Source system R3 gets hanged and unsaved data is deleted

hi experts,
I created a process chain with the data flow as, from PSA to cube. the data flow was in 3.5 earlier which is migrated to 7.0. But now i used the same info package to load into PSA in the process chains and DTPs after that.
Now when this process chain was scheduled, R3 source system got hanged and also unsaved data got deleted.
Could any one provide inputs on the same?
Thanks,
Lavanya.

Hi,
how the data will be deleted in source? I guess never it may happen in case of source hanging situations...
Once chk the data in RSA3 of source..
wht abt the previous status of ur chain?failed/successful/running?
Since it was a delta load ur last delta shuld be successful for the next run to be free to run...
rgds,

Similar Messages

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

Source System Creation in BI to load data from ECC 6.0

Our ECC 6.0 and BI 7.0 is one server. I would like to load data from ECC 6.0 to BI. How to create source system? I have source system for flat file and Data Mart (Myself source system) but don't know how to create source system to laod data from ECC 6.0. Please provide step by step guide.
Thanks.

Check here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
http://www.saptechies.com/connectivity-file-system-in-sap-bi/
http://help.sap.com/bp_biv370/html/index.htm
Thanks...
Shambhu

Function Module to get BEGIN and END date of a month?

Hello everybody,
Is there any function module to get BEGIN and END date of a month
GIVEN EITHER THE CURRENT SYSTEM DATE or MONTH?
Regards,
Sanghamitra.A.

hi
     CALL FUNCTION 'PA03_PERIODDATES_GET'
        EXPORTING
          f_abkrs               = p_abkrs1
        IMPORTING
          f_permo               = wf_permo
          f_current_begda       = wf_begda
          f_current_endda       = wf_endda
        CHANGING
          f_current_period      = wf_pabrp
          f_current_year        = wf_pabrj
        EXCEPTIONS
          pcr_does_not_exist    = 1
          abkrs_does_not_exist = 2
          period_does_not_exist = 3
          OTHERS                = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
this is the function module to get the first date and last date of a particular month
if u have any doubts ask
regads
karthik
reward points if useful

System is getting hanged while creating Adobe Form Layout

Hello,
I have Adobe Lifecycle Designer and Adobe Document Service Installed on our server, i have created Adobe form interface in transaction SFP and then a new form created with this interface passing the parameter carrid.
While creating from layout, through library section I used Text function, as I drag and drop text in to the layout, system is getting hanged everytime with message 1.275 bytes transferred.
Gurus please help me to understand this error.
Thanks,
Avinash

Get Adobe life cycle designer updated vesrion.
Also check your desktop/laptop if it has good RAM .
Adobe is quite fat application which depend upon ur sys prefomanc.
Hope this will help.
Thanks Dhiraj.

Mountain 10.8.2 do not like '.exe' file at all !! IT gets Hanged and then Force to restart

After Update with 10.8.2. The System get hang (stuck)
I had to do a forced restart, several time and even a ReBoot in safety more.
AND I FIGURED OUT WHY :
I realized that in one of my folder (Download) I had an ".exe" File; Than have been downloaded (because i got Parallel Desktop that neable window7 to run under the Mac), and causes the problem (system is hanged)
Then when I reboot in safety mode I deleted that file. And Then everything went OK.
But when I plugged my USB key, I got again my system that turn to stop... Then again Force to Restart, remove the USB Key.
Guess what!! In the USB Key (at the root) there was again some '.exe' Files...
In conclusion :
There is an issue with that new release of Mountain Lion 10.8.2 that cause the system to get hang, when "Finder" meet an '.exe' file.
It occurs only when you open your "Finder" then go throughout some folder where you have placed some '.exe' file. Then your system will not respond anymore. You got to force the restart
Just to make it clear, of course I do not want to run an '.exe' file under Mac.
But If like me you have Parallel Desktop in order to run Window7 or 8; you might have some '.exe' file that are located in your Mac Folder…..
Then, when you open 'Finder' and you walk through your folder and meet an '.exe' file, thus you system will freeze!!
Work Arround Solution, that's only happen if your '.exe' File is not associtaed to be open under Window Explorer (if you have Parallel Desktop, of course).
Then, make sure to associate the extension '.exe' to Window Explorer, if you have some '.exe' File that are located in your folder or USB key,
Otherwise your system will freeze and you will have to force the restart.
Cheers

That right I do not need to have any .exe file in my Mac environment; but having
installed Parallel Desktop (to have a Window Environment, due to business matters)
you might have from time to time some of that files ins download area or in the USB key.
The Test I made is very simple : I placed an .exe file in an USB Key; then plug in to my Mac
then from Finder open the folder where was that exe file…. Guess what ???
My computer get FREEZE (no respond)… I got to reboot.
Then I do not know what's going on. With the previous version (10.8.1) I never got such of issue ?
Here is the log beofre I had to restart:
2012-09-21 12:16:19 +0200 Finder[141]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
2012-09-21 12:16:19 +0200 Finder[141]: *** WARNING: Method userSpaceScaleFactor in class NSView is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: Method convertRectFromBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2012-09-21 12:16:20 +0200 com.apple.SecurityServer[17]: Session 100003 created
2012-09-21 12:16:21 +0200 awacsd[66]: Exiting
2012-09-21 12:16:25 +0200 kernel[0]: KLIF ERROR: scan for file /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n timed out, returning 1 as status
2012-09-21 12:16:30 +0200 System Preferences[186]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.

How to get header and item data in ME_PROCESS_PO_CUST ?

Hi all,
How can I get header and item data in me_process_po_cust~process_account ? I have to do some validation for account assignment catagory in item overview.

Hi ,,
Further make the following changes in method IF_EX_ME_PROCESS_REQ_CUST~PROCESS_ITEM.
Get Line item data using method:
CALL METHOD IM_ITEM->GET_DATA
RECEIVING
RE_DATA = W_ITM_DATA.
and then validate the item data from structure W_ITM_DATA..
Same as follows for Header Records:
In method IF_EX_ME_PROCESS_REQ_CUST~PROCESS_Header.
Thanks
Shambhu

To get evt_creation_date and _evt_creation_time data in a function module

Hi gurus,
How do we get evtcreation_date and evtcreation_time data into check function module or implementation of object type? I am using cdhdr and cdpos and able to write my own logic.
Thanks in advance!!!
Xevi G.

I think check FM's contain these value in any paramters.
Otherwise check CDHDR/CDPOS with appropriate OBJECT number etc.
This question can more appropriately answered in WORKFLOW forum.
Try [this|http://www.*******************/2007/09/work-flow-2.html] link also.

Business connector scheduler gets hanged and Next run value is large number

Hi All,
I see the scheduler in business connector gets hanged and the Next run value shows huge/large number like 9223370831700598.0 sec. Please can anyone suggest what can be done.
Currently BC ver is 4.7. The problem gets resolved every time when i restart the server.

Hi,
Not aware of the reason though, I guess you must be using the simple scheduled tasks.
Try using complex reapting tasks where you specify days , minutes etc.
It should work fine.
Hope it helps. Reward if useful.
Regards,
Siddhesh S.Tawate

Source System Connection between BW and R/3

Hi BW Gurus,
I have One DEV BW Client 400 and In DEV R/3 Client 100 and Client 200 are available.
Now my question is , Is it possible to link the R/3 Client 100 and 200 to BW client 400 Individually or Separatly.
Please have a look the link http://img168.imageshack.us/my.php?image=picturelv0.png
Except Cross Client
If possible , Can you tell me procedure.
Can you please help me out.
Thanks,
Bhima

Hi ,
It is possible . Follow the procedures of creating a source syatem seperately with RFC destination towards the respected clients . Then create 2 seperate source system in BW side and replicate them.
Regards
Renjith Kumar

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me

iPhone, iPad, or iPod touch not appearing in iTunes

Hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?, hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?

hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?, hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?

1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

E66 get hanged and restarted when selecting any th...

Hi friends,
I just purchased E66 3 week ago.
Its just awesome phone.
But when I tried to change theme from Grey to White steel directly without preview it gets hanged and restarted.
Anybody having this type of problem?
let me know

In the search window, if you can, search for "com.apple.finder.plist". Trash it, and restart.
If you can't do it, put your machine in Target Mode, and connect to a buddies machine. Search for, and remove, that same file.

I installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
Regards,
Steve

Get first and last date of month

Hi,
Is there any function module to get first and last date of month for a entered date.
Please let me know.
Regards,
SP

Hi,
Use the below FM to find the Last day of month and them u can easily calculate the first day.
DATA : v_startdate TYPE sy-datum.
DATA : v_enddate TYPE sy-datum.
DATA : v_temp TYPE dats.
v_temp = sy-datum.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
    EXPORTING
      day_in            = v_temp
    IMPORTING
      last_day_of_month = v_enddate
CONCATENATE v_enddate+0(6) '01' INTO v_startdate.
Hope it helps.
Regards,
Arnab.

Source system R3 gets hanged and unsaved data is deleted

Similar Messages

Maybe you are looking for