Speaker and headphones are not working

In my new Iphone 4s left bottom speaker isn't working and also the right side of my headphones isn't working, can anyone help?

There is not a speaker on the left, that's the microphone.
As for the headset, have you tried a different headset?
Have you possibly enabled Mono audio? Settings > General > Accessibility > Mono Audio

Similar Messages

  • Internal speakers and headphones are not working

    I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

    Hi,
    It could be either Hardware or Software related, so try the following and let me know.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • MacBook speakers and headphones are not working! Please help.

    MacBook OS X 10.6.8
    2009 model
    I was watching a movie and my MacBook randomly shutdown by itself. I turned it back on and had no more problems, so I restarted the movie. The audio was not working in my headphones. So I tried the internal speakers and there was still no sound. I did a quick google search which led me to trying various options and finally called Apple Support on the phone.
    I've tried resetting my PRAM but it only showed an alternating screen between grey and black. Nothing happened. I also reset SMC but that didn't work either. I have checked everything in system preferences, Audio MIDI, etc. and it all appears to be correct.
    While on the phone we found that when I plug headphones or an external speaker in, it does not show up on the "output" menu under System Preferences > Sound.
    I do NOT have the money to go to a computer store and the nearest Apple Store is 2 hours away. I desperately need help because most of the work I do involves having to be able to listen to sound. Please help if you can. I'm not ignorant when it comes to computers but I'm no genius. If you have any ideas, please be specific. Your help is very appreciated.
    PS. When a speaker is plugged in at first, I hear a little crackling from it. The same happens to what sounds like internal speakers if I start a video.

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Both left speaker and headphone output not working

    I noticed a week ago that the left headphone audio output wasn't working, and shortly after I realized that my left speaker wasn't working either. I thought maybe it was a matter of updating some software, but everything is up to date. Anyone encouter this problem before?

    Solved my own problem,
    System preferences - sound- output- balance.
    Strange thing is I don't recall adjusting those settings. Hope this is helpful to anyone else who has this issue!

  • My speaker as well as headphones are not working in hp pavillion dm4 1101tx series

    my speaker as well as headphones are not working in hp pavillion dm4 1101tx series

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp51501-52000/sp51937.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    If you still have no audio, open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Start-up Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type',  select Automatic and click Apply to save the change.  Then click the Start button.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My headphones speakers and microphone are not working please help

    hi i have had my hp windows 7 lap top for 2 years and never had a problme but recently my speakers and microphone are not working even if i put in my headphones i have installed new audio drivers checked my sound settings and did a restore to a date and a factory reset and still no sound ( my speakers say there working the geen bar goes up and down showing the volume but still no sound) please help me thanks

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

    My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do?  Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone.  I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address.  I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

  • My headphones are not working on my I pod 5 they Work a little but then stop how can I fix them

    My headphones are not working for my iPod 5 they work a little but stop how can u fix them

    first line in return for warranty should be the place one bought the place
    same with a car then you should not be expected to ship it to toyota in japan yourself
    and if you coka cola have an issue you don't have to take direct contact to cola company and the likes...

  • I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

    I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

    Hi there,
    It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    -Griff W.

  • I recently installed vista to my mac (32bit)...my headphones are not working. I can't find the 3.5mm jack that apple suggests using. I have tried installing/unistalling several different audio drivers. Does anyone know how to solve this problem?

    I recently installed vista to my mac (32bit). My headphones are not working on it. I could not find the "3.5mm jack" that apple suggests to "solve" this issue. And I have tried installing/uninstalling audio drivers. Can anyone help?

    you don't need several drivers, you just need the audio driver for your Mac, which you didn't list, but would be Cirrus or RealTek.
    Along with uninstalling programs, go to Dev Manager and uninstall driver, or even rollback driver.
    some people have trouble installing or finding driver that will install.

  • Keyboard and trackpad are not working, Keyboard and trackpad are not working

    I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

    I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

    Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.

  • Savevid and keepvid are not working with os 10.7.3-Is there a fix?

    savevid and keepvid are not working with os 10.7.3-Is there a fix?
    Is anyone else having this problem?

    A massive thanks from me too after discovering the problem when I started work this morning at 2.30am - not something you need that time of day!  Did exactly as written and bingo,  missing tool icons appeared BUT, and there's always a but...
    I have THE SAME problem in Quark with some of the static areas in the measurement (F9) bar. Can anyone suggest what might fix this? I have restarted just ONCE after turning on Extension Manager at start-up.
    Hardware:
    Apple Macintosh MacPro 2x2GHz Dual-Core Intel Xeon
    RAM: 6Gb (667MHz DDR2 FB-DIMM)
    HDD's (internal): 1x160Gb / 1x500Gb / 2x1500Gb
    Software (OS)
    OS: Mac OS 10.7.3 (updated to this 06.02.2012)
    Problem software: QuarkXPress 8.5
    Thanks in advance for any advice / help...
    Paul

Maybe you are looking for

  • How do I select a spy menu from inside an AP div?

    Hi, I'm new to dreamweaver (2nd day) and am having trouble manageing to select my menu so I can assign links to it in the properties section. I can click on the AP div, which I put it in, and I can click inside each menu button and I can click to hig

  • Forms-Connect-with-MS Access

    Can We connect MS Access Database with Oracle Forms 4.5/5/6/6i ? if yes then how ? or Forms support any database except oracle ? regards ketan

  • Multiple Unit of Measure (No Fix Conversion Formula)

    Dear All, Cilnet has given me requirement to book the sales document for the particualr product in unit of mesure 'Nos/PC', and the stock is maintained in Base Unit of Measure 'Qtl' (100 Kg = 1 Qtl). Price is also applicable or calculated on the basi

  • Change position of "document links" in query??

    Hi i've got a question... how can i change the position of "document links"picture in Bex Analyzer? The first two letters are always covered by the document picture.... Thank you Chris

  • User Defined datatypes migration from sqlserver2000 to Oracle

    Hello, Need help on the below for sqlserver 2000 a. Whether the current version of Oracle Migration WorkBench supports migration of userdefined datatypes b. A list (or a doc listing) the limitations of Oracle Migration WorkBench, from the perspective