Speaker Does Not Work when i play music, video o make a call.

When i play my music, video or when i make a call,  in my iphone the speaker does not work. I can make a call and have a conversation when i use hand free. When i change sounds in configuration the speaker does work.

Hello there, Armando.
The following Knowledge Base article offers some practical steps for troubleshooting issues with sound from the speaker on your iPhone:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • The volume in the car does not work when i play music through me iphone but the volume works fine for the cd or radio

    When I use my iphone to play music in the car it does not work but the volume suing the cd or radio is fine

    Hello Vdayal,
    Thank you for the details of the issue you are experiencing with the microphone on your iPhone after upgrading to iOS 7.  I recommend following the steps in the article below for an issue like this.  Step 4 suggests restarting your iPhone, but if you click on the link, it offers the steps to reset your iPhone as well. 
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    Go to settings/music/volume limit tap on that.  Make sure it is set to OFF and when you tap it that the slider is at max

  • IPhone speaker does not work when switching call to hands free option

    having problems with IPhone speaker, not working when switching phone calls to speaker mode, any suggestion?

    Same problem - I was on the phone last night and the speaker switched off and can't figure out what happened. I tried to reset the phone, no sound is working.  I can hear a phone call if I hold it up to my ear. Very frustrating as my phone is less than 3 months old. Tracy

  • My iPhone speaker doesn't work when I play music but when I hold the button for Siri,I can hear the noise it makes. What do I do to fix this problem?

    My speaker doesn't work anymore. I've putten it in rice and it worked for a day the next dayitstoped working. What can I do to fix this problem?

    Contacts and Calendar entries should be synced to a supported application on the computer or a cloud service if using the device as designed.
    Pictures/Videos taken with the device should be copied to the computer regularly, if using the device as designed.
    All media should exist in iTunes on the computer.
    All apps should exist in iTunes on the computer.
    There may be some lost data from apps such as game status, but would you prefer to maintain that data or have a functional device?
    If the issue turns out to be hardware, it is possible to later restore from backup to get put the device back to the same functional state once the hardware is replaced.

  • After the OS 6 update my speaker does not work. My music plays but no sound comes out. Can someone help me with this issue? I currently have the 4S.

    After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.

    try to activate and desactivate the airplne switch a couple of time

  • When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

    When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • Iphone 4 the mike does not work when making a call.  it does work with speaker phone and face time

    Just activated new Iphone 4 and the mike does not work when making a call.  it does work with speaker phone and face time. Any known fixes?

    My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often.  I called her iphone 4 at home from where I work 20 miles away on my iphone 5.  With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries.  This is a 10% sucess rate!!  I also could listen in real time from the wired work phone and the wired home phone.  She turned off 3G mode and it went to "O" mode at  the top left of the screen after the ATT.  In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time.  I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network.  If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring.  If the ring tone does not change after the 4th ring you get voice mail.  If the calling party does not leave a voice message there is never a missed call displayed on the iphone.  If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication. 
    This appears to be related to the time of day and the ATT tower that the receiving caller is using.  Tried other towers and it works in 3G mode 10 times out of 10 tries.  Apple replaced the first iphone 4 with a new phone, no improvement.  ATT replaced the SIM card and no improvement.  ATT so far is clue less.  This has been going on every since we got the new iphones which is 4 months.  The ATT web site also describes this same problem from several years ago.  Has anyone got better information?
    Thanks

  • My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

    My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

    Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

  • My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.

    My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.

    That setting only works for system sounds like push notifications (emails and the like), some game sounds, keyboard clicks and things like that. If you want to mute all sounds you still have to turn the volume all the way down with the volume switch.

  • I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music? Any ideas on how to correct this?

    I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
    Any ideas on how to correct this?
    Thanks-Vitaleyes

    I don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset.  My Blueant T1 does support it and plays the music through the deadset.

  • My sound is not working when i play my itunes, my ringers are fine, how do i fix?

    my sound is not working when i play my itunes, my ringers are fine, how do i fix?

    Here's what hardware troubleshooting suggests:
    iPod touch (4th generation): No audio on FaceTime or video recording
    Verify that nothing is blocking the microphone (located on the back next to the main camera).
    If a protective case is used, try removing the device from the case.
    Try turning the device off and back on.
    If this does not help, restore your ipod "as new device" without using the latest backup, in case it contains corrupt files. Follow this article to do so: How to back up your data and set up as a new device
    If this does not bring back your microphone, contact Apple to get it serviced.

  • HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • Reply to all using ItemReply does not work when specifying messageid

    Hello everyone,
    I am trying to use the ItemReply token to perform a "Reply to All"
    action on a mail item with a known message identifier and include the
    original message text in the response. According to the documentation,
    the call should be:
    ItemReply(7;1;"message-id")
    Still, when I execute this token, apparently only a normal reply action
    is performed because only the original sender is listed as recipient.
    (The message text is properly included)
    However, when I manually select the message in the GroupWise client
    first and then execute the same call without specifying the message id,
    all recipients of the original mail are listed in "To:" as expected:
    ItemReply(7;1)
    Could it be that the "ReplyTo" parameter is ignored or does not work
    when a message id is specified as parameter? (Setting "IncludeText" to 0
    does not change anything)
    Thanks in advance and best regards,
    Peter Hofer

    Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
    According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

Maybe you are looking for

  • Sorting photos in iphoto to find duplicates

    When I transferred my photos from iphoto to my new computer last fall, I did something wrong, and the ones I put on were very low resolution. So I transferred them on again, this time the correct way, but the problem is, I have many duplicate photos.

  • Record Counter in trailer for DMEE 005 Canada

    Hi , We have 2 originator ID for one bank account when we run F110 with vendors with invoices in USD & CAD we have in the same file 2 blocks one with CAD and other with USD we have Header + Detail + Trailer for both The issue we have is with the coun

  • Arabic jsp problem

    Hi All I have problem with arabic encoding in jsp here is my problem I have jsp page and contains textfield user put some text and submit the page this text is compared with other text that read from text file if two texts are equal some message appe

  • PS and Mac

    I know this question has been asked before, but I'm looking for fresh input. I am a PC user. Over the past 7 months, I have been using PS CS4 to create large 36"x24" - 8'x12' paintings in PS. Obviously, this puts a big strain on my PC & am considerin

  • By default collapse all folders in Detailed Navigation

    Hi, Could anyone tell me if it's possible to collapse folders which are build in this manner: Role 1 .. Folder 1 .... Page a .... Page b .... Page c .. Folder 2 .... Page d .... Page e .... Page f .. Folder 3 .... Page x .... Page y .... Page z ect..