Speaker volume too low on 3GS - any way to increase it?

The speaker volume is too low on my IPhone 3GS. Other than the volume control is there any other way to increase it?

With volume control do you mean the buttons on the side of the phone? or in settings? When playing something on speaker and i want it louder, I just click the up button on the side of the phone.

Similar Messages

  • HP Pavilion DV6 Notebook Speaker Volume Too Low

    I have all speaker/audio settings everywhere set at maximum, but the speaker volume I get when I play any kind of audio or video feed from anywhere is way too low. (If I plug external speakers into the headphone jack, the volume is much better.) I've seen all of the posts where the solution was to do something on the "Enhancements" tab in Playback Devices, Properties, but I don't have that tab on my system. When I go into the Configure option and do the audio test, the volume there is great! I've also checked for updates on my audio drivers and the results have come back saying I have the best version already.
    I've been putting up with this for a long time, but I'm really tired of having to plug external speakers in when I want to watch a video or listen to streaming music. I'd appreciate any suggestions (other than the one involving the "Enhancements" tab that I don't have) that might help fix this problem!

    Hello @Lagil ,
    Welcome to the HP Forums!
    I understand the audio appears to be way too low. I will do my best to help! First, please provide the following information and try the following steps:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    5. What steps have been attempted from the following thread, and what were the results: Troublesho​oting Guide: Audio does not Work after a Certain Period of Time
    Thanks!
    Mario
    I worked on behalf of HP.

  • E51 - speaker volume too low.

    Hi All, I have an E51 and the problem I have is it's so hard to hear anything.
    I have to press the handset into my ear and place the hearing area directly over my ear .
    Volume is already on max when I press volume up button on the right side of the phone,
    or right on the navigation button during call.
    and I've upgraded to 3xx, but it still is low!
    Too many friend have the same problem.
    Please Help......

    I am sure the warranty on your phone is expired and you don't really care. I also know your intentions are genuine and you mean well. 
    However, discussions involving the disassembly of phones is expressly prohibited by Nokia because it may result in other users voiding their warranties. 
    Don't take this personally because I agree with your post but it may be removed by the moderators in the morning.. 

  • I have a G71-340 US Notebook. Speaker volume too low to hear turned up to full volume.

    On my G71-340 US Notebook I have the volume turned up to max and yet the speakers are so low I can barley hear them. Is there a software update to fix this?

    *************************TRY THIS BEFORE DRIVER RE-INSTALLATION ********************
    (It's an easier first solution, and It increased my volume, whereas driver re-install did not)
    From Delilah M. on Amazon.com and her review of the G71-340us, Thanks Delilah!
    CLICK on the Windows START Button
    In the search box TYPE "Manage Audio Devices"
    in the results that appear, CLICK on "Manage Audio Devices"
    in the window that appears CLICK on "Speakers and Headphones" - this will highlight the "Properties" button
    CLICK on the "Properties" button
    in the window that appears CLICK on the "Levels" tab at the top, make sure the "Speakers" and "PC Speakers" are at 100%
    CLICK on the "Enhancements" tab at the top
    CHECK the "Loudness Equalization" Box >>>>>  THIS IS THE SETTING THAT WILL BOOST THE VOLUME <<<<<
    CLICK on the "Apply" button
    CLICK on the "OK" button, your settings will be applied and the box will close
    in the remaining open window CLICK "OK" to close the box, and you should be ready to go.  
    Thanks again to Delilah M. for her solution.

  • The Volumn is too low is there a way to increase it?

    The Ipad volumn is okay if you are sitting alone in a quiet place.  I brought my Ipad to work and just with a few people talking it seemed as though there was no sound.  I was trying to show off and I didn't make a good impression, because no one could hear it.

    volume is less, i agree.
    there is a equilizer in settings. try changing it, that will bring a slight change in the volume output.
    Regards,
    Ranjit

  • Siri volume seems low - any way to increase it?

    I just got a new iPhone 5 today and am trying Siri for the first time. It seems to work ok, but the volume of Siri's voice seems quite low to me.
    The speakers on the iPhone 5 itself are ok because I can play music in iTunes very loudly, so it's not the general volume settings or the speakers. It seems to be just Siri's voice.
    Is there any way to increase Siri's voice volume?
    Thanks,
    doug

    Never mind. I see. Siri simply has it's own volume and you can adjust it while in Siri itself. It was set low by default.
    doug

  • Pavilion g6-1322tx, suddenly volume of speaker turned too low (not mute). system & player volume max

    Hello,
    My hp notebook pavilion g6-1322tx just working amaizing and I'm so happy with this device. But suddenly oneday when I was watching a movie in VLC player, I maximized the volume of player and  system (Windows 7 64-bit) and then after few minutes suddenly volume of speaker turned too low like 1%!!!! Headphone working just fine and loudy. I had already tried to update IDT driver and it's not fixing my problem.
    Please please gimme a solution. Thanks in advance.
    Regards,
    M. Rony

    Hi
    Please try doing a system restore to the date where unit was working fine.
    Aslo update the Bios on the unit.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • My loudspeaker are very low (switched to max) any way to increase the volume. (IPad 1)?

    are very low (switched to max) any way to increase the volume. (IPad 1)?    [email protected] 

    Never mind. I see. Siri simply has it's own volume and you can adjust it while in Siri itself. It was set low by default.
    doug

  • My speaker volume turned low

    hi,
    pavilion dv6 3121.
    I got my notebook months back.
    Had password prob, I had to format it.
    Since the format I can't use de finger print feature again, my speaker volume turned low even though I downloaded necessary drivers from Hp.
    I am so concerned abt de speaker cos I love virtual dj and playing other media.
    Pls help me

    fantastic2m wrote:
    Hello sir.
    My product is pavilion entertainment notebook.
    And now after you replied my first complain I have put the finger print issue behind I have bug still with my sound.
    I installed the sound driver as its too low and downloaded IDT SOUND DRIVER found in de driver download section.
    But dis dis not solve the problem, it only got the volume just one inche louder and I tried RELTEK sound DRIVER and again this one did not change any tin.
    U made mention of MSUAA what's dis about? And can it increase my speaker sound?
    Pls?
    Microsoft UAA Bus Driver for the audio chip integrated into your systemboard can be found at the microsoft update website. It is required as part of the operatng system.  No, it won't increase the sound level your notebook is capable of. If you desire more volume then I suggest that you purchase an amplified external sound system (Creative is a decent brand) to plug into the audio out jack on your notebook.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I cannot create a catalog because everywhere I try on my computer, it comes up with cannot Lightroom cannot create a catalog on network volumes.  And is there any way to contact Adobe directly?  Would you be able to give me a phone number and/or email add

    I cannot create a catalog because everywhere I try on my computer, it comes up with cannot Lightroom cannot create a catalog on network volumes.  And is there any way to contact Adobe directly?  Would you be able to give me a phone number and/or email address?@@

    The short and direct answer to your question about catalogs on a network drive is that you can't do that. The catalog must reside on a local drive.
    Here is a link to a list of telephone numbers. Choose one that is appropriate:
    Adobe Connect Support phone numbers

  • Alarm volume too low - iPhone 4S / iOS 6.1

    Hi,
    I use the standard iOS alarm, and put my phone into DND mode overnight (manually).  The alarm still goes off in the morning, but the volume is inconsistent, even though I set the Ringer and Alerts volume to the max.  I have vibration turned on as well, and it actually saved my bacon this morning, as the alarm volume was VERY low.
    I usually listen to podcasts before I go to sleep, but always do the following before going to sleep:
    Unplug headphones
    Return to the home screen
    Go to settings to manually turn on DND mode
    Return to the home screen
    Max the ringer volume with the volume + button
    Plug in the charger and hear the charging chime (quite loud)
    Lock the screen and hear the lock sound (again, quite loud)
    Yesterday the alarm volume was about half.  This morning it was at the lowest volume.  Seems inconsistent.
    Anyone else havuing this problem?
    Thanks,
    Todd

    Update to previous post:   The speaker volume was low before updating to 6.1.3.  I don't remember it ever working well.

  • I updated to iOS.5 and all of my gamecenter friends and stats are gone.  The gamecenter games have been wiped clean too.  Is there any way to restore?

    I updated to iOS.5 and all of my gamecenter friends and stats are gone.  The gamecenter games have been wiped clean too.  Is there any way to restore?

    Have you looked on all the pages of your iPod?  Have you looked in all your folders?  Have you you tried finding the apps using the iPod's search page.
    PS: Offering points in advance is a violation of there terms of service for this forum.  Perhaps it's why you have not received any other answers so far,

  • Any way to increase audio level of your movie?

    I've uploaded a taped video into iMovie and when I play it back, the volume level is too low (I can hear it but it's not loud). I've increased the system pref vol, the vol level, and the volume level in iMovie so everything has been turned all the way up.
    I saw where you can extract the audio. What can you do with it when you extract it? Incresase it? And if you can increase it, how would you add the audio back to the movie?
    What I want to know is, is there another way to increase the volume if you've turned up all the computer volume controls and it's too low?
    Mark

    The best place to increase / adjust audio levels assuming the source video footage has something to work with is in the video editing app. Have you tried posting this question to the iMovie forum?
    If your iMovie has low audio levels to start with then this will also be reflected w/in iDVD if no adjustments are made beforehand. Hope this makes sense.
    Also check in the iMovie Help Menu if you haven't already:
    I can't hear the audio in my movie
    If you can't hear some or all of the audio in your movie, here are some things you can check:
    Make sure your computer's volume is turned up. Use the speaker controls on your keyboard or the volume slider in the menu bar.
    Use the volume slider below the iMovie monitor to increase the movie volume.
    Make sure the audio checkbox is selected for the track you want to hear. The audio checkbox is to the right of each track in the timeline viewer.
    If the audio checkbox is selected, then choose View > Show Clip Volume Levels and see if the audio levels for the tracks are set to a level that can be heard.
    Making your movie louder or softer
    If you find that all or part of your movie is too loud or too soft, you can adjust the volume of your movie in the timeline viewer. You can increase or decrease the volume of the entire movie or just specific audio clips. For example, at a certain point in a video you might dramatically increase or decrease the volume of accompanying music.
    IMPORTANT: These instructions are for setting the volume of video that people will hear as they play your movie. If you only want to adjust the volume of your computer's speakers, see "Adjusting the volume of your computer in iMovie HD" below.
    To make your movie louder or softer:
    Click the Timeline Viewer button (shown above).
    Select the clip or clips whose volume you want to change in the timeline viewer.
    Tip: To learn how to select multiple clips, see "Selecting clips" below.
    Click the clip volume button (shown below), and then drag the slider to adjust the volume.
    Tip: You can also type a new percentage in the field next to the clip volume button to adjust volume.
    You can also make finer audio adjustments within a clip. For more information, see "Fading audio up or down."
    Message was edited by: SDMacuser

  • Any way to increase font size in RoboHelp UI?

    Hi. Is there any way to increase the font size of the text in the RoboHelp (11) UI itself, that is, for example, the items that appear in the Project manager, Topic List, Single Source Layouts, and other panels?
    I have my monitor set to optimal resolution, but this seems to cause this text to be too small for comfort. Is there a way to increase the font size from within RH? If not, is there a Windows-level change I can make?
    Thanks!

    Thanks, Peter.  Yes, that's what it appears to be.  So, in messing about with the screen resolution and text size settings on my new Windows 7 machine, I somehow irritated RoboHelp.  This is what it looks like:
    I got responses from Adobe person assigned to my bug request.  He said all was OK on their side.  He said to try to change the Custom DPI text size for my machine, but that did not change the RH display, only the toolbar and pod headings.  He suggested I uninstall then reinstall RH 10.
    I also asked what the difference was between the RH source files that present the toolbar and that retrieve the project files as listed (includes the Single Source Layout pod entries also, though).  We'll see.
    Have a feeling I'll have to reinstall.
    Thanks for all your help.
    Susan

  • Any way to increase BIS polling speeds?????

    Is there any way to increase the polling speed of the BIS for Earthlink? I have a mindspring email account (Earthlink) and it doesn't get pushed instantaneously to me. It usually just pulls a group of emails every 15 minutes or so. My other email account pushing to my BB Tour from my GoDaddy accounts come right away. Help anyone??

    No, there is not.
    A 15 (roughly speaking) cycle is routine on POP accounts. You can't change that. If the RIM servers find new mail, it reverts to 2 minute polling for a couple of cycles and should it find new mail yet again, retains that 2 minute polling cycle until which time it doesn't find new mail waiting, and then reverts back to the 15 minute cycle.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for