SPDIF output is disabled when connecting a HDMI device

Hello, hope someone can help.
I've got a Toshiba SAT U500 with Realtek audio driver. I want to send the video to the TV (via HDMI) and still send audio via SPDIF to the digital receiver. By some reason it is automatically enabling HDMI audio when I connect the TV, and on the SPDIF output (icon on Windows 7 -> Control Panel -> Hardware and Sound -> Sound) a telephone sign appears.
What does that telephone sign mean? How to make the system not to disable SPDIF output when connecting a HDMI device?
Thanx in advance!!!

Howdy Gdad_Edw,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides information and troubleshooting tips that can help you resolve the no video issue with your Apple Digital AV Adapter and your iPad.
About Apple Digital AV Adapters for iPhone, iPad, and iPod touch - Apple Support
Troubleshooting
If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
Disconnect and reconnect the adapter from the iOS device and display.
Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
Remove any VGA or HDMI extension cables or converters.
Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
Ciao,
-Jason

Similar Messages

Line Output From Audio Interface Mutes When Connected To HDMI

Hello Apple Community,
As my first post to the community, I would like to shed some light on an issue I have found no answer to on the internet or support lines. I have spent a great deal of time self-diagnosing and over the phone with technical support for all devices in question.
Problem:
I have no sound when connected to HDMI. The problem is not exclusive to HDMI, as I bought two Mini DisplayPort adapters (HDMI & VGA) -- neither of which resolved my issue.
Hardware:
MacBook Pro (Retina, Mid 2012) - Intel i7, 8GB RAM, GT 650M Graphics
Audio Interface - Started out with a PreSonus AudioBox 2-In, 2-Out. Now it's a Yamaha Steinberg UR22 (2-In, 2-Out)
Powered Studio Monitors - Yamaha HS7 (Pair)
External Display - Vizio 37", 1080p TV
At first glance, it may sound like my problem is simply that I'm not set to the correct audio output when I'm connected to HDMI. However, this is not the case. With both audio interfaces, I double-checked that the output did not swap to HDMI when plugging in. Many communities believe this is a ground-loop issue with anything from my interface / speakers, to the HDMI cable itself. When I spoke to an audio specialist from Yamaha, he assured me that grounding issues were not the case. He said that ground-loops will only cause noise (hiss, static, hum, etc.), not a complete mute.
Thank you,
Matthew Morris

Okay, so Steinberg responded after 6 days to set up a call time. Three days after that, I finally received the call. Yes, 9 total days.........
Jeff from Steinberg went over all of my issues and went through a whole diagnosis. At the point where I got rid of the stock Yamaha XLR to TRS and used some unbalanced instrument cables I had laying around, the monitors worked! Jeff and I narrowed it down to either bad cables or (more than likely) bad XLR ports. I believe the ladder because the possibility of receiving 2 bad cables is less likely than possibly a single XLR port having a faulty ground or something--which would lead to the above issues.

Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

Solution may be found if you search in the "More Like This" section over in the right column.

Can not select TV speakers when connected via HDMI

I have a MBP fully updated connected to a Sony TV vis HDMI/miniport. Up until today this configuration was working fine. Suddenly, I can no longer select the HDMI speakers in my audio preferences. They are recognized and appear on the list but when I select them it has no effect. Before today, when the TV was connected the HDMI output would be automatically selected and I could not access the volume control from the menu bar, which is the way I prefer it.
I have restarted with no success in changing this behaviour. If I open/close the lid, the sound goes to the proper settings for about 2s but then the HDMI speakers are de-selected and the built-in speakers are highlighted. I can manually select the TV speakers but the setting has no effect.
However, I *am* getting audio output through the TV but can not control volume from the mac or any app. I slide the volume slider on the menu bar and the audio output does not change. The sound is also playing from the laptop speakers which is highly annoying.

and now there is no audio through the TV at all. TV works fine with other inputs such as PS3. Any help?

Why does my retina MBPro and the projector go blank, when connecting with HDMI? This worked fine until the latest OS and firmware update.

Connecting through HDMI worked fine, until the recent firmware update and the 10.7.5 OS update. Now, both retina display and projector dosplay go blank, with the screen coming back when unplugged from the projector.

Clone your system.
Never apply updates w/o one.
And yes there is a page with all the Apple Downloads to do manually and then you can keep it on hand. Same for the OS X Lion or ML installer - save them before running. Still on 10.6.8 so you have OS X 10.6 DVD.
Combo updates do not do any harm. There could be issues to the drive directory beforehand.
Mac Pro has been shipping with Lion since summer 2011, though you can even now still reinstall iwth 10.6.4+

Troubleshooting of 370 A tektroniks curve tracer. Output get disabled when we increase the current to the device.how to troubleshoot?

Output get disabled for Tektronics 370 A curve tracer when i apply current to the device from curve tracer. Please give me some iea to troubleshoot the problem.

hello,
i don't have tools needed but , i see one thing is that you enqueue
every time you are greater 3 that means about every 2-3 ms so consumer is really sought
is it really what you want ?
may be you want to start on a treshold so you can use a treshold fonction
if i don't make mistake your square is 10 hz and the daq is configured 25000 sample 25000 hz
so you aquire 1s of signal every 100ms , there is something to correct
make tests and tell us
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

ITunes Freezes when connecting ANY iOS device

So, my issue is exactly what the title describes, but let me give some more detail.
I have a MacBook Pro (OSX 10.9.5) that's currently running iTunes 11.4. My issue is that every time I connect any of my iOS devices (or my wife's or friends') as soon as iTunes begins to detect an iOS device, it freezes. The computer doesn't freeze, the device doesn't freeze, just iTunes - as soon as the device name pops up in the upper right corner of iTunes, the program freezes.
This issue did not happen on previous versions of iTunes (I think on 11.2 and earlier), but as soon as I updated, it started happening. For a while, I just kept a previous version of iTunes so that I could keep syncing my devise, but when I got my iPhone 5 (recently) it won’t requires the newer iTunes version, so I can’t keep doing that.
I have tried uninstalling and reinstalling iTunes multiple times with no success. I have tried resetting the devices, making sure all updates are done on all devices, etc.
To be clear, I have tried this with multiple different devices (iPod Touch 3rdGen, iPad 2, iPod Touch 4thGen, iPad Mini, iPhone 5) and it does exactly the same thing with all of them – it does not happen with any of these devices when connecting them to my wife’s PC or my work MacBook Pro. This makes me assume that it is an issue with either my Macbook Pro, or with how iTunes is installed on it.

Alright, here's what I got for you from the console:
10/8/14 7:38:06.415 AM SyncServer[2210]: [0x7fa96b506650] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332201472 bytes free in admin.
10/8/14 7:38:06.417 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2210]) Exited with code: 1
10/8/14 7:38:07.058 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:07.308 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 10 seconds
10/8/14 7:38:15.626 AM iTunes[2204]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:2
10/8/14 7:38:15.627 AM iTunes[2204]: Failed to create replacement string
**repeat previous line 33 more times**
10/8/14 7:38:15.636 AM iTunes[2204]: tid:26c0b - unable to query device capabilities
10/8/14 7:38:15.636 AM iTunes[2204]: Failed to create replacement string
**repeat previous line 83 more times**
10/8/14 7:38:16.614 AM com.apple.usbmuxd[1468]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,98c70826
10/8/14 7:38:17.337 AM SyncServer[2214]: [0x7f9dfbd06750] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332180992 bytes free in admin.
10/8/14 7:38:17.339 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2214]) Exited with code: 1
10/8/14 7:38:17.574 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 10 seconds
10/8/14 7:38:17.854 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:18.456 AM com.apple.SecurityServer[14]: Session 100047 created
10/8/14 7:38:18.457 AM com.apple.SecurityServer[14]: Killing auth hosts
10/8/14 7:38:18.457 AM com.apple.SecurityServer[14]: Session 100043 destroyed
10/8/14 7:38:27.603 AM SyncServer[2217]: [0x7fc1435068a0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332176896 bytes free in admin.
10/8/14 7:38:27.605 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2217]) Exited with code: 1
10/8/14 7:38:28.692 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:28.837 AM AppleMobileDeviceHelper[2216]: [0x10030c760] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:28.945 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 9 seconds
10/8/14 7:38:38.038 AM SyncServer[2218]: [0x7fee62506650] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332176896 bytes free in admin.
10/8/14 7:38:38.040 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2218]) Exited with code: 1
10/8/14 7:38:38.356 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:38.607 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 10 seconds
10/8/14 7:38:39.000 AM AppleMobileDeviceHelper[2216]: [0x10030c760] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:48.635 AM SyncServer[2219]: [0x7fd2bad068a0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332078592 bytes free in admin.
10/8/14 7:38:48.637 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2219]) Exited with code: 1
10/8/14 7:38:49.162 AM AppleMobileDeviceHelper[2216]: [0x10030c760] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:49.284 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:38:49.315 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 10 seconds
10/8/14 7:38:59.418 AM SyncServer[2220]: [0x7fa659506650] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 197332078592 bytes free in admin.
10/8/14 7:38:59.420 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer[2220]) Exited with code: 1
10/8/14 7:39:00.294 AM iCalExternalSync[2161]: [0x7fd62150bac0] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
10/8/14 7:39:00.542 AM com.apple.launchd.peruser.501[173]: (com.apple.syncservices.SyncServer) Throttling respawn: Will start in 9 seconds
10/8/14 7:39:00.576 AM AppleMobileDeviceHelper[2216]: [0x10030c760] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
I sorted through most of the code and I don't think I got anything too extraneous in there nor do I think I got any of my personal info in there. Any help you can provide would be much appreciated. Thanks in advance!

Media Center Keeps playing audio when connected to HDMI

I have LCD TV connected to may laptop.
The media center keeps playing audio sound when the HDMI sound output is enable.
Laptop: CQ35-214TX
OS: Windows 7

This is one of the BIGGEST reasons why I would want to take my PC and chuck it into the nearest heavily traveled lane of traffic and watch it get completely destroyed by any vehicle that runs over it then go buy a MAC. The idiocy involved in doing such a simple task is revolting.
FIrstly, and in no way am I directing my ire at you specifically, I have already performed almost everything you have listed for me to try... PREVIOUS to me posting this cry for help.
Secondly, I included a screen shot of the sound devices in my first post and indicated that my display driver/device is Intel(R) HD Graphics 4000. Beyond that, I don't know what you are looking for.
Thirdly, and most frustrating, the document you told me to "follow every single word of instruction" (which I have previously done) doesn't even tell me to connect the laptop to the TV. It talks about the different kinds of connections but never actually TELLS me to connect the laptop to the TV and WHEN to do it.
When I connected my laptop to my TV for the first time it never tried to load ANY drivers. HOWEVER, it does show "PANASONIC TV" (the brand of my TV) and the monitor type in the resolution dialog. But it also show no other type of monitor.
The biggest issue I can see is that there is NO DRIVER LISTED FOR THE HDTV AUDIO in the sound devices. Therefore how could it transmit audio via the HDMI cable since it doesn't seem to even recognize it?
I am at my wits end. And I have NO INTENTION OF PAYING SOMEONE TO MAKE THIS WORK!!!! There is NO reason why it should not work upon conection of the HDMI cable.
What the hell is wrong with HP (or any other PC manufacturer - and Microsoft, as well) when the simple task of connecting a laptop to a TV is so complex and convoluted. And, by the way, I am an electrical engineer with multiple degrees... And this doesn't make sense to me!!! For pity's sake, can someone please give me a simple solution to what should be a simple issue??!!
Alex...

Playbook Spazzes Out When Connected from HDMI to TV - Help

I have tried this a handful of times before and after OS2 released, hoping the new OS would be the fix. Whenever I connect my playbook by HDMI to my TV, it spazzes out completely. The playbook will open web pages, open and chage settings in the main menu, open applications... It is just doing a lot of "ghost" activity very quickly. I cannot find much info out on the web about similar issues. Playbook never does this in any other circumstances and my TV is new and works fine on other devices. HDMI cable is also new and works with other devices.
I appreciate the help of any Blackberry Gurus out there!

Is your tv grounded properly? Are you using the supplied playbook charger? Or just hdmi when this happens? I know weird stuff happens when using the wrong charger, my wife tried to use a LG charger and it did weird stuff like that. The output was real dirty on a scope.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Hissing sound when connecting with hdmi

Hello,
I've recently bought a new lcd tv (Sony Bravia) and I thought I'd try connecting my MacBook Air with a HDMI cable.
I bought an expensive cable (it was pretty much the only one I could find "there and then") and also bought a "mini displayport to hdmi" adaptor from Amazon (like the one advertised on the Apple store online). I also connected audio (with a standard RCA audio cable) from the out to my amplifier.
Technically, the connection works but there is a hissing sound (a high pitched continuous noise). When I disconnect one of the two cables (ie: HDMI or audio) the hissing sound goes away. And I've tried a different audio cable and the problem is the same.
I appreciate this may be a difficult one to troubleshoot remotely but any insight would be appreciated!
thanks
PS: Front Row looks fabulous on a big display!

One possibility is that you open your computer and the television channel first. To some TV, it's no use. Maybe you can first to open the computer until after the TV showing. HDMI generally doesn't support hot swap. BTW, you can also install a *[usb to hdmi adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]*. So, if it's not OK, you can use the dvi to hdmi converter.
Sometimes, this happens in DisplayPort that have HDMI or VGA. This is from the audio chip and high-frequency sound. en,,it was a hard struggle to get a hdmi life. In this condition, we can use a *[usb to hdmi dvi adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* to make it.

My monitor doesn't show the correct resolution (1920x1080) when connected through HDMI

It only appears 1080p/i, that make the image blury. However, it does work on 1920x1080 when using VGA->minidisplayport. I've tried SwitchResX but I couldn't force the right resolution.
I need my minidisplayport free to connect a 2nd monitor, that got no HDMI connection

Hi, is there any setting on the Monitor for input source, like HDMI, PC, DVR, etc?

Error: 1051203: Single Sign On External Authentication is Disabled - When connecting to Essbase Server

We have installed newly EPM Product suite in Windows server.......After loggin into Essbase Administration Services, on connecting to the Essbase servers, i am getting the below error........"Error: 1051203: Single Sign On External Authentication is Disabled"....because of this i am also not able to configure the Data Source in Planning Application..
Error: 1051203: Single Sign On External Authentication is Disabled

Check the essbase.log, do you see the following when Essbase was first started up.
User Migration to Shared Services Completed Successfully and Refresh from Shared Services Starts
Refresh from Shared Services Completed Successfully
If not you may need to stop essbase, rename the essbase.sec and start up again, check the log for the above.
Cheers
John
http://john-goodwin.blogspot.com/

Wireless Sync keeps being disabled when connecting Blackberry 8900 to DM 6.0.1

Our MD has a Blackberry 8900 on Vodafone (UK), which is exhibiting very odd behaviour when he connects it via USB to Desktop Manager 6.0.1 on Windows 7 64-bit.
Despite enabling Wireless Calendar Sync on the device (and indeed it working), the moment it is connected to DM it shows as disabled and when disconnecting the device it is now disabled on the debice too. In additoin, he then can't accept meeting requests on the BB until a hard (battery removed) reboot.
I've already tried the following:
- wiping the handheld and re-running Enterprise Activiation.
- complete uninstall of the desktop software and associated registry entries and files (as per RIM KB)
It also worth nothing that we use a Hosted Exchange / BES proivder (Cobweb), but they say they have not experienced this issue before and that we are trying to sync against an Exchange 2007 mailbox calendar accessed via Outlook 2003.
Any ideas or thoughts most welcome as I've hit the proverbial brick wall. Thanks,
-David

Hi and Welcome to the Forums!
We have received word that if you are
experiencing this issue that you need to contact your carrier for formal
support and escalation to RIM. I suggest you be gentle yet firm with
them...sometimes, the front line support at carriers doesn't always
understand how the process works. If they tell you that you need to
contact RIM, tell them that's exactly what you are doing...and it is
their (your carrier) responsibility to escalate your case into RIM.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Want to disable when connecting Iphone it goes down to device.

When i connect my Iphone to my dock, if I'm listening to radio or some music and i have visualization on it jumps out of visualization and down to devices. And its no matter where i am.
Where can i disable that. Ive got to know that when having a mac if u uncheck the "automatically sync when this Iphone is connected" it doesn't do it. But how to get it to do it in Vista.
Also if you go into preferences and devices and uncheck "disable automatic syncing for iphones and ipods.
But none of this works.. How can i disable that so if i connec the phone i am the one choosing if i wanna go down to the device manually..

No, I have no idea if it will be changed and Apple has not announced anything.
You can ssend suggestions to Apple here -> http://www.apple.com/feedback/itunesapp.html

Automatically disable auto lock when connected to charging device?

Hello,
I am aware that you can disable auto-lock in the settings by selecting 'never.'
Is there a way the auto-lock feature can be disabled automatically when the iPod Touch is connected to a power source like a dock, car charger, etc?
It's a pain to have to change this setting each time I get into the car, and when I forget, it has the potential to become a safety issue. (Of course, I would never mess with my iPod settings while driving...)
Perhaps a 3rd party app that does this??
I've seen this question posted on various forums, but have never seen a good answer...

Hello Ats65,
Make the pairing again and make the device update with system update
Also check another Bluetooth keyboard if available.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

SPDIF output is disabled when connecting a HDMI device

Similar Messages

Maybe you are looking for