Speed dials on N96

Hi Speed dials not working on my n96, tried all usual things, anybody else got this problem or ideas how to fix?

What do you mean?
It works for me.
Speed Dial is located under Tools -> Utilities -> Speed Dial
Assign the speed dial numbers to the keymat
Then while in the Active Idle, press and hold the number key that you assigned to Speed Dial.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

Just got U-verse today, how do I set up speed dialing on my phone, I had it with the ATT service, but it does not work with the UVerse

OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
Looks like the simple part is using it - just press and hold the digit to dial the whole number.
So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)

Seemed like there should be a speed dial, so I did a search & found the cure is worse than the disease -
Dial from your phone
Make calls directly from your existing touch-tone home phone:
Local calls: Dial the 7- or 10-digit phone number.
Long distance calls: Dial 1 + area code + 7-digit phone number.
International calls: Dial 011 + country code + 7-digit phone number.
Dial online from your myAT&T account
Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
Log in to myAT&T. Don't have a myAT&T login? Register today!
From the I want to menu, select Manage my plans and services and then Manage my phone features.
Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
Enter a number to dial or select a number from your Call History or Address Book.
Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
Select Place Call.
When your home phone rings, pick it up to place your call.
Important Note
To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
Dial from your U-verse TV
With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
Tune to Channel 9900 using your U-verse TV remote.
Select a U-verse Voice phone number on screen.
Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
Scroll using the arrows.
Select a number and press OK to return a call.
Select Call and press OK.
When your home phone rings, pick it up to place your call.
You can have a call list accesed from a browser.
You can call back a historical call from the browser or TV.
https://www.att.com/esupport/article.jsp?sid=KB401002

How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
This is the page that loads:
http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
How did Yahoo embed this in the Tab settings?

Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

How do I add a speed dial to my iphone with a pause in it to dial an extension?

I can make an icon for a speed dial, but it will not allow me to use a comma as a pause to dial an extion to the phone number. Example: phone number being dialed is 507-555-555 (pause) extension: 55555 http://5075554444,12345.tel.qlnk.net is what I tried.

Page 215 might help: http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Speed Dial is replaced by another program instead of the program opening in a new tab. How to resolve?

I have been using Speed Dial for a long time and when I click on a button, usually a new page opens, leaving Speed Dial available. Recently, every time I click on a Speed Dial button, the new page opens in place of Speed Dial. If I want Speed Dial again, I have to back up page by page or restart Firefox. This has only happened recently and is very annoying. Any help will be appreciated. thanks.
Also finally remembered that instead of clicking on the speed dial icon, I can right click on it and click on "new tab". That way it will come up in a new window. This is not the way it always worked. Wonder why the change?

If you have a mouse with a scroll wheel then you can usually click that button to get a middle click.<br />
If you still have a mouse with only two buttons then you can consider to buy a new mouse with a scroll wheel as that makes scrolling a lot easier and also make use of Firefox features regarding a middle click.<br />
Most mouse drivers also allow to emulate such a middle click by pressing both mouse buttons at the same time.

Sir, i set the speed dial in home page,but when i open the new tab its show only the blank page,can you say the ways to show the speed dials whenever i open tab

plz say the way to set the speed dials which i set in home page whenever i open the new tab instead of blank page

Make sure the new tab feature is enabled:
* On the address bar, go to '''about:config''' (Just be careful)
* Set '''browser.newtabpage.enabled''' to '''true'''
To set the homepage to show the new tab page:
* Go to Firefox Menu > Preferences > General
* Set '''When Firefox starts''' to '''Show my Home page'''
* Set '''Home Page''' to '''about:newtab'''
So that a new tab opens the new tab page
* On the address bar, go to '''about:config''' (Just be careful)
* Set '''browser.newtab.url''' to '''about:newtab'''

Unable to Edit Number Locked In Speed Dial Position

All my Speed Dial listings were ported over to a new 8900 from an 8300. I also changed carriers. Coincidentally, I had my old carrier's voice mail access number programmed into the "W" position in the Speed Dial list on the 8300. That number is now in the "W" position on the 8900, which is the default position for the voice mail access number on the 8900. I am unable to delete the old number so I can enter my new carrier's voice mail access number. There is no EDIT option for that position, but the EDIT option is available for all other numbers in my Speed dial list EXCEPT the position Q, which has a default feature "Change Profile to Vibrate." It would be nice to know how to delete that feature, too. Can anyone help?

There are three keys preassigned
A Lock System
Q Change to vibrate
W Voicemail
You can change this ones, but if for any reason you reset the device, the preassigned keys come back
To change this go to phone, press menu, view speed dial list, go to the A (for ex), press enter, and choose the contact you want.
Remember to create a new contact called Voicemail or something like that to change the Voicemail Key.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

5800 - cannot speed dial and dial from handsfree c...

I verified the following behaviour of the new 5800 which seems to me to be a bug, because it works on other nokia series 60 phones:
Because I synchronize my phonebook with MS Outlook, phone numbers have the syntax "+43 (1) 9876543". These phonebook entries can be dialed without problems when I call using the phonebook.
But if I use the speed dialing feature (press and hold e.g. key "2" ), I get the message "Nicht gestattet" (German, means "not allowed" ), and the number is not dialed. If I delete the spaces and the brackets, dialing is possible without problems.
The same behaviour can be seen if I try to dial from my built in handsfree set in my car with numbers as described above.
Before the 5800 I used a E65 and a 6120c, there the syntax described above worked without problems.
Software: v11.0.008.red.01
Any clues?
Best regards,
Thomas
Message Edited by tez1 on 04-Feb-2009 11:52 AM

magpie68 wrote:
FIX...
I got this, I found out it happened when the number has spaces in it.
Try cleansing the number of all spaces and punctuation (and prefix with +country code)
This works for me.
Alan
Sorry, this is no fix, this is a workaround. It is clear, that this will avoid the problems. But PIMs like MS Outlook create phone numbers in this format; after synchronization with my phone, there are spaces in all of the phone numbers. Therefore I suggest, Nokia implements this like for all other S60v3 phones. This would be the only fix. Regards, Thomas.

I can no longer Dial my speed dial numbers by bluetooth after GB update....HELP

I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.
Motorola Droid X now with Gingerbread updated OTA
Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
Help

Adam819 wrote:
I can even deal with the fact that it erased my original speed dial settings. What I cannot deal with is the fact that BY LAW i must use a hands free device wihle driving but since the GB update I can no longer Dial my 9 speed dial numbers by Bluetooth. Trying to push the number and hold it for a few secs not only breaks the law and jepordizes my kids in the car . Here how it works ( or supposed to work. I push the button on my head set. It says " Say A Command ". I say Call speed dial 3. It repeats it back to me. I say Yes. It NOW dials the last number dialed. I never had this problem before the update.
Motorola Droid X now with Gingerbread updated OTA
Bluetooth is a Blueant Q1 with the App running on the Droid and updated to its latest firmware of 8.21
Help
Food for thought: There is actually information released by the NTSB that even using "hands free" devices while driving have been proven to distract drivers.
As for the Bluetooth commands: I've never used "speed dial" I usually say "Call Nicole Mobile" and it will connect still with no problems.
I just tried to use the voice command "call speed dial 1" and it did not recognize it. It appears you must use the name now.

How do I program pauses and/or waits in speed dials

I am using Cisco IP Communicator 8.6.1.0 softphone. I have entered speed dials and I am looking for how to enter a pause or wait so that it can dial the conference phone number and then enter the conference code. The popup says I can only enter numbers (0-9), plus ( + ), asterisk (*), or pound (#). If I enter a plus, the phone gives me a busy signal when dialing. I cannot enter a comma (,) which is common elsewhere.
I've asked my company's Help Desk and they don't know. Cisco Support says to talk to my company's Help Desk. I can't find mention of "pause" in the documentation I've been able to find.

Try writing a rule, Mail Preferences, Rules tab, click add rule.
If "any" of the following conditions are met:
Next drop down select "Message is Junk Mail"
Perform the following actions:
Next drop down select "Move Message" to mailbox "Trash" or "Delete Message"

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

HT1349 How do I set up a speed dial on my iPhone 4s? I am used to the bberry where I just keep my finger on a number in order to dial. This is very useful in the car. How do I get the same effect on iPhone?

How do I set up a speed dial on my iPhone 4s? I am used to the bberry where I just keep my finger on a number in order to dial. This is very useful in the car. How do I get the same effect on iPhone?

I found a post from Alope that told me exactly how to fix it.
Go to:
Settings - General - Restrictions - put your pass code in - Facetime - turn the switch to ON
Worked perfectly to stop the message that said, Not authorized to do that!

All the images in my Speed Dial thumbnails have disappeared and I can't get them back.

All the images in my Speed Dial thumbnails have disappeared and I can't get them back. When I check the settings all the thumbnails have the site shown in the details so should be showing the site in the thumbnail, but they're just blank. I uninstalled Speed Dial and installed it again, but to no avail. Something is stopping the image appearing but don't know what. I paused blocking on Ghostery, but that makes no difference. Any suggestions would be welcome!

See [[menu bar is missing]].

Speed dial only has one icon, to open up the windows. Another used to be on the other end of the tool bar for entering websites into the windows. Also do not know how to form another group.

I have just downloaded Firefox into a new computer. The firefox I had in my old computer had one (9 pt) icon at one end that brought up the speed 9 speed dial windows. It also had another similar icon at the other end of the tool bar that you could click on and place a website you were looking at into a particular window. This add on does not have that feature, which makes it very hard to make entries into the windows.
Also I have not found the way to add other groups of windows as I had before. I could even label them in categories. What to do?
My Computer is an HP p6653w and my default browser is Firefox 3.6
My operating system is windows 7.

Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I change the background pic thats behind my speed dial thumbnails

i put a pic in the browser window behind my speed dial thumbnails and i cannot remember how to change it.

Figured it out - When looking at your speed dial screen, do a right click, off to the side of a dialer, and choose '''''edit group''''', then select '''''additional style options''''', from there you can select an image background or colour.

Speed dials on N96

Similar Messages

Maybe you are looking for