Not the issue. I have no idea what's wrong and no idea how to fix it, but it needs to be fixed.
Any help would be appreciated.Hello @samajama,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how the sound coming from your notebook's speakers is not working, and I would be happy to assist you in this matter!
To restore the sound to your notebook's system, I recommend following this document on No Sound from Speakers (Windows 8). This should help to address a specific Microsoft update that has caused sound output issues.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
The sound is not working for game apps, and possibly other apps. Sound effects work. Side switch is not on mute. Nothing, I repeat NOTHING, is muted. YouTube videos work. System sounds work. Games that are supposed to have sounds no longer have sounds.
I also cannot update the iOS system. It says that there is no internet connection but the internet works fine for everything else. I am posting this from the device. Resetting and restarting have not worked. Also, the keyboard seems to be having minor problems as well, such as capitalizing, autocorrect, etc, which used to work but now doesn't.
I have not used the iPad in over a year because of forgotten passcode, and now it has a bajillion problems!
btw, how do I change the Apple ID username and email information?You said that you "reset" and that means different things to different people so we could use some clarification on that.
For now, I would start with this. If you have already done this, please remember that is where the clarification is so important. Go to Settings>General>Reset>Reset all settings. The iPad will start up on its own when you do this. No data is lost. It all settings have to be entered again.
IF you changed your Apple ID, go to settings>ITunes & App Store>Apple ID. Sign out in there and sign in with the new ID. This is worthwhile reading and should help.
What to do after you change your Apple ID email address or password - Apple Support -
Sound not working for dv6700 PLEASE HELP!!!!
I'm having sound problems on my hp dv6700. The sound was working last night and this morning, now when I went on it all of a sudden the sound stopped working. When I plug in a set of headphones it works but the speakers don't work. If someone could please help me out, I rather not have to take it to Best Buy and pay to have them fix it.
I am experiencing the same problem, same laptop. I did try reinstalling the Conexant Audio driver but it gave me a failure message "Could Not Find Media Device for the Drive" so looking forward to suggestions.
-
Sound not working for USB Headset [Solved]
I've looked everywhere I can to find a solution for this as I'd hate to waste anyone's time. I've done everythign the wiki has said and even tried some stuff on other webpages (like including a "!" in front of pcspkr in the Modules part of /etc/rc.conf). This is currently a fresh install with only an updated pacman, password hashes, GNOME, and couple other minor changes. As far this install goes I've added -- options snd-pcsp index=2 -- to /etc/modprobe.d/modprobe.conf and installed alsa-utils. I didn't install alsa-oss this time becuase I thought I read somewhere that OSS and ALSA don't mix that well. I did install it my first time, but it didn't make any difference.
The wiki said to post these:
# lsmod|grep '^snd' | column -t
snd_usb_audio 87191 0
snd_usbmidi_lib 18516 1 snd_usb_audio
snd_rawmidi 19525 1 snd_usbmidi_lib
snd_hda_codec_realtek 295589 1
snd_seq_dummy 1479 0
snd_seq_oss 29240 0
snd_seq_midi_event 5516 1 snd_seq_oss
snd_seq 50562 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5281 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 39509 0
snd_mixer_oss 17730 1 snd_pcm_oss
snd_hda_intel 21837 0
snd_hda_codec 74609 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6222 2 snd_usb_audio,snd_hda_codec
snd_pcm 72321 4 snd_usb_audio,snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 19537 2 snd_seq,snd_pcm
snd 58906 14 snd_usb_audio,snd_usbmidi_lib,snd_rawmidi,snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7361 2 snd_hda_intel,snd_pcm
# ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Mar 4 17:12 by-id
drwxr-xr-x 2 root root 100 Mar 4 17:12 by-path
crw-rw---- 1 root audio 116, 10 Mar 4 17:12 controlC0
crw-rw---- 1 root audio 116, 12 Mar 4 17:12 controlC1
crw-rw---- 1 root audio 116, 15 Mar 4 17:12 controlC2
crw-rw---- 1 root audio 116, 9 Mar 4 17:12 hwC0D0
crw-rw---- 1 root audio 116, 8 Mar 4 17:12 pcmC0D0c
crw-rw---- 1 root audio 116, 7 Mar 4 17:31 pcmC0D0p
crw-rw---- 1 root audio 116, 6 Mar 4 17:12 pcmC0D1c
crw-rw---- 1 root audio 116, 5 Mar 4 17:12 pcmC0D1p
crw-rw---- 1 root audio 116, 4 Mar 4 17:12 pcmC0D2c
crw-rw---- 1 root audio 116, 11 Mar 4 17:12 pcmC1D0c
crw-rw---- 1 root audio 116, 14 Mar 4 17:12 pcmC2D0c
crw-rw---- 1 root audio 116, 13 Mar 4 17:12 pcmC2D0p
crw-rw---- 1 root audio 116, 3 Mar 4 17:12 seq
crw-rw---- 1 root audio 116, 2 Mar 4 17:12 timer
And here's this (The creative headset is what I'm trying to get to work)
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC889A Analog [ALC889A Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC889A Digital [ALC889A Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Headset [Creative HS-1200 Headset], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm not a terribly advanced user and am coming from about a month's worth of Linux experience from Ubuntu, but I'm here on Arch because I love the ideals of simplicity and efficiency and would love to learn about what goes on inside my computer behind the scenes. (On that note, if you know of anything that would help me learn how to fix this type of stuff on my own or anythign that would increase my understanding of what computers do behind the scenes please let me know.)
Thanks
Last edited by Arsenal (2011-03-07 06:00:32)I reformatted to get sound to work on the normal headset again. I went to those two sites you suggested, but I'm having a couple issues.
First I can't find any 'module' related item in /etc that has to do with alsa:
# find /etc -name '*module*'
/etc/syslog-ng/modules.conf
/etc/gtk-2.0/gtk.immodules
/etc/gtk-2.0/gtk.immodules-32
/etc/pango/pango.modules
/etc/pango/pango.modules-32
/etc/X11/xinit/xinitrc.d/40-libcanberra-gtk-module
This was also the only alsa.conf file I found and all it is is source code and didn't look like what the site was talking about so I didn't want to alter it.
# find / -name '*alsa.conf*'
/usr/share/alsa/alsa.conf
As far as my /etc/modprobe.d:
# ls -a /etc/modprobe.d
. framebuffer_blacklist.conf nouveau_blacklist.conf
.. modprobe.conf usb-load-ehci-first.conf
and all /etc/modprobe.d/modprobe.conf is is this:
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
and I don't have a /etc/init.d directory:
# /etc/init.d
bash: /etc/init.d: No such file or directory
I did manage to find a /proc/asound directory though that looks like it might be related to my problem.
# find / -name '*asound*'
/proc/asound
/var/lib/pacman/sync/extra/ecasound-2.7.2-1
/var/lib/alsa/asound.state
/usr/include/alsa/asoundef.h
/usr/include/alsa/asoundlib.h
/usr/include/alsa/sound/asound_fm.h
/usr/include/linux/ultrasound.h
/usr/include/sys/ultrasound.h
/usr/include/sys/asoundlib.h
/usr/include/sound/asound_fm.h
/usr/include/sound/asound.h
/usr/lib/libasound.so.2.0.0
/usr/lib/libasound.so.2
/usr/lib/libasound.so
/usr/lib32/libasound.so.2.0.0
/usr/lib32/libasound.so.2
/usr/lib32/libasound.so
# ls /proc/asound
card0 card2 CinemaTM Headset modules pcm seq version
card1 cards devices hwdep oss SB timers
# cat cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe024000 irq 16
1 [CinemaTM ]: USB-Audio - Microsoft® LifeCam Cinema(TM)
Microsoft Microsoft® LifeCam Cinema(TM) at usb-0000:00:12.2-4, high speed
2 [Headset ]: USB-Audio - Creative HS-1200 Headset
Creative HS-1200 Headset Creative HS-1200 Headset at usb-0000:00:12.0-2, full s
I tried to change the order so that the creative headset was "0" and the hda "2" via nano, but after confirming the changes and viewing the file again it always reverted back to this.
I'd like to say that I'd like to write a udev rule to change the default card when I plug/unplug the headset, but I'm not sure how to do that and would like to fix it manually before I create an automatic method so that I know what I'm doing.
**PulseAudio isn't installed atm. It seemed like even though it provided a temporary fix it didn't actually correct the problem. I hope the problems I've stated here aren't related to not having it installed. -
Iphone 5 bluetooth texting is not working in my Mercedes E550; Mercedes says it's a phone issue. Any ideas or suggestions?
If your question regards the ability of your Mercedes to access the text messages in your phone, the most likely answer is that your vehicle's audio system does not support the Message Access Profile. This Bluetooth profile was adopted in June of 2009, which means that Mercedes Benz wasn't implementing this capability mid-year.
Your Merc simply will not be able to access those messages.
If the dealer can do an update of the Firmware, it might improve the capability. But the expense of that might outweigh the ability to gain access to your texts. This is to say that there is even an upgrade possible. This is a major addition to the Bluetooth capabilities.
FWIW, up until recently, most cars havn't had this capability. The earliest adopters were Ford and BMW.
-D -
Dictation is not working for texts., Dictation is not working for texts.
My dictation feature is not working. The line is not very "wavy" when I speak. How can I rectify this problem?
Hello, alicefay50.
Thank you for the question. Try closing all open applications and power cycle the device. Test the results after processing these steps. If the issue persists, try going through the troubleshooting steps in the second article below.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Troubleshooting Siri
http://support.apple.com/kb/ts4079
Cheers,
Jason H. -
Sound not work for u tube or another program on my laptop
the sound works, but not when I play You-Tube or another program on my computer
Hi Bizygrandma,
Thanks for visiting Apple Support Communities.
The troubleshooting steps in this article can help if you do not hear sound from your iPhone speakers in some situations:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Best Regards,
Jeremy -
GUI_UPLOAD not working for text file upload with '|' as a saperater
Dear all,
I have used 'GUI_UPLOAD' to upload data from text file having below format,
1000|HBK1|HKTI
1000|HBK2|HKTI
1000|HBK3|HKTI
My code is as below
*& Report ZTEST_NEW1
REPORT ZTEST_NEW1.
TYPE-POOLS: truxs,
kcde.
TYPES : BEGIN OF ty_data2 ,
zbukr TYPE payr-zbukr ,
hbkid TYPE payr-hbkid ,
hktid TYPE payr-hktid ,
END OF ty_data2 .
DATA : it_file TYPE filetable .
DATA : wa_file LIKE LINE OF it_file .
DATA : w_rc TYPE i ,
lv_file TYPE string .
DATA : it_data2 TYPE TABLE OF ty_data2,
wa_data2 LIKE LINE OF it_data2.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-020.
PARAMETER : pr_file TYPE rlgrap-filename .
SELECTION-SCREEN END OF BLOCK bk1 .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pr_file.
PERFORM get_file.
START-OF-SELECTION.
PERFORM get_data.
FORM get_file .
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = it_file
rc = w_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5
IF sy-subrc EQ 0.
CLEAR : wa_file.
LOOP AT it_file INTO wa_file.
pr_file = wa_file-filename.
CLEAR : wa_file.
ENDLOOP.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_file
FORM get_data .
IF pr_file IS INITIAL.
MESSAGE 'Enter file name'(002) TYPE 'E'.
ENDIF.
IF pr_file CP '*.xls'
or pr_file CP '*.xlsx' . " Added
ELSEIF pr_file CP '*.txt'.
CONSTANTS : c_del TYPE c LENGTH 1 VALUE '|'.
lv_file = pr_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = lv_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = c_del
* HEADER_LENGTH = 1
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = it_data2
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
ENDFORM. " get_data
In my output I am only getting company codes and not getting other two columns, can any body guide me where I am doing wrong?
I have checked many other same kind of threads and I have done the same as suggested to do but still I am facing issue.
Thanks in advance.
Regards,
UmangHi Umang,
There is a simple solution to this problem. Make the following changes to your code(marked in red color):
REPORT ZTEST_NEW1.
TYPE-POOLS: truxs,
kcde.
TYPES : BEGIN OF ty_data2 ,
zbukr TYPE payr-zbukr ,
hbkid TYPE payr-hbkid ,
hktid TYPE payr-hktid ,
END OF ty_data2 .
types: begin of ty_data
str type char200,
end of ty_data.
DATA: it_data type table of ty_data,
wa_data type ty_data.
DATA : it_file TYPE filetable .
DATA : wa_file LIKE LINE OF it_file .
DATA : w_rc TYPE i ,
lv_file TYPE string .
DATA : it_data2 TYPE TABLE OF ty_data2,
wa_data2 LIKE LINE OF it_data2.
rest of the code **
FORM get_data .
IF pr_file IS INITIAL.
MESSAGE 'Enter file name'(002) TYPE 'E'.
ENDIF.
IF pr_file CP '*.xls'
or pr_file CP '*.xlsx' . " Added
ELSEIF pr_file CP '*.txt'.
CONSTANTS : c_del TYPE c LENGTH 1 VALUE '|'.
lv_file = pr_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = lv_file
FILETYPE = 'ASC'
*HAS_FIELD_SEPARATOR = c_del "comment this line
HEADER_LENGTH = 1
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = it_data
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
Loop at it_data into wa_data.
split wa_data-str at '|' into wa_data2-zbukr wa_data2-hbkid wa_data2-hktid.
append wa_data2 to it_data2.
clear wa_data2.
Endloop.
ENDFORM. " get_data
IT_DATA2 will contain the final uploaded data. Hope this helps -
Sound not working for non-apple Programs/plugins
I can't seem to get any sound out of flash based websites, excel (when saving for example), or several other apps.
Quake 3, and itunes still work perfectly fine.
Also, since this happened, quicktime video playback is very choppy (stopping for up to 10 seconds at a time).
This happened after installing Flip4Mac, but I've uninstalled it and nothing has changed. I can't watch youtube at all. I've turned the volume settings for the system and for the actual youtube player all the way up and down and I've seen no change.
I can view the video (and websites) but I get no sound. The same thing occurs on other user accounts on this machine as well. Very strange.
The ads on Apple.com work fine with sound and smooth playback, but MPG videos on my computer don't seem to have sound and play very choppy. The Startcraft 2 gameplay demo plays fine (AVI) and WMV's work, but MPG's and flash sites don't have sound.
Here's the overview:
Machine Name: Power Mac G5
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 1 MB
Memory: 1.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.7f1
System Software Overview:
System Version: Mac OS X 10.4.10 (8R218)
Kernel Version: Darwin 8.10.0
Also this may help, in the System profiler under Audio hardware, there are two entries.
Built In Sound Card:
Devices:
Burr Brown PCM3052:
Inputs and Outputs:
Line Level Input:
Controls: Mute, Master
Playthrough: No
PluginID: Onyx
S/PDIF Digital Output:
Controls: Mute
PluginID: Onyx
Headphones:
Controls: Mute, Left, Right
PluginID: Onyx
Internal Speakers:
Controls: Mute, Master
PluginID: Onyx
Line Level Output:
Controls: Mute, Left, Right
PluginID: Onyx
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz, 64 KHz, 88.2 KHz, 96 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz, 64 KHz, 88.2 KHz, 96 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz, 64 KHz, 88.2 KHz, 96 KHz
And
Built In Sound Card:
Devices:
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz, 64 KHz, 88.2 KHz, 96 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz, 64 KHz, 88.2 KHz, 96 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz, 64 KHz, 88.2 KHz, 96 KHz
Thanks for any help!Hi Thomas Iwaniec-
Have you tried this: Mac OS X: No audio from certain multimedia content?
Luck-
-DaddyPaycheck -
Notifications is not working for me. Just out of the blue it stopped working Friday afternoon
Notifications just stopped working the other day. I cannot figure out why or how to get it started.
Backup and then restore as new and see if it works or not.
-
My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.
Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!
-
4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
My sounds have stopped working for text, YouTube and music
My sounds have stopped working for text, YouTube and music since in downloaded new software!
I'm not sure if this will help, but I went into my sounds setting and made sure that both the "vibrate on ring" and "vibrate on silent" were selected to "on." Once I did this, I was able to get the vibrating notification for a call received (as this had previously not been the case). Hope this helps.
-
Sound is not working for my TV Shows
My sound is not working for just my TV Shows. Sound for the music is just fine. I would appreciate any help given. Thanks!
If you go back 4 pages you'll find a lot of responses about the same problem. Towards the bottom of this link to that page, Lex came up with a band-aid for the problem until iTunes gets it fixed. Lex's fix worked for me and some others. Since I did as he suggested, I have downloaded two movies and put them over to my iPod. I can also see them on my computer screen and hear them too.
Possible Temp Help
Maybe you are looking for
-
HP Cloud Print Driver for Windows Server 2003?
Hello, I have a unique (complicated) situation that I am trying to find a solution for. Here is the deal, My company is trying to set up a temporary remote branch location inside a building where we are unable to wire a network. Our solution is to us
-
Hello I sent a mixdown of my tracks to a session musician to record his parts but instead of sending a bounce mp3 i sent an M4A by mistake,now his tracks have came back and they just out of sync with the original BPM and i cant seem to be able to mat
-
KDE4 Cannot log out ,reboot, shut down
I using kde from svn and xorg from git. Before updating xorg all works fine.Now when I click on logout/reboot/shut down button nothing happen. What log should I attach to give more information ?
-
Hi, We recently upgraded the oracle version from 9.07 to 9.08. Since the upgrade out application has been performing poorly. We spoke to the Oracle DBAs and they identified this to be a latch contention problem. They changed the cursor sharing from e
-
How do I get iPhone to recognise phone numbers in Calendar entries?
Does anybody know how can I get iPhone (4S running iOS 5.1.1 with iCloud) to recognise phone numbers in Calendar entries made in Outlook 2010 for PC so that Calendar on iPhone underlines the phone number when the Calendar entry is called up and so th