Soundtrack Pro clips to final cut

I have a number of sound clips that were recorded and edited in Soundtrack Pro 3.0 that I now need to export to Final Cut. I know I have done this in the past, I thought I just used Export to WAVE files. However, it is not working this time.
I don't see any info on this in the manual - everything is about bringing Final Cut files into Soundtrack and not the other way around.

Export to AIFF at 48kHz 16 Bit.

Similar Messages

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

Hello, Please Help! When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync. Please Help!!!

Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
Edgil

Make sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck

TS2510 I can't send to soundtrack pro 3 from Final Cut pro 7??

I can't send to soundtrack pro 3 from Final Cut pro 7??
When i try to Open a file soundtrack pro locks up. Why??

Final Cut Pro and FCS3 are not supported on PPC computers.
x

Trouble with the round trip from Soundtrack Pro 2 to Final Cut Pro

I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
Thank you in advance.

Make sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck

Trouble with Round trip between Soundtrack Pro 2 and Final Cut Pro 6

I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
Thank you in advance.

Thanks.
What's I've been doing is exporting the Soundtrack files as AIFF files, then importing them into Final Cut...
It's working... at least well enough. Still seems harder then just being able to go back and forth between the two applications.
Thanks for the advice.

Soundtrack Pro compatible with Final Cut Express?

I have Final Cut Express 4 installed and installed Logic Studio. Soundtrack Pro and Compressor did not install. Are these programs not compatible with FC Express?

From the Apogee website:
"Duet features two superb microphone inputs, each with phantom power and up to 75dB of gain. With Duet, you can record a pristine vocal track while playing your guitar or keyboard, stereo mic your acoustic or even capture a live concert."
http://www.apogeedigital.com/products/duet.php
It's ideal target audience would be laptop users in need of a high-quality, but very portable audio interface for Logic.
Message was edited by: lwilliam

Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

First: How are you exporting? Are you using the Share feature or Send to Compressor?
Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
Russ

Colour won't recognise my clips from Final Cut?? PLEASE HELP!!

I have imported a single track of clips into Colour. The clips comprised of three different source films;
- One of the films has gone in fine.
- One of the films is apparently 'offline' and I can't understand why, as it is still online in Finalcut.
- One of the films, and this is the very weird bit... has selected entirely different footage from elsewhere in the source clip. The clips in Final Cut show certain footage, where as the SAME CLIPS in Colour show something different. This is mind boggling.
If anyone can offer any advice it'd be very much appreciated, I have to finish the project (a showreel) a.s.a.p and its killing me!
Thanks again, Ricky.

Not really a answer but a solution would be to do the following -
1. Export your sequence as a baked down QT (Apple Pro Res or Uncompressed if your system can handle it)
2. Re-Import the export to FCP and make "y" on your keyboard "add-edit"
3. Place the exported clip over your original sequence in a new vid layer and go through and put the cuts back into the exported clip by hitting the down arrow and then pressing Y - with a bit of practice you can fly through a sequence using this method.
4. Copy and paste the exported film with the cuts back in into a new sequence making sure the sequence settings match the clip codec.
5. Send to Color the normal way.
Hope this helps
JB

Is there any other way to buy pro apps like logic pro x or final cut pro x without downloading straight from the internet?

Hi,
Just straigt to the issue, I'm not really sure with my internet connection in my country. I mean its so slow and sometimes it disconnects and reconnect. So I'm not trusting the internet connection here to download such a big software like Logic Pro x or Final Cut Pro x. So is there any way for me to buy the pro apps without downloading straight from the internet? I mean like the oldschool method, come with a box. I bought Logic pro 7 and 8 like that and has no problem with it. But now apple selling all the pro apps from the app store, its cool and easy but im afraid if i bought it online and im pretty sure i will encounter problems during the download period. It might took me like a week or more maybe to download 40GB file, i dont know. And more over, what if my internet connection cut off while i download the software?
So please do help me with this. I would love to have Logic Pro X on my apple computer.
Thanks.

ahavu wrote:
And to my knowledge I can't sort of 'drag and drop' the clips from the sealed Final Cut event files either.
The events are not "sealed". Your clips – if you copied rather than leaving in place – are in the Original Media folder. If you used 10.1.x, you right click on the library bundle and choose Show Package Contents. In early versions, just open the event folder.
There are multiple ways to get media on ones' computer. One way is to use a card reader and copy the entire card structure to whatever destination is used for a media drive. Then import into the NLE.
I don't have any experience with Hitfilm but I assume their user forums would be a good place to get an understanding of what workflows work best for that application.
Good luck.
Russ

Importing final cut pro 7 to final cut X using XML

OK so I just read Apple's new FAQ and it says support for XML is forthcoming. Couldn't someone enterprising individual just write an app which transforms FCXML from FCP 7 to FCP X XML. There could be some data loss, but better than nothing..

the black sun wrote:
But they have said they will not be supporting import of FCP 7 projects. Sad but true.
Factually incorrect. Sad but true.
Tell me what is factually incorrect? There is absolutely no mention or commitment to providing any sort of tool to bring in final cut pro 7 projects in any shape or form. They could have said "a limited import tool is being worked on, but will only support a limited feature set, and data loss/changes to your project may occur." But they didn't. Here's the exact quote from Apple's FAQ (emphasis added):
Can I import projects from Final Cut Pro 7 into Final Cut Pro X?
Final Cut Pro X includes an all-new project architecture structured around a trackless timeline and connected clips. In addition, Final Cut Pro X features new and redesigned audio effects, video effects, and color grading tools. Because of these changes, there is no way to “translate” or bring in old projects without changing or losing data. But if you’re already working with Final Cut Pro 7, you can continue to do so after installing Final Cut Pro X, and Final Cut Pro 7 will work with Mac OS X Lion. You can also import your media files from previous versions into Final Cut Pro X.

After transferring clips to Final Cut, they do not show up in the events library. They show up in the timeline of my project, though. how can I see then in the events browser?

After importing clips to Final Cut, they do not show up in the events library. Events from 2014 show up, but not 2015.They show up in the timeline of my project, though. How can I see them in the events browser?

TThose aren't bins. Those are just groupings based on when the content was created or any other selected parameter. Use the action popup in the toolbar tho change the setting.

Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?

Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?

Apple's web page has the requirements:
http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade.

Final cut pro 7 and final cut pro x

Is it wise to move from final cut pro 7 to final cut pro x for me who is already using fcp7 with no problems?

I think you should at least download the free FCPX trial and try it, for sure. I've edited in FCP since it came out and when I really tried earnestly to learn X, after a week or two, I was really impressed. The reasons are numerous, but one of the big improvements is speed. FCPX is very fast at handling video, all kinds.
If you know FCP7 well, then you will already understand the importance of many aspects that apply to any HD NLE, such as drive speed, sufficient drive space, (external w/fast language, Thunderbolt, USB3 or at least FW800) etc., but also there will be a kind of learning curve to the different way FCPX organizes, maybe more of a learning wall. But it's too much to lay on you in this reply - suffice to say I think you will love X. Especially if you really stop to learn it. It really is nice, and often receives completely unfair criticism.

How can I overlap two clips in final cut

I am shooting a music video and I want the actor to appear in two spots in the same shot. I shot some test footage today and I set the camera in one spot for both shots. Shot 1 I told him to stand on the right side of the frame for awhile, cut it and then took another shot with him on the left side of the frame. How can I now overlap the two clips in final cut so that i see him on both the right and left sides of the frame at the same time. Thank you so much in advance!!!!

I apologize if I didn't originally understand your question. It sounded like you had recorded two scenes with the same camera set in the same place for each scene; one scene with the talent on the left and the other scene with the talent on the right. And now you wanted to show both shots at the same time so that the talent will be seen on both sides of the screen. To do that, follow my original instructions above.
But if I did misunderstand, please rephrase what it is you're trying to do.
Thanks,
-DH

Soundtrack Pro clips to final cut

Similar Messages

Maybe you are looking for