Special stock inicator set automatically in production order

Hi there,
could anyone pls let me know, how to set the special stock indicator 2 to a component line, is the prod. order already assigned to project.
I have a material master for component: lot size: EX, Bom explosion: empty (indiv and coll), when I create a prod. order and assign it to WBS, always have to set manually the special stock indicatot component by component.
I d like this "2" automatically assign, if prod order is assigned to WBS.
How
ould it be done?
Br
Lovagszent
Edited by: Maria Györgyi Kovacs on Nov 23, 2010 12:24 PM

Dear
Just to make you understand , Lets take the following example
Assembly is X which is for any Project WBS.
X is assigned in the network and X is having ind/coll requirement as 1 in MRP4
the BOM of material X has X1/X2/X3 as child materials.
X1 is having blank in the ind/coll requirement in MRP4
X2 is having value 1 in the ind/coll requirement in MRP4
X3 is having value 2 in the ind/coll requirement in MRP4.
In this situation following is the result
X1 and X2 will get Special stock indicator as 2 where as X3 will have blank in Special stock indicator field.
Test with simple example and check in Production Order Compoenent Oveview also whether Special Stock Filed is getting updated with 2 or not .
Hope you understood the concept
Regards
JH
Edited by: Jiaul Haque on Nov 23, 2010 1:14 PM

Similar Messages

Special Stock indicator Setting in SD

Hi all,
I had created the normal delivery Sales Order. But when i'm trying to make delivery against the Sales Order. It gaves me error, Coz some how the Delivery item have Special Stock indicator set to 'E'.
from where i can remove this setting.
Pls note I had Checked the SO Item Category, Schedule line, Account assignment cateogry and the Delivery item Category, but couldnt trace out this Setting.
If any one knew about it, then let me know.
Regards,
S Anand.

Dear Sheo singh
Special stock indicator is set only in Item category with regard to SD that is in VOV7
You can also check in the requirement class details in OVZG
For this you need to find out what is requirement type maintained in your sales order in VA02 procuremet tab
In OVZH you need to see what is the requirement class assigned to your requirement type
In OVZG for your requirement class details you can see whether any special stock indicator is maintained
But here also the value flows from what is maintained in VOV7
Hope this information helps you
Regards
Raja

Is possible to create a TO automatically after production order confirmation?

Hi all
I have just a question in order to know if we can configurate a procedure to a Production Order, so my question
is possible to create a TO automatically after production order confirmation in a standard enviroment?
Thanks in advance for all your comments

Hi Gurus,
Thank you for your help in this case.
Process:
The customer create a production order in CO01 and then they confirm the order in CO15, after confirmation TR is created ( we can see this in LB10 ) and negative stock is created ( we can see this in LS24 ).
Requirement:
They are asking to create the TO automatically after the production order confirmation. Negative stock is afecting the process.
Workaround:
They are creating the TO in background in LB10. ( negative is fixed )
Question:
Can we create the TO automatically after confirmation in standard configuration?
if no , how can we confirm this TO .using a JOB option?
TR created after confirmation
TR header
LS24 negative units.
Regards!!
Ronald

Special stock indicator for component in process order

Hi,
There is a field in process order where we can maintain special stock indicator for component.
In this filed if we define consignment stock, then the vendor field becomes activated, where the vendor can be given.
Now we want to maintain the data as a master data so that whenever process order is created the sp stock indicator as well as vendor are populated for that particular component.
Q - where to define this master data. I could not see such fields in BOM?
regards,
Mohit

Hi Sunderesan,
Thaks for responding. Even by doing this system does not propose special stock indicator as '3' in process order & even vendor is not proposed.
My requirement is that system should propose '3' in special stock indicator in process order.
Request to look into this.
regards,
Mohit

Batch is not determined automatically in PRODUCTION order for components

Hi All,
Am working on the batch determination for the components by Goods receipt date(FIFO) during production order confirmation.
All the required settings are completed upto batch determination.But when click on the batch determination tab,batch is not picking in production order confirmation goods movement screen even though three batch stocks are available.
Kindly find the attachment for your reference.
Would grateful to your quick response.
Thanks!
Asirvad

Hi,
In general it should not be a problem. Request you to check below:
For the Batch Determination to work in production order for the components, you should have a value for the “batch entry” field. The values if set to “3” will carry out batch determination automatically and if set to “blank” will not carry out batch determination for the components in the production.
As well please refer the link for step by step checking.
SAP Batch Determination - SAPs'WORD - We SAP For Your Cause
Hope success :-)
Regards,
Krishnendu.

Budget error while issuing stock to the project based production order

Ours is project based Engineering company, we mfg euipments for the client which is part of the project.
We define separate WBS element for equipment to be manufacture & create reservation under this WBS element.
Secondly we follow production process through PP & define BOM for equipment which contains component rquired to mfg the equipment. To control cost(budget) component group wise we create separate sub WBS element for each component group(plates, motors etc) under above equipment WBS element
Kindly refer e.g.below
1. Equipment (Finished code) to be manufacture is attached on WBS MYC-210952-06-03
2. Production order(1003780) created with reference to above WBS element
3 Material procured under WBS MYC-210952-06-03-001
4. Stock available under WBS MYC-210952-06-03-001
We would like to issue material available under MYC-210952-06-03-001 to production order which is attached to WBS MYC-210952-06-03. (Tcode MB1A)
System allows to issue stock, but gives budget error.
Is it possible to transfer budget auto in the transaction MB1A itself from MYC-210952-06-03-001 to MYC-210952-06-03 or what is the best solution available for above situation.
Kindly confirm.
Thanks & regards
Sanjay Karnekar

Hi Sanjay,
You have consumed a budget at lower level WBS for material procurement. And at upper level you want to do stock transfer.
But while doing budget allocation you have distributed the budget from Upper level to lower level so there is no distributable value is avaialble at upper level for the amount of the materail stock you want to transfer.
In this either you have to keep your all budget values at upper level where your doing equipment aeembly and not distribute the budget further at lower level.
Now you alredy this so you cant do anything.
Now you have following option available with you. You have perform following activity by the given sequence.
Deactivate the Budget check by CJBW
Do your stock transfer
Do budget return by CJ38 from level WBS to upper level WBS
Now Activate the budget check by CJBV.
regards,
Pradeep

Special Stock E with a deleted Sales Order Position

Dear Experts,
Does anyone know how to unlink or move an special stock lot for a Sales Order Position that was deleted? I have a situation where a have some stock produced in a MTO scenario and the Sales Order position does not longer exist and the phisical stock can not be used.
Please advice...
Regards
Victor

how was it possible to delete a sales order that had sales order stock?
is it physically deleted or does it just have a deletion indicator?
What error message (number of error message please) do you get when you try the transfer posting?
Have you tried to count the special stock to zero and count the material as unrestricted stock with a physical inventory?

Wip is calculated when stock is del stage in production order

hi,
when i calculate wip, in production order in stage of full delivered. it is still showing some amount, actually it has to shown that amount as variance. but here variance is not calculating.
please suggest in this regard

Hi,
Normally, when the status of the Order is DLV, system should cancel the WIP and post variances.
For this we need to perform -Calculate WIP -Launch Variance calculation and-Execute Settlement.
We can also check while defining the valuation methods (RAKEY) in OKG3 the cancellation WIP is maintained.
Kind Regards
Umapathi G

Collective production order---GR/GI problem

Dear guru
My scenerio is collective production order. I have created PUMP header material and 2 component in that component i have maintained 52 special procurment key . and automatically 3 production order are created .
Now I want to create a stock of header material (PUMP) .
Actually I tried through MB31 and I do GR of header material and stock is also created to this material .
but my question is wht about chlid component ? that child component production order is still in MD04 .
so how it will consume . or have i made some mistake or tell me rt. scenerio.of (GR/GI)?

Dear,
GR is done for Main order only and document also post for main order. This is standard SAP funcitionality.
Confirmation is carried out same as normal Production order,
If u do the confirmation for suborder in the collective structure - the automatic goodsmovements taken place between the production orders in collective structure.
Since suborder materail is directly produced , when confirm the "suborder", the produced qty will issued automatically to "superior order".
There is no seperate goods issue is needed for superior order in collective order structure.
After confirming the suborder, u can confirm the superior order, and make GR for finished product.
For above process "Collective order with goods movements" check box should be activated for Order type at OPJH
Hope clear to you.
Regards,
R.Brahmankar

Special stock indicator in Production Order Component overview

Hi Team,
I have one finished product , for which i have created BOM . It has only one component in it .
Now i am creating a Sales order , based on the definition and requirement set , system is creating a production order in background.
When i go to production order and see components overview screen , there is one field special stock . This is getting filled with '1' - Individual customer stock always.
Even though we have stock in storage location , it is expecting components to be in Sales order stock .
If i create a stand alone production order for same materials , there is no special stock indicator set in components .
Can any body let me know how is this special stock field getting populated and what settings has to be reviewed in order to supress the same.
Thanks,
sudhakar

Sudhakar,
Check the MRP parameter 'Individual/Coll' in MRP4 view for the components. This should be set as 2 for collective planning. If this flag is left blank then planning will be based on the parent material (If the parent material is planned for special stock then the components will also be planned for special stock)
Let me know if this helps.
Thanks,
Jaison

Customer Subcontract Stock for Production Order

Dear All,
We have create a Subcontract Sales Order from VA01. Now after MRP run, we have a Planned Order which in turn will be converted into a Production Order.
The Finished Product contains a BOM, the Production Order in turn contains a list of the Raw Material Components. The scenario is as below.
Finished Product A
Raw Material Component B1
Raw Material Component B2 <- Material from Customer Subcontract (Booked into SAP system using Mvt 501 - E)
Raw Material Component B3
Raw Material Component B4
In case we want to issue material to this Production Order, system is requiring me to issue the Raw Material Components from Sales Order Stock (Special Stock E) for all components B1, B2, B3 and B4.
But for my case only B2 is the Material from Customer Subcontract and all other Raw Materials B1, B3 and B4 are from inhouse.
I would like to ask is there any method to modify the Production Order so that B2 is issue from Sales Order Stock where as for B1, B3 and B4 are from the normal unrestricted stock.
I have checked in the Plan Order but it only allows me to change the stock type for the whole Production Order. Does anyone knows how to set only particular components in the Production Order to be issued from Sales Order Stock?
Thanks.

"Dependent requirements ind. for individual and coll. reqmts" (MARC-SBDKZ) on MRP4 of material master is used to control whether the components are managed in the special stock segment or not in MTO environment.
(Discussed many times on the forum.)

Automatic production order creation and confirmation

Dear all,
I am in a situation where i have to configure the SAP system in the following ways:
1. From the planned orders automatically production order should be created today for the next day production and the end user will re-declare the quantity if there are any changes in the production order.
2. If there are no re declarations to be done SAP should automatically release production order and save it.
3. After the goods are produced the confirmation of the order should happen automatically from the measuring points.
4. In the order confirmation, the storage location for goods issue should be automatically captured from the goods issue slip.
5.After the confirmation of the order the goods receipt should happen automatically.
Please suggest me whether these are possible in SAP or not. If yes please tell me the procedure.

HI,
I hope this will give you the clear picture
actually my scenario is:
Finished good= x
work centers involved = WC1, WC2.
HERE BOTH THE WORK CENTERS ARE IDENTICAL, INPUTS ARE SAME AND OUTPUT IS THE FINISHED GOOD "X" FOR BOTH THE WORK CENTERS.
I HAVE A ROUTING FOR THE FINISHED GOOD "X" WITH TWO GROUP COUNTERS AS (1)WC1 AND (2) WC2
When i create plan in md61 for 1 month and when i do mrp run in md02 it will create the planned orders and we can see the stock requirements in md04 and when we double click on the planned order we can convert them into production orders.
But my users requirement is, he want to run the mrp in md01 and after that automatically each day the production order should be created.
example with the above work centers and materials:-
i have done the mrp run for "x" for November and December months
i want to produce "x" of 200 kg on 30.11.2011.
so SAP should generate production order for WC1 AS 100KG AND WC2 AS 100KG on 29.11.2011 at 5 pm automatically and the user will release the order.
similar example:-
i have done the mrp run for "x" for November and December months
i want to produce "x" of 400 kg on 03.12.2011.
so SAP should generate production order FOR WC1 AS 200KG AND WC2 AS 200KG on 02.12.2011 at 5 pm automatically and the user will release the order.
Please suggest me how to do the configure settings for my users requirement.
Thanks,
Aravind.C

Automatic creation of Production order when credit limit lock got released

It seems that production order will be created only when the sales order is created without credit lock error from the first.
Once credit lock happened, even if user release the lock, production order will not be created automatically anymore.
Is there a way to change the setting so that production order will be created automatically after credit unlock?
don't want to create production order manually every time when credit lock happens

Hello Manish
If you have used Standard Requirement 102 in Config T code OVB5 (Maintain Requirements For Transfer Of Requirements) , then it should behave as you wish, that is once you release the credit block, system should create Purchase Reqs/ Planned/production orders in the background. Check what you have there and/or choose appropriately here. While here, check out OVB8 (Maintain Requirements For Purchase And Assembly Orders) if anything needs to be done there.
Also ensure that there are no required fields ( for production order) missing, i.e., required entry fields that cannot be supplied automatically for this process.
For conceptual clarity, check out OSS note 396791 - Credit release of sales orders with third-party items which deals with 3rd party transactions but draws a parallel and mentions 'Production orders' also.

Automatic creation of Production order when PP/DS planned order is CIFed.

Hi PP Gurus,
The requirement is when PP/DS Planned order is created and CIFed to ECC R/3, Automatically system should create Production order for that planned order. In this case, is Trigger points will serve the purpose or need to adopt for some other way? I think since APO PP/DS is in sync with ECC R/3, something SAP might have given in this regard?
Thanks & Regards,
Abu Arbab

Dear Abu,
In SPRO PPDS global parameters and defaults, you can set "create transfer events from conversion indicator".
After this the planned order is transferred to R/3 only when a conversion indicator is set against planned order.The conversion indicator can be set through RRP3 or RRP4. You can put mass conversion indicator.
When such planned order is transferred, it will automatically create production order.
Regards,
Nitin Thatte
Edited by: Nitin Thatte on Apr 20, 2009 4:59 PM

Production order wise stock

Dear Experts ,
I have a requirement that i want to check production order wise stock in hand.its a bit urgent.
Can anybody just help me out by some Tcode or some tables by which i can get the required data.
Regards
Sarfraz

Hi,
If the Stock is not referring to any special stock (sales order, Project etc..), it is not possible to get the production Order stock.
This is with referenve to the FG.
If you want to have the Stock for Components of the production order, then with reference to the Reservation no. you can findout the components..
Regards,
siva

Special stock inicator set automatically in production order

Similar Messages

Maybe you are looking for