Sound Variation after taking a call...

Hi All,
Figured I would give this a try. Here's my issue:
When ipod comes back on after taking a call, the sound is dramaticlly lower than before the call. The only way to get the volume back to its original "loudness" is to shut off and restart iphone. I don't think this is an AT&T problem because it's a function of the hardware. Anyway, if anyone knows how to fix this, please let me know.
This variation could be an issue for Apple. Wouldn't want a consumer's eardrums to be blasted due to the unpredicatble sound variation.
iphone Mac OS X (10.3.1)

Bingo! EXACT same problem here! It seems to me its a software bug.. ??

Similar Messages

Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?

Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?

Hello ElleMalloy,
Sorry Im Just Responding Phone Has Been Downloading And Charging.
Well I Will Start Here,
I Tried Everything I Even Restarted My Settings Just So I Can See if That Would Work Because Someone Sujested It But What They Neglected To Say That Their Probrolem Was With A Ipad ? Anywho To Keep It Short I Went Online Logged A Complaint With Apple Made A Appointment With A Apple Store In My Area To Take The Phone There After Trying Everything (Resetting, changing setting etc..........) Nothin Worked Upon Taking The Phone To The Store They Swapped Out My Phone For A New One Volume On New Phone Is Perfect And I Only Had To Wait 40 Minutes

After update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

after update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

Maybe I understood your problem. Get to Settings > Sounds > Ringers and Alerts >Turn Change With Buttons to Off. And if your Side Switch is assigned to 'Mute', turn it back on, else, use the control center to turn off mute.
P/s: And your name is...

Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one non panoramic shot? I think this happens when you switch direction of the panoramic arrow.

Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one 'non panoramic shot? I think this happens when you switch direction of the panoramic arrow.

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Exception occurs after taking several photos

My application crashes after taking several photos ( always about 5-8 times), the output information in console listed here:
2008-10-07 20:04:09.999 Schmapper[1325:20b] * -[NSConcreteMutableData count]: unrecognized selector sent to instance 0x167cb0
2008-10-07 20:04:10.031 Schmapper[1325:20b] * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSConcreteMutableData count]: unrecognized selector sent to instance 0x167cb0'
2008-10-07 20:04:10.060 Schmapper[1325:20b] Stack: (
808163835,
806099672,
808167517,
807899933,
807794784,
33587,
817892368,
817893624,
816439824,
816461524,
816482588,
24311,
44341,
816680684,
43269,
816688420,
816674244,
816675100,
33253,
817958924,
821010112,
821004660,
820904572,
820999608,
807795273,
812083835,
807779567,
807777675,
829004012,
816177936,
816214500,
10589,
8244
terminate called after throwing an instance of 'NSException'
I use @try block in the 'didFinishPickingImage' delegate method, but it won't goes into the exception handler, instead crashing directly. does anybody meet the same problem? how should I do to fix it?

thanks Rogalon,
yes it did receive memory warning , and only call the method of super class like
- (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning]; // Releases the view if it doesn't have a superview
// Release anything that's not essential, such as cached data
after picking the photo, I save the image data to a temporary file and release the UIImagePickerController object. and I did check memory allocation with instruments, there is no memory leaks.
today I found that because of the UIWebView, the problem won't appear so frequently if I disable the UIWebView in the application. If I enable the UIWebView in the application, it will cause the problem above and sometimes exit with status 101. And, there are some memory leaks after enable UIWebView

Is it recommened to flush shared pool after taking statistics??

Hi, all.
The database is 2 node RAC 10.2.0.2.0 on 32-bit windows 2003 EE SP1.
I stoped the default statistics-gathering-job of GATHER_STATS_JOB
because it takes statistics of all objects in database and it runs everyday.
In addition, it seems to cause "library cache related" wait events in a RAC
environment.
I have a plan to take statistics of ONLY an application schema, not all objects
of a database, by using GATHER_SCHEMA_STATS procedure.
Is it recommended to flush shared pool after taking statistics of an application
schema??
Thanks and Regards.

Is it recommended to flush shared pool after taking
statistics of an application
schema??neednt cause whenever you gather stats either its system or not oracle age out the plan and regenerate the new plan on the basis of new gathered stats,see how oracle is smart.
SQL> create table t as select rownum a,object_name
2    from all_objects
3 /
Table created.
SQL> alter system flush shared_pool
2 /
System altered.
SQL> alter session set sql_trace=true
2 /
Session altered.
SQL> declare
2   va t.a%type;
3 begin
4   for i in 1..100
5   loop
6    execute immediate 'analyze table t compute system statistics';
7    select a into va
8      from t
9     where a=i;
10   end loop;
11 end;
12 /
PL/SQL procedure successfully completed.
SELECT a from t
   where a=:b1
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute    100      0.12       0.11          0          0          0           0
Fetch      100      0.26       0.32          0      11800          0         100
total      201      0.39       0.44          0      11800          0         100
Misses in library cache during parse: 1
Misses in library cache during execute: 99
Optimizer goal: CHOOSE
Parsing user id: 59     (recursive depth: 1)
Rows     Row Source Operation
      1 TABLE ACCESS FULL T
Misses in library cache during execute: 99 shows you aging out the plan after every gathering stats.
Khurram

No sound recorded when taking a video using iPhone 4 running iOS 7.1.1

Symptom: Randomly, no sound recorded when taking a video. (mics are dirt free and not blocked)
What fixed it: Restarting the phone after noticing Pandora couldn't play sound either.
Note: The video recorded before the restart still has no sound, meaning the glitch prevents sound from being recorded as well as being played from apps.
Question: Why hasn't Apple come up with an update to fix the software glitch causing this? Its obvious based on discussions as far back as 2010 that this has been an issue!
Hope this helps some people who are experiencing this issue.

Same problem. Now I have use Itunes alternative. Problem never with either IOS or Itunes

IOS 5.0.1 on 3GS Crashing-Restarting sometimes after taking a photo and verry slow

Hello,
My Iphone 3Gs is crashing and restarting sometimes after taking a picture. This is not always but verry often.
The Iphone is also verry slow since IOS 5 , a big fault from Apple is that they have not put a warning when update a 3GS to IOS 5 that is will be almost unusable.
When pressing on the small button on top of the iphone , it takes sometimes more than 10 seconds until the phone is locked. I hear the click when it is already in my pocket.
also the same when ending or stating a call it is so slow that sometime i am calling to somebody else in my list.
Is there a solution to put it back to the latest 4.3 version ?
Thanks
Best regards
Didier

I had the same problem with my 3Gs - rebooting every two minutes or so, but only when plugged into the charger. Eventually, I remembered that I had taken a couple of photos with the phone.
So, I deleted the photos from the phone and the problem vanished.
Must be something to do with incompatability with the older camera systems.

Sound problems after iOS 4.2 upgrade

Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

Blank screen after Ending a call on Asha 501

I got a new Asha 501 last week. I am very happy with the product and its worth for the money spent.
However, two issues i have noticed so far and its bothering me a bit
1. after ending a call the screen goes blank and sometimes it takes a bit to end the call. This is very awkward during some important calls. would appreciate if there is any solution for this.
2. Mail app takes a long time to load the message contents. I know 2g is not the fastest connection but still this is too slow even for 2g.
best,
Selvan

1. On call, when you bring your phone near to your ear, the Proximity sensor recognises your ear and turn off the screen so that there is no unwanted inputs as the screen touches your skin. But when you pull it back, it turns the screen on again, but it takes 0.5-1 second to the Max.
If it takes longer, make sure there is nothing in front of sensor (it is placed on top left), like Plastic lamination, some accessory, dust or while you pull off your phone, your finger should not be there.
If it still takes longer, better make your device checked at Nokia Care. If found some problem, they will change the sensor.
2. The mail app is working perfectly fine for me on Wi-Fi. You should try loading some websites in browser, if it takes longer, check network strength, it should be strong on 2G internet (Personal experience- BSNL 2G, residing near Network tower, slow like hell, in INDIA). Try changing provider.
Source- Personal experience (owning a Nokia 501)

Since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
The crashing were stopped! also the battery was back to normal.
I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
Adding the mail accounts back, still everything work ok
Hope this solution will help you too,
Enjoy!

HDR camera mode shows "Saving" for a long time after taking a picture

I noticed that after taking a photo in the HDR mode with the camera on 4.1 (4th Gen phone), the "Saving Photo" and spinning icon persist on the screen. The only way to stop it is to tape the top button on the phone, which shuts off the screen. When I go back the photo appears to be saved with no harm. Anyone else have this lag?
It makes taking another photo very slow.

You must have an older iPhone. My iPhone 4 takes about several seconds to save them, which was kinda annoying first. I'm not taking pictures in a rapid succession so I guess it is not that bad, taking into account a better quality of the HDR pics. I hope Apple fixes this delay in the future update of the iOS.
I was wondering though if we disable keeping of a non-HDR picture, would that speed it up? (Settings -> Photos -> Keep Normal Photo -> Off)
In your case, Fred, it would probably be better to shoot in a normal (non-HDR) format due to older hardware.

Is there an app where it saves your photo shortly after onto the web/online after taking a picture?

Is there an app where it saves your photo shortly after onto the web/online after taking a picture? In essense, I want to be able to take a picture with the stock camera app on the Iphone 4 and have it saved immediately online after...without hooking it back onto a computer...completely automatic and wireless/using internet data.
Thanks very much.

If you're running iOS 5.1 or later you could use Photo Stream. See http://www.apple.com/icloud/features/photo-stream.html and http://support.apple.com/kb/HT4486. It will upload up to 1000 photos to iCloud.com for 30 days.

Import parameter is empty after an RFC call from BW to JCo

I am calling a Java function (implemented using JCO and deployed on J2EE stack of the Portal box) from within a user-exit in BW (on a separate box) using RFC. The code in BW looks like:
CALL FUNCTION 'Z_BW_VALIDATE_PROXY' DESTINATION 'ACF2PROXY'
    EXPORTING
        IREQUESTOR = 'AE012345'
        IREQUESTED = '012345'
    IMPORTING
        ERESULT = lv_result
    EXCEPTIONS
        SYSTEM_FAILURE = 1 message lv_rfc_mess
        COMMUNICATION_FAILURE = 2 message lv_rfc_mess.
The following are working/setup correctly:
1. RFC destination ACF2PROXY, in BW using transaction SM59;
2. Java function 'Z_BW_VALIDATE_PROXY' , as the server log on the Portal(J2EE) shows the correct IMPORT and EXPORT parameters after processing a call from BW;
The data types of the parameters in the function call above matches with those of the formal parameters in Java function where they are defined using JCO data types (export parameter is defined at CHAR 1 at both places).
The problem is that I am not getting any value back in the IMPORT parameter 'lv_result'. I am expecting either '0' or '1' which is populated correctly in the Java function.
Any insight is appreciated.

The following is the code of the method in the class that inherits from JCO.Server. In this method the export parameter ERESULT is set with the value of variable 'result'. I thought it may be helpful to reporduce it here.
protected void handleRequest(JCO.Function function) throws MMException
          if (function == null) {
              LOGGER.logInfo("handleRequest - JCO.Function object is null.");
               return;
          LOGGER.logDebug("handleRequest(" + function.getName() + ")");
          //process this function only, although I don't know what else would fall to this
          //server request method...
          if (function.getName().equalsIgnoreCase(ACF2Listener.ABAP_RFC_PROXY_FUNCTION)) {
               //get input & output definitions from RFC. These are defined in the repository interface definition
               JCO.ParameterList input = function.getImportParameterList();
              JCO.ParameterList output = function.getExportParameterList();
              LOGGER.logDebug("Received the following from ABAP: " + input.toString());
              String requestor = input.getString("IREQUESTOR");
              String requested = input.getString("IREQUESTED");
              //call DAO to read ACF2 for these values
              String result = null;
              try {
                   ACF2DAO acf2 = ACF2DAO.getInstance();
                   if (acf2 != null) {
                        result = acf2.getACF2Delegation(requestor,requested);
              catch (MMException e) {
                  LOGGER.logError("Exception occured during ACF2 DAO lookup: " + e.getMessage());
                  throw e;
             output.setValue(result, "ERESULT");
             LOGGER.logDebug("ACF2 Service Call returning: " + output.toString());
          else {
               throw new JCO.AbapException("NOT_SUPPORTED","This service is not implemented by the ACF2 Proxy external server.");
Thanks
Sanjeev

After making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?

after making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?

Try to position your iphone that the screen is facing away from your skin.
Make sure that the back part of your phone will be the one that will contact your skin inside your pocket
Thats what i do:)

Sound Variation after taking a call...

Similar Messages

Maybe you are looking for