Sound prob

i cant get my sound to work when playing bavk a video in internet explorer even opre and firefox eg google video youtube video and the msn winks dont have sound i tried the klite mega codec pack and done nothing. and my voice playback goes blank in the console and my midi playback as well any idears

Did you start having these problems with you sound card after a download from microsoft? I have the same problem and the only thing I did was download from microsoft.

Similar Messages

  • Sound probs

    i have the msi k7n2-l nforce2 board and when im playin bf1942 i cant turn on hardware accelaration in the sound options is this the game or do i not have hardware sound cause if i dont im gonna throw out my s-bracket and re-install my sblive 5.1 x-gamer so i can at least have accelrated sound
    the reason behind this is every one in the bf forums swear that my skipping prob is my sound and nothing else i disable everything and my game runs smooth so i have to agree with them
    any help would be appreciated )

    oh well then back to my sblive 5.1 then i didnt use the 6.1 channels anyway only have 2.1 channel speakers lol
    thx for the info

  • Mail sound probs

    Still having probs with mail sounds not playing, and I can't customize them.
    I replaced the New Mail.aiff sound inside the package contents>resources with a customized New Mail.aiff sound, and even fixed perms. Still won't recognize it....

    This thread may help you resolve your problem.
    Even though the thread relates to "mail sent", you can use the same approach for "mail sent". Just access the file that says "New Mail.aiff". There are 2 posts to follow - the first by Hervey, the second by Gina Prine (her 2nd post). Read both before trying this change, as Gina interjects a step missed by Hervey.
    As a precaution, I suggest you make a copy of the "New Mail.aiff" file - cmd D. If something goes awry, you can delete the original, then remove the word "copy" from the duplicated file. If you have to resort to this step, remember to quit the Mail program first. Good luck.

  • KT4V sound probs....:(

    Hi,
    I recently bought a new MSI board KT4 with sound and LAN on board...
    while tha LAN works fine I have troubles with the sounddrivers...
    whenever I try to play some mp3's or watch a movi after a short time my system freezes...:(
    normally it doesn't...
    so I pluged in my old Live! Player card and all probs r gone...
    are the drivers fault? should I change any settings?
    I have upgraded the bios to 1.3 and it still occurs...
    System:
    Ram simquality PC333  256 Mb
    HDD Maxtor 80Gb 5400
    CD Traxdata 4x cd-writer and LG 16x DVD
    Athlon XP 2000+
    thnx 4 any help

    Hmm strange I would try downloading the newer drivers from msi homepage and update the bios unless you havn't allready. Drop me an email if you have any more problems

  • Soundblaster Live! 24-bit No Sound Prob

    I installed this sound card on my windows xp sp2 comp and it worked fine, I went to install the same soundblaster li've! 24-bit card on my windows 2000 sp4 comp and installation went fine. My problem is I get no sound what so ever on my windows 2000 comp and my windows xp comp did, I tried plugging in different speakers, headphones, and any other audio devices I could find that I know worked(tested on numerous things besides my windows 2000 comp) and nothing works. Driver version is 5.2..34, which came directly off the CD from the retail box that I purchase. I could not find any new drivers for this sound card off Creative's website, so I figure there wasn't any new releases. My sound panel has all my volume controls at 00%, the Creative Surround Mixer has all my volume controls set at 00%, and I know for a fact I have everything plugged in correct(Audio output device plugged into green, mic plugged into blue, nothing in orange or black). Any help would be much appreciated,
    Thanks.
    EDIT: System specs are;
    AMD Athlon XP 2200+, 768mb RAM, Radeon 9600xt, FIC motherboard.
    Message Edited by Seventhwind on 2-3-2004 0:02 AM

    Seventhwind,
    Did you check Speaker Settings application and ensure that the Digital Output Only option has not been enabled.
    Also disable any onboard audio from the BIOS if any.
    Jason

  • Nomad jukebox zen nx 30gb sound prob

    please help! when i transfer my mp3's from my pc to my zen nx the tracks play but the vocals sound as if your in a swimming pool. this is with the eax in the off position
    anybody else had this problem and any suggestions as how to remedy it.

    Strange. I wondered if the headphone socket was faulty as you are only getting partial sound. Stupid question, and I'm not sure if you mentioned this before, but have you tried some other headphones?
    If this still doesn't help then you need to return it to the store you bought it from, or contact Creative Support.

  • K7N2G sound probs on win98se

    I have 16 x K7N2G based systems:
    AMD XP 2400
    512 RAM (valueram)
    ATI Radeon 9500pro
    MSI DVD
    I have installed:
    WIN98SE & all updates from windowsupdate
    used msi live update for new bios (MB)
    installed the lastest system drivers from MSI website
    I have a sound problem with games live unreal 2003 & BBC tweenies also with streaming audio from the internet (msn video & powerpuffgirls.com tested).
    I get eek....eek...eek continuosly coming over the headphones. This doesn't happen with WIN2000!
    Can anyone help!

    read this post....it is for XP but it will work on 98 also............just manually reinstall the sound drivers
    http://www.msi.com.tw/program/service/forum/index.php?threadid=14649&boardid=14&styleid=1

  • Muvo tx fm sound prob

    i just upgraded my firmware successfully from default to version .9.0... after that, i noticed the sound become too loud even at volume #... it also lost the crispness of the sound (radio and music files)...
    i also read that there's no way to revert to the default version... does creative have solution on this?

    Why you upgraded the firmware ?
    you can't go back now. If you have read the messages here in the forums
    you have seen why its very bad to upgrade, for no reson.
    sorry....

  • Audigy 2 NX Directional (backward) Game Sound Prob

    Hello.
    I recently bought one of the last few Audigy 2 NX's and I like it EXCEPT...
    I play a lot of online games (first person shooters) - Counter Strike specifically...
    and pretty much until a player is about 5 feet behind me, i cannot hear a thing ... let me elaborate
    i can throw a grenade at a pretty average length, then spin around so the nade explodes in a path that is DIRECTLY behind me, and i will not hear it ... though, if i through the same nade the same direction and length, but i am FACING the explosion, the direction and sound is fine - i hear it loud and clear
    if i am turned around and someone rushes DIRECTLY in a path behind me, i will not hear ANY footsteps until they are about 8 feet behind me in game, then i start hearing them
    obviously this isnt right!!! i obviously cant have 3 / 4 directions in game work fine, but behind me i cant hear anything... does anyone have any opinions about this? ever heard anything about this? what's going on! i have tried and experimented with a lot of different settings in the creative settings
    i have tried eax on and off, speaker settings on headphones, 2 speakers, 4, 5., and 7., ... i dont know what else to try
    i just bought it a few days ago so i know the drivers are updated ... right?
    someone help a MAN IN NEED!
    thanks
    Jeremy

    Well, I am new to high-end sound cards, and I may be misinterpreting the terminology, but the sound card is supposed to be a 24bit/96kHz card.
    I am under the impression that one should be able to set the output quality of the card to 24bits of depth and a 96kHz sample rate, despite the speaker setting that one may be using, to decode good quality audio streams (say an audio cd or the dolby digital audio of a dvd movie.) I can currently achieve this only on 2. speaker systems (or when i set the speaker setting of the card to 2.) Otherwise the maximum bit depth/sample rate I can set the card output to is a sample rate of 48kHz and a bit depth of 6bits.
    Am I mistaken in thinking that if I am playing a good quality audio stream I should be able to raise the output quality of the card to that which it is advertised and claims to have?
    Thnx

  • Jukebox Zen Xtra sound prob

    Hi, I've had my Nomad Jukebox Zen Xtra for more than 2 years and have had little problems with it. However, now I cannot get any sound out of the left speaker of any type of speaker/earphones I plug into the audiojack. This is not a speaker/earphone problem, they work with any audio equipment. I can get sound out of both left and right speakers/phones if I plug the jack only 80% into the audiojack. But if I plug the jack all the way into the player, only the right speaker/phone works. Any suggestions as to how to fix this problem?

    Hello There,
    I am experiencing the exact same problem - "Device not connected, even though I can see the device as a virtual dri've on my XP SP2 PC. I have contacted creative tech support and followed their instructions to the letter with no success.
    Creative tech support instructed me to try the following:
    <FONT face=Verdana color=#06082c size=2>MaKe sure that my antivirus software, firewall and spy ware is turned off. Their thinking was that some services are effect the connection between the MP3 device and USB port.</LI>
    <FONT face=Verdana color=#06082c size=2>Also I tried booting my XP PC in safe mode, ensuring the most of the services were turned off .. i.e. firewall, virus protection, etc. Still can not get the device to connect.</LI>
    align=center><FONT face=Verdana color=#06082c size=2>The Error message on the Device itself (Zen Xtra display) reads as follows:Firmware error on reboot -- error message simply states "firmware problem" then goes to Rescue Mode v.3 - Boot v.4, HW v0.0.displays following 4 options: Clean Up2: Format all3: Reload OS4: RebootTried all four options and still getting same error message.
    <FONT face=Verdana color=#06082c size=2>I am going to try and load the original firmware that came with Zen Xtra, if that works I will try to upgrade the firmware to the latest release.
    <FONT face=Verdana color=#06082c size=2>Later tonight I will get a chance to attempt these actions. <FONT face=Verdana color=#06082c size=2>I will post my results later.
    Message Edited by marcula on 0-24-2006 07:02 AM

  • X-fi gamer NO SOUND Prob

    hello,
    first off all my x-fi gamer card is working on my old computer.
    i have a problem with x-fi gamer. yesterday i bought a new computer. i installed win xp , all drivers , games etc. when i trying install a x-fi drivers i get blue screen(something like that 0x0000008E (0x0000005, 0x85c94cB3.0xF7A6B294, 0x0000000) . to install drivers i had to turn on on chip audio. after i install drivers everything looks fine but when i open winamp and trying to play a mp3 i keep getting error (bad direct sound driver.please instal drivers or select anoter devic in configuration error code:88780078 )
    i have this error even if im trying turn on a software stuff from x-fi. so i got no sound at all. what im trying to did to resolve my problem.
    changed slot of x-fi -doesnt help
    turn off on chip audio-doesnt help
    put off my network card and get on that slot a x-fi -i cant even open windows(blue screen on startup)
    installed newest drivers from creative-doesnt help
    installed drivers from cd-doesnt help
    my spec:
    abit LGA 775 IP35-E
    Core 2 Duo E6750 DualCore 64 Bit 2.66GHz BOX
    Patriot Dual 2x52 MB 800MHz DDR2 LLK
    EVGA GeForce 8800GTS 320MB (PCI-E) (320-bit)
    ABIT IP35-E (LGA775)
    CHIEFTEC GPS-550-AB-A 550W
    WD wd800 80GB
    any suggestions are welcome. could you help me?
    sry for my mistakes in English grammar

    Ah, that'll explain it then
    Try this. If it doesn't work, we'll figure something else out.
    Under Recorder, try and select Digital In as the Line In.
    We'll figure something out, don't worry Even fi it means uninstalling and re-installing the drivers from scratch

  • Sound Blaster 5.1 surround sound prob

    In a nutshell, I have 5. surround sound speakers. The front left and right speakers will not work. Every other speaker on the system is functioning just fine. If I change my audio source from the SB card to SigmaTel audio, ONLY the front right and left speakers and subwoofer function, so I know it's not a speaker malfunction. Any suggestions? Thanks in advance!?RunawayJim

    U need to go and set to 5. speakers in the Audio Console for the 5. speakers to work.

  • K7t 266 A Pro 2 RU Sound prob

    Hello,
    When i use the AC'97 chipset for soundS or music, i 've got a problem, the sound is going out by one speaker only (the second is quite, and not as "heavy"  as anothere way( like if there are no "mass").
    When i use my sound card (16bits sound card (fortissimo II)), then the sound is stereo and good.
    do you know why ? is it a motherboard problem or sthg else ?
    p.s:i try why pc speakers and Hifi speaker by a hifi amplifier, same result.

    Yeah basically the sound card is done for, I tried various things and no sound was coming out whatsoever - yours sounds like one channel is down, I have come across a lot these cases in various pc's where the onboard sound card has died or is in a state of dying....
    DocZaf
    {;->

  • Soundblaster live platinum 5.1 sound prob

    I have Soundblaster li've platinum 5.. I have just formatted and restored all my software.
    I can not get any sound from the inputs from the front panal of my sound card.
    I am using XP. If I uninstall the software for sound card i can then get sound through an instrument plugged into the dual line in/mic socket. But as soon as i reistall the software it goes.
    I have downloaded the patch from the site, all updates for xp service packs are installed.
    I have installed the sound card then service pack and then vice versa but still nothing.
    HELP its driving me somewhat mad.
    Andy suggestions will be greatly recieved.
    cheers
    sloman

    halfnuts wrote:
    Pay special attention to the replies from Creative staff as they are the most helpful.
    I can appreciate sarcasm as much as the next person, but I think you should take a look at the announcement at the top of each board: "These forums are primarily intended for user interaction. Read more."
    sloman - it would be strange the driver stops working once you install the driver. Did you check the mixer (when the driver is installed)? You didn't mention which options are set there, but as long as this is all selected it should work. Do the headphones work on the dri've then? Can you record from the input on the back of the card?
    Cat

  • Audigy zs platinum sound prob

    hi guys!
    just upgraded to windows vista (32bit), and having huge problems with this sound card (sb0230, audigy zs platinum).
    firsly I installed the complete drivers (around 65MB) from creative site and the sound was chopping/cracking/clicking (whatever that mean in english, **bleep**ty we would say here) when i would scroll an internet page or scroll text in word or scroll files in my computer.it even slows down a bit when scrolling. if you need to hear it, i'll post it to youtube.
    then i installed the latest beta drivers (-35mb) and no change. then i installed the daniel k. drivers and again no change.
    the onboard realtek soundcard works perfectly but has lower sound quality (too low for me).
    the system is gigabyte ga73pvm-s2 with intel E6600, 2 gb ddr800 ram, nvidia 8500gt graphic card. the analog sound output (stereo) is connected to my cambridge audio 640a amplifier , not some crap desktop speakers.
    while using windows xp there was not this problem. now using windows vista ultimate and have this huge problem.
    please help me, what to do?

    yingying,
    Have you tried uninstalling it in SafeMode?

Maybe you are looking for

  • Files will not open on my 6600

    I can not open the gallery,file manager and calendar in my nokia 6600, I already change a new MMC. What to do?

  • Unable to send or recieve mail pop up continually says wrong user I'd or password.

    UNable to send or recieve mail pop box continually says wrong user I'd or password both chiecked ok.

  • VPN and Firewall

    So I have kind of a different setup going here. I have an ISA Server 2006 at the front with a 2821 behind doing my internal routing and connecting to my voice provider and then to my CallManager. I am trying to setup the router to allow VPN connectio

  • I cannot order a calendar in iPhoto '09 (8.1.2)

    I have tried ordering a calendar on iPhoto _09 version 8.1.2 and when i click order calendar i get two options 1) Cancel or 2) Set up an account.  I already have an account and cancel definitely won't work so i click set up an account and enter my Ap

  • Importing cassette tapes into iTunes

    I may be stupid here, but is there a simple way to get my cassette music library into iTunes? I've got some great stuff from "way back when" and don't want to have to buy the CD's (many probably aren't even available now). Thanks!