Source System not collected with business content Activation

I'm trying to activate some business content and have previously assign the source system (R/3). When I'm selecting an infosource and select as grouping in data flow before the source system is not collected.
This is a new BW 3.5 connected to a ECC. It has to be silly but I don't know what else to check. I was surprise to see that the source system was created with the icon of a BW system. But I think that this is just because the ECC appart of being an R/3 system is also a BW instance.
Well, any help appreciated and kindly rewarded.
Thanks,
Alberto Sabate

Thanks but,
I have tryed multiple times activating my infosources selecting only one source system, all of the available or none at all. No matter what I do the system collects only the Infosource with the communication structure but does not go down to the transfer rules and assignment of the available datasource.
I don't know what to do now. I'm obviously selecting the grouping with "in data flow before".
I'm running out of ideas.
Thanks all,
Alberto Sabate

Similar Messages

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

ALE Change Pointers in source system not active

Hi All,
I am trying to load 0COSTELMNT using deltas. The initial load is OK and then i use a delta and it fails and i get the error:
"ALE Change Pointers in source system not active"
I have carried out the following steps in an attempt to resolve the problem - but it didnt. Anyone have any advice??
(1) Checked BD61 to confirm whether the change pointers are active
(2) Checked BDCP to confirm the number range is maintained
(3) Checked SALE (Activate change pointers for message types) to confirm whether the change pointer has been activated for the type we need:
COCOKA Control segment CO object/cost element
COELEM Cost element master data
(4) In transaction snum, Selected number ranges and confirmed the intervals are setup
No. 01
FROM: 0000000001
TO: 0000009999
(5) Activate transfer structure
(6) Replicate Datasources
Thanks,

If you are transferring master data from source system, the BD61 setting on the source system should be checked.
Why it has been unchecked - not sure (likely someone did it by mistake).
It shouldn't have any effect on txnl delta. What will be effected though is that you will have lost delta of the ALE based data sources for the period this setting was unchecked.

Business content activation in a fresh implementation

Dear Gurus
Before i begin let me state that i did check and did get information about activation...my concern is that i am new to implementation and i want to know exactly what are the steps that need to be followed at R3 end and in BI when we imlpement a fresh system as far as business content is concerned.As of now the functional team is setting up the R3 system...appreciate your inputs on this in detail....

Step 1: Define Logical System in R/3
Step 2: Assigning Logical System to Client
Step 3: Setting Up an RFC Destination
Step 4: Distributing Data Model
Message Types Involved in Process of Data Loading
Step 5: Generating Partner Profile
Step 6: Maintaining Message types in T-Code WE20
Communication Setting between BW and R/3:
Creating Source System (SALE): This step creates source systems which are to be connected.
1.
Assigning Source System to Client (SALE): This step gives a logical name to a SAP Client from which the communication is to be established.
2.
Setting up RFC Destination (SM59): This step is required to establish remote connection to the partner with which Source system is trying to communicate. Here one has to maintain the logon and IP details of the target system.
3.
Distributing Data Model (BD64): A distribution model is used to model a distributed environment in which you specify messages exchanged between sending and receiving systems. Here one has to define the message protocols with which the two systems will communicate.
4.
Generating Partner Profile (BD82): This process generates a partner profile for each system with which your system communicates. Outbound records are created in the partner profile for each outgoing message, and inbound records are created for each incoming message.
Note: If one distributes Data Model before generating partner profile then one has to redefine partner profile in other system also (repeat step in both system). In this document we are generating partner profile after Distribution of data model so as to demonstrate how to maintain inbound and outbound message types in WE20.
5.
Maintaining Message Types (WE20): This process is optional. Generally while generating partner profiles we automatically get the respective Outbound and Inbound messages, which can be checked in T-Code WE20. If the message types are not defined then one can manually do it by following this process.
Regards,
Suman

Business Content Activation - run time error

Hi guys,
We were at plugin 2002.1. We installed PI 2002.2 and PI 2003.1 on top of it.
After the plug-in upgrade, we are at support pack 9 for SAP-BW and 13 for BI-Content. For aba and basis, we are at 620 and support pack 32.
As part of the regression testing after the 2003.1 plugin upgrade, we found out that the business content activation abends with the following run time error.
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Looks like it is trying to insert into table RSOLTPSOURCEFIET and the row already is existing. I thought the activation process is supposed to update something if it is already out there.
If we just select the 'only necessary', the activation goes through ok, but if we select 'before and after in the data flow', we get this abend.
Any clues???
Best regards,
makaleem

Hi Seow,
This is how I resolved it. I looked at the ST22 closely and one of the messages indicated that the number range is missing in tran SNRO for an infoObject. I created an entry for that infoobject using SNRO and tried activation and it worked.
When we created an OSS for SAP to look into it, they recommended the following two things. I tried these two but it did not work. I am mentioning them below just in case they may help you.
1) Sometimes there is inconsistency in the content cache when trying to activate objects and we have to delete the repository cache. To delete the repository cache, go to RSA1 ---> Business Content -
> Extras ---> Delete Rep Cache
2) Execute SAP_DROP_TMPTABLES program for types 1,2,3 and 6.
If this helps, don't forget to assign points.
Abdul

BW 3.5 SP13 with Business Content 3.53 SP4

Hi experts!
I have a BW system with the following configuration: BW 3.5 SP13 with Business Content 3.53 SP4.
To install the xApp Analytics 1.1, I need at least the following configuration: BW 3.5 SP14 Business Content 3.5.3 SP6
Which features I will lose if i decide to install xApp Analytics 1.1 in the BW I have? Am I going to lose queries, cubes and etc that come bundled within the xApp Analytics 1.1 Business Packages?
Thanks a lot.

Thanks Stratos...
for reference...
SAP GUI
    u2022   SAP 640 GUI, patch level 25
    u2022   SAP 710 GUI patch level 6
    u2022   SAP Java Connector 2.1.8
SAP Servers
   u2022    SAP BW 3.5, BASIS level 20, ABA level 20, BW level 20
   u2022    SAP R/3 4.6c, BASIS level 41, ABA level 41
   u2022    SAP R/3 4.7, BASIS level 41, ABA level 41
   u2022    SAP NetWeaver BI 7.0, BASIS level 14, ABA level 14, BW level 14
   u2022    SAP NetWeaver BI 7.02, BASIS level 0, ABA level 0, BW level 0
   u2022    mySAP ERP 2004, BASIS level 19, ABA level 19, BW 3.5 level 19
   u2022    mySAP ERP 2005, BASIS level 14, ABA level 14, BI7 level 14
   u2022    SAP Enterprise Portal 6 SP19
   u2022    SAP Enterprise Portal 7 SP10
SAP servers required to have at least the above patch levels.
Note: The following correction notes should be applied to your SAP BW / SAP Netweaver BI system: 1125433, 1161911, 1162349, 1162416, 1170323, 1230303 and 1007048.
OSS Correction Note 1007048 requires a manual configuration step.
Thanks
Sathya

Create a site collection with dedicated content db with the help of server object model

Hi,
I have a requirement to implement a create a new site collection with dedicated content db. i have got 2 PowerShell scripts which does the same. first i will create a content db and then create the sitecollection with contentdb
parameter with the created contentdb name.
Now the site collection created must contain few doc libs and few splists with look up columns, people picker data type, multiline of text, single line of text,choice field. hence i am thinking the below approach:
1) create a web template and include sp doclibs, splists , site columns in this.
2) i am thinking of a ui design to create the below:
These are called "projects" which is actually the site collection with the doclibs, splists and must be created by sharepoint admin on click of a link in my landing page.end users access these "projects" aka
"site collections" and uploads the documents into these projects and collaborate.
so my question is : On click of a button can I create a site collection with a dedicated content db based on the web template created with the hel of server object model?
The other approach is on click of this button call the power shell script which accepts the sitecollection name and contentdb name as parameter. is this possible in server obj.model ?
passing a paramter from code behind- visual web part ui to power shell ?
and it should create the site collec based on the web template and create the content db.
my doubt #3 : will it not throw error "request timed out" when creating the site collec and contentdb from ui ?

Try below:
http://sharepoint.stackexchange.com/questions/21606/programmatically-create-a-site-collection-in-an-existing-mounted-content-databa
PowerShell is just a wrapper for the object model. You shouldn't need to reference PowerShell in your feature, just create the new site collection with C# inside your feature. There's a blog post here that illustrates some code that may get you started.
http://blog.mastykarz.nl/programmatically-creating-sites-site-collections-custom-web-template/
http://blogs.msdn.com/b/vesku/archive/2014/06/09/provisioning-site-collections-using-sp-app-model-in-on-premises-with-just-csom.aspx
# Enable the remote site collection creation for on-prem in web application level
# If this is not done, unknon object exception is raised by the CSOM code
$WebApplicationUrl = http://dev.contoso.com
$snapin = Get-PSSnapin | Where-Object {$_.Name -eq 'Microsoft.SharePoint.Powershell'}
if ($snapin -eq $null)
Write-Host "Loading SharePoint Powershell Snapin"
Add-PSSnapin "Microsoft.SharePoint.Powershell"
$webapp=Get-SPWebApplication $WebApplicationUrl
$newProxyLibrary = New-Object "Microsoft.SharePoint.Administration.SPClientCallableProxyLibrary"
$newProxyLibrary.AssemblyName = "Microsoft.Online.SharePoint.Dedicated.TenantAdmin.ServerStub, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
$newProxyLibrary.SupportAppAuthentication = $true
$webapp.ClientCallableSettings.ProxyLibraries.Add($newProxyLibrary)
$webapp.Update()
Write-Host "Successfully added TenantAdmin ServerStub to ClientCallableProxyLibrary."
# Reset the memory of the web application
Write-Host "IISReset..."
Restart-Service W3SVC,WAS -force
Write-Host "IISReset complete."
If this helped you resolve your issue, please mark it Answered

Source system not available error

If the error message is teling as source system not available
so what can be the reasons for that and tell me the solution also.
data cllection is incorrect
so what can i do i have checked trfc connections every thing but every thing is fine
so any body help me out in this.
your suggstions will be rewarded.
Regards.
Vikram.

Hi Vikram,
Try the below mentioned steps:
1. Check the connections on BW sysetem and R/3 system.
Use the tcodes: sm58 and sm59. On the context menu of the source system created, check the option for conections. If connections are not fine, contact the basis team
2. Go to 'source systems' select you source system and right click and select 'Repicate Data Sources' , then try replicating the the infosource for that
appilication at the top node level as a whole, the try replicating the Data source
with in your infoarea..
Hope it would help ..if yes..assign points.
Regards,
Manu.

Change to source system not possible

Our source system has a RFC problem conection, and when I try to change the parameters I have this meessage
Change to source system not possible
Message no. RSAR743
Diagnosis
The change to RFC parameters is not possible for source systems with manual meta data adjustment and data transfer from files.
Any idea?
thank you

Hi
It looks like, you don't have proper authorisations to change the source system..Please check with authrisations...
Thanks,
Teja

Current Android 2.1 OS Not Compatible with Bluetooth Voice Activation

After spending two frustrating days trying to make Bluetooth Voice Activation work with the HTC Incredible Android, I found out from HTC technical support that the Android 2.1 OS is not compatible with Bluetooth Voice Activation. Supposedly changes to the operating system will correct the problem, but you're out of luck until then.....whenever 'then' is! It appears that Verizon and HTC have not choosen to include that information in their marketing material. A bit irresponsible, especially if you live in a state that requires handsfree operation of your phone in an automobile.

It seems that Moto has a workaround in 2.1 on the Droid X:
I was just at VZW store this morning looking at the Droid X (which is currently at 2.1), and specifically asked an employee about this and he showed that it's solved on the Droid X -- he paired his bluetooth and demo'd handsfree dialing it for me.
Unfortunately, the Droid X is probably too large for me or my wife and the Droid Incredible doesn't have a solution for bluetooth handsfree dialing (yet).

How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
Or can I? Does anyone have a solution I don't realize exists?
Thanks,
Sowelu

AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs"; take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example. An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

Restrict Business Content Activation

Does anyone know of a way to restrict business content activation while still allowing developers to maintain objects in BW 7.0? I ran a trace while someone was activating an InfoObject and didn't see anything that I could use to achieve this level of control. If I remove the S_RS_ADMWB Maintenance (ACTVT=23) authorization for INFOOBJECT, then that stops the activation; however, we want our developers to be able to maintain existing InfoObjects. We just don't want most to be able to activate business content.
Thanks,
Gail

Thanks for your response, Raghu.
We have our own SAP development team at my company and don't typically use many consultants. It has always been our philosophy to allow our SAP developers to have comparable access across all our SAP development environments (e.g., ECC development, BW development, etc.) for cross-training purposes. But in reality, only a handful of our developers are very knowledgeable in our BW environment; we call them our "BW Administrators". These BW Administrators have concerns that one of the other developers who has played around in the BW environment but isn't all that knowledgeable might activate business content without realizing the implications of what they're doing. We would like for all of our developers to have RSA1 etc. so they can learn more about BW; however, per request of our BW Administrators, we want to restrict them such that they can't activate business content. But as you said (and per authorization tracing that I've done), there doesn't appear to be a way to restrict them from activating business content without also restricting them in other areas where we don't want them restricted. I guess we'll have to rely on administrative controls (i.e., training).
Gail

Error : Profit Center does not match with Business Area. Message no. ZGLTFI

Hi Everyone,
Error occurs when doing inbound PGR. Processed done so far are the following:
Normal PO created & released.
Inbound created
Transfer order created and confirmed.
When doing PGR via VL32N > click Post Goods Receipt error occurs
Profit Center does not match with Business Area
Message no. ZGLTFI0001031
Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
The same Profit Center was maintained in material master.
The Plant used was assigned to proper division and business area.
Any other ways to check?
Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
Tried to do other transaction involing the material, plant and profit center all give the same error.
Any info shared is much appreciated.
Thank you.

this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit. Please find the user exit, or talk to FI Team and ask what they check

Active transactional datasources not listed in business content collection

Dear experts,
for SRM bidding engine i have activated the extractors in SRM through transaction RSA5 and put them on a transport. Replicated them in BW and their they are appearing correctly, activated them and provided infopackages.
Now when i want to activate Business Content SRM role SAP_BW_SRM_ACT_BE and after grouping look for the transactional datasources, they are not listed in the list of objects (grouped 'before and after', collection 'automatic').
1.Is this normal and do i need to make the links between datasources and infosouces myself after activating the role?
2.or does it normally installs the entire flow correctly?
Also weird - my datasources are BI7.0 and some of my BW SRM content is from older 3.x version, containng infosources and communications structures. Can this be the reason why Business Content grouping does not find the datasources?
Regards,
Steven

Hi,
looked at the note but did not provide more info as i already applied what is written in the note.
This role for bidding engine after I have put it into the collective window, among the other objects it will activate it does not list the datasources of the transactional data, nor the links to the infosources.
Installing it like this will require me to connect the datasources manually to the dataflow, which i want to avoid.
Is there a way to make BW connect the transactional datasources of SRM Bidding Engine connect automatically with the business content BW flow of Bidding Engine? this i though would be done by collecting it (before and after), grouping (automatically).
Regards,
steven

Source system not Active error while installing BI content cube

Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.

Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams

Source System not collected with business content Activation

Similar Messages

Maybe you are looking for