SOURCE SYSTEM CREATION IS NOT WORKING

Hi,
I have installed ECC 5.0 in my laptop, I am getting error while creating SOURCE SYSTEM. The error I am getting is :
<b>"No entry for BR_USER in table RSADMIN available"</b>
Pls help me to create a source system in BW.....
Thanks in Advance.
Sunil K Shetty

Hi
r/3 bw connectivity check these links and sap best practice for bw connectivity
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Re: BW-R/3 Connectivity
Not able to create R/3 source system in BW
How to Create an R/3 source system and load data from there

Similar Messages

Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

RSAR238 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Kindly help me with this error.
Thanks and regards,
Dhanapal

Hi,
Check the same in SDN..
Object ZDUMMY could not be activatedMessage no. R7I028
Re: DSO Activation problem
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
Thanks
Reddy

Source system creation

hi experts,
this is the first time i am creating source system
i am have requirement to load data one bw system to another bi system,
so, to do that i defined and created logical system in bw for bi system and
i created same for bw in bi system also and everything is ok.
i guess my next step is to create source system(my self) for bw in bi .
when i am trying to create it is showing that it is already exists.and here what type of source system i need to choose. i am not founding any my self bw data mart
status symbol under source system creation node and what type of the source system i need to choose and whether it is manually or automatically.if i choose automatically it is asking create new destination ,create back ground user and connection of source system to bw (it is asking to fill all fields),for manual system creation only logical system and rfc destination. is it required to creat source system or not because my self bw data mart symbol is present in bw system and bi system also.please correct me if anything wrong
thanks
venu

hi chandra shekhar &chitrat,
thanks for your quick reply,when i choose sap business information symbol
it is asking to fill all the entries like crate new destination under this i provided
target computer in this i provided ip address of bi system( i am creating in bw system),system id & system number,and back groung user in source system and
password ,connection to the source system ,target system for back ground user
and connection to the source system what i need to provide
thanks
venu

R/3 Source system creation

Hello,
I wish to add an R/3 system to my BI 7.0 system. What exactly do I need to enter in the "Create SAP Source System" window? Should I leave backgrounduser as ALEREMOTE? I dont see any option of automatic source system creation. Could u pls help me with a step by step solution.
Thanks. POINTS WILL BE GIVEN.
SD

Hi
Defining the source system
As of release 640, you can use upper and lower case characters for R/3 user passwords. This is only uppercase characters for previous releases. Remember that your passwords are automatically converted to uppercase in previous Basis releases.
As BI 7.0 System has Basis 700 below, upper and lower case passwords are important.
So, for defining source system is almost same as ordinary BW Source System definitions.
One more important thing is that you have to take into account the EDI Ports. This may cancel your system definition if the <spsettings are not correct. This settings must be controlled on both BI and Source System.</p>
Here are the steps to configure Source System with Basis Relase lower than 640 in BI 70:
1. Take a look at table EDIPORT of your BW system and note the next free number for the field "Port". This is the adjacent number of the highest entry like 'A0000000123' for example. In this case e.g. take '124'.
2. Choose transaction "snum" and object "ediport".
Select "number ranges" from the menu "Goto" and here the button "status".
Change the CURRENT NUMBER of the ranges to the next free number you noted from table EDIPORT.
If the number range of your BW system is correct please check the same in your OLTP system.
3. Call TCODE RSA1 on BI System in BI Client.
4. Select Source Systems on Left Menu
5. Left Click SAP System and Choose Create
6. Important think is, as source system has Basis Release Lower than 640, You have to give All Passwords (For BI ALEREMOTE User and for Source System ALEREMOTE User) in UPPERCASE.
My Favourite is giving RFCCPIC for ALEREMOTE Passwords.
7. It Must Be OK.
Assign points if it helps
Regards,
Sumit

Transports while importing DS error "Source system QAS does not exit "

Hi Experts,
      For a specific reason we are importing a DS from quality to development.While importing DS in Development side we are getting an error " Source system QAS does not exist".Error message as below:
   Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
   Source system QAS does not exist
   Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
   There is no DataSource with these attributes
   Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
   Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
   Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
   Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
   Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
   Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
   Post-import methods of change/transport request CXCK900023 completed
        Start of subsequent processing ... 20090306024549
        End of subsequent processing... 20090306024550
   Execute reports for change/transport request: CXCK900023
   Reports for change/transport request CXCK900023 have been executed
        Start of................ 20090306024550
        End of.................. 20090306024550
   Execution of programs after import (XPRA)
   End date and time : 20090306024550
   Ended with return code: ===> 8 <===
Our system sap bi is not new system, we are using from long time.Transports are working while moving dev to quality and quality to prod.
Can any body suggest on this.
Regards
Vinod

Hi vinod kumar,
i hope you need to map source system From QAS to DEV system,
genereally from DEV to QAS configuration will be there, but here request is moving from QAS to DEV so i think this should be configured.
RSA1-> Tools -> conversion of logical system names -> maintain original system and target system name for both BI and ECC systems.
Regards
Daya Sagar

Source system ECQCLNT320 does not exist in BI Production

Hi,
When i am transporting the BI objects along with the datasources it is giving the following error.
our system Landscape:
BI Dev. & BI Qty Same Box
ECC Dev.
ECC Qty
ECC Prd.
in our landscape BI dev and BI Quality are the same Box, i am transporting BI cube objects along with ECC quality system datasources from BI dev. system. But when we import the cube request the following error is occuring.
Please help me as i am in typical stage.
ERROR: Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Source system ECQCLNT320 does not exist
Can we transport the ECQ datasources from BI dev system where i am using them.
Thanks,
Baswa

Hi,
RC on ECQCLNT320 check the source connection under sourcesystem tab in Rsa1,it might having issue else
Check in the RSA6 (Sourcesystem) wether DataSource is active mode or not ,
Go to Tcode RSDS for Replication of DataSource in BW system .
Regards,
Satya

HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.

If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Source System creation in BI 7.0 for SQL Server using DB Connect

Hi
My requirement is to extract data from SQL Server 2005 to BI 7.0 using DB Connect.
I need to create a SOURCE SYSTEM for that purpose,As i am new to BW i don't know how to start to create a SOURCE SYSTEM.
What are the parameters i require either from Basis team to install or for DB team User ID in SQL (What type of user).
Questions:
1) create a db user with authorization to read this views.......as i created views on tables...do i need authorisation to read table or views
"On BW Server side (If BW server isn't based on SQL Server):
(1) Install SQL Server client and test connection to SQL Server DB.
(2) Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel)"
How can i know on which server our BW System is Based and HOW Install SQL Server client and test connection to SQL Server DB and
Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel
and
how to create Source System to SQL Server on BW
Please update me in details i this is my first Source System Creation in BW
Thanks in advance

go through the link this may be helpful http://msdn.microsoft.com/en-us/library/dd299430.aspx

System.out.println not working in Tomcat-4.1.x

System.out.println not working in Tomcat-4.1.24. Any settings has to be enabled??? I am using tomcat for Solaris

I think u can use ServletContext.log() to output info instased.

Source system BW100 does not exist

Hi Guru's
I'm trying to transport the datamart infopack from dev to QA and it's failed due to "Source system BD1_100 does not exist; InfoPackage ZPAK_DVDXOWDKOMSF5YW6F4EDXMXL1 deleted".
I've tried to trnasport datamart as well but still failed what could be the problem?
Regards,
Ramana.

Hi Raman
It simple. If you want load data from QAS to QAS then you need take conversion when transport request importing to QAS. So you need record BWDEV ---> BWQAS in "Transport connection".
IF you want load data from BWDEV to BWQAS then you need BWDEV as source system in QAS and no record in "Transport connection".
http://help.sap.com/saphelp_nw04/helpdata/EN/80/1a616be07211d2acb80000e829fbfe/content.htm

Systems preferences does not work

My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding.... Help.....

Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
Any help would be greatly appreciated!
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.8) 23" Cinema Display and 8 gig on G5 Dual
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.7) 23" Cinema Display and 8 gig on G5 Dual

System restore is not working

System restore is not working for my Itouch. I am getting a picture of a white cord and and arrow pointing to Itunes logo... any suggestions?

It sounds like there is definitely a system problem. The whole OS seems to be messed up.
Do you have an MS Windows 7 disk?
In such case you could start the Windows 7 Startup Repair process using the MS Win 7 disk.
Boot from Win 7 disk, after the temporal files has been load, you should get and window where you could choose between the OS installation and other options. The second option called Repair you Computer is the one which would be needed to get the system repaired.
Then wait for System Recovery Options to locate Windows 7 on the HDD.
Then choose the Windows 7 installation and then the next window should appear providing the option to repair the system Startup Repair
But in case this workaround would not help you, the system should be reinstalled once again using Toshiba Recovery disk

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

SOURCE SYSTEM CREATION IS NOT WORKING

Similar Messages

Maybe you are looking for