SPA9000 + SPA492 + analogic phone: Cancel Request doesn't work

Hi all, I'm build up a LVS in the following configuration: SPA9000 + SPA942 + analogic phone on FXS1; PBX connected to LAN with WAN interface and IP phones on the same LAN at all; "Force Media Proxy" parameter = "yes"; "Line 1" in trunk with an ITSP; no NAT parameter changed from default; WAG54GP2 on ADSL as Internet gateway in standard configuration. All seems running fine, except for one small but really fundamental function: I start an outbound call from SPA942 or analogic phone, the addressed phone rings and if I hung up before the call is accepted, the phone on the other side keeps the ringing up. In my opinion, it seems like a failed "Cancel" request. If I try to do the same with the analogic phone conected to WAG54GP2 all runs well, so I can exclude a signalling problem of the ITSP. Thanks in advance for your help.

Several things to try -
1) Set NAT mapping and NAT Keep Alive to yes on the SPA9000 line connected to the ITSP.
2) Setup port forwarding on the WAG54GP2 to forward port 5060 to the IP address of your SPA9000.
3) Replace the WAG54GP2 with a standard modem and connect the SPA9000 directly to it.

Similar Messages

  • My iPad updated and wants a security code. I tried the one from my phone and it doesn't work - I never entered a security code. How can I get in now?

    ?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT4623 i tried to update my phone and it doesn't work.

    i tried to update my phone and it doesn't work.  Tried restoring from DFU, and other things.  I got error message 3194 and have also gotten "this device isn't eligible for the requested build"  What do i try now?

    If it's stuck on the Apple logo, you'll have to force it into recovery mode and restore it.  See http://support.apple.com/kb/ht1808.

  • My iPhone is acting up again; freezing up during phone calls and now the head phone jack intermittently doesn't work.

    I got my iPhone 5 back in February 2013 and for the most part of the year I enjoyed it. Then I started having issues with it. First of all the WiFi randomly quit working. I didn't even update it. So I tried updating it, resetting, and restoring it. While it was under warranty I tried getting the issue fixed, but Apple CS blew me off saying it was accidental damage and I should have gotten Apple Care. This time Verizon covered their *** and replaced the phone for me even though it was out of their 6 month warranty period. I think I posted this experience before.
    Now my iPhone is acting up again. It first started freezing up during phone calls and now the head phone jack intermittently doesn't work. Again, resetting, restoring, and updating it did not fix these issues.
    <Re-Titled By Host>

    The original issue they didn't state exactly why it was Accidental Damage. After running through some troubleshooting, they just stated it was Accidental Damage and that I should file a claim with my insurance, and that Apple Care would have covered it; then closed the request.
    I've tried resetting settings, restoring it as new, and that was a no go. When it freezes up during calls I also have to perform a hard reset by pressing and holding both the power and the home buttons to get it functioning at all again(just completely freezes, won't respond to touch or home button.) I noticed that the proximity sensor isn't responding as well, so I have to tilt it away from my ear while in a call to keep from pressing the buttons on the touchscreen with the side of my face. I avoid phonecalls now, and text exclusively.
    I don't live anywhere near a Genius Bar so I'm stuck with the online support to Apple. And since I don't have a landline, I get charged for their phone support so I tend not to use it.
    Getting two lemons in a row seems coincidental so I'm wondering if it's a bad batch Verizon got then distributed out.

  • I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

    I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

    You can't "accidentally" put a passcode on any iPhone...its a multi-step process. Further, restoring an iPhone will remove the passcode, as the passcode is not included in an iPhone backup.
    Are you sure you're talking about the phone passcode & not something else...like the "Restrictions" passcode?

  • How can I cancel an email..cancel button doesn't work

    I have a blank email open and cannot close it..cancel button doesn't work. How can I get rid of it

    Sleep/Wake button
    http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg

  • I'm installing Creative Cloud on a MAC OSX 10.6.8   I have the 'installing window' displaying that it is about 95% complete but hasn't moved in 30 minutes; cannot quit it either...cancel button doesn't work, can't esc. What's up?

    I'm installing Creative Cloud on a MAC OSX 10.6.8   I have the 'installing window' displaying that it is about 95% complete but hasn't moved in 30 minutes; cannot quit it either...cancel button doesn't work, can't esc. What's up?

    I'm installing Creative Cloud on a MAC OSX 10.6.8
    You'll have to upgrade your operating system first.
    Most, if not all, Cloud apps require at least OS X 10.7.

  • SRDemo sample app - cancel button doesn't work correctly - how to fix?

    Hello all,
    I posted a question about this earlier, but didn't receive any response. I see that the new SR Demo app with jdeveloper 10.1.3 has the same problem, so I thought I'd re-post. Basically, the "Cancel" buttons don't work in web pages based on ADF.
    To re-create the problem:
    1). Run the SR Demo.
    2). Sign in as sking/welcome
    3). Navigate to "My Service Requests"
    4). Select request # 111 and View
    5). Click the Edit button
    6). Change the problem text to "Cancel doesnt work"
    7). Click the Cancel button
    You are now on the view page for the SR again. Even though you have clicked the cancel button, the problem text has been changed to "Cancel doesnt work" If you re-edit the request, the text has magically reverted.
    I see this as a pervasive issue in the ADF framework - what is the correct way to handle it?
    Kind regards,
    John

    John,
    Quick testing just now suggests that you can fix this issue in the EJB/Toplink version of the SRDemoSample by setting the "Immediate" property of the cancel button to "true".
    I'm not able to reproduce this in the SRDemoSample using ADFBC that is available in early-access release from here:
    http://www.oracle.com/technology/documentation/jdev/B25947_01/index.html
    This version has the cancel button marked as Immediate="true", so I think that should do th e trick.

  • My phone's earphone doesn't work which was bought from USA last month,the china apple store didn't accept the free repaired,so what can i do now?

    my new iphone5s's earphone doesn't work which was bought from USA last month,probably it was cause by falling down on floor insidentally one day before I came back china , the problem is ,the china apple store didn't accept the free repaire even the phone was bought only one month age, I was so disappointed and realized the iphone 5s is so  fragile,although I previous iphone4 which was also bought from USA 4 years age, it also fell down many times, it still works well now.  what can i do now? send it back to USA for repairing? if like that,it will take almost two month to finish the all processes,that not only waste the time spent on the way, also waste expense on the expense,the important prlblem is,  I can't use the phone during the repairing~ please give me a solution as soon as you can ,thank you very much!

    You can send it to someone you know in the US to have them take it in for service or you can get on a plane and take it there yourself. You can not ship it to Apple in the US for service.

  • New I phone 5 - camera doesn't work

    Bought a new I phone 5 and the camera doesn't work. Need help

    Camera
    Camera is not functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Is the camera app not opening? Or the app will open but the camera won't take pictures?

  • Phone Software update doesn't work with WiFi

    Can someone please help.
    I have an unlocked N97Mini. I'm trying to update the software version from 10.something to the currently available 12.something. For some reason my USB chord doesn't work (it only charges the phone, that's it) so I'm unable to use PC Suite. I tried to update the software wirelessly using WiFi but it won't let me do it, everytime I select on Phone Software under Application->SF Update it opens a pop up that says I have to use PC Suite. I uploaded other software through WiFi before such as OVI music, but it won't let me do it for the Phone Software.
    Please help. How can I update my Phone Software wirelessly?
    Thanks
    Andrei

    If you get the message that you need to use PC for updating the phone software, the software for your device variant may not yet be available for over-the-air update and you must do it via PC. You can check also if the same thing happens if you type *#0000# and select in this menu Options > Check for updates.
    If PC Suite is not working with your device, try installing the latest Ovi Suite version in your PC.

  • [solved]Mobil phone - bluetooth -ppd- doesn't work

    I have problem with my connection via bluetooth.
    I pair my mobil and notebook, it seems to be O.K. then I dial to the net - phone connect a connection is establish, but nothing works, not ping, not web browser. Can you help me where is the problem?
    i use
    >pppd call gprs
    gprs:
    debug
    connect "/usr/sbin/chat -v -f /etc/ppp/gprs"
    noauth
    usepeerdns
    /dev/rfcomm0 115200
    115200
    local
    nocrtscts
    defaultroute
    noipdefault
    lcp-echo-interval 0
    lcp-echo-failure 0
    /etc/ppp/gprs
    TIMEOUT         60
    ECHO            ON
    ABORT           '\nBUSY\r'
    ABORT           '\nERROR\r'
    ABORT           '\nNO ANSWER\r'
    ABORT           '\nNO CARRIER\r'
    ABORT           '\nNO DIALTONE\r'
    ABORT           '\nRINGING\r\n\r\nRINGING\r'
    ''              'ATE1'
    OK              AT+CGDCONT=1,"IP","internet"
    OK              ATD*99***1#
    CONNECT         \d\c
    ppp.log:
    pppd call gprs
    ATE1
    OK
    AT+CGDCONT=1,"IP","internet"
    OK
    ATD*99***1#
    CONNECT
    Serial connection established.
    using channel 1
    Using interface ppp0
    Connect: ppp0 <--> /dev/rfcomm0
    sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0xc7eaf41c> <pcomp> <accomp>]
    rcvd [LCP ConfRej id=0x1 <magic 0xc7eaf41c> <pcomp> <accomp>]
    sent [LCP ConfReq id=0x2 <asyncmap 0xa0000>]
    rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000>]
    rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
    No auth is possible
    sent [LCP ConfRej id=0x0 <auth pap>]
    rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0xa0000>]
    sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0xa0000>]
    sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
    sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
    sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
    rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
    Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
    rcvd [IPCP ConfNak id=0x1 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
    sent [IPCP ConfReq id=0x2 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
    rcvd [IPCP ConfAck id=0x2 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
    local  IP address 10.176.135.227
    remote IP address 10.6.6.6
    primary   DNS address 160.218.10.200
    secondary DNS address 160.218.43.200
    Script /etc/ppp/ip-up started (pid 8117)
    Script /etc/ppp/ip-up finished (pid 8117), status = 0x0
    I thing It is the right way but why it doesn't work?
    Last edited by walker.cz (2007-11-20 13:24:38)

    mucknert wrote:What's the output of your ifconfig and route? What's the content of your resolv.conf?
    resolve.conf
    # Generated by dhcpcd for interface eth0
    # search chello.upc.cz
    # nameserver 192.168.1.1
    ifconfig:
    ifconfig
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:366 errors:0 dropped:0 overruns:0 frame:0
    TX packets:366 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:19366 (18.9 Kb) TX bytes:19366 (18.9 Kb)
    ppp0 Link encap:Point-to-Point Protocol
    inet addr:10.177.143.12 P-t-P:10.6.6.6 Mask:255.255.255.255
    UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
    RX packets:3 errors:0 dropped:0 overruns:0 frame:0
    TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:3
    RX bytes:54 (54.0 b) TX bytes:66 (66.0 b)
    route:
    route
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface
    10.6.6.6 * 255.255.255.255 UH 0 0 0 ppp0
    default * 0.0.0.0 U 0 0 0

  • Bought a Skype phone but it doesn't work. How do I...

    I bought a Skype telephone through internet from the 'Skype shop'. I tried to install it but it doesn't work.
    Someone else tried to install it too - someone used to those things - but it does not work. I need to send it back to Skype but how do I go about this as I don't have an address? 
    Can anyone help? 
    Thank you!

    contact customer service
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Cancel Subscription doesn't work !!!

    1) On a expired Skype Number subscription, Skype keeps trying to charge the Credit Card 2) Even worse, it doesn't let the end user remove the Credit Card. It claims that it is required to cancel subscription first, but when the option is selected, nothing happens! 3) Hence, the subscription cannot be cancelled and the credit card cannot be removed. 4) The Support Contact Page doesn't offer an option to report issues like this. What is going on here?????  

    1.  Skype numbers are subscriptions so they will renew.  The renewal is billed 3 days before the subscription ends and continues to attempt to bill with the information on file for those 3 days.  If the payment doesn't go through it will resort to cancelling the subscription due to non-payment. 2.  You need to add a new credit card or cancel the subscription.  You can add a new credit card at any time.  You can cancel the subscription at any time.  If for some reason certain buttons don't work right, try another web browser.  The issue may exist with your web browser or a plug-in you have installed. 3.  You can't delete any credit card in use by a subscription unless you cancel that subscription.  If  you have another credit card on file you can switch payment of that subscription to that credit card.  You will then be able to delete the card on file as well.  This is rather common and makes sense to me.  Paypal subscriptions work the same exact way. 4.  You can contact Skype Customer Service but I believe that they may just walk you through the same exact process.   Skype Customer service can be contacted by filling out a Support request options on the Support Request page. https://support.skype.com/en/faq/FA1170    

  • Hello. I recently bought an Iphone 5S. I tried to charge it with the original charger that came with the phone and it doesn´t work...The cable is good, I´m charging the phone via my PC. I read many answers posted here but no one helped me. Thanks in

    Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.

    I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
    If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport"  it replies it cannot locate it)
    I suppose everything will be fine when you'll be out of censorship....
    Perhaps iOS  Apple Maps are absolutely useless for expatriate in China.
    Use Google Maps instead
    BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

Maybe you are looking for