Space around text in textField.

Hi,
See attatched code.
I made a simpel textFiled with some text and a border.
Does anyone knows how to get rid of the extra space between
the text and the border of the textField? I'm goning crazy with
this.
I made the width of the textFiled the width of the text and
the height of the textField the height of the text. But because of
the extra space the text will not show as I wanted to be.
Is there a solution for this? To remove the extra space
surrounding the text?
Thanks.

unfortunately no :(
I tried that already. There is also no top margin and bottom
margin property that I could use :(
I have a text line, and I must position this line to the x/y
coordinates of the righttop of the textField. But with this space
it will not exactly position on the given x/y.
There must be a solution to get rid of this space? Or maybe I
use the wrong object to do this?
Anyone?

Similar Messages

Space around text in a box

I am following the instructions regarding margins but whilst having lots of space on the right it remains very tight on the left. It's supposed to make the same amount of space all around the text??
Any ideas?

In the text inspector insert a margin last tick in the window after the paragraph adjustments.
Even if you don't use bullets you can also do some adjusment under that tab as far as space around text in the window.
As much as possible control your text with the sliders space before paragraph space after line spacing rather than extra characters as it is a much cleaner formating and when you make changes you won't have to remove any of those extras.
I was a print designer in another life, but text formating is text formating no matter where it is.
Mireille

White block around text in preferences UI window

I've recently started getting white (or very light grey) blocks around my text and controls in preferences windows. It doesn't do it in primary windows in osX. below is an example from the iTunes preferences window. Not sure when it started doing it...it was recent but other than calibrating my monitors I don't recall doing anything else that would cause such a thing. And going back to previous monitor calibrations doesn't fix it. Any thoughts?
Link: [http://www.imagebam.com/image/5c2d549490699]

You are opening an image directly in the browser -
MM_openBrWindow('dr_chm_allrgt_400x300.jpg'
In that case, you have no control over how the browser
displays the image.
To get control, you would have to open an HTML page that
contains the image
instead of opening the image directly.
There are extensions that will do this for you on the fly -
the one I use is
JustSo Picture Window from
http://www.valleywebdesigns.com
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"outmatch1" <[email protected]> wrote in
message
news:f4j86l$s1o$[email protected]..
> Hi. I'm using a JavaScript function that comes with
dreamweaver so what
> when
> users click on thumbnail images, a larger window pops up
with the image.
> Here's
> the function:
> <script type="text/javascript">
> 
> </script>
>
> Here's an example of how I'm using it in the code:
>
> <a href="javascript:;"><img
src="dr_chm_allrgt_200x281.jpg" width="200"
> height="281" border="0"
>
onclick="MM_openBrWindow('dr_chm_allrgt_400x300.jpg','','width=300,height=400')"
> /></a>
>
> This works great, except for one thing: the image
doesn't appear in the
> very
> top left-hand corner of the pop-up window -- there's
some white space
> around
> it, and the right and bottom edges of the image are cut
off, because they
> don't
> fit in the pop-up window. I'm wondering, is there some
way around this
> problem,
> that's less messy than changing the width and height
that I'm passing to
> the
> function every time?
>
> Thanks
>
>

Template with php script, white space around background, locking layers

two questions for 2 sites:
1.) first site http://www.beckervanhoveln.com
I can't get my background to line up correctly; there is a giant white border around the whole thing. With the amount of extra space around the background on all sides, I think it may be an issue with the illustrator file I am importing, but I can't see any way to fix it there, either. All the margins that I can find to change relating to that background are set to 0. Any ideas on what could be causing this? The image in Illustrator is 14" wide, so it's plenty wide enough to cover the whole page.
2.) site http://sai.theclothesgallery.com
I inserted php scripts into a page (in the editable paragraph region) and it is messing up the alignment of the page. Compare what you get on the home page with what you get when you click the "client login" button. Also, wondering where the extra body area came from on page http://sai.theclothesgallery.com/protected_downloads_zdr/validuser.php.
On both sites I am using wrapper and body tags, as directed in the tutorial by Nate (great one, thanks!). On my old site, http://www.theclothesgallery.com, everything works fine, but on the new ones I am just out of my mind. I've spent 10 hours over the last 2 days doing research and trying to manipulate code, to no avail. Thanks to anyone who can help.
Finally, is there a way to lock a layer inside or on top of another layer. for example, the layer the body text is in on site http://sai.theclothesgallery.com is on top of the layer that holds the page's images (which is an imported illustrator file with slices). Is there a way to lock that layer to the first one so it doesn't move if I make changes?

Kelly,
1. The image itself has a white border. You will need to crop that image
in an image editor such as Photoshop.
2. Looking at the source of the page you have two sections and
two opening toags but only one closingtag. The PHP
script is probably creating the additional sections, but without seeing
the script it is impossible to say for certain.
2a. You probably have a space or blank line before the opening

Removing White Space Around Header - from CSS?

What is causing the white space around the header and
above/below the top nav bar? There's also an extra white pixel
space between each of the buttons on the top nav bar.
See;
http://home.roadrunner.com/~phenline/products/prods_models_9_10_07.html
I've also attached the CSS stylesheet.
I thought it might be a valign tag but they are all in the
main text and are necessary to glue the 3 main sections just under
the top nav bar. I couldn't find any vspace or hspace options in
the code.
Because of the rollovers on the top blue horizontal nav bar,
I need the "class" option in each <td> tag. Otherwise, if I
put the class="navMain" option on the <tr> tag, then the
whole nav bar will show the rollover color. Or, I suppose I could
create 5 different CSS styles for each nav button ???
Any ideas? Thank you.

HI, for first you should to revrite tables to DIV, or you can
correct this with a CSS code for the table:
for example you shold to check the background color to the
same:
.x {
background-color: #3766c8;
for more example about Table CSS styling you can check a good
wizard:
http://www.somacon.com/p141.php
Titti
http://textures.z7server.com/

Creating boxes around text....

Hi,
I'm hoping there is a better solution to this problem then what I've using.
I would like to be able to create a box around text that is able to resize when increasing/decreasing font.
My working solution is to create a text box with text then use direct selection tool to select the anchors and convert that into a shape, either a rectangle or rounded rectangle. This isn't bad since it allows an equal amount of space around the text but it does have problems. If the font size increases or decreases, the box remains the same. I have to use the Area Type Option to resize the box. Also, if I wanted to do this for lots of boxes then I have to select all of the individual anchors which will be time consuming.
Is there a simpler solution?
Thanks.

Use the Selection Tool (Black Arrow) to select the text and then add a new Fill via the Appearance Panel.
Move the new fill below the Characters item in the Appearance Panel
With that fill highlighted choose Effect > Convert to Shape > Rectangle

Clear space around logo

I'm wondering if there are exeptions to the rule that you have to have a certain amount of clear space around a logo.
For example, we have Forms that people fill out, that are so full of text and lines, that we can't follow our own guidelines for keeping a certain amount of clear space around the logo, and the size of the logo (logo will have to be smaller than the min. size acceptable in our Brand Standard document – but still it would be very visible).
Since those Forms are not promotional items, I"d figure that we can break the rule, but other people around me don't think so.
Is there some kind of writing on this from some Authorities in the Marketing/Advertising field that someone could refer me to?
Thanks.

I'm going to try to stay on topic here and answer the best I can your question about forms. You can try to contact someone at graphicdesignusa.com or the graphic artist's guild, NY. There is a very, very fine line when it comes to brand, branding, and brand identity. The standards you mention in your original post should be followed to the letter. I wonder if they have specific reference information concerning forms where there simply isn't enough room to include all of the white space around the logo. I would make an attempt to follow their guidelines and present what the result is. If they ( whoever is your boss or client who ultimately has the approval power ) think it is acceptable the way it is based on their brand guidelines, then that's on them. I'm not aware of any information available out there where an exception can be made. You will have to present some variations and have them approve whichever they end up liking the most. I'd say three variations including one going by the book. Let them decide. And, get them to physically sign-off on the approved version.

Black space around webpages.

Hi I am very new to Dreamweaver. I made a site in Golive some time ago and I now need to update it and refresh it. I had a problem in Golive with a black space around all my pages which you can see at www.goldenumber.co.uk I was never able to sort this out in the golive forum and am hoping to have more luck here. Any suggestions?
Matt.

Unless I'm missing something in your question, I see the page as it was intended by the html and the css.
The black around the ediges the 'page' background - as defined in your stylesheet:
body { color: white; font-family: tahoma, verdana, arial; background-color: black; background-repeat: no-repeat; text-align: center; }
Your content area is contained within the wrapper div which is set to be centered with a width of 1000px.
#wrapper { background-position: center 50%; text-align: left; position: relative; width: 1000px; height: auto; margin-right: auto; margin-left: auto; }
This means that any browser window over 1000px wide will see the black background all the way around your wrapper/content area.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

How to maintain Space between text in Smart form

Hi Experts,
How to maintain space between text in smat form.
For example
I need to maintain like this
Prepared By:                       Passed By:                  Approved By:
    but after save it come like this
Prepared By:   Passed By: Approved By:
How to maintain spaces between texts?
Regards,
Sreedhar.

hi,
we can give space in the smartform in the same way as in the scripts with two commas one space can be given.
when u click on the text in the window ,
there in the general attributes at the left hand side u can find a small icon for editor in that u can define the spaces with the variable to be printed in &var&.

How to remove space below text?

In the screenshot below, how to remove space below text? I simply added a text box using the type tool and I get that extra space bellow the letter "B" that I don't need. I want to remove that space to center the letter within the octogon.
Thanks!

You might consider giving the letter a negative baseline shift and aligning it to centre.
That way you can adjust it so that its anchor point coincides with the centre of the hexagon.
Like this:
Another thing: You may find it easier working with type if you hide bounding boxes.

Export Excel Table in .txt File with space delimited text in UNICODE Format

Hi all
I've a big unsolved problem: I would like to convert an Excel table with some laboratory data in it (descriptions as text, numbers, variables with some GREEK LETTERS, ...). The output should be a formatted text with a clear structure. A very good solution is
given by the converter in Excel "Save As" .prn File. All works fine, the formattation is perfect (it does not matter if some parts are cutted because are too long), but unfortunately the greek letters are converted into "?"!!!
I've tried to convert my .xlsx File in .txt File with formatting Unicode and the greek letters are still there! But in this case the format is not good, the structure of a table is gone!
Do you know how to save an Excel file in .prn but with Unicode formatting instead of ANSI or a .txt with space delimited text?
Thanks a lot to everyone that can help me!
M.L.C.

This solution works in Excel/Access 2013.
Link the Excel table into Access.
In Access, right-click the linked table in the Navigation Pane, point your mouse cursor to "Export", and then choose "Text File" in the sub-menu.
Name the file, and then under "Specify export options", check "Export data with formatting and layout". Click "OK".
Choose either Unicode or Unicode (UTF-8) encoding. Click "OK".
Click "Close" to complete the export operation.

Reg: Adding spaces between texts in ALV list header

Hi All,
I was implementing a client requirement for ALV. The list header should contain something of this format.
Pgm Id: ZZZ01
After this list header it is ALV display.
I did this using the concatenate statement.
ex: Concatenate 'PgmID' sy-repid into listheader seperated by space.
But this is not showing spaces between text in ALV display. See I want a tabspace between the texts in headr. Any idea on how to mak it?
Rakesh

Depending on Fontsize the space might be so narrow that you believe its not there.
check in the debugger if there is really a space in the string, the clause "separated by space" will insert one for sure.
May be you'reshowing the ALV before you are modifying the listheader?
Another approach is using strings, blanks at the end of a string are not deleted
concatenate 'ABC ' 'XYZ' into s.
and
concatenate `ABC ` `XYZ` into s.
will give different results, be aware of the difference in the quots in both cases. Using the second example you can insert as many blanks as you want.

How do I create an outline around text please

hi all, How do I create an outline around text please
thanks,

You can see here that you can simply apply a stroke to live text by double clicking the stroke icon in the bottom left of the toolbar and selecting a color. I chose red.
If you select the text, then go to Type > Create Outlines, you get more options in the stroke palette, like whether the stroke is aligned to the outside or inside of the text object's boundary. The text below is outlined with the stroke aligned to the outside.

How to modify default Space Around Component in NetBeans 6.0?

Hi,
Does anybody know how to modify the default Space Around Component in NetBeans 6.0? I use Panel and either they stick completely to the border or stand too far. I can't find any options to modify this in NetBeans 6.0. I have tried using the 'Space Around Component...' functionality, but as soon as I move an element, NetBeans automatically replaces the values I have entered with default values I am not interested in.
Does anyone have the solution?
Thanks!

I think you just have to move the component holding the alt key... that way you can put the components wherever you want to..... it was alt, or shift, or another special key, try it... i don�t remember right now

Logic Pro X needs Rap around text in the Markers

Where is the Rap around text in the Markers, this is a major problem 4 me...............?!!!!

Henrik C G wrote:
Hi,
Thanks for answering.
I got: Svensk - Pro (Swedish Pro)
Where do i find the Logic Pro X preferences regarding this?
Sorry, I thought i was clear that I meant the Mac's system preferences, not Logic's preferences.
Might want to check your fonts for errors.

Space around text in textField.

Similar Messages

Maybe you are looking for