Spam Protection for Email showing Critical for Exchange Server 2007 after installing Symantec Mail Security for Microsoft Exchange

Hi there,
I have SBS 2008, and I have recently installed Symantec Mail Security for Microsoft Exchange  version 7.5 but when I take a look on Windows SBS Console under Security, it shows "Spam Protection for Email Critical Exchange Server 2007" However,
when I open the SMSME it shows running well with no problem..
Any Suggestions???
Thanks

Hi,
Would you please let me confirm whether all functions (which are related to Exchange Server) run as normal? Just
a confirmation, thanks for your understanding.
Please run
SBS BPA and check if find relevant issues. In addition, please refer to GaryD9’s suggestion in following thread and check if can help you.
SBS
2008 & Forefront Protection 2010 for Exchange - SBS Console Error
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • How to configure Symantec Mail Security for SMTP & Messaging Server 6.3

    Hi!
    I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.
    - Could you help me with this issue?,
    - Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.
    Regards, CR

    ctemp1 wrote:
    I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.I take it that you have configured the symantec software like this?
    internet -> symantec mail security system -> sun messaging server -> recipientA better approach is the following
    internet -> sun messaging server -> recipient
                              |
                             V
                  symantec mail security system(refer here: http://blogs.sun.com/factotum/entry/messaging_server_correctly_deploying_the)
    - Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.There is no documentation specifically for symantec software but we do document how to send emails via the symantec mail security server using the aliasdetourhost channel keyword:
    http://docs.sun.com/app/docs/doc/819-4428/6n6j42615?a=view#bgaqy
    Regards,
    Shane.

  • Decommissioning Exchange Server 2007 after staged migration to Exchange Online

    Hi there,
    I have recently migrated all our on-premise Exchange 2007 user mailboxes to Exchange Online/Office 365 using a staged migration running DIRSYNC (Windows Azure Directory Services Directory Synchronization Tool).  Now I would like to remove the old on-premise
    Exchange server but I am not sure if that would break things.
    Also with Disync enabled you cannot manage some mailbox properties in Exchange Online, it needs to be done with AD, right? If that is the case is it a good idea to have Exchange 2010/2013 Management Tools installed to manage the mailboxes?
    Thank you,
    Pieter

    Hello,
    Windows Azure Directory Services Directory Synchronization Tool is used to synchronize on-premises directory objects(users, groups, contacts) to cloud. If you want to remove the old on-premise Exchange server, you need to make sure you have moved mailboxes
    to o365 successfully, the mail flow is ok and the user can access their mailboxes.
    Here is an article for your reference.
    http://technet.microsoft.com/en-us/library/jj898486(v=exchg.150).aspx
    Not all operations for mailbox can be done via AD, so I recommend you install Exchange Management Tools to manage the mailboxes.
    If you have any feedback on our support, please click here
    Cara Chen
    TechNet Community Support

  • Grant Application Impersonation Rights for UPN on Exchange Server 2007

    Hi,
    I would like to know , how to grant application impersonation rights for UPN account in exchange server 2007 . As i am working for mailbox migration , i should have this rights . I can do impersonation rights for domain\username but not for [email protected]
    Please anyone help me , how to grant permission for [email protected] . 
    Big thanks in advance.
    .Thanks & Regards,
    vinoth

    Hi,
    I have a test in my environment using Exchange 2007, you can use the following cmdlet to assign Application Impersonation rights to an account using UPN.
    Get-ExchangeServer | where {$_.IsClientAccessServer -eq $TRUE} | ForEach-Object {Add-ADPermission -Identity $_.distinguishedname -User (Get-User -Identity
    [email protected] | select-object).identity -extendedRight ms-Exch-EPI-Impersonation}
    Get-MailboxDatabase | ForEach-Object {Add-ADPermission -Identity $_.DistinguishedName -User
    [email protected] -ExtendedRights ms-Exch-EPI-May-Impersonate}
    Note: Please change the "[email protected]" to the UPN you want to use.
    Hope my clarification is helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange server 2007 still on version 8.1 even after applying sp3

    hello,
    I have exchange 2007 version 8.1 and I want to migrate to exchange 2013, so in order to to that I need to upgrade the exchange 2007 to sp3.
    I install the sp3 without any issue but the version of the exchange 2007 still 8.1, I try to re install but it show that the sp3 already installed.
    any idea about this issue?
    thank you

    Hi
    As is well known, you
    must patch Exchange 2007 to the very latest Service Pack and Update Rollup before you attempt to do anything with Exchange 2013.
    According to your description, I suggest you should check the rangeUpper value by using ADSI Edit .  If the value was 14625. This indicates
    your schema is at Exchange 2007 SP3.
    Here is the article  for your reference:  https://supertekboy.com/2014/05/01/check-exchange-schema-objects-adsi-edit/
    Also you could re-install the patches in the following links .
    Please download and install these patches from here:
    Exchange Server 2007 Service Pack 3: https://www.microsoft.com/en-gb/download/details.aspx?id=24111
    Exchange Server 2007 SP3 Update Rollup 10 : https://www.microsoft.com/en-us/download/details.aspx?id=36708
    Hope it’s helpful to you .
    Best Regards,
    David

  • How to setup microsoft outlook 2011 with exchange server 2007

    How to setup microsoft outlook 2011 for Mac with Exchange server 2007?

    The folks who set up the Exchange Server should be happy to help you.

  • Migrate Active Directory 2003 to 2012 R2 and Exchange Server 2007 to 2013.

    My question is which one need to migration first. Active Directory 2003 to 2012 R2 and FFL & DFL or Exchange Server 2007 to 2013.
    Md. Ramin Hossain

    My question is which one need to migration first. Active Directory 2003 to 2012 R2 and FFL & DFL or Exchange Server 2007 to 2013.
    Domain. For Exchange installation and upgrading to 2013, you need to make sure that your domain controllers can understand attributes of exchange 2013. Besides if you have DC/Exch on the same server which is 2003 is not supported. Because Windows Server
    2003 is not supported.
    Migrate your domain to at least 2008 R2 and then proceed with Exchange 2013.
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • How to recover mailbox details in Exchange server 2007

     
    Hi,
    Problem is Exchange server 2007 user mailbox has been deleted and it’s already purged. Now we need to recover that mailbox. Is there any way to recover purged mailbox in Exchange server 2007?
    Or we are planning create new mailbox and help me to find old mailbox server and database details then I will restore data from backup. Please suggest if you have better idea than this one. Thanks

    I would suggest using one of your backups and creating a recovery database and pulling the users mailbox from that recovery database. 
    http://www.msexchange.org/articles-tutorials/exchange-server-2007/high-availability-recovery/Working-Recovery-Storage-Groups-Exchange-2007.html

  • Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

    Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
    Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
    Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
    is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
    Any help is appreicated!
    Thanks

    Hi,
    From your description, you want to achieve the following goal:
    Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
    Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
    Hope my clarification is helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • I have an apple iphone 4gs... It is synced with my outlook exchange in the office. If I do a search for emails that also checks the server then all of a sudden I end up with various amounts unread email with the inbox saying "Inbox 71" ..which is not true

    I have an apple iphone 4gs... It is synced with my outlook exchange in the office. If I do a search for emails that also checks the server then all of a sudden I end up with various amounts unread email with the inbox saying "Inbox 71" ..which is not true. The only way to make the inbox on the iphone back to 0 is to delete the account then re install it.
    Anyone have any ideas

    We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

  • Exchange Server 2007 shows email as "Receive" but not "Deliver"

    Hi Guys
    We have Exchange Server 2007 inside of a SBS 2008 set up.
    One specific email from a regular sender wasn't received by the recipient. The recipient is used to receiving messages from this sender and the email is not hiding within Outlook.
    Exchange 2007 mail tracker shows the email was received, but that's it. Nothing has happened to the email after that. Normally we'd see a "Deliver" report, or possibly a "Fail", but always something to show the email has been actioned
    in some way.
    The queues are all empty.
    So, this one email has disappeared into the ether of Exchange! So far as I can see, this is the only email with only a "Receive" notification. All others have something else immediately following the Receive.
    The Server has GFI anti-spam installed, but that hasn't seen the email either, because emails are collected by Exchange before being passed to GFI. In this instance it hasn't been passed, or returned to the sender as undeliverable. It just seems
    to have been eaten.
    Would anyone have any sensible suggestions on where to start kicking this email back into life?

    Hi Simon
    Apologies for the late response, but I only get to this client once a month.
    1. Did the sender get NDR? ~ No
    2. Let the receiver check the email via OWA and see
    whether the email is available. ~ Still not available
    3. Use MFCMAPI to check the user mailbox, can you
    find the missing email? ~ I haven't yet worked out what is MFCMAPI or how to use it to check, but I suspect that as the Exchange email tracker doesn't have any actions after "Receive" that it cannot have sent the email on to the user's mailbox or rejected
    the email as non-deliverable.
    The client isn't too willing to expend too much effort
    / cost on this issue which does appear to be a one-off glitch, but I am interested in resolving it for myself as I haven't heard of this problem before.
    Thanks for the interest,
    Michael D

  • MS Forefront Server Security for Exchange Server 2007 SP1 - License Expired - Unable to update

    Hi
    1. My Windows SBS 2008 Server Console shows:
    Virus Protection for e-mail STATUS alert CRITICAL (Forefront Security for Exchange Server)
    Details: None of the engines enabled for updates have been updated in the last week.
    Forefront Security for Exchange Server SP 1
    2. Event Viewer
    Error GetEngineFiles
    Event ID 6012
    Generation: Microsoft Forefront Server Security encountered an error while performing a scan engine update.
    Scan Engine: vBuster (same for microsoft, Kespersky5, Wormlist, etc.)
    Error Code: 0x80004005
    Description: The product license has expired.
    Error Microsoft Forefront Security
    Event ID 7007
    General: None of the engines enabled for updates have been updated in the last week.
    3. About forefront
    Opened Forefront Server Security Administrator > Help > About Forefront
    Forefront Server:
    Version: 10.1.0746
    Service Pack: 1
    Product Id:
    Licensed Components:
    Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
    DO I HAVE TO BUY THIS PRODUCT or DO I HAVE TO INSTALL Forefront Security for Exchange Server SP2 or SP3?
    Can please someone advise in this regard,
    Thanks

    -->Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
    Evaluation version? didn't activate this product? You
    can convert an evaluation license to a subscription license by activating the product. Be sure to have the product key available when activating FPE. After the product is activated, you can also align when the product expires with your license agreement, and
    easily renew your license by entering a new expiration date.
    Best,
    Howtodo

  • Symantec Mail security & Forefront protection for Exchage on same environment

    We are Running Symantec Mail security on Edge transport with all strict antispam policies but still some users once in a while recieve a spam here or there ,so we are planning to install Forefront Protection for exchange on hub transport , so both products
    are running , is this a do able scnerio , will we face any issues....please suggest from Microsoft point of view,

    Hi,
    As far as I know,  no single tool or process can eliminate all spam. For more spam features and easier management, you can elect to purchase the Forefront Online Protection for Exchange (FOPE) hosted email filtering service or the next version
    of this service, Microsoft Exchange Online Protection (EOP).
    http://technet.microsoft.com/en-us/library/jj218660(v=exchg.150).aspx
    http://technet.microsoft.com/en-us/library/jj673032(v=exchg.150).aspx
    Thanks,
    Angela Shi
    TechNet Community Support

  • Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007.

    Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field since our autodiscover function is not functioning. But still it doesn't work. There are no errors, no popups. We turned on the logging and in the logs, it says a error of -3259. We are stuck and any help will be really appreciated.

    I have a customer experiencing exactly the same issue. Their computer is running Windows 7 Pro with Office 2007 SP3. After seemingly exhausting all troubleshooting options, I backed up their data, formatted the hard drive and performed a clean install of
    Windows and all their applications. It didn't solve the problem!
    What's strange is the customer also has a laptop computer, running the same version of Outlook, and that doesn't experience any problems connecting to Office 365 on the same network.
    My next step is to send the customer a new ADSL modem/router to try.
    I have another customer on Office 365, also running Outlook 2007, and they also experience issues with emails sitting in the outbox while Outlook displays the status message “Outlook is trying to retrieve data from the Microsoft exchange server outlook.office365.com.”
    In this case Outlook doesn't freeze/stop responding, like it does for the first customer I mentioned.

  • After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

    After installing the safari update for windows, outlook is now not opening email hyperlinks.  I have set safari to be my default browser but outlook won't open it when I click a link.  I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator."  Please help.

    Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
    This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
    To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
    * http://windowssecrets.com/forums/
    * [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
    * [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

Maybe you are looking for