SoundBlaster 5.1 no surround sound with the speaker test, but with movies

ISoundBlaster 5. no surround sound with the speaker test, but with moviesO Hello I have a new SoundBlaster XFi Surround 5. USB.
I installed the drivers on Vista 32.
I connected the Soundblaster with an optical cable with my home cinema system.
I checked the 5. speakers option in the Creative Console Starter.
When I will test the surround function by clicking the speakers in the surround test diagramm from the Console.
The front speakers are sending an testsignal, but the rear speakers and the center are silent.
I thought that are settings in the soundcontrol from vista but when I play an Movie with 5. sound, the rear speakers function.
Is ist the optical mode that only support the movie dts signal? Why the Console test from creative doesn't function?
I have further applications but they don't work. Only movies.
Thx

Hi,
S/PDIF?format can only transmit 2 channels of uncompressed audio, which is why you only hear the front channels. For movie dts, an encoded compressed stereo data is transmitted through the S/PDIF optical link to your home cinema system which then decode it into 5. audio.

Similar Messages

I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN .

HI All,
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN . the WLC are providing the HQ and one of the Branches the Wireless services .
Am using all the available 9 SSIDs at the HQ , and am using only 4 of it at the Brnche.
The problem that i have are happening only at the Branch office as i cant room between the SSIDs within Diferent VLANs but i can do it with the one that pointing to the same VLAN. Once the client ( Laptop/Phone ) connected to one of the SSIDs. it imposiible to have him connected to the other ones with Different VLAN. meanwhile, It says its connected to the other SSID but its not getting IP from that pool.
here is the Show Run-Config from my WLC .. and the Problem happening between the SSID AMOBILE and ASTAFF. i have the Debug while am switching between the SSIDs if needed .
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.04 10:20:47 =~=~=~=~=~=~=~=~=~=~=~=
show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis"   , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V01, SN: FCW1535L01G
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.235.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLAN Controller 5508
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 10.125.18.15
Last Reset....................................... Software reset
System Up Time................................... 41 days 5 hrs 14 mins 42 secs
System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... US - United States
--More or (q)uit current module or <ctrl-z> to abort
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +20 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 10
Number of Active Clients......................... 61
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
AP Bundle Information
Primary AP Image Size
ap3g1             5804
ap801             5192
ap802             5232
c1100             3096
c1130             4972
c1140             4992
c1200             3364
c1240             4812
c1250             5512
c1310             3136
c1520             6412
c3201             4324
c602i             3716
Secondary AP Image      Size
ap801             4964
c1100             3036
--More or (q)uit current module or <ctrl-z> to abort
c1130             4884
c1140             4492
c1200             3316
c1240             4712
c1250             5064
c1310             3084
c1520             5244
c3201             4264
Press Enter to continue or <ctrl-z> to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
       case-check ...........Enabled
       consecutive-check ....Enabled
       default-check .......Enabled
       username-check ......Enabled
Press Enter to continue or <ctrl-z> to abort
Network Information
RF-Network Name............................. OGR
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
--More or (q)uit current module or <ctrl-z> to abort
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Fast SSID Change ........................... Enabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or <ctrl-z> to abort
Port Summary
           STP   Admin   Physical   Physical   Link   Link
Pr Type   Stat   Mode     Mode     Status   Status Trap    POE   SFPType
1 Normal Forw Enable Auto       1000 Full Up     Enable N/A     1000BaseTX
2 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
3 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
4 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
5 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
6 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
7 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
8 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
Press Enter to continue or <ctrl-z> to abort
AP Summary
Number of APs.................................... 8
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
KNOWLOGY_DC01       2     AIR-LAP1131AG-A-K9   00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1       US       1
KNOWLOGY_DC02       2     AIR-LAP1131AG-A-K9   00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1       US       1
KN1252_AP01         2     AIR-LAP1252AG-A-K9   00:21:d8:ef:06:50 Knowlogy Confere 1       US       1
KN1252_AP02         2     AIR-LAP1252AG-A-K9   00:22:55:8e:2e:d4 Server Room Side 1       US       1
Anham_AP03           2     AIR-LAP1142N-A-K9     70:81:05:88:15:b5 default location 1       US       1
ANHAM_AP01          2     AIR-LAP1142N-A-K9     70:81:05:b0:e4:62 Small Conference 1       US       1
ANHAM_AP04           2     AIR-LAP1131AG-A-K9   00:1d:45:86:e1:b8   Conference room 1       US       1
ANHAM_AP02           2     AIR-LAP1142N-A-K9     70:81:05:96:7a:49         Copy Room 1       US       1
AP Tcp-Mss-Adjust Info
AP Name             TCP State MSS Size
KNOWLOGY_DC01       disabled   -
KNOWLOGY_DC02       disabled   -
--More or (q)uit current module or <ctrl-z> to abort
KN1252_AP01         disabled   -
KN1252_AP02         disabled   -
Anham_AP03           disabled   -
ANHAM_AP01           disabled   -
ANHAM_AP04           disabled   -
ANHAM_AP02           disabled   -
Press Enter to continue or <ctrl-z> to abort
AP Location
Total Number of AP Groups........................ 3
Site Name........................................ ANHAM8075
Site Description................................. ANHAM 8075 Location
WLAN ID         Interface         Network Admission Control         Radio Policy
1               knowlogy_ogr         Disabled                         None
6               knowlogy_ogr         Disabled                         None
9               knowlogy_ogr         Disabled                         None
7               knowlogy_ogr         Disabled                         None
AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
Anham_AP03           2     AIR-LAP1142N-A-K9   70:81:05:88:15:b5 default location 1     US       1
ANHAM_AP01           2     AIR-LAP1142N-A-K9   70:81:05:b0:e4:62 Small Conference 1     US       1
ANHAM_AP04           2     AIR-LAP1131AG-A-K9   00:1d:45:86:e1:b8   Conference room 1     US       1
ANHAM_AP02           2     AIR-LAP1142N-A-K9   70:81:05:96:7a:49         Copy Room 1     US       1
Site Name........................................ Knowlogy_DC
--More or (q)uit current module or <ctrl-z> to abort
Site Description................................. DC Center Access points
WLAN ID         Interface         Network Admission Control         Radio Policy
2               knowlogy_ogr         Disabled                         None
4               knowlogy_ogr         Disabled                         None
3               knowlogy_ogr         Disabled                         None
AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
KNOWLOGY_DC01       2     AIR-LAP1131AG-A-K9   00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1     US       1
KNOWLOGY_DC02       2     AIR-LAP1131AG-A-K9   00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1     US       1
Site Name........................................ OGR
Site Description................................. 1934 OGR Office
WLAN ID         Interface         Network Admission Control         Radio Policy
1               knowlogy_ogr         Disabled                         None
2               knowlogy_ogr         Disabled                        None
4               knowlogy_ogr         Disabled                         None
6               knowlogy_ogr         Disabled                         None
--More or (q)uit current module or <ctrl-z> to abort
7               knowlogy_ogr        Disabled                         None
9               knowlogy_ogr         Disabled                         None
8               knowlogy_ogr         Disabled                         None
AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
KN1252_AP01         2     AIR-LAP1252AG-A-K9   00:21:d8:ef:06:50 Knowlogy Confere 1    US       1
KN1252_AP02         2     AIR-LAP1252AG-A-K9   00:22:55:8e:2e:d4 Server Room Side 1     US       1
Site Name........................................ default-group
Site Description................................. <none>
WLAN ID        Interface         Network Admission Control         Radio Policy
1               knowlogy_ogr         Disabled                         None
2               knowlogy_ogr         Disabled                         None
3               knowlogy_ogr         Disabled                         None
4               knowlogy_ogr         Disabled                         None
5               knowlogy_ogr         Disabled                         None
6               knowlogy_ogr         Disabled                         None
7               knowlogy_ogr         Disabled                         None
8               knowlogy_ogr         Disabled                          None
--More or (q)uit current module or <ctrl-z> to abort
9               knowlogy_ogr         Disabled                         None
10             management           Disabled                         None
AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
Press Enter to continue or <ctrl-z> to abort
AP Config
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch IP Address.................. 10.125.18.15
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abortIP Address.................. 10.125.18.15
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
      Native ID :..................................... 22
      WLAN 2 :........................................ 21
      WLAN 4 :........................................ 25
      WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
    Radio Type................................... RADIO_TYPE_80211b
   Administrative State ........................ ADMIN_ENABLED
   Operation State ............................. UP
   Radio Role .................................. ACCESS
   CellId ...................................... 0
   Station Configuration
     Configuration ............................. AUTOMATIC
     Number Of WLANs ........................... 3
     Medium Occupancy Limit .................... 100
     CFP Period ................................ 4
     CFP MaxDuration ........................... 60
     BSSID ..................................... 00:1d:71:09:8f:90
     Operation Rate Set
       1000 Kilo Bits........................... MANDATORY
       2000 Kilo Bits........................... MANDATORY
       5500 Kilo Bits........................... MANDATORY
       11000 Kilo Bits.......................... MANDATORY
     Beacon Period ............................. 100
     Fragmentation Threshold ................... 2346
     Multi Domain Capability Implemented ....... TRUE
--More or (q)uit current module or <ctrl-z> to abort
     Multi Domain Capability Enabled ........... TRUE
     Country String ............................ US
    Multi Domain Capability
     Configuration ............................. AUTOMATIC
     First Chan Num ............................ 1
     Number Of Channels ........................ 11
   MAC Operation Parameters
     Configuration ............................. AUTOMATIC
     Fragmentation Threshold ................... 2346
     Packet Retry Limit ........................ 64
   Tx Power
     Num Of Supported Power Levels ............. 8
     Tx Power Level 1 .......................... 20 dBm
     Tx Power Level 2 .......................... 17 dBm
     Tx Power Level 3 .......................... 14 dBm
     Tx Power Level 4 .......................... 11 dBm
     Tx Power Level 5 .......................... 8 dBm
     Tx Power Level 6 .......................... 5 dBm
     Tx Power Level 7 .......................... 2 dBm
     Tx Power Level 8 .......................... -1 dBm
--More or (q)uit current module or <ctrl-z> to abort
     Tx Power Configuration .................... AUTOMATIC
     Current Tx Power Level .................... 1
   Phy DSSS parameters
     Configuration ............................. AUTOMATIC
     Current Channel ........................... 11
     Extension Channel ......................... NONE
     Channel Width.............................. 20 Mhz
     Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
     Current CCA Mode .......................... 0
     ED Threshold .............................. -50
     Antenna Type............................... INTERNAL_ANTENNA
     Internal Antenna Gain (in .5 dBi units).... 8
     Diversity.................................. DIVERSITY_ENABLED
   Performance Profile Parameters
     Configuration ............................. AUTOMATIC
     Interference threshold..................... 10 %
     Noise threshold............................ -70 dBm
     RF utilization threshold................... 80 %
     Data-rate threshold........................ 1000000 bps
     Client threshold........................... 12 clients
     Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or <ctrl-z> to abort
     Coverage exception level................... 25 %
     Client minimum exception level............. 3 clients
   Rogue Containment Information
   Containment Count............................ 0
   CleanAir Management Information
       CleanAir Capable......................... No
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
      Native ID :..................................... 22
      WLAN 2 :........................................ 21
      WLAN 4 :........................................ 25
      WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
Attributes for Slot 1
   Radio Type................................... RADIO_TYPE_80211a
   Radio Subband................................ RADIO_SUBBAND_ALL
   Administrative State ........................ ADMIN_ENABLED
   Operation State ............................. UP
   Radio Role .................................. ACCESS
   CellId ...................................... 0
   Station Configuration
     Configuration ............................. AUTOMATIC
     Number Of WLANs ........................... 3
     Medium Occupancy Limit .................... 100
     CFP Period ................................ 4
      CFP MaxDuration ........................... 60
     BSSID ..................................... 00:1d:71:09:8f:90
     Operation Rate Set
       6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
       9000 Kilo Bits........................... SUPPORTED
       12000 Kilo Bits.......................... MANDATORY
       18000 Kilo Bits.......................... SUPPORTED
       24000 Kilo Bits.......................... MANDATORY
      36000 Kilo Bits.......................... SUPPORTED
       48000 Kilo Bits.......................... SUPPORTED
       54000 Kilo Bits.......................... SUPPORTED
     Beacon Period ............................. 100
     Fragmentation Threshold ................... 2346
     Multi Domain Capability Implemented ....... TRUE
     Multi Domain Capability Enabled ........... TRUE
     Country String ............................ US
   Multi Domain Capability
     Configuration ............................. AUTOMATIC
     First Chan Num ............................ 36
     Number Of Channels ........................ 20
   MAC Operation Parameters
     Configuration ............................. AUTOMATIC
     Fragmentation Threshold ................... 2346
     Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
   Tx Power
     Num Of Supported Power Levels ............. 7
     Tx Power Level 1 .......................... 15 dBm
     Tx Power Level 2 .......................... 14 dBm
     Tx Power Level 3 .......................... 11 dBm
     Tx Power Level 4 .......................... 8 dBm
     Tx Power Level 5 .......................... 5 dBm
     Tx Power Level 6 .......................... 2 dBm
     Tx Power Level 7 .......................... -1 dBm
     Tx Power Configuration .................... AUTOMATIC
     Current Tx Power Level .................... 1
   Phy OFDM parameters
     Configuration ............................. AUTOMATIC
     Current Channel ........................... 44
     Extension Channel ......................... NONE
     Channel Width.............................. 20 Mhz
     Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
       ......................................... 104,108,112,116,132,136,140,
       ......................................... 149,153,157,161
     TI Threshold .............................. -50
     Antenna Type............................... INTERNAL_ANTENNA
     Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
     Diversity.................................. DIVERSITY_ENABLED
   Performance Profile Parameters
     Configuration ............................. AUTOMATIC
     Interference threshold..................... 10 %
     Noise threshold............................ -70 dBm
     RF utilization threshold................... 80 %
      Data-rate threshold........................ 1000000 bps
     Client threshold........................... 12 clients
     Coverage SNR threshold..................... 16 dB
     Coverage exception level................... 25 %
     Client minimum exception level............. 3 clients
   Rogue Containment Information
   Containment Count............................ 0
   CleanAir Management Information
       CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
--More or (q)uit current module or <ctrl-z> to abort
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
      Native ID :..................................... 22
      WLAN 2 :........................................ 21
      WLAN 4 :........................................ 25
      WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
   Radio Type................................... RADIO_TYPE_80211b
   Administrative State ........................ ADMIN_ENABLED
   Operation State ............................. UP
   Radio Role .................................. ACCESS
   CellId ...................................... 0
    Station Configuration
     Configuration ............................. AUTOMATIC
     Number Of WLANs ........................... 3
     Medium Occupancy Limit .................... 100
     CFP Period ................................ 4
     CFP MaxDuration ........................... 60
     BSSID ..................................... 00:22:55:a5:0c:30
     Operation Rate Set
       1000 Kilo Bits........................... MANDATORY
       2000 Kilo Bits........................... MANDATORY
       5500 Kilo Bits........................... MANDATORY
       11000 Kilo Bits.......................... MANDATORY
     Beacon Period ............................. 100
     Fragmentation Threshold ................... 2346
     Multi Domain Capability Implemented ....... TRUE
     Multi Domain Capability Enabled ........... TRUE
--More or (q)uit current module or <ctrl-z> to abort
     Country String ............................ US
   Multi Domain Capability
     Configuration ............................. AUTOMATIC
     First Chan Num ............................ 1
     Number Of Channels ........................ 11
   MAC Operation Parameters
     Configuration ............................. AUTOMATIC
     Fragmentation Threshold ................... 2346
     Packet Retry Limit ........................ 64
   Tx Power
     Num Of Supported Power Levels ............. 8
     Tx Power Level 1 .......................... 20 dBm
     Tx Power Level 2 .......................... 17 dBm
     Tx Power Level 3 .......................... 14 dBm
     Tx Power Level 4 .......................... 11 dBm
     Tx Power Level 5 .......................... 8 dBm
     Tx Power Level 6 .......................... 5 dBm
     Tx Power Level 7 .......................... 2 dBm
     Tx Power Level 8 .......................... -1 dBm
     Tx Power Configuration .................... AUTOMATIC
--More or (q)uit current module or <ctrl-z> to abort
     Current Tx Power Level .................... 1
   Phy DSSS parameters
     Configuration ............................. AUTOMATIC
     Current Channel ........................... 1
     Extension Channel ......................... NONE
     Channel Width.............................. 20 Mhz
     Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
     Current CCA Mode .......................... 0
     ED Threshold .............................. -50
     Antenna Type............................... INTERNAL_ANTENNA
     Internal Antenna Gain (in .5 dBi units).... 8
     Diversity.................................. DIVERSITY_ENABLED
   Performance Profile Parameters
     Configuration ............................. AUTOMATIC
     Interference threshold..................... 10 %
     Noise threshold............................ -70 dBm
     RF utilization threshold................... 80 %
     Data-rate threshold........................ 1000000 bps
     Client threshold........................... 12 clients
     Coverage SNR threshold..................... 12 dB
     Coverage exception level................... 25 %
--More or (q)uit current module or <ctrl-z> to abort
     Client minimum exception level............. 3 clients
   Rogue Containment Information
   Containment Count............................ 0
   CleanAir Management Information
       CleanAir Capable......................... No
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
      Native ID :..................................... 22
      WLAN 2 :........................................ 21
      WLAN 4 :........................................ 25
      WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
Attributes for Slot 1
   Radio Type................................... RADIO_TYPE_80211a
   Radio Subband................................ RADIO_SUBBAND_ALL
   Administrative State ........................ ADMIN_ENABLED
   Operation State ............................. UP
   Radio Role .................................. ACCESS
   CellId ...................................... 0
   Station Configuration
     Configuration ............................. AUTOMATIC
     Number Of WLANs ........................... 3
     Medium Occupancy Limit .................... 100
     CFP Period ................................ 4
     CFP MaxDuration ........................... 60
     BSSID ..................................... 00:22:55:a5:0c:30
     Operation Rate Set
       6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
       9000 Kilo Bits........................... SUPPORTED
       12000 Kilo Bits.......................... MANDATORY
       18000 Kilo Bits.......................... SUPPORTED
       24000 Kilo Bits.......................... MANDATORY
       36000 Kilo Bits.......................... SUPPORTED
       48000 Kilo Bits.......................... SUPPORTED
       54000 Kilo Bits.......................... SUPPORTED
     Beacon Period ............................. 100
     Fragmentation Threshold ................... 2346
     Multi Domain Capability Implemented ....... TRUE
     Multi Domain Capability Enabled ........... TRUE
     Country String ............................ US
   Multi Domain Capability
     Configuration ............................. AUTOMATIC
     First Chan Num ............................ 36
     Number Of Channels ........................ 20
   MAC Operation Parameters
     Configuration ............................. AUTOMATIC
     Fragmentation Threshold ................... 2346
     Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
   Tx Power
     Num Of Supported Power Levels ............. 7
     Tx Power Level 1 .......................... 15 dBm
    Tx Power Level 2 .......................... 14 dBm
     Tx Power Level 3 .......................... 11 dBm
     Tx Power Level 4 .......................... 8 dBm
     Tx Power Level 5 .......................... 5 dBm
     Tx Power Level 6 .......................... 2 dBm
     Tx Power Level 7 .......................... -1 dBm
     Tx Power Configuration .................... AUTOMATIC
     Current Tx Power Level .................... 1
   Phy OFDM parameters
     Configuration ............................. AUTOMATIC
     Current Channel ........................... 36
     Extension Channel ......................... NONE
     Channel Width.............................. 20 Mhz
     Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
       ......................................... 104,108,112,116,132,136,140,
       ......................................... 149,153,157,161
     TI Threshold .............................. -50
     Antenna Type............................... INTERNAL_ANTENNA
     Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
     Diversity.................................. DIVERSITY_ENABLED
   Performance Profile Parameters
      Configuration ............................. AUTOMATIC
     Interference threshold..................... 10 %
     Noise threshold............................ -70 dBm
     RF utilization threshold................... 80 %
     Data-rate threshold........................ 1000000 bps
     Client threshold........................... 12 clients
     Coverage SNR threshold..................... 16 dB
     Coverage exception level................... 25 %
     Client minimum exception level............. 3 clients
   Rogue Containment Information
   Containment Count............................ 0
   CleanAir Management Information
       CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 5
Cisco AP Name.................................... KN1252_AP01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:ef:06:50
IP Address Configuration......................... DHCP
IP Address....................................... 10.125.18.101
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 10.125.18.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ Knowlogy Conference Rooms Side
Cisco AP Group Name.............................. OGR
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.4.10.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Medium Power (15.4 W)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
AP Image......................................... C1250-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX122990L5
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
      Native ID :..................................... 118
      WLAN 1 :........................................ 111
      WLAN 2 :........................................ 111
      WLAN 4 :........................................ 112
      WLAN 6 :........................................ 112
      WLAN 7 :........................................ 111
      WLAN 9 :........................................ 112
      WLAN 8 :........................................ 112
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 26 days, 00 h 24 m 39 s
--More or (q)uit current module or <ctrl-z> to abort
AP LWAPP Up Time................................. 26 days, 00 h 23 m 48 s
Join Date and Time............................... Wed Oct 9 10:59:07 2013
Join Taken Time.................................. 0 days, 00 h 00 m 50 s
Attributes for Slot 0
   Radio Type................................... RADIO_TYPE_80211n-2.4
   Administrative State ........................ ADMIN_ENABLED
   Operation State ............................. UP
   Radio Role .................................. ACCESS
   CellId ...................................... 0
   Station Configuration
     Configuration ............................. AUTOMATIC
     Number Of WLANs ........................... 7
     Medium Occupancy Limit .................... 100
     CFP Period ................................ 4
     CFP MaxDuration ........................... 60
     BSSID ..................................... 00:22:55:df:a5:90
     Operation Rate Set
       1000 Kilo Bits........................... MANDATORY
       2000 Kilo Bits........................... MANDATORY
       5500 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
       11000 Kilo Bits.......................... MANDATORY
     MCS Set
       MCS 0.................................... SUPPORTED
       MCS 1.................................... SUPPORTED
       MCS 2.................................... SUPPORTED
       MCS 3.................................... SUPPORTED
       MCS 4.................................... SUPPORTED
       MCS 5.................................... SUPPORTED
       MCS 6.................................... SUPPORTED
       MCS 7.................................... SUPPORTED
       MCS 8.................................... SUPPORTED
        MCS 9.................................... SUPPORTED
       MCS 10................................... SUPPORTED
       MCS 11................................... SUPPORTED
       MCS 12................................... SUPPORTED
       MCS 13................................... SUPPORTED
       MCS 14................................... SUPPORTED
       MCS 15................................... SUPPORTED
     Beacon Period ............................. 100
     Fragmentation Threshold ................... 2346
     Multi Domain Capability Implemented ....... TRUE
     Multi Domain Capability Enabled ........... TRUE
     Country String ............................ US
--More or (q)uit current module or <ctrl-z> to abort
   Multi Domain Capability
     Configuration ............................. AUTOMATIC
     First Chan Num ............................ 1
     Number Of Channels ........................ 11
   MAC Operation Parameters
     Configuration ............................. AUTOMATIC
     Fragmentation Threshold ................... 2346
     Packet Retry Limit ........................ 64
   Tx Power
     Num Of Supported Power Levels ............. 8
     Tx Power Level 1 .......................... 20 dBm
     Tx Power Level 2 .......................... 17 dBm
     Tx Power Level 3 .......................... 14 dBm
     Tx Power Level 4 ..........

Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App

Ability to process several raw files with the same content but with different exposure into the single picture

Can you add to the Lightroom an ability to process several raw files with the same content but with different exposure into the single picture?
Base raw files can be given with exposure bracketing during shooting, for example.
The goal - to get maximum details in darks and lights (if we use the "ligths recovery" or "fill lights" we lose the quality because raw file just have no all required information).
The similar (but not the same, only the idea) thing - is High Dynamic Range Photography in Adobe Photoshop
Thank you

The plugin LR/Enfuse does this already. And of course Photomatix have a plugin available for Lightroom. This essentially amounts to pixel editing, which is beyond the range of Lightroom's metadata editing.

HT1473 Often times when I copy a CD into my library it breaks the CD into more than one Album, all with the same name but with only a few of the songs on each. This happens whenever the CD has music with more than one artists...like maybe duets.

Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
Usually this is because there might be songs where the artists has other artists in the song.
How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

The sound doesn't work. It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored and still no

It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored the device and still no sound.

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

After a successful home button repair, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

After a successful home button repair on my iPhone 4, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

I guess your definition of a "successful repair" is different from most people's.
If you got it serviced by Apple, take it back to them.
If you had it serviced by a 3rd party, Apple won't touch it. Take it back to whoeever fixed it for you.

No sound from the speaker and missing speaker device listed with Window 7

I have Window 7 and with SB X-Fi card installed for a long time now but yesterday, there is no sound from the speaker which connected to the normal speaker output of the card. I check the output device and the specker device is missing. I tried to run the software but it says no device.
How do I correct the problem?
Thank you.

Take it to your local Apple Store along with US$149 for a replacement.

Hi Guys, My iPhone is stuck in a mode where it thinks the headset is still plugged in. I cant get any sounds through the speaker. Cant hear sms or emails arrive. If the phone rings i hear it but pple cant hear me or i cant hear them. The phone works f

Hi Guys,
My iPhone is stuck in a mode where it thinks the headset is still plugged in.
I cant get any sounds through the speaker. Cant hear sms or emails arrive. If the phone rings i hear it but pple cant hear me or i cant hear them.
The phone works fine with the headphones plugged in.
I have tried all the usual solutions, inserted and removed the headset (at least 50 times)
Soft reboot
full restore
Nothing seems to work. I have searched on this and it seems to be a well know issue but there doesnt seem to be any firm solutions that i can find to fix the problem

If no change after inserting and removing the headset at least 50 times, powering the iPhone off and on, an iPhone reset, and restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem.
Make an appointment at an Apple Store if there is one nearby.

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

Help tells me that i am up to date with the latest version BUT the firefox start link tells me i am NOT on the latest version. what is going on?

help tells me that i am up to date with the latest version BUT the http://www.google.co.uk/firefox?client=firefox-a&rls=org.mozilla:en-GB:official link tells me i am NOT on the latest version. what is going on?.
also:
please can sync also copy my addons too?

Firefox is a web browser not a homepage.
It sounds like you you have the old www.google.com/firefox/ start page that used to be the default homepage in Firefox before Firefox 4.0 sometime. It is not being maintained by Google anymore so either ignore the message or while in Firefox go to Tools->Options->General->Homepage section and change your homepage.

When I play games I can't hear sound on the speaker but the music works on speaker

On my iPad when i play games I can't hear the sound on the speaker but the music in videos play with the sound on speaker the only time I hear the sound on the pad while playing games on the pad is headphones why is that?

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

HT201328 after clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?

After clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?

Hi Tonma,
Sounds like your device is in recovery mode. Follow the instructions in this article:
http://support.apple.com/kb/ht1808
Cheers,
GB

Sound from the speaker iPhone 4S 5.1.1. disappeared!?

About one hour ago I lost the sound from the speaker iPhone 4S 5.1.1. Lost in the middle of a conversation with a friend whom I put on speakerfon, first started to choking and after that sound is disappeared, and than appears in the fraction of a second and after is completely gone. On two occasions it choking when I put some videos and that's all. There is no sound even when someone call me, only vibrates. Note that phone was never dropped, as a new one, and I got it from July last year. Headphones works normaly. Any help without service?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
More Info Here > http://support.apple.com/kb/TS2802

When i conect my iphone to the pc ithunes say to me to put the password off ,but with the problem of my screen i can't do it. What can i do?

When i conect my iphone to the pc ithunes say to me to put the password off ,but with the problem of my screen i can't do it. What can i do?

You need to explain a little better what is wrong here. Sounds like maybe a broken screen and you are trying to do something with the phone?

Adobe Creative Cloud - Photoshop CC / Photoshop CC (2014) i had first install Photoshop CC with some actualizations , I have install now Photoshop CC (2014) without desinstalling Photoshop CC... I would like stay only with the 2014 version but i don´t fin

Adobe Creative Cloud - Photoshop CC / Photoshop CC (2014) i had first install Photoshop CC with some actualizations , I have install now Photoshop CC (2014) without desinstalling Photoshop CC... I would like stay only with the 2014 version but i don´t find more the desinstaller of old CC version and the 2 versions takes a lopt of space on my disk... is it normal or is there a necessity to stay with the 2 versions... Now I use only the 2014 version but the old version is always there ????

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

SoundBlaster 5.1 no surround sound with the speaker test, but with movies

Similar Messages

Maybe you are looking for