SPAM/SAINT - OCS package does not match current software component vector

Hello Experts,
This could happen on any type of system I suspect, but it is on my Solution Manager (7.01 on Eh1). I downloaded a support stack (27)and was checking the components requirements. I use the Directory box in SPAM, and I go into New Support Packages. I highlight the support package for ST 400 then click on the Queue button. It comes back with this message: OCS package SAPKITL437 does not match the current software component vector.
I click continue and the requirements window comes up. It shows that I have currently loaded the wrong BI_Content. It says: Non-permitted release of add-on BI_CONT installed. The release information is BI_CONT,706.
If I go back to the main window to look at the current package level, I see that BI_CONT component release (loaded) is 704 - sp 8.
I must have gotten very creative when loading that back in 2008. MOPZ was used, but it was before the support stack restrictions were in place on my system.
I can't get around this issue, because even trying to load the Basis support package I get this message.
If anyone has had the problem and knows what to do I would appreciate some help. Notes searching has not found anything. So far my Customer message has not been helpfull, but it is not SAP support .
Pat

Hi Patricia,
Please, check prerequisites for SAPKITL437 in SPAM.
It seems like you need to install/update some components in SAINT before.
From official note: https://service.sap.com/sap/support/notes/1274287
"Requirements with component ST400 for SP27
- Support Package 00 for BI_CONT 706 (SAPK-706BHINBICONT)
- Support Package 00 for ST-BCO 400 (SAPK-400AGINSTBCO)"
Additional info: https://service.sap.com/sap/support/notes/1169247
Best Regards,
Aleh
Edited by: Aleh Mikhniuk on Jul 20, 2011 1:59 PM

Similar Messages

Ocs package does not match the current software components

Hi Experts,
In our SAP ERP 6.0 system few components like SAP APPL,EA APPL ,FinBasis were already upgraded to 603 SP04 long time back.
Now to install language,we need to upgrade all the components to EHP3.The pre requisite to upgrade to EHP3 as per note number 1095233 is SP08.Few of our components are at SP06 level and i downloaded the supported packages of all the components to upgrade to SP08 and then upgrade to EHP3.
When i try to display/define the component ECC-DIMp,i get the eror message message" ocs package does not match the current software componentu201D when trying to apply ECC-DIMPu201D .When i looked at the queue,the SPAM is looking for prerequisites of components EA APPL 600 and SAP APPL 600(This components are already upgraded to 603 level).
Please suggest me the option.
Thanks
satish

Hi,
For your problem, please check SAP note 1083533, please check extract from this note:
If you cannot integrate the required component Support Packages because the import conditions are not met (for example, because you have already installed SAP_APPL 603 although SAP_APPL 600 is the prerequisite), you must update the import conditions. When you try to install EHP3 packages using the EHP installer (EHPI), the following error occurs in SPDA_EHP_INCLUSION.LOG: "OCS package SAPKxxx does not match the current software component vector" Ths system displays the same error message when you try to install packages using transaction SAINT. Proceed as described in Note 1118803.
Solution is documented in the SAP note 1118803.
Thanks
Sunny

OCS package does not match the current software component vector

Hello TECHIES,
Please help me with following error it is very emergency
We had developed an ADD-ON in CRM7.0 and when we try to Install in it into CRM EHP1 server
we get the following error:
OCS package does not match the current software component vector"

"emergency" errors should be handled through OSS/CSN, not here on the forum.
The error message means that the source system has a different support package level than the target system.
Markus

Installing ST-A/PI Addon : "OCS package SAPKITAB9L does not match the current software component vector"

Dear Gurus,
When i try to install ST-A/PI Addon from SPAM and select queue : OCS package SAPKITAB9L does not match the current software component vector
My downloads ;
1 - SAPKITAB9J ==> CSN0120061532_0073055.PAT (ST-A/PI , 01Q_731 , Package Level=0000) downloaded from
ST-A/PI 01Q_731 (INSTALLATIONS AND UPGRADES)
2 - SAPKITAB9K==> CSR0120031469_0081131.PAT (ST-A/PI , 01Q_731 , Package Level=0001) downloaded from
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
3 - SAPKITAB9L==> CSR0120031469_0076956.PAT   (ST-A/PI , 01Q_731 , Package Level=0002)
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
I placed them under EPS and uploaded succesfully when i "Load Packages" from " "from Application Server"
What could be problem ?
Here is system components ;
SAP_BASIS
740
0005
SAPKB74005
SAP Basis Component
SAP_ABA
740
0005
SAPKA74005
Cross-Application Component
SAP_GWFND
740
0005
SAPK-74005INSAPGWFND
SAP Gateway Foundation 7.40
SAP_UI
740
0006
SAPK-74006INSAPUI
User Interface Technology 7.40
PI_BASIS
740
0005
SAPK-74005INPIBASIS
Basis Plug-In
ST-PI
2008_1_710
0007
SAPKITLRE7
SAP Solution Tools Plug-In
BI_CONT
757
0001
SAPK-75701INBICONT
Business Intelligence Content
BI_CONT_XT
757
0001
SAPK-75701INBICONTXT
Business Intelligence Content for Bobj I
SAP_BW
740
0005
SAPKW74005
SAP Business Warehouse
CPMBPC
801
0005
SAPK-80105INCPMBPC
CPM Business Planning and Consolidation
POASBC
100_731
0005
SAPK-10205INPOASBC
POA Shared Business Components

in 000 client but now i am getting DUMP ;
Category               ABAP Programming Error
Runtime Errors         CALLBACK_REJECTED_BY_WHITELIST
ABAP Program           SAPLSTPA
Application Component BC-CTS
What happened?
    An RFC callback has been prevented due to no corresponding whitelist
    entry being configured. The original RFC called function module "RFC_TP" in
    the target system with destination "CALLTP_WindowsNT". The callback called
     function
    module "TRINT_PROGRESS_INDICATOR" in its own system.
Error analysis
    Function module "RFC_TP" was called. This execute an RFC callback via ABAP
    statement CALL FUNCTION 'TRINT_PROGRESS_INDICATOR' DESTINATION 'BACK'
    . This action resulted in this ABAP short dump.
    This action was triggered explicitly by the application in transaction
    "SAINT               " and in ABAP main program "SAPLSAINT_UI".

OCS package SAPKITAC4E does not match the current software component vector

Hello Experts,
I am running EHP4 upgrade on ECC system, I have downloaded files from MOPZ, I got an error message in PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION, error is as follows,
Last error code set: Unable to generate addon queue. Return Code = 1, Reason = "OCS package SAPKITAC4E does not match the current software component vector", check log file 'SPDA_EHP_INCLUSION.LOG' for details
As per the log 'SPDA_EHP_INCLUSION.LOG' it is looking for BBP CRM patches, error message is as follows,
3 ETN490 Use the Add-On installation package "SAPKITAC4E" (type &4"AOI") for Add-On &2"ST-A/PI" rel.&3"01M_CRM570"
3 ETN245 The following import prerequisites of OCS Package "SAPKITAC4E" have not been met:
3 ETN264   In the (alternatively) Requirement set "01":
3WETN491 Required software component "BBPCRM" rel."500" is not installed
3 ETN264   In the (alternatively) Requirement set "02":
3WETN491 Required software component "BBPCRM" rel."510" is not installed
3 ETN264   In the (alternatively) Requirement set "03":
3WETN491 Required software component "BBPCRM" rel."520" is not installed
3 ETN264   In the (alternatively) Requirement set "04":
3WETN491 Required software component "BBPCRM" rel."600" is not installed
3 ETN264   In the (alternatively) Requirement set "05":
3WETN491 Required software component "BBPCRM" rel."700" is not installed
3 ETN264   In the (alternatively) Requirement set "06":
3WETN491 Required software component "BBPCRM" rel."701" is not installed
2WETN543 OCS package "SAPKITAC4E" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251   End of phase: "'Add-on Queue Calculation'"
1 ETN254       End date: "02.08.2011"
1 ETN255       End time: "23:30:08"
1 ETN214 ."**************************************************"
BBP CRM is not installed in our ECC system, I am not sure why it is required.
Can you please advise me how to move forward without installing BBPCRM.
Regards,
Fazil

If someone one found the following errors during SAP ECC6-EHP6 implementation with Software Update Manager:
1:
Error message set: 'Unable to generate addon queue. Return Code = 1, Reason = "Extended attribute STACK_XML_REQUIRED for SAPK-100AHINUI2FND is unknown"
Solution:
Please update the SPAM/SAINT version with latest available at OSS site, then restart the implementation with INIT option.
2:
Error message set: 'RFC error system DEV nr 00 function 'SPDA_READ_NEW_PACKAGES' failed with code 3 key CALL_FUNCTION_NOT_FOUND: Function module "OCS_CHECK_PATH_CONSISTENCY" not found.
Restart the Software Update Manager and SAP instance. If possible then update SAP Kernel with latest available patch, R3trans and tp as well.
Regards.

OCS package SAPKITL437 does not match the current software component vector

I am trying to apply SAPKB70108 in SOLMAN 7.1 ehp1. SPAM=KD70143, got error OCS package SAPKITL437 does not match the current software component vector
Lalit Kumar

I have posted single time but due to internet problem, I clicked two times and the same posted twice.. I want to delete one but haven't find delete option...
Lalit Kumar

Payment Wizard - Series period does not match current period

Hi All,
I've a problem during creation of Incoming Payment through Payment Wizard.
0 payments were added at the end of creation Incoming Payments--> Bill of Exchange using Payment Wizard.
In Non-Included Transactions I can read: series period does not match current period
I've examinated the incaming payment's numbering series and the relate series to document and everything seems ok, so I don't understand the reason of error.
If I try to add the same Incoming payment> Bill of exchange manually in Banking>Incoming Paymenti-->Incoming Payment (without Payment Wizard) it works perfectly!!!
Can you help me?
Simona

Hi Simona,
In step 2 of the Payment Wizard, please check that you have selected the correct series for Incoming Payment at the bottom of the screen.
Hope it helps,
Jesper

Series period does not match current period

Dear Experts...
I got error when update UDF in A/R Invoice form year 2010-11. Year 2010-11 is unlocked and in Document Numbering series it is locked.
Error is Series period does not match current period
How to fix this issue?
Any help will be appreciated.
Regards,
Ravi

Dear Ravi,
First unlock your All A/R document numbring series.
Than go to posting period and unlock you all posting period.
than try and let me know.
Waiting form you reply.
Mangesh Pagdhare.

The publisher of the uploaded package does not match the expected publisher . The publisher for this app is expected

I have a Windows Phone Silverlight 8.1 project that i am trying to publish
The publisher in the uploaded package does not match the
expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
I have the same Publisher Id set in the WMAppManifest file
help me
thank you

Hi kadir u,
>>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
<Identity Name="*******"
Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Version="1.0.0.0" />
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The publisher in the uploaded package does not match the expected publisher.

I have an existing Windows Phone 8 application in which I wish to release an update to. This update includes new features as well as targets the 8.1 platform. Because of an unknown problem with the original Visual Studio project
where the app stopped being able to be deployed to test devices, it was faster to create a new Visual Studio project and copy over the existing code and assets than try and find the issue in the original project. This lead to the publisher GUIDs being different
between the new and original projects.
Now when I try and submit the updated package within the Windows Phone Online dashboard I get the following error message "The publisher in the uploaded package does not match the expected publisher. The expected publisher
for this app is: "CN=0745C81D-D1ED-49ED-A219-C546B5F31DE5"".
I have updated both the WMAppManifest and Package.appxmanifest so that they have the following attributes and information:
Package.appxmanifest (PhonePublisherId="0745C81D-D1ED-49ED-A219-C546B5F31DE5")
And
WMAppManifest (PublisherID="{0745C81D-D1ED-49ED-A219-C546B5F31DE5})
I have then recompiled the app and uploaded and attempted to resubmit the update but I still get the error that the Publisher does not match. What have I missed??

This sounds tricky... perhaps you can do a search in the entire app for the GUIDs and replace them.
Also, you could build the appx package, rename the .appx to .zip, and open it up to see if you can find the wrong publisher id anywhere and it might give you a clue to where to make the change.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Enprise JC error: series period does not match current period

I want to make create invoice from Enprise Job Costing Contract. There are some lines in Contract Detail but I want to process only two of them. I put the amount in Invoice Now, Post Date, and Invoice Due Date.
The invoice is supposed to be from previous posting period (the previous month/year) so I search the correct series number in Invoice No. drop-down list in the Job Costing Contract form. But the available options are only manual and serial number of current period. If I click Process Invoice Now button, I get error message: Error creating invoice: series period does not match current period
I tried to change the settings from Administration > System Initialization > Document Numbering to set the numbering series to previous period but so far nothing changed, and I still can not create invoice.
I currently use SAP B1 8.8 PL 13 and Enprise Job Costing 8.8 (version 8.80.101)
Anybody can help me? Thank you in advance for any good advice.

Hi Sandy,
your SAP support partner will be able to register a ticket on the Enprise Support Portal to have this investigated for you, Enprise do not answer questions directly from this forum.
Having said that... it sounds as though the invoice numbering series you are trying to use is only valid for a specific year. Did you make sure you also changed the Invoice Date (top right side of screen) to be in the same year?
kind regards,
Cathy

Source message Message Type: POR does not exist in software component versi

HI All,
I have a .tpz file exported from an SRM 4.0 PI system which i have imported in SRM 7.0 ECC 6.0 PI.
I have imported the .tpz file through the import through "client" option.
I am able to open all the objects but i am not able to open the Message mappings.....
It is throwing the following error:
Source message Message Type: PurchaseOrderRequest does not exist in software component version xx_xx_PO_PROCESSING, 1.0 of xx.com Check whether software component version xx_xx_PO_PROCESSING, 1.0 of xx.com is in the Enterprise Services Repository. Import this or a newer version if necessary.
This needs to resolved very urgently...
Kindly help...
Thanx in advance..
Nandan

Hi,
I'd say you need to import some other SWCV which has all the IDOC typos you use in your scenario
probably this is a prerequisite for importing your SWCV
I don't think this is related to sp level or anything like that
it's just that SWCV is missing
Regards,
Michal Krawczyk

Eclipse error : The declared package does not match the expected package

I'm trying to setup an Eclipse project on some existing code but I can't get past this error. The source files are in the following directories:
d:\mycompany\coolstuff
d:\mycompany\neatstuff
The source files in the coolstuff directory have a package statement:
package mycompay.coolstuff
The source files in the neatstuff directory have a package statement:
package mycompany.neatstuff
I create a new Eclipse Java project, specify the existing directoy of d:\mycompany. When Eclipse tries to build, it gives the following error:
The declared package "mycompany.coolstuff" does not match the expected package "coolstuff"
I've tried everything I can think of short of modifying every package statement since they seem correct based on the Java documentation. What am I missing?

All the source builds just fine using a command
nd line and a classpath=.\That's meaningless, since classpath=.\ is just setting the classpath to the current directory.
d:\mycompany\coolstuff
d:\mycompany\neatstuff
The source files in the coolstuff directory have a
package statement:
package mycompay.coolstuff
The source files in the neatstuff directory have a
package statement:
package mycompany.neatstuff
I create a new Eclipse Java project, specify the
existing directoy of d:\mycompany.When you use the package statement "package mycompay.coolstuff" Eclipse looks in the directory above mycompany for mycompay\coolstuff\<classname>, and that directory is d:\, not d:\mycompany.
When Eclipse
tries to build, it gives the following error:
The declared package "mycompany.coolstuff" does not
match the expected package "coolstuff"

The declared package does not match the expected package

I was given some Java code that I need to get working and then make some improvements on, but I'm still in the process of learning Java and the IDE Eclipse as well. There is a package called MyGUI and most of the files in that package had the error "The declared package MyGui does not match the expected package MyGUI" as a result of the inconsistent case, so I changed all of the first lines "package MyGui" to "package MyGUI" and this fixed all of those problems except for one.
There is still one file where it gives this error message even though I changed the code the same way I did for the other files. I can't figure why this file is different. I saved it and I also refreshed everything, but it still gives me the error message "The declared package MyGui does not match the expected package MyGUI" although the package is clearly declared as "MyGUI".
Does anyone have an idea of why this would be? I am very new to Eclipse and Java, so I don't really know how to go about solving errors yet.

Forget the IDE until you get a handle on basic concepts like packages and classpath.
The error you're talking about comes when a .java or .class file is not in a directory that matches its declared package.
Let's say that CLASSPATH_ROOT is the only element in your classpath. If you have a class that is declared like so:
package com.foo;
class Bar {}Then, you must have CLASSPATH_ROOT/com/foo/Bar.java or CLASSPATH_ROOT/com/foo/Bar.class.
The language rules for .java files are not as strict as those for .class files, but some compilers may expect them to be the same, and it's a good idea to do so even if it's not strictly necessary, for clarity's sake.
Also, even though Windows' file system is not case sensitive--that is it considers FOO.class and foo.class the same file name--Java is. You probably can't directly rename FOO.java to Foo.java in Windows, as it will say it's the same name, so if you need to change the case, rename it to a different name, than back to Foo with the correct case.
Edited by: jverd on Mar 29, 2009 12:07 PM

JLDAP source from OpenLdap does not match current package

The wiki page for the JLDAP downloads ('LDAP Classes for Java -
Developer Community' (http://developer.novell.com/wiki/index.php/Jldap))
indicates "Source code matching this release is available through the
OpenLDAP Open Source initiative." Unfortunately, the current packages
(which have needed bug fixes) were modified in 2009, but the most
current source on the OpenLDAP site is from 2008. Consequently, we don't
have source that we can use to debug during development, which is
hindering our ability to effectively develop new functionality against
eDirectory. Is there a plan to get the most up-to-date source available?
mkilpatr
mkilpatr's Profile: http://forums.novell.com/member.php?userid=10119
View this thread: http://forums.novell.com/showthread.php?t=413181

mkilpatr;1987221 Wrote:
> The wiki page for the JLDAP downloads ('LDAP Classes for Java -
> Developer Community' (http://developer.novell.com/wiki/index.php/Jldap))
> indicates "Source code matching this release is available through the
> OpenLDAP Open Source initiative." Unfortunately, the current packages
> (which have needed bug fixes) were modified in 2009, but the most
> current source on the OpenLDAP site is from 2008. Consequently, we don't
> have source that we can use to debug during development, which is
> hindering our ability to effectively develop new functionality against
> eDirectory. Is there a plan to get the most up-to-date source available?
Hi,
The source can not be different, because there is only on source
repository and that is OpenLDAP. Even the Novell's libraries are built
from the OpenLDAP Source only. The source changes and bug fixes from all
the JLDAP maintainers (both from and outside Novell) wil be checked in
to OpenLDAP's JLDAP repository only.
-WITH REGARDS,-
*-Palaniappan N-*
palaniappan1's Profile: http://forums.novell.com/member.php?userid=12325
View this thread: http://forums.novell.com/showthread.php?t=413181

SPAM/SAINT - OCS package does not match current software component vector

Similar Messages

Maybe you are looking for