SPC Chart and Tag Name starting with a Number
On a 11.5.3 (latest build) install, we've found that SPC Charts don't like tag names that start with numeric characters. The data points just don't plot. I can right click and get the data, but there are no points on the chart. All other applets work fine with the same tags. Has anyone else seen this?
Hey Rick,
We did try that and it worked. Also when creating the tags in the UDS Admin, I don't believe the UDS Admin will allow for this scenario (along with funky characters like pipes "|"). However, we are using an alias file (export from Historian into Excel, into SQL, and tweaked via Xacute) where the UDS Admin rules aren't enforced, which might be the inherent problem here.
I just thought that if the applets allowed it, the iSPCChart should also.
Thanks.
Edited by: Ryan Miller on Feb 19, 2008 10:04 AM
I'll leave this thread unanswered for a bit to see if anyone else cares to comment.
Similar Messages
-
Can't open files where the name starts with a number
On our network server, we have some folders where the files are numbered. Example:
1 - Memo
2 - Agenda
3 - Report X
4 - Report Y
5 - Report Z
We have 5 Macs in our office. Everybody can read these files fine except for one person. On her computer she can't open any file that starts with a number and gets the below error message. How do I fix this?
All our Macs (to the best of my knowledge) are setup exactly the same since they were purchased at the same time late last year.Word - Microsoft Support
-
I have tagged quite a few links with "3D" : examples of pages that used 3D in their webdesign, interesting 3D software,3D tutorials... They are all gone!
I have found, for example, the tag "+eclectic" . So extra characters ARE used in tagging.But nothing that has been tagged with a number is in my bookmarks :-(
Maybe Mozilla should warn users not to tag using a number?
Thanks a lot for any help!As best as I can tell, 20ms is around the "sweet spot". I've tried it at 10ms and almost immediately started getting faults. At 20ms it's a bit intermittent- sometimes it'll run fine for several minutes and then get a fault, sometimes not. I've tried running at 30ms as well but it's hard to prove a fault would *never* happen.
Part of my problem is that I don't understand what all needs to happen during this timeframe. Is this an internal loop that's running too slowly, or is my Axis interface code running too slow? Would having too many front panel controls/indicators slow down FPGA access? Should I be using some type of buffer to send configuration data, and keep front panel controls to a minimum?
I understand that front panel controls can use up memory in an FPGA, but I've got enough space, so I assumed that would be OK, but I'm certainly not sure about any of this as it's all quite new to me.
I did go ahead and start a service request, but I noticed it was possibly a 2-day turnaround. I'm hoping someone can give me a hand on the forums as that's both quicker and more easily accessible for future users with similar problems.
Edit: I just did a run at 30 ms, and got the fault about 6 minutes into the run. I've got the RT VI running with the front panel on my computer, along with the Distributed System Manager, and am working on other things while it runs. Not sure how repeatable this will be but take it as it is. -
Column name in the database starts with a number!
Hello,
Recently we updated out database and we changed our tables' and columns' names, I'm developing an adf application with EJB3.0 the question is that the new column names start with a number (eg. 001U_ID), its a kind of encoding the names of the tables so no one can modify the values.
When I create a query on the table it is throwing an exception:
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 'U_ID'.
I think the problem is that the EJB3.0 doesn't recognize column names starting with a number!!! What can I do to solve this issue?
Thanks
ShaheShahe wrote:
the entities are declared using the database tables, I'm using EJBQL to retrieve data from the tables.Can you explain this more. Are you using JPA entities? If so post the definition of the Entity bean and the query you used. -
In the Finder sidebar, under 'Shared', I encounter my TC, as well as another item with a long name starting with 'hp'. 'Get info' shows it to be a 'PC'. However, I don't have a PC. It cannot be my printer (HP), since that has anoter name.
I can not access the item, which has me a 'guest'.
What could this item be? And how to get rid of it?
Many thanks in advance for your help.
DBIt's almost certainly your hp printer and is showing the WiFi adapter MAC address after the HP.
To verify, look at the printer configuration page via Bonjour in Safari. The settings tab shows the Mac address in the bottom left hand corner for my model of HP printer.
I'm sorry but I can't explain why that would show up in the finder. -
"User names cannot start with a number" error while adding a user
Is it possible to use WL Portal 7.0 admin framework to manage users with all numeric
user id ?
I got an error "User names cannot start with a number" while trying to add users
with all numeric user ids. I am using "portalAppTools" web app provided with WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen ? Thanks
ShahThe problem is that when we have user groups starting with a number, then the search
feature doesn't work for user groups (case # 466837 with BEA).
So, which brings me to the following question:
a. Should the search feature work?
b. What is the limitation? I mean, it is designed not to allow user groups starting
with a number. So, there must be a reason for this. So, if we change "disallowFirstCharDigit",
will it have any impacts on Portal?
As an aside, it seems somewhat strange that the Portals can start with a number!
Thanks in advance
Venkatesh
"Ture Hoefner" <replyto@newsgroup> wrote:
Hello Shah,
Search your tools web app for the UsermgmtTools.properties file. In
my
installation, it is at:
D:\bea70sp1\weblogic700\samples\portal\sampleportalDomain\beaApps\sampleport
al\tools\WEB-INF\classes\com\bea\jsptools\p13n\usermgmt\servlets\jsp
It starts with this:
# Messages and other properties used by usermgmt jsp tools
# Name properties - UserBean and GroupBean
disallowedCharacters: ~`!$%^&-*() {}[]|\\/?<>,:;+="'
disallowFirstCharDigit: true
Ture Hoefner
BEA Systems, Inc.
www.bea.com
"Shah Sidi" <[email protected]> wrote in message
news:3db0a001$[email protected]..
Is it possible to use WL Portal 7.0 admin framework to manage userswith
all numeric
user id ?
I got an error "User names cannot start with a number" while tryingto add
users
with all numeric user ids. I am using "portalAppTools" web app providedwith WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen?
Thanks
Shah -
Program with a name starting with '!'
Hi,
I have a problem with a progam. In fact, I want to delete an include but this include is used in a program with a name starting with '!' like
!ZMM_PR_TEST.
I can't open this program or delete it.
What can I do ?
Must I delete this "strange" program or not ?
Thanks in advance for your help...
Best regardsHi Carl,
If you want to delete the program in Any way.. Delete it from the TADIR table...
the symbol " ! " may be some customer name space... Hope you cross check about that name space and
go ahead deleting it from a program accessing the record from TADIR table and modifying the TADIR table.
If something is not happening directly then there is almost a chance to delete the record from the table through a zprogram..
Hope this would help you.
Any question please revert back
Good luck
Narin. -
Is it Possible to create a Report Name starting with M.
HI ,
Just Now I have created a report naming with MYreport. I have expected that system will ask the Access Key since starting letter is M . But System allowed me to create the Report MYREPORT.
As per My Knowledge, Only Y and Z letters for Report. But now how system allowed me to create a report starting With M without access key.
With Regards,
Neptune.MHi,
You can name a program with 'MZ' or 'MY'. Infact all the includes of custom module program will be having names starting with 'MZ' or 'MY'. Try creating a program with other than these combination, the system will surely check.
Addendum:
For example if you create a module pool program with name
SAPMZTEST, then the include names will be
MZTEST_TOP, MZTEST_O01, MZTEST_I01, MZTEST_F01 and so on..
Similarly, for Z function group sap creates dynamically creates the following programs:
SAPLZTEST - Main program
LZTESTTOP
LZTESTO01
LZTESTI01
LZTESTUXX where X containing includes LZTESTU01,LZTESTU02 stands for 01, 02 and corresponds to function module under the function group.
Thanks and regards,
S. Chandramouli.
Edited by: Chandramouli Subburathinam on May 5, 2008 2:35 PM
Edited by: Chandramouli Subburathinam on May 5, 2008 2:42 PM -
Only save queries if name starts with Y
Hello,
How can security be configured so that users can only save queries whose Technical names start with Y?
What authorizations are required and what values should be assigned?
Thanks,
NickHello Jin,
We are on BW 3.5.
Here is the complete set of authorizations assigned to my test user. What I want is for this user to only be able to create queries if they choose to save them with a name starting with Y.
Currently (with the authorization specified below) they can save queries that start with <i>any</i> letter. When I save a query with the description and Technical name of: DELETE_VG15 it gives me two messages for "Authorization check". The first says "You do not have authorization for change" and the second message says: "Query (InfoCube ) was saved" So it does end up saving even though the name provided doesn't conform to what I want in the authorizations.
Hopefully you can help me fill in what is wrong, maybe copy what i have and repost with the values you are using.
<b>S_RFC</b>
Activity: 16
Name of RFC to be protected: *
Type of RFC to be protected: *
<b>S_RS_COMP</b>
Activity: 01
InfoArea: *
InfoCube: *
Name (ID) of a reporting component: Y*
Type of a reporting component: QVW, REP
<b>S_RS_COMP1</b>
Activity: 02
Name (ID) of a reporting Component: Y*
Type of a reporting component: QVW, REP
Owner (Person Responsible) for: *
<b>S_RS_ICUBE</b>
Activity: 03
InfoCube SubObject: *
InfoArea: *
InfoCube: *
I Just found this one as well, and it may be the problem:
<b>S_RS_COMP</b>
Activity: *
InfoArea: *
InfoCube: Z_COPA
Name (ID) of a reporting Component: *
Type of a reporting component: QVW, REP
Thanks!
Nick
Message was edited by:
Nick Bertz -
Trouble when a project name starts with ´@´.
I have a trouble when a project name starts with ´@´. I can´t watch any photo into the aperture browser.
Is that a bug? Any help please?
Thanks in advance.I have a trouble when a project name starts with ´@´. I can´t watch any photo into the aperture browser.
What is your Aperture 3 version? Are you using the latest version? For me projects with '@' in the name can be viewed in the browser; I'd need more information to reproduce that problem on my system.
But I would refrain from using such characters in filenames and library items, like projects and folders anyway.
All characters, that have a special meaning in the Mac OS X unix shell, like '@', '|', '~', '.', `/` may cause trouble when exporting or sharing the files.
Regards
Léonie -
PowerShell add Printer Permissions where the printer name starts with...
I have a printer server that has printers for multiple buildings. All the buildings have abbreviations like "BLD" for example, so my printers start with the same building abbreviations
like “BLD-Printer1”. Is there a quick an easy way to set permissions on printers where the name starts with something like BLD?
I'm a total noob with PS .<o:p></o:p>Just wanted to point out that in addition to using .NET/WMI to enumerate the printers, Windows 8 has a native PowerShell implementation you could use. It supports remote management, so you can even use it from a Windows 8 client to target your Windows Server
2008 R2 instance.
$printers = Get-Printer -ComputerName $printServerName -Name bld*
foreach ($printer in $printers) {
Set-Printer -ComputerName $printServerName -Name $printer.Name -PermissionSDDL #fill in your permissions here
Full description of these cmdlets: http://technet.microsoft.com/en-us/library/hh918357.aspx
Excellent - Just fill in the SDDL.
Does this work on WS2008R2 PrintManager Queues? I find no -SDDL except on WS2012. WS8 is missing this parameter. Is it only available on WS8 Enterprise?
WS2008R2 also does not seem to support this.
Get-Printer and its cousins are wrappers around The Q functions posted above. The API has no security bits before WS2012. Look at the MSDN and Technet articles for this CmdLet and the other "Printer" CmdLets.
¯\_(ツ)_/¯ -
I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
SAXException: PI names starting with 'xml' are reserved.
Has anyone run across a problem trying to parse an xml instance (in this case it's an XSL style sheet) using Oracle's parsers? I'm getting the following sax error message:
SAXException : oracle.xml.parser.v2.XMLParseException: PI names starting with 'xml' are reserved. detailed SAX exception message: PI names starting with 'xml' are reserved.
The code generating this error is:
XMLDocument xml = ParseDocument(xmlDoc, parser);
private static XMLDocument ParseDocument(String documentStream,
DOMParser parser)
XMLDocument returnXML = null;
try
parser.parse(new InputSource(new ByteArrayInputStream(documentStream.getBytes())));
returnXML = parser.getDocument();
catch (SAXException saxE)
System.err.println("SAXException : " + saxE + " detailed SAX exception message: " + saxE.getMessage()); // this is the statement generating the error message
catch (IOException e)
System.err.println("IOEx, Parse failed : " + e);
catch (Exception e)
System.err.println("Ex, Parse failed : " + e);
return returnXML;
Thanks in advance for any help you can provide.
Sincerely,
Timlv_clob is invalid, there are two
<?xml version="1.0" encoding="UTF-8"?> elements, remove one of them.
SQL> DECLARE
2 lv_clob CLOB:=EMPTY_CLOB();
3 ignore boolean;
4 BEGIN
5 lv_clob := '<?xml version="1.0" encoding="UTF-8"?>
6 <!ELEMENT firstname (#PCDATA)* >
7
8 <!-- Element function -->
9 <!ELEMENT function (#PCDATA | noteref)* >
10 <!ATTLIST function xml:lang (de | en | fr | la | nl) #IMPLIED >
11
12 <!-- Element initials -->
13 <!ELEMENT initials (#PCDATA)* >
14
15 <!-- Element lastname -->
16 <!ELEMENT lastname (#PCDATA)* >
17
18 <!-- Element structured-author -->
19 <!ELEMENT structured-author ( (firstname, initials? , lastname , function*) ) >
20 <!ATTLIST structured-author ID ID #IMPLIED anchor:name CDATA #IMPLIED > ';
21
22 ignore := dbms_xdb.createResource(abspath => '/structured-author.dtd',data => lv_clob);
23
24 commit;
25 END;
26 /
PL/SQL procedure successfully completed.
SQL> INSERT INTO xml_tst VALUES ('<?xml version="1.0" encoding="utf-8"?>
2 <!--ArborText, Inc., 1988-2002, v.4002-->
3 <!DOCTYPE structured-author PUBLIC "-//WKB//DTD SL author//EN" "structured-author.dtd" [
4 ]>
5 <structured-author ID="SL3654393">
6 <?Pub Caret1?>
7 <firstname>firstname</firstname>
8 <initials>initial</initials>
9 <lastname>lastname</lastname>
10 <function xml:lang="nl">function description in dutch</function>
11 <function xml:lang="fr">function description in french</function>
12 </structured-author>');
1 row created.
SQL> spool off; -
Migrating from Sql Server tables with column name starting with integer
hi,
i'm trying to migrate a database from sqlserver but there are a lot of tables with column names starting with integer ex: *8420_SubsStatusPolicy*
i want to make an offline migration so when i create the scripts these column are created with the same name.
can we create rules, so when a column like this is going to be migrated, to append a character in front of it?
when i use Copy to Oracle option it renames it by default to A8420_SubsStatusPolicy
Edited by: user8999602 on Apr 20, 2012 1:05 PMHi,
Oracle doesn't allow object names to start with an integer. I'll check to see what happens during a migration about changing names as I haven't come across this before.
Regards,
Mike -
I'm trying to pay for a game, and I went to pay it's asked security questions and I don't remember what I answered and I went to resend code to reset the answer and the email starts with an a and I have no email that starts with an s
See Kappy’s great User Tips.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
https://discussions.apple.com/docs/DOC-4551
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
About Apple ID security questions
http://support.apple.com/kb/HT5665
Cheers, Tom
Maybe you are looking for
-
Adpreclone.pl errors out
Hi Could anyone help me to find solution for java eror while running adpreclone in dbrier where as my adpreclone on appstier runs fine Error - Exception in thread "main" java.lang.NoclassDefFoundError: oracle/apps/ad/clone/util/cloneProcessor at orac
-
HT1414 how to delete a game on an iphone 4s
how to delete games on iphone 4s
-
I can't import my picture from my camera to iPhoto '11
I can't import my pictures from my camera to iPhoto '11 please help me!
-
Downloading Old Dreamweaver Versions - Adobe Dreamweaver CS5.5
I've upgraded computers and lost my old install file for Adobe Dreamweaver CS5.5. I cannot find a place to download it on the Adobe site. I've paid for the software, am the registered owner, and want to get access to the digital downlod for Adobe Dr
-
Object Relational Mapping - How to? - With SQLJ? - What brings the future?
Hi there, we are developing applications for masterdata maintainance and masks with fast user interaction using a two-tier architektur and a layered java application on the client. Currently we are using TOPLink for the ORM stuff. As we need a simple