Speaker Stands for I-trigue 5600

hey
I just bought I-trigue 5600 system and i was intending to get back speaker stands so that i can have them positioned properly.
Creative sight is not giving me any accessories for I-Trigue 5600 does any one know what are the stand style number of part number and where can i get those from in Australia
Any help will be appreciated
regards

Well i think i have the same problem as you with these exact speakers (i-trigue 5600). I found out it was the volume control not that long ago, so im guessing this is the same problem as you! Try lifting the black turner thing on the volume control away from it and turn it and see if the blue light comes on, mine came on for a second, but the volume control is definitely faulty. If you know of any way to get a volume control this would also help me :-) Peace outChris

Similar Messages

Speaker stands for SBS 560

Does anyone know where I can find speaker stands compatible with the SBS 560?
Thanks in advance!

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Speaker stands for ProGamer G500

Does anybody know speaker stands that are compitable with the Creative Gigaworks ProGamer G500?

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Where to buy Speaker Stands for my Creative Inspire T7900 System in Germany?

Hi,
I'm trying to buy the MT-1200 Speaker Stands here in Germany. Any help where I could get them (even outside Germany) would be appreciated.
Thanks!
htg

Here is what will work using your existing 4-3 cable and an extra 3.5mm cable. First unplug all the cables from the back of your card and your woofer. Then plug your new 3.5 cable (make sure you are using a stereo cable and not a mono one) into the black on the back of your card and the black (rear speakers) on the back of your woofer. Then reverse your 4-3 cable that came with your speakers. Take the 4 side of the plug and use that end on your card instead of the speaker side. With the 4 plugs hook the green plug to green on the card, orange plug to orange on the card and black plug to grey on the card. You do not need to use the grey plug, so just let it hang there or whatever. On the end with the three plugs, on the back of your woofer hook the green plug to green (front speakers), orange plug to orange (center and subwoofer) and the black plug to black (side speakers.) This is the only way that it would work for me. Simply unhooking the grey on the subwoofer and running an extra cable from there to the grey on the back of the card did not work for me. It has to do with the way Creative has the 4-3 plug wired and it combines rear and side speakers. You will notice this if you look at the colored plugs and compare the number of rings on the male plugs; some have two and some have three for the different channels. When I simply run an extra wire from grey to grey it still cuts out half my speakers. The above way I outlined works awesome and gives me true 7.1 sound. Good luck!

Creative MT-1200 Speaker Stands for T7900 (UK)

I have eventually got my T7900 kit but i have found that i need stands for the rear speakers. It advertises them all over the box as the MT-1200 model. When i checked the Creative Shop (UK) it states that they are not in stock (37.8 inc vat). I cannot find them anywhere else for the UK (Amazon, Ebay etc). Anybody got any ideas as to where i could get a pair of speaker stands?cheers Steve

Of course about long ones. http://www.creative.com/products/pro...30&product=955

Availability of Speaker Stand in India

Can anyone tell me if rear-speaker stand for Inspire 5200 5.1 system is available in India? I have searched a lot of place, no one has been able to help me. I think the model number would be MT1200 or MT1100. It would be great if you could tell me a website from where I can buy it online. Thanks.

I also require MT 1500 stands for megaworks thx 550.No one is able to help me in Pakistan. I also went to the creative distributors in Islamabad but they also cut a sorry figure.

I Trigue 5600 Speaker System RMA

Hi, would be grateful for some help please. A couple of days ago my speaker system stopped working. It is within warranty and I contacted the support centre. I was sent a troubleshooting guide which I followed through and still the speaker system isn't working.What I did discover however, is that the power supply unit that plugs directly into the subwoofer is actually working as I could hear it buzzing when I put it next to my ear. Also, it does get a bit warm when it's on.Anyway, I tried to explain that to customer support, and they have sent me an RMA no for the power supply !Phoned up this morning and I'm not getting anywhere. The problem could be either with the subwoofer, or the volume control unit, or failing that the power supply unit. The volume control produces a blue light normally when its turned on, but that isn't also happening anymore. I am from the UK btw and if anyone could help, I would be very grateful. I have also sent numerous emails trying to explain the above. Thanks

Well i think i have the same problem as you with these exact speakers (i-trigue 5600). I found out it was the volume control not that long ago, so im guessing this is the same problem as you! Try lifting the black turner thing on the volume control away from it and turn it and see if the blue light comes on, mine came on for a second, but the volume control is definitely faulty. If you know of any way to get a volume control this would also help me :-) Peace outChris

Still have 6 inspire mt1200 speaker stand adaptors available for trade

I have the 750 Gigaworks Speakers and now have a total of six Creative MT-1200 speaker stands. Only needed four until I broke one of the adapters, so I had to buy two more stands. (You can't buy the adapters separately here in the US)? If anyone out there isn't using the Megaworks/Gigaworks adapters from the stand kit, I would be happy to trade for the other Creative Inspire adapters that came along with my sets of speaker stands. Let me know if anyone has the adapters I need. They are so flimsy it seems so silly and extremely expensive to have to pay $70 plus shipping, just to replace two small adapters. Hope Creative will fix this little problem in the future. luvmyrescuedogsTucson,AZUSAThe 6 plastic adaptors that I still have available, fit the Inspire Speakers. They are the plastic ones that are horizontal and have one hole in them. The other long vertical Inspire Adaptors have already been traded to a forum member from The Netherlands.
I believe he said his Creative speakers were the Inspire 5700sAnyway, if anyone has the ones for my S750 Gigaworks, that I can trade for, please let me know.

First, let me thank the two Creative forum members who were able to trade their extra speaker stand plastic adapters to me for the extras ones that I have. It is very much appreciated. Now, if there is a forum moderator reading this message, then would it be possible to pass along my frustrations on being unable to order these very essential parts from Creative here in the US? Surely, I can't be the only person who's metal speaker stand has fallen over and broken that little plastic adapter. These stands are very prone to tipping over. If nothing else, why not make that adapter out of metal? When ordering our stands, why not let us just buy the adapters that fit our particular speaker, instead of giving us extras for two other models? These speaker stands are very overpriced and it seems wasteful to have to junk them because of the weakness of a little plastic part or to have to buy extra stands just to get the part needed. luvmyrescuedogs

DDTS-100 + i-Trigue 5600 + CH-DVD 462 center channel issue? Please help...

Hi there,
I'm having some problems with this setup.
My DVD player is set to RAW output.
All cables are connected properly (checked, double checked)
When playing most 5.1 content (Dolby Digital track from DVDs) surround works perfectly except for the center channel. It's completely deaf. If I set the decoder to Stereo output, it works, so I know it's not the speakers. I tried some tests (7.1 THX Optimizer tests present on some SW DVDs) and the center channel works here (but the other ones are sort of messed up), so I assume it's not the decoder either.
I tried the center/sub switching cable that came with my last speaker set, and though it does switch the channels (I can hear mumbling dialogs in the sub channel) the center channel remains deaf.
So I know that the sound actually makes it out of the DVD (RAW is RAW) to DDTS-100 and from DDTS-100 to the speaker set (yep, the signal's here but I can't hear).
I should mention that I used competetive speakers before and had a similiar issue with the subwoofer channel - it made sound only for the LFE DVD channel as those speakers were not doing subwoofer channel computing (AFAIK Creatives do (bad bad bad bad)), but I assume DDTS and i-Trigue 5600 are supposed to be compatible...
I'm completely puzzled. Any suggestions?

shin8,
Are you getting proper output if you use the "TEST" button on the remote control?
Daniel

Problem with I-trigue 5600 . Please help!

hi,
My I-trigue 5600 worked perfectly for over 4 years. Buy recently, my rear right channel stoped working I 've tried everything : all satellites work poperly,drivers are ok, I tested it on 2 computers. There is still the same problem. Unfortunately Creative dosn't have after-guarantee service.. So, I tried to open subwoofer, but the inerity is too complicated with many areas flooded with glue or isolation. I tried also to buy another subwoofer / i believe it must have small damage , but the rest of speakers work great and the voice of subwoofer is good as well/ but there is problem with buying a subwoofer separately. Becouse there are only auctions on net.
So , what I supposed to do? Does Creative have separated spare parts to my subwoofer? Can I buy another subwoofer anywhere?
Can I replace my sub to similar from another speakers system and which one would be suitable.
I don't want to change my speakers. They are the best for me, but defect of one chanell is annoying. Really.
I wanted to buy x-fi elite pro ,but now it's pointless.
Please help me
Despere Makary

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

Trouble with I-Trigue 5600

Hi,
I have bought an I-Trigue 5600 sound system 3 days ago to connect to my onboard CMI 8738 6CH sound card, but i have notested since i installed it that the Center Speaker doesnt work well and only produces noise. Verifyed cables/connections and its all ok. I have also notested that Center and Subwoofer share the same channel, but the subwoofer seems to be working fine. Then i decided to try this speaker somewhere else and it was working as well.
If i enable the CMSS included on I-Trigue 5600 the Center speaker starts working and the system works perfectly. However, as far as i could get from the short manual creative sent me CMSS should only be used when listening to external devices such as TV sets, game consoles, etc.
I was just wondering if someone could give me a hint on this problem to help me solve this or to point me if a new sound card would kill the problem.
Note: I can't find this audio system?s on the listed support devices, what makes me impossible to get in touch with Creative support directly...

Lovepeaceguru,
If your TV is using RCA connector, you need to get a dual RCA to stereo minijack(3.5mm) cable. Have the RCA end connected to your TV and stereo minijack end to the subwoofer audio input(FRONT). Next, have the switch behind the subwoofer slide to 2CH->5.1 upmix.
Jason

How to connect the I-Trigue 5600 to a DVD player???

I got a set of I-Trigue 5600 and thinking of connecting all 5 speakers and woofer to the back of DVD player to get the surround effect when watching DVD. The problem is I can just plug all 5 speakers to the back of the DVD player but how can I connect the sub-woofer to the DVD player as there is no cable to connect them together? Is there some sort of cable or adapter I can buy to connect them together? Thx in advance for any help!!!

have you tried that setup already?
my guess is that the subfrequencies are still combined with the front channels, and if I correct, your speakersystem will redirect them to the sub. just give it a try.
regards

OT: Monitor/Speaker Stands

Hi guys,
I am really sorry for the OT but I am not sure who to turn to . I am looking into buying stands for my monitors and was wondering if anybody came across anything that might fit my requirements while surfing the net and would care to share links -- my current ones are soo unstable my heart is skipping a beat every time somebody passes by them with my monitors on them . Price is really irrelevant; what I am looking for is 35-36', metal, preferably four post but other configs are also welcome as long as they are stable, fillable is also prefered. They should be able to supoprt ~19kg/40lbs(for a pair of Dynaudio BM15A's), they will be on a thick carpet so spiking is a plus but not a must since the floor under the carpet is abrand new hardwood and will probably add coasters underneath :-| ... The main thing is stability. My current ones are 36' Bello's and at that weight/height they are no good (they were awesome with the Event 20/20bas).
Thank you very much in advance for all your help! I really appreciate it.
P.S. Just aquick note -- sound anchors are ...uu...well... awesome but ~$800 quote (before shipping) ... still debating... hence my current search for other options.
PPC G5 Dual2ghz Mac OS X (10.4.8) Logic Pro 7.2, MetricHalo ULN-2, Dynaudio BM15A
PPC G5 Dual2ghz Mac OS X (10.4.8) Logic Pro 7.2, MetricHalo ULN-2, Dynaudio BM15A

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

Speaker Stands MT-1100

I have these stands for my Inspire 5.1 Digital 5700 speakers and inavertility, knocked one of the stands over and it broke/snaped the plastic bit that slots onto the top of the metal pole and slots onto the rear satlite. The speaker still works. I have tried emailing and phoning Creative each time and no response!!! What can I do? Cheers Darren

No response is unusual. Were you using the website to contact them? Did you get the automated email reply (if i recall correctly you should do). I wonder if this is the same one as was included in your speakers? It says it is the adapter included, but doesnt list your speakers. My guess would be it is what you need, but hopefully someone will confirm this before you buy.

Need recommendations on a speaker stand

Alright, so I've had the unit for about a month now. In some ways, I'm totally delighted with it. There are certain songs where this thing just sings. Anyone who wants to know how perfect this things sounds when it's at its best should give a spin to Another One Bites The Dust by Queen.
On the other hand, if I had to choose, I guess I'm one of those rare individuals who'd prefer a more highly detailed treble to the (admittedly quite clean) thump of the Hi-Fi. Since the EQ settings on the iPod suck from that perspective, the best way to get adequate treble performance is to connect another device which gives greater EQ control.
That being said, I'll be damned if I don't cash in on the "ecology" of it all and use this thing with my iPod. Which means it comes down to placement. In particular, I'm hoping someone out there can recommend a speaker stand suitable to a person with my predilections.
I'm thinking something tall, but solid and sturdy, and something that stands alone, directly on the floor. But I'm not an "audiophile" (or whatever), so I don't know technically what it is that I'm asking for,
Maybe one of you out there does.
Give a shout if you can help. Thanks in advance..
Windows XP

Hi,
There are plenty of speaker stands offering in the market, my suggestions are:-
1. As normally, audiophile speaker stands are in pair, so it is not easy to buy just one, unless you manage to get one, otherwise, see whether you will find a stand for turntable, but which may be quite expensive.
2. I suggest that you go to the furniture shop instead, most of the stands there are made in Wood, which is a good material of iPod HiFi then "Metal", wooden stand makes the song (from digital music files) sound a bit "warmer".
3. The stand must be heavy and solid (but with no wheels)
4. Buy 3 pieces of cones (again I prefer wood then metal), put them between the surface of the stand and iPod HiFi, make sure with the spike direction points to the surface of the stand.
Just in case you do not understand of what speaker cones are
http://www.uhfmag.com/MiscAccessories.html

Speaker Stands for I-trigue 5600

Similar Messages

Maybe you are looking for