Sound problem after waking from sleep

When I wake my computer from sleep the external speakers to do not produce sound. This is not related to the 'red light' issue, no red light is shining and in the sound control panel 'internal speakers' is showing.
Interesting is that when I play with the alert sounds in the control panel I can hear them, but when I adjust the volume or try to get sound out of software (iTunes, Quicktime, etc.) I can not hear anything. Also, when the computer is waking from sleep if I quickly toggle the volume control I get one or two 'clicks' before it goes silent. I have repaired the permissions according to other posts but that did not help.
However, if I plug in earphones and take them out again the volume works. . .
any suggestions?

Todd Sackett wrote:
Hi everyone, after waking from sleep, the first sound that is played is accompanied by a hissing sound for the first couple seconds. It does not happen after that at all that I have noticed. It comes out of either the speakers or headphones.
Can anyone try this: (Esp. if you have a new MB Penryn update (most recent))
1) Close lid, put to sleep.
2) Wait 5-10 mins
3) Open lid, log in to iChat (with login sound on) or make some other sound play. Listen for a hissing or static sound within the first couple seconds of whatever you just played.
Thanks for any help!
I don't observe this on my Napa-Revised Macbook

Similar Messages

  • Anyone's MacPro have problems after waking from sleep mode?

    After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.

    Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
    When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
    A. run Disk Warrior
    B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

  • Connection problems after waking from sleep????

    I'm having a strange issue with my 2012 Macbook Pro running OSx v10.8. I take my computer with me between home and school, and I usually just put it to sleep during the commute. For the last few weeks, when I got to school and woke up my MBP, it wouldn't connect to the internet. It recognized the WiFi connection, but did not assign a valid IP address. It was only when I shut the computer down and rebooted it that I was able to connect. Strangely, when I got home, I had no problem connecting to my home network, even after waking up from sleep.
    After a little while of this, it got worse. Now, even after re-starting, I am unable to connect at school. (WiFi icon shows exclamation point). This is also true for my home network.
    Here's the kicker. When I log out of my default account and log into the guest account, I have no trouble either in school or at home. Waking from sleep is never a problem and I connect everywhere. However, as soon as I log back into my other account, I lose connectivity.
    I have tried renewing my DHCP lease, or manually inputting an address, but neither of these have worked. I have resorted to using the guest account, and I want access to my old files again without having to switch back and forth.
    If anyone has any input on this, it would be greatly appreciated!! Feel free to e-mail me at [email protected]
    Thanks!

    same issue here..
    reset my network settings and reset phone a billion times already, same issue still occur. sometimes the phone will wake up with wifi and sometimes it will go to 3g, one time it went to GPRS, its just really bizarre. If i open safari it will ask if i want to join the network that i originally set up, but when i select the network it just says "unable to connect". If i just leave the phone be for a couple hours and wake it up again, it will rejoin the wifi network.
    I use remote to control my music library, but if my phone goes to sleep, it won't reconnect again so it's basically useless.
    BIZARRRRRE, driving me crazy..

  • Touchpad problem after waking from Sleep

    When I wake my Macbook Pro (Snow Leopard 10.6.1) from sleep the touchpad soft clicking doesn't work however The phsyical click does.
    It rectifies itself after about 5 minutes of use however it is quite frustrating. Any possible solutions? This problem occured in with Leopard (10.5.x) as well.

    I have exact same problem, in that in waking from sleep, cursor cannot be moved by touchpad for 1-2 minutes but moves instantly and normally via a mouse. Has been happening ever since got machine in March, regardless of OS / firmware upgrades. Any suggestions out there?

  • Problems after waking from sleep

    A few minutes ago I woke my computer from sleep (of about an hour) and didn't see the cursor (I have both the Apple wireless keyboard and mouse and had replaced the batteries on the latter earlier today, after which the mouse worked OK). Then I clicked the mouse a few times but still didn't see the cursor, and noticed that the time was not current, but was at the same time as when I had put the Mac Mini to sleep an hour previously.
    Instead of a cursor I found that I had the spinning color wheel.
    It was with some difficulty that I was able to get the key combinations to shut down the Mac Mini. Everything went OK after the restart.
    I did a Repair Permissions immediately (is it relevant that I downloaded and
    installed the iChat update 2 days ago?).
    Anyone have any idea what caused this? I have Disk Warrior on order, but it won't arrive until next week.

    No one responded to ti

  • Wi-fi internet connection problem after waking from sleep

    hi, i have a macbook pro 5,4 running 10.6.8 OS and i have a wireless issue. whenever the laptop is awkoen from sleep it will take about ~60 seconds to connect to the internet. The wifi indicates that it is connected to my home wifi almost immediately but there is just no internet. Google chrome reports that it is sending a request or redirecting in which it eventually fails to load page. this is very annoying having to wait a minute for my internet to work. i have tried downgrading my wireless card driver/extension to older 10.6.4 as i read there was a wireless issue from 10.6.5 up, but this did not fix the problem. i have also tried changing channels and settings on wireless router with no effect. i do not have any connection issues once the internet connection is established. please help. thanks!

    Have you tried it with a different mouse? I'm no expert, but you might want to find out, if the problem is mouse-specific.

  • Network problem after waking from sleep

    I have a home network. All of the computers are Win XP except this Macbook. I have them all networked through a Workgroup which works just fine. The mac has no problems finding and connecting to the Windows computers but frequently after putting the Mac to sleep and then waking it up it no longer connects to the windows work stations unless I turn Airport off and then turn it back on..
    It shouldnt be like this..any way of fixing it?

    Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

  • Problem after waking from sleep mode

    cursor begins to "paint"; must reboot to use mac. Any suggestions?

    Have you tried it with a different mouse? I'm no expert, but you might want to find out, if the problem is mouse-specific.

  • Satellite A660-18N - Powers off after waking from sleep mode

    My Satellite A660-18N powers off 2-3 seconds after waking from sleep mode. I upgraded the memory from 4GB to 8GB, using Crucial's website, so I know it's compatible. BIOS is updated to 2.00.
    Not sure what to do, how can I fix this without turning off Sleep mode completely?

    Hello
    >Currently I've turned off sleep mode altogether. I've also reset the BIOS settings from the boot menu but it hasn't fixed the problem
    And why you dont test it with pretested memory modules from an authorized service provider? The part number for such RAM is PA3677U-1M4G. Its one 4GB DDR3-1066 MHz memory module.
    Furthermore it would be interesting to know who says that Crucial memory is compatible Maybe its compatible to other Toshiba notebooks but fact is you have problems after waking from sleep mode and this happens only with Crucial memory and not with preinstalled modules.
    I dont think somebody here can provide you a solution for this because its just a compatibility issue and its user to user forum only.

  • On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this?

    On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this? Thanks --

    Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

  • Sound volume control unresponsive after waking from sleep

    Lately, a strange problem has developed on my MacBook 13-inch Aluminum (Late 2008), running Mac OS X 10.6.4:
    After waking the MacBook from sleep, the sound volume control keys on the keyboard does not affect the volume control of:
    * Neither the sound volume output by the built-in speakers,
    * nor the sound volume indicator/slider in the menubar,
    * nor the sound volume indicator/slider in the Sound preference pane in System Preferences,
    Only the sound volume slider/indicator in the Sound preference pane in System Preferences has an effect on the actual volume ouput by the built-in speakers.
    First I thought the problem was affected by disconnecting a set of analog headphones while the MacBook was sleeping -- it seemed that after sleep the volume control keys on the keyboard and menubar item still was set to affect the headphone port and not the built-in speakers.
    However, the problem just occured after sleeping without anything connected to the MacBook. The built-in speakers were muted, when the MacBook lid was closed, and the computer went to sleep - after waking from sleep the built-in speakers were unmuted - and control was only possible through System Preferences.
    Any ideas?

    Not sure if you stumbled on the other threads like this one:
    http://discussions.apple.com/thread.jspa?messageID=11801555&#11801555
    I've been having the same problem on my Mac Pro for a while, finally decided to see if there were some other people having the problem. I'll see if the others have a solution yet.
    One workaround I've been doing is to go to Preferences -> Sound and select a different output device. For me, I have to flick to Internal Speakers and then back to Line Out.
    Brett

  • My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero

    My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero.  I don't recall spilling anything or jamming it just that it worked before I closed the computer and wasn't after I woke it up.
    I would like to fix the key but if that's not possible right away , Is there a way to reset my password without being able to type with a key thats in it?

    Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
    When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
    A. run Disk Warrior
    B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

  • "Photoshop transparent background" after waking from sleep

    Anyone experienced this problem? Photoshop users will be familiar with the terms I'm using to describe this issue...
    After waking from sleep, my iMac will display the screen saver -- in this case, "Beach" -- in a frozen state (not moving at all). The photo has a lower opacity, with a checkered background similar to what you'd see in Photoshop when the background is Transparent rather than opague. Clicking on the mouse or keyboard has no effect, but when I turn the power off and then on again, all is back to normal, with the Leopard desktop and Dock back in their normal places.
    Is this the system freeze that folks have been talking about?

    Ok I am not that fmrealer with Photoshop. But this is what I would do.
    1. Resart my computer.
    2. Call apple or Photoshop.
    3. Re install Photoshop.
    4. It is not the end of the world and it sounds kind of cool.

  • Keyboard volume keys don't work after waking from sleep

    This problem has existed for many months on my 2009 Mac Pro. I'm running 10.6.3. The problem is reproducible 100% of the time. I use external speakers. Sound output is set to "Line Out."
    1. Boot machine. External speakers work fine. Volume keys on keyboard (F11, F12) work correctly.
    2. Put machine to sleep.
    3. After waking from sleep, F11 and F12 no longer control the volume of the external speakers. The "pop" noise when hitting F11 and F12 is emitted from the internal speaker. The mute key (F10) does work for the external speakers, however.
    4. The keyboard volume controls become responsive again by switching the sound output from Line Out to another output option and then back to Line Out.
    This bug is a huge hassle. Does anyone have a solution?

    I have several mid-2009 8-core Mac Pro's, all running Snow Leopard, and all have been having this problem as well.
    I will not guarantee this is going to work for anyone else....but we have found a (slightly inelegant) workaround for it that has been working for several weeks now without fail.
    Prior to putting your MacPro to sleep, run the volume all the way up and leave it there. Afterwards, put it to sleep as usual. We use the keyboard to do this, but I would imagine any method should have the same affect. However, I've not experimented.
    Anyway...this has worked 100% of the time for us. The only downside of it is that you have to remember to run it up before....and then back down after waking (else that first alert sound or music file you play will really wake YOU up!)
    If this works for anyone else, let me know.
    Apple should never have let this one out the door with this bug. Especially, as Apple Support is....wanting, at best.
    ...sT

  • My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep.  Is there any way to make this instant?

    Hi
    My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep.  Does anyone else have this problem and is there a fix?
    Alan

    coxorangepippin wrote:
    The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
    What that means is that is can't be used with Lion 10.7.  PowerPC was the chip Apple used up until 2006 when they switched to Intel.  At that point, they created the Rosetta emulator to allow for PPC support for 5 years.  They finally dropped the support with the release of Lion.  It will only work with OS X 10.6 or earlier.  The other option is to purchase a new GPS, which can be had for $100 for a decent one.

Maybe you are looking for

  • How do I pass input values from an OTL timecard to a Fast Formula (FF)?

    Hi - I hope my question is a simple one, but after hours of searching I have a feeling it is not. I currently have a FF rule that checks if benefit hours were entered in whole or half day increments. If not, an error is shown after 'Continue' is clic

  • Day 5 with BT...

    Ok so since the 10 day training period started, I've had one disconnection. That's it. My sync is still 500Kbps lower than it was with my previous ISP meaning that I only sync enough to get 3.5mb instead of the 4mb I was getting before. Latency has b

  • Using the new HTML 5 tags

    I can't  get the new HTML5 tags section, header and footer to work on my page.  When I change the divs to section it totally screws up the page rendering.I added the appropriate CSS to my style sheet.  What do I do? Here is the oiginal code: <!DOCTYP

  • A Mac's computer name

    Where can I find my Mac's computer name? Thanks.

  • Meta Chains

    Dear Gurus, Is there any kind of "How to.." document of Meta Chains which can guide me through. Thanks in anticipation. Brgds, Dhruv Please search the forum before posting the thread Edited by: Pravender on Apr 12, 2011 7:05 PM