Special G/L indicator L is not defined for down payments

Hi,
While i am doing in the F-47 transaction i am trying to post down payment then i am getting the following error : --
Special G/L indicator L is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
Regards,
Rajesh

Hi
This error is due to non-assignment of G/L Accounts.
Go to OBYR or FBKP and double click sp. g/l. indicator F for Vendor type K and assign Reconciliation account and sp. g/l. account(advance to Vendors account) and save.
Also for sp. g/l. indicator L you might have done this as that Indicator you are using for Down Payments
and sp. g/l indicator F for Requests.
Regards
Venkat
Edited by: Venkat Dara on Jun 6, 2009 2:44 PM

Similar Messages

Special G/L Indicator F Is Not Defined for Down Payment

Dear All,
While creating down payment request (t.code f-47), I specified 'F' in Trg.sp.g/l ind check
box, the system thrown a message as, 'Special G/L indicator F is not defined for down payment' . And When I tried with "A" in stead of "F", I am able to create Down Payment Request.
My question is that when "F" is the indicator for Down Payment request, Why system is not accepting?
Thanks

Down Payment Request - Special G/L Indicator F
Refer this.
Even if you posted with A, the special GL indicator will be booked to F. Later see the document in FB03, you will come to know.

Special G/L indicator H is not defined for down payments

Can Any body help me please... I am giving the error details when i am posting Speical GL in F-37. Actually i want to post a Security Deposit made against Customer.
Special G/L indicator H is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
System Response
The entry is not accepted.
Procedure
Enter an allowed special G/L indicator or initiate a change of the default settings.
Thank you in advance

Hello,
In FS00 we will create the gl account for advance in control tab specifying vendor or customer.
next we will come to OBYR (vendor special transactions)
here first you have to define the special gl indicator SAP predefined some special gl indicators but if u want to create a new one first you have to create and in next tab you will attach vendor reconciliation and special gl account created in FS00 for advances.
in case if u want to create a special gl indicator for customer go to OBXR do the same as above.
specail gl indicators created in OBYR or OBXR are not work in FB60 or FB70 to book bills.
Hope this is clear, in case of query revert back.
Regards,
sankar

*Special G/L indicator R is not defined for down payments*

Hi Friends,
while posting down payment through F-47. I am getting following error
Special G/L indicator R is not defined for down payments
But when i checked in table T074U, i find SGL 'R' for 'K'
Kindly suggest me.........
Munender

Hi for vendor Down payments, we will use special GL indicator A, we dont use R or K. If you want to confirm that what Special GL Indicator you have defined for your client, You go to OBYR and Double click on Special GL Indicator A and next give your chart of accounts.Then it will take you to Special GL Account screen.
So for Down payment request you use Special GL indicator F & for Down payments use Special GL indicator A
Thanks
Fit 4 Nothing

Special G/L indicator X is not defined for down payments (Message no. F505)

{{{ Special G/L indicator X is not defined for down payments
Message no. F5053
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".}}}
*I have Created the Indicator X for Downpayment, and even assign both account to it but when i try to make my transaction using F-47 , it give me this error... kindly Give me Solution.can any one tell me how i can see the of the target special G/L indicators for indicator "F" *
Full Points would be awarded
Regards

Hello Maz,
Please can you tell me the solution. I have the same problem with the following
Message no. F5053
The specified special G/L indicator is not classified as "down payment"
or not listed in the list of the target special G/L indicators for
indicator "F".
I have done all the settings in OBYR for Vendors and even included the Target sp.G/L ind 'Z' in my case for down payment request F.
Your help will be highly appreciated
Regards
Satish
EFI

Special G/L indicator for down payment request F-47

Dear all,
I try to define a new Special G/L indicator for down payment request F-47, and I create it as Special Indicator for down payment/down payment request as Noted item, but the system gives me the error
Special G/L indicator F is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
System Response
The entry is not accepted.
Procedure
Enter an allowed special G/L indicator or initiate a change of the default settings.
PLease advice what to do

F-47 is for Vendor down payments.
Have you created your special GL Indicator for Vendors or Customers?
Please check the account type of the Special GL Indicator.
Rgds
Murali. N

Special gl config for down payment request

while configuring down payment request I am getting the foll error
"Special G/L indicator F is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
I have assigned my recon a/c for vendor with the altern recon a/c in the special g/l indicator "F"
regards,
smriti

Hi
I faced same issue and i solved that problem
For that you have to go all special gl indicators which are you selected.there double click the indicator and select properties there one option is available like target special gl indicator there you give F and save it
After that come to Special gl indicator F double click and select properties and give target spl gl indicators like A,V,I.....
If you have any doubt feel free to ask
May be this information is useful to you
Regards
Surya

Special G/L transactions not defined for bills/exch.and down pmnts ERROR

Dear Experts,
I am trying to park document via F-63 - Invoice Parking - General to park down payments made to vendor using following details in initial screen for F-63:
Posting Key_____29
Account number _1000
SGL Ind ________A
after pressing enter key the system prompt error message that is:
Special G/L transactions not defined for bills/exch.and down pmnts
Message no. FP030
Diagnosis
You have selected a posting key with a special G/L indicator of type 'Bill of exchange', or 'Down payment'. Document parking is not defined for special G/L transactions of the type 'Bill of exchange' or 'Down payment'.
System Response
Document parking cannot be carried out.
Procedure
Select a different posting key or special G/L indicator. If the posting is a 'One-time posting' to a rent contract, select a different transaction type or post the document directly.
HOW CAN I PARK DOWN PAYMENT DOCUMENT FOR VENDOR. KINDLY PROVIDE SUITABLE SOLUTION.
REGARDS

Dear,
Your special G/L "A" is set as Down Payment/Down Payment request, this is what cause the error.
To meet your requirement just go to FBKP select special G/L "A" enter your chart of accounts and go into properties, change
Special G/L transaction types to Others from Payment/Down payment request.
Advances can be created as Special G/L transaction types Others
If parking is utmost required by you then according to me you should create two special G/L for Down Payment. New created should be used for parking and default by SAP you can use with functionality like F-47, F-48, F-54.
System is stopping you because down payment functionality is provided exhaustively in SAP so you should follow that.
Please analyze the process exhaustively and implement to smoothen your process.
Regards,
Chintan Joshi.

Special G/L transactions not defined for bills/exch.and down pmnts

Dear Sapguru,
When i am down payment parking through F-65, and giving special gl indictor.
Error:---Special G/L transactions not defined for bills/exch.and down pmnts
Message no. FP030
Diagnosis
You have selected a posting key with a special G/L indicator of type 'Bill of exchange', or 'Down payment'. Document parking is not defined for special G/L transactions of the type 'Bill of exchange' or 'Down payment'.
System Response
Document parking cannot be carried out.
Procedure
Select a different posting key or special G/L indicator. If the posting is a 'One-time posting' to a rent contract, select a different transaction type or post the document directly.
Thanks.
Dharma.

Did you define spec. GL through OBXR (customers) or OBYR (vendors)?
regards

Document parking is not defined for special G/L transactions

Dear All,
I want to post a document with a special G/L indicator in F-65 . But I got an error message FP030 - Document parking can not be carried out .
Is anyone to got this message ?
Thanks
Dash

Dear Erdif,
this is right, you can not make document parking for down payments and bills of exchange.
But It is possible for Sp.GL indicators with Sp.GL transaction type "OTHERS" (look in FBKP select SPGL indicators and select button Proporties)
Best Regards
Your error message should be same like this below one:
Special G/L transactions not defined for bills/exch.and down pmnts
Message no. FP030
Diagnosis
You have selected a posting key with a special G/L indicator of type 'Bill of exchange', or 'Down payment'. Document parking is not defined for special G/L transactions of the type 'Bill of exchange' or 'Down payment'.
System response
Document parking cannot be carried out.
Procedure
Select a different posting key or special G/L indicator. If the posting is a 'One-time posting' to a rent contract, select a different transaction type or post the document directly.

Period Indicator C is not defined (ME55)

Hi,
I am getting this error "Period Indicator C is not defined" when try to perform ME55 - Collective Release of PRs.
Any idea what's the problem?
Thanks a lot.
Sue

Hi,
Please check the scope of list is F instead of C and also put date range
BR
Diwakar

Down Payments Error: Account type K is not defined for document type DZ T

I am getting the error message: Transaction code: F-29
Account type K is not defined for document type DZ
Message no. F5243
In this case i am trying to post a customer down payment in t.code: F-29.
In the document type DZ in OBA7 we tick only G.L and Customer tab as this is not a vendor document.
Also the settings in T. Code : OBXR where we maintain configuration for customers has been maintained with a special G/L reconciliation account.
any help will be really appreciated,
Regards
Satish

I have checked all the settings
OBXR for Customer Down Payments. It is with indicator A and a Special G/L Account has been configured.
The special G.L Account is of the Recon account type Customers with FSG as Recon accounts
The document type DZ in OBA7 is ticked for G.L and Customer and this is how i think it should be as i am not paying a vendor downpayment
but it still gives me the same error.
Regards
Satish

VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,

i am learning SAP PP and i hv ides 4.7,
now WHEN SAVING ORDER i.e DURING COST CALCULATION I GET A MESSAGE THAT VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,
ON ANALYSING IT LEADS TO T.CODE OKEV BUT HERE SYSTEM DOES NOT PERMIT TO CHANGE THE VERSION, BUT IN ECC 5.0 IT ALLOWS ,
WHAT IS THE PROBLEM, CAN ANY ONE PL. HELP ME,
analysis of error gives following message:
Activation of the indicator is not permitted
Message no. KT253
Diagnosis
You activated an indicator (Plan, Actual, WIP/results analysis or Variance calculation ) in the basic settings for version 1 in controlling area 1000. However, a higher order of settings (general version definition) prevents you from setting this indicator in version 1.
Note
The following should be taken into account when maintaining a version:
In general version definition you decide whether a version is allowed for
     Panning (with the Plan indicator)
     Actual data update (with the Actual indicator)
Note: In Overhead Cost Controlling, actual data is updated in operational version 0.
Actual versions different from 0 are found at present only for delta versions in Activity Based Costing (CO-ABC), and when you work with parallel assesment ( additional versions):
     A data version from results and WIP determination manages (indicator WIP)
     Another version from variance determination manages (indicator Variance)
     A version for exclusive use (field exclusive application)
You must maintain the version basic settings for each controlling area in which you want to update transaction data. General version definition restricts the settings possible for the controlling area:
     If general version definition does not allow plan and/or actual data update for version, this applies to the version in all controlling areas. If plan and/or actual data updating is allowed for a version in general definition, this can be reset for each controlling area separately (unmark the plan or actual indicator).
     Delta versions in ABC may not be used for parallel valuations in the actual; the same goes for versions with exclusive applications. In both cases, the valuation fields may not be maintained.
To set indicators WIP/Results- or Variance-determination the following conditions apply:
     Both indicators may be set only during setup for the controlling area, when they are already established in the higher level general version definition
     If either indicator is already active in the data bank, then the actual indicator may not be subsequently activated
     If the actual indicator is inactive and either of these indicators is active, then the valuations in the corresponding versions and in version "000" must agree
     If the actual indicator is active, then both indicators must be activated
Versions 0 and 1 are used regularly for various purposes by the system, which sets the following limitations/restrictions:
     Version 0 must always be available. It cannot be used exclusively. The plan and actual indicators must always be active.
     The actual indicator may not be activated in version 1.
If these conditions are violated during version maintenance, error messages are issued. There are three types of error message:
1. While maintaining the general version definition, you can only make changes if they do not violate the conditions outlined above.
2. While maintaining the basic settings in the controlling area, the entries must remain consistent with the higher level entries.
3. You want to maintain version 0 or 1. The restrictions outlined above apply.
Use the "Extras" menu option to display the structure of the entries in the complex data object version:
     Select a version and choose Extras -> Version use.
The SAP System shows which controlling areas use this version.
     Select Extras -> Versions in CO area
This displays all versions used in the current controlling area.
The subordinate entries in the hierarchy (settings for each fiscal year, strategic Activity-Based Costing: transactions for a delta versions) will also be shown for both cases.
Procedure
Do not activate the indicator, or change the higher order of settings in the general version definition.

Raj,
What are you trying to change?
To me you are not suppose to make any changes, you need to select the version "0" and then hit "Settings for each Fiscal year" subfolder.... here you copy the settings of 2006 and change the year to 2007. This should resolve the problem.
Regards,
Prasobh

Error:Account type D is not defined for document type RE

Hi! I encountered this error msg: "Account type D is not defined for document type RE" while posting IR in mir6. What does this error msg mean? Thanks!

hi,
RE stands for Gross postings...
When you block the document for payments...its never possible to the post the payments for such documents...
The invoice seems to get posted, but is internally blocked for payment and later you need to delete the payment block indicator and process the invoice further for payments...
check OMBA as well for the settings...
Regards
Priyanka.P

Series not defined for journal entry

Hello Sir
I have defined two series namely "SCPL" and "New1"
                Start No    Last No
SCPL        10001       3000
New1         3001        30000
Now i have made "SCPL" series as default for A/R Invoices and "New1" series as default for rest of the documents like A/R Credit memo,Journal Entry etc...
Now when I try to add an A/R Invoice , it gives me error message "Series not defined for journal entry"..??    But i have defined New1 series as default for Journal Entry

Hi,
In the series defined for journal entry,set document series as default for which default journal entries will be posted automatically.
Ex.For delivey,return,invoice journal entry will be generated automatically,so if you a series like JESYS08 indicating system automated journal entry.This series should be set as default.
If you have further issue let me know.

Special G/L indicator L is not defined for down payments

Similar Messages

Maybe you are looking for