Spam report thread too long by now?

The present Spam report thread [4] was initiated over a year ago when the old thread was 190 messages long, because "...the previous thread ... has served its purpose but is getting too long to be read comfortably on mobile devices". Well, the present thread has well exceeded that mark, as it was 422 messages long at the time I started to write this message.
Wouldn't it be time to let the present thread rest in peace by the same argument that led to the closing of the previous one? Not that I use mobile devices to visit these forums, but...

The idea of closing Spam threads when they get too long and replace them by brand new ones is not mine. As I said in my opening message here, it was the official argument for closing the [3] Spam thread when it was 190 messages long. Well, the [4] Spam thread got 422 messages long and there was no official reaction, so I opened this thread to find if this was just an oversight.
A few days later, the [4] Spam thread was archived (and therefore closed) for reasons that were never explained, and a replacement one was no opened, so I tentatively opened a new one, the present [5] version, explaining my reasons for doing so:
http://forums.adobe.com/thread/837370?tstart=0
Now the [5] Spam thread is 476 messages long (at the time of writing this), and it has not been closed, archived or replaced, so I don't think any participant should open a replacement one. This should be done officially by someone with the power to close the present version.
On the other hand, if the reason given for closing the [3] version is no longer valid, and the length of Spam threads has no importance whatsoever, I think this should be clearly stated. As I access the forums through browsers, the length of the threads does not affect me in the least, and I have no idea if it affects participants accessing the forums by other means.

Similar Messages

  • I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggestions?

    I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggestions?

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • I shut down when an upgrade was taking too long yesterday, now Itunes will not open today

    I shut down when an upgrade was taking too long yesterday, now Itunes will not open today

    Hello James,
    Thank you for using Apple Support Communities!
    From what you are describing, I have 2 recommendations. First, troubleshoot for 3rd party plugins that may be causing an issue after the interrupted update:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    If the issue persists after followign the article, I would next download iTunes from the download page, and install it.
    http://www.apple.com/itunes/download/
    Take care,
    Sterling

  • My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do

    My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Discoverer report taking too long time to open.

    HI,
    Discovere reports are taking too long time to open. Please help to resolve this.
    Regards,
    Bhatia

    What is the Dicoverer and the Application release?
    Please refer to the following links (For both Discoverer 4i and 10g). Please note that some Discoverer 4i notes also apply to Discoverer 10g.
    Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362851.1
    Note: 68100.1 - Discoverer Performance When Running On Oracle Applications
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=68100.1
    Note: 465234.1 - Recommended Client Java Plug-in (JVM/JRE) For Discoverer Plus 10g (10.1.2)
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=465234.1
    Note: 329674.1 - Slow Performance When Opening Plus Workbooks from Oracle 11.5.10 Applications Home Page
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=329674.1
    Note: 190326.1 - Ideas for Improving Discoverer 4i Performance in an Applications 11i Environment
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=190326.1
    Note: 331435.1 - Slow Perfomance Using Disco 4.1 Admin/Desktop in Oracle Applications Mode EUL
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=331435.1
    Note: 217669.1 - Refreshing Folders and opening workbooks is slow in Apps 11i environment
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217669.1

  • Report Takes Too Long Time

    Hi!
    I am in troubble
    following is the query
    SELECT inv_no, inv_name, inv_desc, i.cat_id, cat_name, i.sub_cat_id,
    sub_cat_name, asset_cost, del_date, i.bl_id, gen_desc bl_desc, p.prvcode, prvdesc, cur_loc,
    pldesc, i.pmempno, pmname, i.empid, empname
    FROM inv_reg i,
    cat_reg c,
    sub_cat_reg s,
    gen_desc_reg g,
    ploc p,
    province r,
    pmaster m,
    iemp_reg e
    WHERE i.sub_cat_id = s.sub_cat_id
    AND i.cat_id = s.cat_id
    AND s.cat_id = c.cat_id
    AND i.bl_id = g.gen_id
    AND i.cur_loc = p.plcode
    AND p.prvcode = r.prvcode
    AND i.pmempno = m.pmempno(+)
    AND i.empid = e.empid(+)
    &wc
    order by prvdesc, pldesc, cat_name, sub_cat_name, inv_no
    and this query returns 32000 records
    when i run this query on reports 10g
    then it takes 10 to 20 minuts to generate report
    how can i optimize it...?

    Hi Waqas Attari
    Pls study & try this ....
    When your query takes too long ...
    hope it helps....
    Regards,
    Abdetu...

  • GPG / pin-entry passphrase / mantra too long (limit now 22 chars)

    I was wondering why the gpg pass-phrase (german trans.: Mantra) is now limited to 22 chars (tested with gtk. For ncurses this may vary slightly) and if there is a workaround available?
    As I understand pin-entry (a helper  that passes the password to the gpg-agent) is now mandatory and not replaceable any longer. But if I try to use gpg, I  get the error message:
    passphrase too long / (Ger: Das Mantra (Passphrase) ist zu lang!)
    http://virtualhorde.com/MEDIA/mantraTooLong.jpg
    According to the gpg manual this limitation should not exist (and is also insecure):
    gpg manual wrote:"There is no limit on the length of a passphrase, and it should be carefully chosen. From the perspective of security, the passphrase to unlock the private key is one of the weakest points in GnuPG (and other public-key encryption systems as well) since it is the only protection you have if another individual gets your private key. Ideally, the passphrase should not use words from a dictionary and should mix the case of alphabetic characters as well as use non-alphabetic characters. A good passphrase is crucial to the secure use of GnuPG."
    Also the responsible source-code is not inspiring confidence (call-pinentry.c) (no mlock or zeroing):
    static gpg_error_t
    getpin_cb (void *opaque, const void *buffer, size_t length)
    struct entry_parm_s *parm = opaque;
    if (!buffer)
    return 0;
    /* we expect the pin to fit on one line */
    if (parm->lines || length >= parm->size)
    return gpg_error (GPG_ERR_ASS_TOO_MUCH_DATA);
    /* fixme: we should make sure that the assuan buffer is allocated in
    secure memory or read the response byte by byte */
    memcpy (parm->buffer, buffer, length);
    parm->buffer[length] = 0;
    parm->lines++;
    return 0;
    Without further investigation I would assume that the (short/insecure) pass-phrase is copied without any precautions in memory.
    (Edit: fixed typos )
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
    Last edited by yousry (2014-12-25 13:13:04)

    Leonid.I wrote:When do you see this warning? My passwords are 23+ characters and I have not encountered such warning...
    I was in a hurry yesterday, so I most likely miscounted the number of asterisks in the password dialog. I think the maximum passphrase length is 99 characters.   
    To clarify my problem I would like to explain it with following example:
    Imagine you have created a keyring with application keys, shop keys and server-certs several years ago and encrypted it with following passphrase:
    "My pet T-Rex sucked at my bones during the 8 o'clock 0pera performance of my cat which was also a great success."
    (A more or less memorable sentence because it is visualizable/unusual)
    If you have recently updated gnugp to version 2.1.1 and now try to sign a new version of one of your applications, you will get an error message during keyring unlocking, stating that your passphrase or (ger.) Mantra is to long.
    Is there an alternative to compiling and installing a previous version of GnuGP?
    The problem can be reproduced with following snippet:
    # Backup your keyring
    $ mv .gnupg gnupg_bak
    # create a new (pub/private) key.
    $ gpg --full-gen-key
    # I'm choosing the default encryption
    gpg: directory '/home/yousry/.gnupg' created
    gpg: new configuration file '/home/yousry/.gnupg/gpg.conf' created
    gpg: WARNING: options in '/home/yousry/.gnupg/gpg.conf' are not yet active during this run
    gpg: keybox '/home/yousry/.gnupg/pubring.kbx' created
    Please select what kind of key you want:
    (1) RSA and RSA (default)
    (2) DSA and Elgamal
    (3) DSA (sign only)
    (4) RSA (sign only)
    Your selection? 1
    # On modern CPUs you can use the maximum key size
    RSA keys may be between 1024 and 4096 bits long.
    What keysize do you want? (2048) 4096
    # The key should expire after one year
    Please specify how long the key should be valid.
    0 = key does not expire
    <n> = key expires in n days
    <n>w = key expires in n weeks
    <n>m = key expires in n months
    <n>y = key expires in n years
    Key is valid for? (0) 1y
    Key expires at Sat Dec 26 07:51:28 2015 CET
    Is this correct? (y/N) y
    # Now you are asked for your personal data
    GnuPG needs to construct a user ID to identify your key.
    Real name: Max Muster
    Email address: [email protected]
    Comment: Not a real email adress.
    # If your input was OK you can create the key:
    You selected this USER-ID:
    "Max Muster (Not a real email adress.) <[email protected]>"
    Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? O
    # A password dialog appears
    # Let's say we use following passphrase (generated for easy counting purposes):
    aaaaaaaaaa1111111111----------bbbbbbbbbb2222222222----------cccccccccc3333333333----------dddddddddd
    You will get the error message: "Pass Phrase too long."

  • Drill Through reports takes too long

    Hi all,
    I need some suggestions/help with our drill through reports. We are using Hyperion 11.1.1.3 and the cube is ASO.
    We have drill through reports set up in Essbase studio for drilling down from Essbase to Oracle database. It takes too long (like 30 mins for fetching 1000 records) and the query is simple.
    What are the changes that we can do to bring down this time. Please advice.
    Thanks.

    Hi Glenn,
    We tried optimizing the drill through SQL query but actually when we run the directly in TOAD it takes *23 secs* but when we do drill through on the same intersection
    it took more than 25 mins. Following is our query structure :
    (SELECT *
    FROM "Table A" cp_594
    INNER JOIN "Table B" cp_595 ON (cp_594.key = cp_595.key)
    WHERE (Upper(cp_595.*"Dim1"*) in (select Upper(CHILD) from (SELECT * FROM DIM_TABLE_1 where CUBE = 'ALL') WHERE CONNECT_BY_ISLEAF = 1 START WITH PARENT = $$Dim1$$ CONNECT BY PRIOR CHILD = PARENT UNION ALL select Upper(CHILD) from DIM_TABLE_1 where CUBE = 'ALL' AND REPLACE('GL_'||CHILD, 'GL_IC_', 'IC_') = $$Dim1$$))
    And ----same for 5 more dimensions
    Can you suggest some improvement ? Please advice.
    Thanks

  • Going to the LastPage of a report takes too long

    <p>Hi,</p><p>Using Web ReportViewer. Pressing the LastPage button in the browser&#39;s window takes LONG time before the last page appears (and almost 100% CPU), as the CR control apparently generates the complete document internally, before showing its last page. For a few hundreds pages long report the time can easily be 20+ minutes.</p><p>No SubReports, no fancy formulas etc. IIS running on a powerful machine with plenty of grant. Single application, single user.</p><p>Can anybody suggest a way to optimise/change the behaviour?</p><p>Much appreciated.</p>

    This is a known issue with Crystal. The more work that your report does the worse it is. The only way to move to the last page is for crystal to "virtually produce" every page.
    Some things that you can to to speed this up.
    1. Do not have "Page n of x" as this slows down the production of the first page.
    2. Many reports will suppress the detail line only showing the Group totals this increases the number of records that Crystal has to work with. If I am just showing summary values I use a stored proceedure to do the aggregation.
    3.Use a stored proceedure to do all of the formula work and use Crystal only to paint the data. I often play the game of how few formulas I can have in the report. I look at each formula and see if that work can be done in the stored procedure.
    4. If the user is just viewing a pre run report as opposed to having the user specificly run the report have the report exported to .pdf and just post the PDF. By the way with R2 (But not if not R2). You can export the group tree to the PDF.
    5. One last thing pagination likes memory I have 2gb on my machine (a workstation) if you are running on a server make sure that memory is available to Crystal.

  • Report takes too long to display

    Post Author: NGCMatt
    CA Forum: Publishing
    I am using Crystal XI, Vsual Studio 2003, SQL Server 2000 and Windows Server 2003. I create a report in Crystal and then add it to my Visual Studio 2003 project. Then using the CrystalReportViewer in Visual Studio 2003 I create a webpage then stick in the CrystalReportViewer on the page then add all the properties and other code in the code behind page. Like a close button on the page so when the user clicks on the close button the crystal report page closes and goes back to the home page.
    When I run the report from my developement machine the report displays in less than 5 seconds and when the close button is clicked the crystal reports page closer in less than 2 seconds and returns to the home page.
    But after I deploy by web app to the server and try to run a report it ALWAYS takes longer than 40 seconds to display and even longer to close. This is driving my customers crazy.
    What am I missing??????
    Thanks for the help.
    Matt

    Is it possible the java memory is not high enough on the service (assuming Windows). Try to Set the JVMOption to -Xmx1024m (default is 512m) on the "HyS9WebAnalysis" registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\WebAnalysis

  • SQL Query based BI Pub report - Taking too long to produce the output

    Hi All,
    I was trying to produce a BI Publisher based report through enterprise edition of BI Publisher 10.1.3.4
    Its a sql query based report and it has around 20 columns and it has around 1 lakh records.
    The query actually takes only 2 seconds to execute in the database but when we execute from BI Publisher it takes a long time and also it times out most of the time
    Is there something I am missing in the configuration options ?
    Thanks
    Shasi

    I am facing the same problem as well. I am using the Publisher Web service API to run a report with 1 Million records. This report is configured to use OBIEE. It takes a lot of time to generate the report ( around 30 Mins) and even though OBIEE generates the data, my web service client either timesout. Even after increasing the timeout, a 500 internal server error is thrown . Does anyone know of a solution to this.
    Thanks

  • Read report line too long error ?

    hi friends.
    my program allowed this error.
    read_report_line_too_long
    what do I do ?
    help me please

    Don't do any setting changes, try to modify the code if it is custom namespace.
    assume this the code with more than 72chars..
    read table itab into wa_itab with key matnr = v_matnr  vbeln = vbeln transporting something binary search
    you have to break that into two lines like the below..
    read table itab into wa_itab with key matnr = v_matnr
                                                  vbeln = vbeln
                               transporting something binary search
    where ever you find the line more than 72 chars you change it. not event comment lines should not exceed more than 72 chars.
    what are you doing exactly can you let me know..
    if you are using READ REPORT if you have a program with more than 72 chars length then you will end up with that error. see the standard SAP documentation
    DATA prog TYPE c LENGTH 30.
    DATA itab TYPE TABLE OF string.
    prog = '...'.
    READ REPORT prog INTO itab.
    Catchable Exceptions
    CX_SY_READ_SRC_LINE_TOO_LONG
    Cause: At least one line of the source code is longer than the rows of the internal table itab.
    Runtime Error: READ_REPORT_LINE_TOO_LONG

  • What do I do if I sent a message that was too long and now my iMessage will not work.

    So I sent really long message on iMessage using an itouch 4g to an iPhone 4. At first both our iMessage accounts were frozen, but she got hers back and now I am recieving her messages but I can't view them or respond or even delete the conversation to start a new one...

    I have the same Probalem also !
    I tried everything
    -turning off my iPod n ipad
    -turning off iMessage n turning it back on again
    -changing my DNS
    -checking my mail
    ALl of it didn't work help me pls

  • I pressed command d when starting my macbook air but i pressed it for too long and now it is searching for something? heeelp please!!!!

    pleeeasee help!!! i dont know what to do! at first, i was just cleaning my macbook keyboard and i pressed something that changed keyboard language, but i checked everything and it all said that everything was alright, later, i turned off macbook- in hope that when i turned it on, everything would be normal, but then,  i couldn't even sing in my account  because i had a password set on it, and every time i try typing the password it types something completely different, and then, i read a post, that in cases like this, we should press command+d while the computer is turning on, and let release the keys as soon as i see grey screen. BUT (i am so dumb) that i pressed it longer... and now, i don't know what it is doing, but i's telling me to choose network, but when i am trying to choose it, and  write the password, it doesn't do  anything! pleasee help me somehow!!!

    It is easy to change the keyboard language by pressing apple/command plus space.
    What other keyboards besides US did you have activated on your machine?

  • Cost Breakdown Report Runs too Longs

    Hi All
    When I run Costing Reports its takes about 6-7 hours , last month the reports was working fine without any problem takes 3-5 min at most .
    I check pay_action_parameters and everything is fine , Reports Not Customized its by oracle .
    Note : i Already open SR with Oracle , but Want to see if some one have the same problem
    Hussein Sawwan : did you see this problem before !!!! Thank you All
    Br
    Osama

    Yes I did , For Hr , And For ALL
    But the Same , Actually i start thinking its bug i faced this issue on another customer site but On Gl schema with posting Reports After investigation i discover its Oracle Bug on Indexes And I applied patch for this issue now its solved .
    BR
    Osama

Maybe you are looking for

  • Problem with ENCTYPE='multipart/form-data'

    In my program I want to upload a file along with other details. I've dowloaded org.apache.commons.fileupload.* jar files and everything works fine only if I give <INPUT TYPE='file' NAME='file1'> i.e the file is uploaded But if I add any other field i

  • How can I sync my iPhone contacts to my Mac and vice-versa, without losing them? Can i do it with iCloud?

    I always add new phone numbers on my iPhone Contacts, while new email addresses are always added on my Mac Contacts. The result is that I dont have my recent email contacts on my phone, while on the Mac I dont have the recent phones. I would like to

  • Boot Error

    I have a HP laptop Pavillion G6 series. Windows 7, 64 bit My laptop is having a problem at the moment as it only stuck at Widows Boot Manager. It states the following: File: \Boot\BCD Status: 0xc00000e9 Info: An unexpected I/O error has occured Pleas

  • Désinstaller In Design CC sur Mac Os

    Comment désinstaller cette application ? Merci d'avance

  • Don't forget to DEFRAG your Hard Drives!!!

    I upgraded to 1.1 about 3 weeks ago. I had noticed that it was slower in showing 1:1 previews and using develop than 1.0. So I tried optimized the DB. that helped, a little. Then early this morning I was doing regular computer maintenance and realize