Speedgrade Takes a Long Time to Open When Direct Linking From PP

Hello,
I was just trying out the new tutorial and footage for Speedgrade (the Pizza and Coffee stuff).
I notice that the very first time I do a direct link from the provided PP sequence, that there is a very long hang on the SG splash screen (with a series of progress bars animating over and over at the bottom). After a long time, SG finally opens.
After going through this process, I notice that future round trips between PP and SG in this same project no longer cause the long delay.
My question is, what is happening during that initial long delay? I know that there is not supposed to be any transcoding, etc. in the new workflow but if that is what is happening, where are the new files begin stored?
Thanks,
Lance
P.S. Bonus question, Are the Tabs like Timeline, Clip, Stereo 3D, Audio, etc supposed to be locked when working in a direct link project?

It could be a normal behavior to see a long loading process. The timing is related to a lot of different things, but there isn't any transcoding process. So no new files are created.
Yes, when using Direct Link, there are a few functionality greyed out.

Similar Messages

  • Downloaded 4.0 and having problems.webpages take a long time to open & when opened, I get a "firefox is not responding" message.yahoo email is not loading.Is there a problem with firefox 4? is the problem going to be fixed?

    firefox problems after installing version 4.0

    Hi Hussein,
    Thanks for your prompt reply and my apologies for the substantial delay in mine.
    We did some trouble shooting since then.
    We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
    But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
    My earlier questions here now boil down to the following questions.
    Q1. Is the huge XML Publisher's .out file expected in R12?  It really is massive!  The text file from 11i was just 19MB
    Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text.  I would expect plain text file to be much smaller.  How can we get the output in plain text?
    1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
    2. The authentication error is resolved. It was because of formatting the reports incorrectly.
    3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
    4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
    I will appreciate if others  can share any experiences if you have faced this situation and how you have handled it.
    Thanks in advance for your time!

  • Problem description: My  macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click-  EtreCheck

    My computer
    Problem description:
    My  macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
    EtreCheck version: 2.1.8 (121)
    Report generated 31 de março de 2015 18:29:15 BRT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 250
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320,07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.trusteer.rapport.rapportd.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Stickies    Application  (/Applications/Stickies.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        npsf_cef: Version: sf 3.3.1.1 [Click for support]
        Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
        DivX HiQ
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 999.86 GB
            Total number of backups: 60
            Oldest backup: 2012-07-15 01:16:54 +0000
            Last backup: 2015-03-29 19:28:06 +0000
            Size of backup disk: Excellent
                Backup size 999.86 GB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
            97%    rapportd
             3%    WindowServer
             1%    mds
             0%    fseventsd
             0%    distnoted
    Top Processes by Memory: ℹ️
        155 MB    Safari
        120 MB    Finder
        86 MB    rapportd
        86 MB    WindowServer
        69 MB    mds_stores
    Virtual Memory Information: ℹ️
        12.56 GB    Free RAM
        2.53 GB    Active RAM
        428 MB    Inactive RAM
        1.66 GB    Wired RAM
        1.04 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 31, 2015, 06:00:15 PM    Self test - passed
        Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
        Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
        Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
        Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
        Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
        Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
        Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
        Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

    Open Activity Monitor and kill this process - rapportd.
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Firefox takes very long time to open and often crashes for some websites

    i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
    == Troubleshooting information ==
    how can firefox be ready for use at first click?

    Open Activity Monitor and kill this process - rapportd.
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • ITunes takes a long time to open, or doesn't open at all.

    I recently had problems with iTunes where it just wouldn't open. I did a factory reset on my computer, however it takes a long time to open and works really slow. When I try to sync, it takes around in hour.

    .

  • AP Trial Balance - File is massive and takes a long time to open up

    Hello,
    We are upgrading from 11.5.10 to 12.1.3 and are running into some serioud problems with the Accounts Payables Trial Balance report in Detail Mode.
    1. The Report takes upwards of 10 minutes to open up - and in many cases does not.
    2. On further research we see that the report output file is > 500MB whereas comparable 11i Trial Balance files are only 19MB.
    3. We tried running in various formats Text, PDF, HTML with no luck.
    4. In fact HTML and Text formats gave “Authentication failed” errors when we tried to open the report.
    My questions are:
    1. Why is there a such a large increase in file size? Is this expected going to R12?
    2. Is there a way to speed up the opening of the large files or create smaller files? - (summary mode, and smaller date ranges are not options as per business needs). Even a 2 month date range give the same problems.
    3. We noticed that the XLA_TRIAL_BALANCES table has 36,521,125 records...LARGE.
    4. We compared the ap_liability_balance records between 11i and R12. We have 29,171,382 in 11i and 37,769,034 in R12. But this is expected as we purge regularly in 11i production and I don't think this difference (about 30%) in the size of the tables should cause such a large difference in the size of the report files (nearly 2000%!!!).
    5. Why are we getting Authentication failed errors? Just for these reports?
    Of course we opened an SR, but you know how SRs go :-) and this is a time critical project with our deadlines nearing.
    Any help or pointers from the experts here is greatly appreciated.
    Thanks
    Edited by: user11992646 on Jan 27, 2012 2:12 AM

    Hi Hussein,
    Thanks for your prompt reply and my apologies for the substantial delay in mine.
    We did some trouble shooting since then.
    We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
    But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
    My earlier questions here now boil down to the following questions.
    Q1. Is the huge XML Publisher's .out file expected in R12?  It really is massive!  The text file from 11i was just 19MB
    Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text.  I would expect plain text file to be much smaller.  How can we get the output in plain text?
    1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
    2. The authentication error is resolved. It was because of formatting the reports incorrectly.
    3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
    4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
    I will appreciate if others  can share any experiences if you have faced this situation and how you have handled it.
    Thanks in advance for your time!

  • Outlook 2010 takes a long time to open emails with embedded images

    Hello,
    outlook 2010 on windows 7 both with latest updates applied. outlook is in online mode and the option "Don't download automatically in HTML  email messages or RSS tiems" is not selected.
    it takes a long time to open the message with an embedded picture: at 6 sec to open an image size of 75kb
    When I open the same message in OWA no delays at all.
    I am using Exchange server 2010 Sp2 and I already created new outlook profiles for the users affected. no changes.
    Any ideas?

    Hi Aprylmsx,
    According to your description, I recommend you refer to the following methods to troubleshoot the issue:
    1. Please check if there is any anti-virus software on your client PC, if yes , please disable it and check the result.
    2. Please check if there are any 3rd party add-ins in your outlook, if yes, please remove it and check the result.
    In addition, How many users encounter this issue? a lot or just only you?
    Best regards,
    Niko
    Niko Cheng
    TechNet Community Support

  • It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

    It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

    There are file hidden all around in your system.
    Go to Phil Stokes' info page, for a gerat uninstall primer.

  • Crystal report with prompts takes very long time to open in infoview BOXI3.

    Crystal report with prompts takes very long time to open in infoview BOXI3.1?
    Is there any way to increase the performance.

    Ramsudhakar,
    There are several items that could cause these slow down problems. Without knowing more about the way your environment is setup, I could cause more problems, by giving out performance tips. You would need to be more specific in your post.
    What we know. BOXI3.1
    What we don't know.
    O/S
    App. Server
    Hardware Spec's
    ETC.
    I see that this post has been out here for some time. So if this is still a problem for you I'll try and help, if you provide more information.
    Thanks
    Bill

  • My mac takes a long time to open an internet page

    My mac takes a long time to open on internet page and it's not the connection as all our other apple products in the house are working fine. Any suggestions?

    Here are some troubleshooting steps.
    Does this behavior persist if  you:  (1) Try it from a different user account, e.g., Guest?  (2) Try it after starting up in Safe Mode ? (3) Try it after turning off all Safari Extensions? (4) Turn off all virus scanners, system cleaners, and third party optimizers?  (5) Delete all malware, (6) Temporarily disable all internet plug-ins?  (7) Make a burnt offering to Zeus?

  • Iphone seems to take a long time to charge when plugged in to USB

    Hi MyIphone seems to take a long time to charge when plugged in to USB. Is this normal? Less power coming from the Laptop than wall plug?

    Wow.. this completely amazes me. USB is 5v. Some computers (especially laptops) will shut off power to USB devices when the computer enters power saving mode. Very few will lower the power (since this could actually damage a device). I have noticed no difference in charge time between USB and the wall plug (I use the wall plug mostly when I travel, and USB at home). The only difference I can see is the wall wart puts out slightly more amperage then a USB port.

  • Excel files with fields linked to other excel files take a long time to open from SharePoint library

    Trying to track a problem for a user.
    Most of the documents opened from our SharePoint libraries appear to open in a timely fashion.
    But...one user has noticed an issue, and I just noticed something with her files that are a little less common than other stuff we've seen.
    she has a lot of pricelist excel files.  there are some master price list files, and then other files that link to fields from within the master files.
    the files that contain links to other files appear to be the ones that open very slowly.
    the files are being opened via excel itself, not the owa viewer or editor.
    is there a trick to setting up either the library, the site, site collection or web app... or some client-side setting that affects how quickly/efficiently excel will open files that link to other excel files shared within sharepoint?

    Hi  carphuntin_god,
    According to your description, my understanding  is that when you click a hyperlink which redirect to other files , the file are opened very slowly via excel client.
    How about you download the same file and open it using excel client? If it is opened quite fast, the issue should be caused by some third-party add-ins in the office program or antivirus soft.
    Here is a similar thread you can have a look:
    http://social.technet.microsoft.com/Forums/en-US/ff0c5306-5300-4010-a760-c4cca320b6fc/excell-file-taking-long-time-to-open-and-edit?forum=officesetupdeploylegacy
    http://social.technet.microsoft.com/Forums/en-US/5c746958-418a-44f6-a777-9f8bddf6dbb6/sharepoint-file-open-takes-long-time?forum=sharepointdevelopmentlegacy
    If you want to open the files using excel service after click the link in the excel file, you can create the hyperlink in the following way:
    General Syntax:         
    http://<server_name>/<site_name>/_layouts/ xlviewer.aspx?id=<workbook path>&range=<location>
    For example:              
    http://CorpServer/DeptA89/_layouts/ xlviewer.aspx?id=http://Mfct/Stats/Shared%20Documents/Parts.xlsx&range=Widgets!A1:F25
    For more information: 
    http://office.microsoft.com/en-001/sharepoint-server-help/using-hyperlinks-in-excel-services-HA010173679.aspx
    If you want to open the files using Office Web Apps after click  the link in the excel file,  you can create the hyperlink in the following way:
    http://<server name> / <site name> / <library name>/<your file name> ?web=1
    For example:
    http://sp/Shared%20Documents/exceltest.xlsx?Web=1
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Takes a long time to open small MS Word Documents on SSL VPN

    I have an issue that when users connect to my ASA 5520 via SSL VPN it takes from fifteen seconds to three minutes to open up small Microsoft Word documents, it also takes a long time to save changes. Users also reporting Word crashes when on the VPN, but not when they are on the LAN. I have checked the endpoint speed of my cable modem and all is well there. The DNS and WINS settings are correct on the ASA. I have turned off compression and enabled DTLS. Any suggestions? Thanks

    Reduce the mss to 1300. If that doesn't fix it, keep lowering it by 100 each time. If you get down to 1000 and it still doesn't work, then we need to look at something else.
    sysopt connection tcpmss 1300

  • Messages take a long time to open after EHP1 upgrade

    hi,
    We have recently upgraded our PI 7.0 to EHP1 and we find that it takes unusually long time in sxmb_moni to open up(view) messages, has anyone seen this before .
    Thank you
    Jonu Joy

    I'd suggest tracing system activity when this long runtime issue occurs, so you could know where this time is spent (db access ? etc) ... a plain SM50 call in parallel could do the trick if runtime is long enough !
    Chris

  • Videos take a long time to open after the last quicktime update

    Hey guys
    Since I've downloaded the latest quicktime update videos are taking a very long time to open. They used to open instantly and now they take about 40 seconds (negligable difference if quicktime is already open or not).
    This is with a Powermac G4 1.25Ghz with 2GB RAM running 10.4.10 and all latest updates.
    Any suggestions on how to fix this?

    I'd suggest tracing system activity when this long runtime issue occurs, so you could know where this time is spent (db access ? etc) ... a plain SM50 call in parallel could do the trick if runtime is long enough !
    Chris

Maybe you are looking for