SPAU:No SPAU when applying the package in QAS system

Hello Experts ,
i was applying SAP_APPL in dev system , and SPAU occured . we sent the conflicts to dev team and got all the
adjustments done by them and record that in a transport request . we did not release the transport request from
Dev system.Now i am applying SAP_APPL in my QAS system , but i am not getting SPAU .
could anyone help me to understand why i am not getting SPAU here.
we have not imported the SPAU adjustment to QAS system.
how/where can i find (table entry ) to ensure that i get SPAU in QAS system also.
our patching activity is standstill , any help would be higly appreciated.
regards,
vinaysingh

Hi,
It is not uncommon that you are getting some objects in SPAU in development system but not in quality system. Reasons because: there will be number of standard programs in development system that have been modified but same has not been transported to quality/production system. So, if you are not getting SPAU in quality system then you should not transport SPAU request in quality/production.
Thanks
Sunny

Similar Messages

Why is the Lumia Icon's ringtone lower than when previewing the ringtone in settings/system/ringtone sounds? (The volume is set at 30 in all cases.)

Why is the Lumia Icon's (929) ringtone lower than when previewing the ringtone in settings/system/ringtone+sounds? (The volume is set at 30 in all cases.)

Hello Lena,
Yes, tried all those things.
After going back and forth with Verizon's "tier 2" technical support over the last 2 days, a chat session with Nokia, no call-backs-as-promised by your technicians, then having them reinstall the phone's software -that didn't fix the problem. So they are sending me a re-manufactured replacement phone. But not a NEW ONE, because I didn't realize the problem within 14 days. You see at first, I just figured the phone had lousy volume, until I was previewing ringtones when setting the alarm clock. The phone is about one and a half months old. I have expressed my desire that a NEW phone be sent, but NO says Verizon.
I've spent enough time, in good faith, Verizon would solve this matter, but in the process of their re-installing the software they've screwed up Backup Assistant.
Thanks.

Pkgadd failed when applying the patch cluster

Hi,
When I apply the patch cluster to servers that have been jumpstarted to Sol10U3 and U4, I am getting a package add failure. The only way around this is to add install user in passwd:
install:x:0:1:installpatch:/root:/bin/true
Is there something that needs to be configured to avoid this or is the install user required?
Thanks

See the Solaris FAQ:
http://www.science.uva.nl/pub/solaris/solaris2.html#q5.59
5.59) Patch installation often fails with "checkinstall" errors.
When installing a patch, the Solaris 2.5+ patch installation procedure will execute the script "checkinstall" with uid nobody.
If any of the patch files or if any part of the path leading up to the patch directory cannot be read by nobody, an error similar to the following will appear:
patchadd . # or ./installpatch .
Generating list of files to be patched...
Verifying sufficient filesystem capacity (exhaustive method) ...
Installing patch packages...
pkgadd: ERROR: checkinstall script did not complete successfully
You can workaround this in two ways, one is to make sure that the user "nobody" can read all patch files and execute a "pwd" in the patch directory or add an account "install" to /etc/passwd:
install:x:0:1:installpatch braindamage:/:/bin/true
Installpatch and patchadd use "nobody" as a fallback if it cannot find the "install" user.

Receiving the error 1334 when applying the 10.1.3 update.

I had the same error code when updating on multiple systems on our network. Most (except for 1) of the computers are windows 7 systems. We're using Acrobat X Standard and I was updating from 10.0.0 to 10.1.3. I ran the update on 30 systems and only had issues on 5 of them (1 windows xp). The other 25 system were running windows xp. I can not find any reliable information online on what this error means or how to fix it. I did try a suggestion from another site to try each incremental update from 10.0.1 through 10.1.3, but this failed as well. These machines are spread between 4 different offices and I am hoping there is a solution besides reloading the software from scratch (the disks and product keys stay with the computers).
The specific error I receive says - "Error 1334. The file 'wcfirefoxextn.dll' cannot be installed because the file cannot be found in cabinet file 'Data1.cab'. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package."
I have redownloaded the install package a few times and still received the error. I have also attempted to use the update function within acrobat x.

Hi Swankydope,
This error generally occurs if the source (from where the installation is done) is in incorrect state. For example, if Adobe Acrobat Pro 10.0 is installed from a network location (through Admin Install Points - AIP), then Acrobat Patch 10.1.3 is being installed; but somehow the AIP placed at network is changed/corrupted, then there are chances that this error is seen.
Can you please describe the procedure by which these machines (having this issue) are configured, i.e.
- How Adobe Acrobat was installed ?
- How the patch is being applied ?
- Are there any installation logs available ? (if not, logging can be enabled using : http://support.microsoft.com/kb/223300 : See section : "Let me fix it myself")
- Is the source (from where Adobe Acrobat 10.0 installation is done) in correct state ?
- Has there been any clean-up activity done on the machines where this issue is seen ?
Thanks,

Output Error When Debugging the Package

Hi,
I just created my first SSIS Package, with OLE DB Connection pointing to our Oracle server and using SQL SERVER Destination. When I Debug, I get the following error:
SSIS package "C:\Users\Documents\SQL Server Management Studio\Packageload.dtsx" starting.
Information: 0x4004300A at Load Season, SSIS.Pipeline: Validation phase is beginning.
Error: 0xC0209303 at Packageload, Connection manager "ABCDEF": The requested OLE DB provider MSDAORA.1 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC020801C at Load Season, OLE DB Source [46]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ABCDEF" failed with error code 0xC0209303. There may
be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Load Season, SSIS.Pipeline: OLE DB Source failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Load Season, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Load Season: There were errors during task validation.
Warning: 0x80019002 at Packageload: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "C:\Users\Documents\SQL Server Management Studio\Packageload.dtsx" finished: Failure.
I tried setting the DelayValidation property to True, but still getting same error.
Thanks
Parul

Hi Parul,
Regarding the error “Unable to bulk copy data. You may need to run this package as an administrator”, it is described in the KB article
http://support.microsoft.com/kb/2009672:
On systems where UAC is enabled, when an application (like SSIS) is launched by an account that is a member of the Administrators group, it gets two security tokens, one a low privileged token and another an elevated token. The elevated token is only
used when the application is explicitly run under an Administrator account by choosing “Run as Administrator” option. By default SSIS always uses the low privileged token resulting in a failure when connecting to a SQL Destination.
The solution is launch the tool (SQL Server Management Studio or Business Intelligence Development Studio or DTExecUI.exe or Command Prompt) as administrator.
Regarding the original error “The requested OLE DB provider MSDAORA.1 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode”, it is because Microsoft OLE DB Provider for Oracle has only 32-bit version. To avoid this issue,
you can either run the package in 32-bit runtime mode as you have done or install the 64-bit Oracle Provider for OLE DB.
If you use Enterprise edition of SSIS 2008 or higher, you can also install the Microsoft Connector for Oracle by Attunity:
http://www.microsoft.com/en-in/download/details.aspx?id=29283
Regards,
Mike Yin
TechNet Community Support

Error with Project Parameters when executing the package with dtexec command

Hi,
We have started migrating our SSIS package from 2005 version to SSIS 2012. In SSIS 2005 we were using XML configuration files and executing the packages with dtexec command from the packages folder (without deploying packages to filesystem).
Now in SSIS 2012, we have seen Project Parameters and created couple of package parameters and used those parameters in the package. when executing this package from solution explorer it was working fine but when i try to execute the same package from command
line with Dtexec command, it was showing an error message of 'Not able to map Project Prameters to configurations'.
Could you please give me an idea of how to execute the packages from command line by using dtexex command. basically i would like use project parameters in 2012 similar to configurations?
Thanks,
Venu.

Refer
http://msdn.microsoft.com/en-IN/library/hh231187.aspx
you can pass parameter like this
/SET \Package.Variables[$Package::ParameterName];<value> /SET \Package.Variables[$Project::ParameterName];<value>
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

FCPX: When applying the keyer to green screen, is there a way to change the resulting color from black to another color (cream, blue, etc)?

Currently working on a project where I shot various video tributes in front of a green screen. When using the keyer in FCPX, the resulting image is represented by a black background instead of a green one. I'd like to change that color to blue, tan or something else so that when I apply a picture in a portion of the background, the remaining background looks fine. More specifically, I plan to put images over the right shoulder of each person in the video. The image will only take up about 1/4 of the background and the rest of it currently just looks like a black screen. Thanks in advance for any advice.

Tom now I have another follow-up. So i have the original green screen with the keyer applied which, emptied the background. Now I've applied a color generator below that in the timeline and it generates a color. How do I now go back and add the photo in the upper right corner of the clip? Ultimatly the goal is to have the subject, with the color backdrop and a photo above their right shoulder.

Where to place the class file of the java bean when using the packager

I am using the activex bridge in j2se 1.5.0_06
now i have created the jar file for my bean but where do i place the class file?
i.e the bean..if i keep it in jdk\bin the packager gives me an error..i created a folder in my public jre jre\axbridge\bin and placed the class file there too but even this didnt work
Kindly tell me what is the fully qualified package bean name if i have placed all my files under jdk\bin..

D:\Java\jdk1.5.0_06\bin>packager -reg d:\java\jdk1.5.0_06\bin\PersonBean.jar Per
son
Processing D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\\Person.idl
Person.idl
Processing D:\PROGRA~1\MICROS~2\VC98\INCLUDE\oaidl.idl
oaidl.idl
Processing D:\PROGRA~1\MICROS~2\VC98\INCLUDE\objidl.idl
objidl.idl
Processing D:\PROGRA~1\MICROS~2\VC98\INCLUDE\unknwn.idl
unknwn.idl
Processing D:\PROGRA~1\MICROS~2\VC98\INCLUDE\wtypes.idl
wtypes.idl
Registration failed:
The packaged JavaBean is not located under the directory <jre_home>\axbridge\bin
this is the error i get

When does the new BT Mail system begin?

I'm still on BT Yahoo Mail, and having read the BT information pages all BT Yahoo Mail users should receive emails notifying them of the changes to be made and new BT ID log-in information. I have been using the updated BT log-in page directly from BT.com homepage for months now which works brilliantly. However, I understand that tne new BT mail system should begin very soon and I am getting concerned as I have not received an email informing me of the date of change to the new mail provider or how the changes will affect me.
Is anyone else in the same situation or have you all received your notification emails. If anyone has any further information could you please update me of the latest situation please.
Many thanks and kind regards.
Solved!
Go to Solution.

There are two very strong reasons to use a separate email provider (eg google, microsoft) from your ISP. One is that you will have no email related complications when you wish to change ISP. The other is that many ISPs provide inferior email infrastructure (and from the huge number of complaints about both the old and the new BT email systems you can see BT are no exception to this).
If you change now, you can keep the BT email for communication with BT and the (rare) sites that insist on an email address from a non-free email provider, and forward all your BT email automatically to your new one. Inform you friends of the change of address, and then they should (almost) all be using the new one if you later want to leave BT.
Extremely good advice, I use both Gmail and Yahoo (although Yahoo is awful at present) but I have always been reluctant to use email forwarding for important mail as it used to be so slow and unreliable, perhaps it is better now.

Post processing activities in BW when only the source R.3 system upgrades

We are currently upgrading from 4.6C to ECC 6.0 or ERP 5.0. We have a BW 3.5.2 connected to the existing 4.6C system.
1) Apart from clearing the delta queue and deleting the set-up job is there any other activity I need to do before the R3 upgrade begins.
2) Once the R3 system is upgraded and unicode enabled apart from connecting the two system and restoring with replication, do I need to do any other post processing in BW or R3
3) The plugin levels are different in BW and R3.
   BW -- PI_BASIS     2004_1_640     0006     SAPKIPYI66     Basis Plug-In (PI_BASIS) 2004_1_640
   ERP -- PI_BASIS     2005_1_700     0009     SAPKIPYJ79     PI_BASIS 2005_1_700
   do we need to upgrade the plugin on BW side or this should work fine.
I am trying to find out any pre or post processing I need to do on R3 or BW side for source system upgrade or any points on testing existing BW system with new source system.
Any help/pointers appreciated.
Thanks
-Pratap Gulabrao

Hi,
I think you had pretty much covered most of the preparation work.... Normally we clear up the delta queue, halt all the scheduled jobs prior to the upgrade and after the upgrade, restore the connection, activate all the transfer structures and update rules again and resume all scheduled jobs.
As for plug-ins, this website should provide what you need :
https://websmp201.sap-ag.de/r3-plug-in
Hope this helps.
Cheers,
Gimmo

Patch conflict when applying the 10.2.0.5 Patch set on Windows 7.

Hi everybody.
I have problem when install PSR 10.2.0.5 on Windows 7.
First, Oracle Client 10.2.0.3 installed successfull. I want upgrade from Oracle Client 10.2.0.3 to Oracle Client 10.2.0.5.
I downloaded Database10g PatchSetRelease10.2.0.5 for Microsoft Windows(x32) from E-Delivery Japan Site, then used it installed successfull but new ODBC is not added.
Because of that I used metalink for download 10.2.0.5 Patch 9 and OPatch utility release 10.2.0.5.0.
I extracted OPatch utility release 10.2.0.5.0 zip file directly under the ORACLE_HOME (Old Opatch is been overrided).
Then Opatch aplly command executed for 10.2.0.5 Patch 9 but the error has occurred.
( D:\Oracle10.2.0.5\12332703 is 10.2.0.5 Patch 9 folder path. )
Error Description:
==============
Fatal:OPatch invoked as follows: 'apply D:\Oracle10.2.0.5\12332703 '
information:
OracleHOME : D:\oracle\product\10.2.0\client_3
From : C:\Program Files\Oracle\Inventory
Center Inventory: n/a
OPatch Version : 10.2.0.5.1
OUI Version : 10.2.0.3.0
OUI Location : D:\oracle\product\10.2.0\client_3\oui
Log・File Location : D:\oracle\product\10.2.0\client_3\cfgtoollogs\opatch\opatch2011-05-12_11-04-31am.log
Information:Patch history file: D:\oracle\product\10.2.0\client_3\cfgtoollogs\opatch\opatch_history.txt
Information:Starting ApplySession at Thu May 12 11:04:32 JST 2011
Information:Starting Apply Session at Thu May 12 11:04:32 JST 2011
Information:PatchObject::PatchObject() Patch location is D:\Oracle10.2.0.5\12332703
Information:PatchObject::createPatchObject() Patch location is D:\Oracle10.2.0.5\12332703
Information:PatchObject::createPatchObject() patch location is D:\Oracle10.2.0.5\12332703
Information:ApplySession is temporary patch '12332703' being applied to
OH 'D:\oracle\product\10.2.0\client_3'
Information:Starting to apply patch to local system at Thu May 12 11:04:32 JST 2011
Information:PatchObject::createPatchObject() Patch location is D:\oracle\product\10.2.0\client_3\inventory\oneoffs\5923165
Information:PatchObject::createPatchObject() patch location is D:\oracle\product\10.2.0\client_3\inventory\oneoffs\5923165
Information:PatchObject::createPatchObject() Patch location is D:\oracle\product\10.2.0\client_3\inventory\oneoffs\5923165
Information:PatchObject::createPatchObject() patch location is D:\oracle\product\10.2.0\client_3\inventory\oneoffs\5923165
Information:Patch 12332703 has Generic Conflict with 5923165
Information:Patch 12332703 has no conflicts/superset wiht any other patch processed till now
Information:Checking conflicts for patch: 12332703
Information:Checking conflicts/supersets for patch: 12332703 with patch:12332703
Information:Checking conflicts/supersets for patch: 12332703 with patch:5923165
Information:Patch 12332703 has Genric Conflict with 5923165. Conflicting files are :
D:\oracle\product\10.2.0\client_3\bin\orajox10.dll
D:\oracle\product\10.2.0\client_3\lib\orajox10.lib
D:\oracle\product\10.2.0\client_3\bin\orageneric10.dll
D:\oracle\product\10.2.0\client_3\rdbms\admin\orageneric10.sym
D:\oracle\product\10.2.0\client_3\bin\oraclient10.dll
D:\oracle\product\10.2.0\client_3\rdbms\admin\oraclient10.sym
D:\oracle\product\10.2.0\client_3\bin\orapls10.dll
D:\oracle\product\10.2.0\client_3\rdbms\admin\orapls10.sym
D:\oracle\product\10.2.0\client_3\bin\oranl10.dll
D:\oracle\product\10.2.0\client_3\bin\oran10.dll
D:\oracle\product\10.2.0\client_3\bin\sqora32.dll
D:\oracle\product\10.2.0\client_3\bin\oraxml10.dll
D:\oracle\product\10.2.0\client_3\lib\oraxml10.lib
D:\oracle\product\10.2.0\client_3\lib\orapls10.lib
D:\oracle\product\10.2.0\client_3\bin\oracore10.dll
D:\oracle\product\10.2.0\client_3\lib\oracore10.lib
D:\oracle\product\10.2.0\client_3\rdbms\admin\oracore10.sym
Warning:OUI-67619:Interim patch 12332703 conflict with patch(es) [ 5923165 ] in the Oracle Home
Information:
Patch [ 12332703 ] conflict with patch(es) [ 5923165 ] in the Oracle Home.
To resolve patch conflicts please contact Oracle Support Services.
If you continue, patch(es) [ 5923165 ] will be rolled back and the new Patch [ 12332703 ] will be installed.
Continue?y
Information:Start to wait for user-input at Thu May 12 11:04:36 JST 2011
Information:Finish waiting for user-input at Thu May 12 11:04:44 JST 2011
Information:User Responded with: Y
Information:Start the Apply initScript at Thu May 12 11:04:44 JST 2011
Information:Finish the Apply initScript at Thu May 12 11:04:44 JST 2011
Information:PatchObject::createPatchObject() Patch location is D:\oracle\product\10.2.0\client_3\inventory\oneoffs\5923165
Information:PatchObject::createPatchObject() patch location is D:\oracle\product\10.2.0\client_3\inventory\oneoffs\5923165
Information:Start the Rollback init script for Patch "5923165" at Thu May 12 11:04:44 JST 2011
Information:Finish the Rollback init script for Patch "5923165" at Thu May 12 11:04:44 JST 2011
Information:
Running prerequisite checks...
Information:Space Needed : 444755772
Information:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 12332703
Information:PatchObject::createPatchObject() Patch location is D:\oracle\product\10.2.0\client_3\inventory\oneoffs\5923165
Information:PatchObject::createPatchObject() patch location is D:\oracle\product\10.2.0\client_3\inventory\oneoffs\5923165
Information:Patch 12332703: Optional component(s) missing : [ oracle.rdbms, 10.2.0.5.0 ] , [ oracle.rdbms.dbscripts, 10.2.0.5.0 ] , [ oracle.network.rsf, 10.2.0.5.0 ] , [ oracle.has.common, 10.2.0.5.0 ] , [ oracle.has.rsf, 10.2.0.5.0 ] , [ oracle.rdbms.dbscripts, 10.2.0.5.0 ] , [ oracle.odbc.ic, 10.2.0.5.0 ] , [ oracle.ntoledb, 10.2.0.5.0 ] , [ oracle.ons, 10.2.0.5.0 ] , [ oracle.xdk.rsf, 10.2.0.5.0 ] , [ oracle.rdbms.dv.oc4j, 10.2.0.5.0 ] , [ oracle.sysman.bsln, 10.2.0.5.0 ] , [ oracle.dbjava.ic, 10.2.0.5.0 ] , [ oracle.has.crs, 10.2.0.5.0 ] , [ oracle.has.db, 10.2.0.5.0 ] , [ oracle.rdbms.dv, 10.2.0.5.0 ] , [ oracle.rdbms.plsql, 10.2.0.5.0 ] , [ oracle.oracore.rsf, 10.2.0.5.0 ]
Information:Prereq checkComponents failed. So, checkApplicable returning without execution.
Information:Prerequisite check "CheckApplicable" failed.
The details are:
Patch 12332703: Required component(s) missing : [ oracle.rdbms.rsf, 10.2.0.5.0 ]
Fatal:OUI-67074:ApplySession failed while checking the precondition. : Prerequisite check "CheckApplicable" failed.
Information:Because the system has not damaged, OPatch doesn't try restoring of the system.
Information:--------------------------------------------------------------------------------
Information:The following warnings have occurred during OPatch execution:
Information:1) OUI-67619:Interim patch 12332703 conflict with patch(es) [ 5923165 ] in the Oracle Home
Information:--------------------------------------------------------------------------------
Information:Finishing ApplySession at Thu May 12 11:04:45 JST 2011
Information:Total time spent waiting for user-input is 8 seconds. Finish at Thu May 12 11:04:45 JST 2011
Information:Stack description : oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
Information:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:4451)
Information:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3695)
Information:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5577)
Information:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1719)
Information:StackTrace: oracle.opatch.OPatch.main(OPatch.java:630)
==============
Please help to solve this problem.
Thanks & Best regards.

Hi;
Please see below notes which could be helpful for your issue:
How to find whether the one-off Patches will conflict or not? [ID 458485.1]
Patch Set Updates - One-off Patch Conflict Resolution [ID 1061295.1]
Using OPatch -report option, how to check for potential conflicts during patch apply without Database / Listener shutdown [ID 406037.1]
If its not help than i suggest move your issue to Forum Home » Database » Database - General
Regard
Helios

The MassCompile vi is broken when applying the known fix for Error 1052

There is a fix given in the Discussion Forum for Error 1052 (see Document ID 1RABSOBH)
(The fix is to rename the Open/Create/Replace File.vi to OpenCreateReplaceFile.vi)
Unfortunately when I apply this fix it breaks the built in LabView Mass Compile vi which cannot be updated as this vi is password protected.
I then can't use this Mass Compile tool to update all the vi's used in my TestStand sequences to point to the newly named OpenCreateReplaceFile.vi
Could you give the password for this built in LabView vi or better still, is there a fixed Mass Compile.vi available?
Thanks,
David

Hi David2004
You have to rename your VI while all the calling VIs are open (for this, open the main VI).
Then change the name
Then save the modifications
Then it will work.
Cheers.
Doc-Doc
It would be nice if you take the time to rate this answer
http://www.machinevision.ch

I can not see the InfoObjects when run the Package Import BW Masterdata (BPC 10)

Hi
Someone knows a note to fix this issue apparently is security?
This happens when I login with a user who does not have SAP ALL
With SAP ALL user I can displayed the InfoObjects
Best Regards
Juan Pablo

Hi VaraPrasadraju
Effectively add security objects to a specific role. We test and it worked.
THANK YOU!!!!
Best Regards
Juan Pablo

I get this message when applying the latest software update: The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)

The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)
What should I do?
This is when trying to use the latest software update on my 10.8.2 Lion.
I want to update the latest Safari 6.0.2 and iPhoto 9.4.2 only......NOT Java.

Same error here. The Safari 6.0.2 update is not in Apple's download section. The notification may have gone out before the update was put on their servers, thus causing the download error.

Issue when Calling the RFC from external system

Hi,
I have created one RFC, in which I am using one function module to get the material customer status.
Functional Module name is "QC01_BATCH_VALUES_READ".
When I run this in SAP, it is giving a value for Cusotmer Status. But when this RFC is called from .Net system it is not returning any value for this field.
Even I used a different function module 'CLAF_CLASSIFICATION_OF_OBJECTS' for the same, in this also in SAP it is doing good, but when it is called from .Net, the program is giving dump.
Please help me to resolve this issue
Thanks
Ravi

Hi Ravi,
Issue can be either in the .NET program or in the RFC destination creation.
1)
Check whether data types of .NET program which is calling the SAP function module are correct.
If there are issues with data types, program dont report if you dont so explicitly.
2) Check whether RFC destination you are giving in your .NET program is correctly configured in
SAP , verify by testing the same.
Apart from above two reasons, I dont see any other major reasons for not getting correct results.
Regards
Krishna

SPAU:No SPAU when applying the package in QAS system

Similar Messages

Maybe you are looking for