Special G/L indicator for down payment request F-47

Dear all,
I try to define a new Special G/L indicator for down payment request F-47, and I create it as Special Indicator for down payment/down payment request as Noted item, but the system gives me the error
Special G/L indicator F is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
System Response
The entry is not accepted.
Procedure
Enter an allowed special G/L indicator or initiate a change of the default settings.
PLease advice what to do

F-47 is for Vendor down payments.
Have you created your special GL Indicator for Vendors or Customers?
Please check the account type of the Special GL Indicator.
Rgds
Murali. N

Similar Messages

  • New special G/L indicator for down payment when doing billing

    Dear Master,
    As you know, when create down payment invoice by VF01, system choose default special G/L indicator F. Now I would use new special G/L indicator for this transaction.
    The reason I must change is when you do cancel down payment invoice, the accounting document of cancel down payment will not have any lines items so I have to change with hope the cancel down payment will contain lines item as normal cancel invoice.
    Is there anyway to do that? I highly appreciate your support!
    Best regards,
    Nguyen Pham.
    Edited by: Nguyen Pham on Apr 20, 2011 9:29 AM

    Dear buddy,
    Thank for your support.
    I have other concerns belong to cancel down payment request. As you know with notes item, cancel of notes item will not have any lines in accounting doc. Now I would have lines detail inside so Is there anyway to do that?
    Best regards,

  • Clearing customer Items with Special G/L Indicator 'A' (down payment)

    Hi All,
    I've to clear two items of a customer by t.code F-32:
    Both items, that I dysplays by t.code FBL5N (u20AC 20.000,00 and - 20.000,00), are with Special G/L Indicator 'A' (down payment).
    Only the first one contains a 'tax amount' equal to 4.000,00.
    When I process the open Items of the customer by t.code F-32, I expect to see the two items as follows
    20.000,00
    - 20.000,00
    Instead, SAP displays as follows
    24.000,00
    - 20.000,00
    So, I can't clear them as 24.000,00 is not equal to 20.000,00
    Could anyone tell me ho to solve?
    Thanks

    Hi Maurizio,
    first of all, thanks for your answer.
    I've checked the tax category in the G/L account master data of the special G/L
    account used for down payments (A). Tax category is equal to '+ '.
    According to this setting, I posted a customer credit memo as follow:
    Item 01; posting key 11; Customer account XXX; Amount 24.000,00
    Item 02; posting key 09; Customer account XXX; Special G/L Indicator A; Amount 20.000,00 (tax code 20%)
    Item 03; posting key 40; Debit tax account; Amount 20.000,00 (tax code 20%)
    Now I've to clear the item 02 of that credit memo. When I try to do it by t.code F-32, SAP displays the amount 24.000,00 (with tax amount) and not 20.000,00.
    Clearing that item, the system create a automatic posting for tax account of 4000,00.
    This is my issue: SAP shouldn't create this posting for tax account.
    Thank again.
    G.

  • Dimension 1 Cost centre field is not able to edit in Incoming payment for Down payment Request

    Hi Exports,
    I am facing an issue on selecting Cost centres in Incoming payment screen.
    Issue: While I am booking the payment entry for Down payment request, I am not able to select first Dimension cost centre in Incoming payment rows for down payment request document, the Second dimension is able to select and update. the field is in non-editable mode (only on specific document row)
    Setup:
    1. Two Dimension are enabled
    2. In Separate Columns - Both Cost Centres are in separate column
    The above issue is only for Down payment request, for other documents (Invoice) I am able to select and update cost centre
    Please find below snap shot for reference
    Kindly check and let me know the solution
    Regards,
    Kiran

    Hi Gordon,
    Thanks for your reply.
    Yes agree, The Down Payment request is not a financial document but the Cost centres are able to select in Down payment request rows, no issue at all in this case.
    In Incoming payment screen it is necessary to select Cost centres because it has financial implication using down payment request with related to currency difference or Bank charges (both are Expense accounts) and DR assignment is mandatory in this case.
    And you have to notice one thing in above issue, I am able to select second dimension cost centre and it is allowing to edit and update the cost centre on respective row. Only issue is specific cell (dimension 1 cost centre) is not able to edit.
    Even I am not able to process payment entry without selection of Cost Centre on first dimension, the system is blocking and displaying the error message "DR Assignment is mandatory on Dimension 1 for specific account"
    Looks like bug, please clarify
    SBO version: 9.0 PL 11
    Regards,
    Kiran

  • Needed: WF for Down Payment Request (F-47)

    Hi,
       Is there any workflow for down payment request ?? What is the business object used for that ??
    Can anyone tell me ??

    hi MB
    try with the workflow no :ws00400012 , ws00400021
    regards
    surya

  • App for down payment request

    hi all,
    can any one give a configuration steps to run app for down payment request for vendors.
    this can be done through t code : F111
    i appreciated for ur affairs.
    regards,
    supriya thodimela.

    Hai,
    Y0u can use F110.
    Raghav

  • Which number range is used for down payment requests for vendors?

    Hi,
    Which number range is usually used for down payment requests for vendors?
    I would like to use it for:
    Y002 vendors (emplyees)
    Y004 vendors (1-time vendors)
    Y005 vendors (confidential vendors)
    The invoice will be posted via FI via Tcode FB60, FB65 & FB10 and F-02.
    Thank you for your feedback.
    Kind regards,
    Linda

    Hi
    For down payment request the Document type is KA hence the number range which is applicable to KA is applicable for vendor downpament also.
    In your case the number range is based on document types and not related to vendor types.
    Thanks
    Srinivas

  • Special gl config for down payment request

    while configuring down payment request I am getting the foll error
    "Special G/L indicator F is not defined for down payments
    Message no. F5053
    Diagnosis
    The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
    I have assigned my recon a/c for vendor with the altern recon a/c in the special g/l indicator "F"
    regards,
    smriti

    Hi
    I faced same issue and i solved that problem
    For that you have to go all special gl indicators  which are you selected.there double click the indicator and select  properties  there one option is available like  target special gl indicator  there you give F and save it
    After that come to Special gl indicator F double click and select properties and give target spl gl indicators like  A,V,I.....
    If you have any doubt feel free to ask
    May be this information is useful to you
    Regards
    Surya

  • Payment block set for Down payment requests processed via F110

    When I process a vendor down payment request from F-47, it gets paid during F110. However it gets posted to Vendor a/c with special GL indicator and with a "payment block". I am not sure why the payment block is put automatically. Can this be functionality be changed.

    Hello Krishna,
    Can u pls elaborate the question.
    Step1: Post down payment request F-47
    Step2: Post down payment against request F110
    When your getting this payment block.
    however pls go through this path
    IMG/FA/ARAP/Business transactions/Outgoing payments/Outgoing Payments Global Settings/Payment Block Reasons/Define Payment Block Reasons or Define Default Values for Payment Block
    Regards
    Murali

  • Bank Partner Type for Down Payment Request

    Dear Expert,
    Need help here.
    For example, we have 2 banks in a vendor master and each banks assigned with Bank partner type.
    When we post MIRO or FB60, system will pop out a screen for Bank Partner Type selection.
    But the bank partner type selection screen is not showing when I perform F-47 Down Payment Request.
    How can we have the Bank Partner Type screen pop up for selection during F-47?
    Any idea on this.
    Please help.
    Thank you.

    Hi,
    In T.code OBC4 take your filesd status varinet go to filed status group in that you find the 'payment reanscation' in that you will find the  'Bank Business Partners'  keep this files as required filed.to enter bank business partner.
    your query can be solved by this settings.
    cheers,
    Ravindranathareddy
    Edited by: Ravindranathareddy on Dec 21, 2011 8:33 AM

  • Partial payment for down payment request

    Dear All
    I have posted a 1000 INR down payment request by F-37. However, the customer only pays me for 700 INR.
    If i use F-29 to record the downpayment and try to link this 700 INR to the original down payment request then the system does not allow me to post and gives the message"Posting is only possible with a zero balance; correct document". Also if i click on additional line items the system does not let me create a new downpayment request (Spl GL F) with posting key 09.
    Request you to tell me if i can let 300 INR as down payment request and $700 as down payment received agsint the first downpayment request.
    Regards,
    Siddharth.

    Hi Shankar,
    I am working on EC 6.0 in case that is relevant.
    Agreed that a downpayment request is a noted item and wont affect balances. But when you recieve downpayment against that downpayment request, the system does not let you proceed if there is a difference between the downpayment request and the downpayment.
    my query is whether i can post that downpayment w.r.t to the downpayment request and create the residual amount as a new downpayment request.
    Thanks for your reply but the problem remains unresolved. Will award you points though

  • Park and Post for Down Payment Request (F-47)

    SAP Gurus,
    We are having requirement for park and post in Down Payment Request (F-47). So that it is approved by an authoriser.
    Hence, Is it possible to workflow a down payment request to an authoriser for approval
    Please share with me options available for this Down payment request
    Regards,
    Raj

    Hi Raj,
    Please check with your workflow consultant. Anyway, I'd like to share with you how to know whether there is a standard workflow for application component in question. T-Code SWDD -> Workflow -. Other Workflow/Version. Then drilldown on the task field. Then choose structure search. You will find the standard workflow for each of the component. Unfortunately, there is no standard workflow for downpayment but if you have workflow consultant, they may be able to help.
    Regards
    Fauzi

  • Workflow For Down-Payment Request

    Hi,
    Would like to know if there is a standard workflow associated with a down-payment request when a payment is posted on a customer account against this (down-payment request).
    I would also appreciate if a detailed procedure on how a workflow can be traced for such scenarios can be provided.
    Regards,
    Ravi

    I can't answer your question with certainty, but I can give you a tip about how to search for the answer in SAP.
    I am not quite sure which application component that would be in. I suppose it is somewhere in FI-AR, perhaps FI-AR-AR-MP-PA.
    You can use transaction SWDM to find all standard single and multistep tasks. On of the very useful search options is application component. Remember, sometimes a solution is used for several components in an area, so I recommend searching upwards in the hierarchy if you don't find it in the specific component.
    E.g. search in FI-AR-AR-MP-PA, then in FI-AR-AR-MP, then in FI-AR-AR and so on.
    You can also use SE81, where you can select entire areas or a combination of subareas and search in those. However, for workflow SWDM is probably just as easy.

  • Can not find business object for Down payment request

    Hi,
    I want to make one workflow regarding down payment . For that i need business object of down payment request . But i cannot able to find it . Any budy have idea about that please tell me .
    Regards,
    Gurprit Bhatia,.

    Hi
    you have to do all steps in LSMW
    1.Maintain Object Attributes
    2.Maintain Source Structures
    3 Maintain Source Fields
    4 Maintain Structure Relations
    5 Maintain Field Mapping and Conversion Rules
    7 Specify Files
    8 Assign Files
    9 Read Data
    10 Convert Data
    11 Create Batch Input Session
    Please maintain source fields required.thats important.(maintain 2 level-header and item,also provide common name of column to link to 2 files
    Header file:sample
    RECORDNAME     EQUNR     Plant
    10001031                        10001031      3000
    Item file:sample
    RECORDNAME     ITEM NO     MATNR     Item catg   QTY
    10001031                             10      P-1001          L               1
    Regards
    Seenu

  • Idoc for Down Payment Requests/Noted Items in FI

    Hi Experts,
    I have a sspecific requirement of creation of noted items/down payment requests in SAP FI.
    Could any one suggest the an IDOC and the values to e keyed in....
    Ramana

    hi,
    use this baisc idoc type.
    FIPARQ01.

Maybe you are looking for

  • Creating a Service Order automatically when saving a Sales Order

    Hello SDN, I'm trying to have SAP automatically create a Service Order when a Sales Order is created. To this end, I've tried implementing BADI workitem_template and have been using method before_update. I've been using BAPI BAPI_ALM_ORDER_MAINTAIN t

  • LMS 3.2 Solaris 10 install problem

    hi I have been trying for two days now to get LMS 3.2 properly installed on Solaris 10 10/08. Installed on ZFS filesystem with patch 127127-11 applied. The "symptoms" are as follow: When I point my browser to http://10.xxx.xxx.xxx:1741 I get redirect

  • Substituion Variables in Rules File as data source

    Hey all, This is a continuation of a previous post of mine. I have set some substitution variables to be all apps, all dbs, but when I got into the Rules File-File-Open SQL, it doesn't give me any substitution variables to select (greyed out), I have

  • My album didn't download and they charge my credit card

    I need to know how can download my album because it didn't download and appears as bought but i don't have it on my itunes help!!

  • Minimum previlege for user

    hi, i want to know minimum authorization to be given to user to execute BAPI i.e. BAPI_CHANGE_USER. and also let me know what are minimum role and profile to be given to access the R/3 system. thanks, John.