Spell Check in Solution Database - Webclient

Is there a spell check in SAP for the Solution Database? I have a request for spell check on the webclient and I don't see one. Something similar to the spell check that you see when creating a message here. Any information on this would be greatly appreciated.

Hi Amory,
Are you able to solve this?
Right now I am trying to implement Spell check in webclient, could you please let me know how did you achive this?
I will appreciate your quick response.
Thanks for cooperation
Regards
Sandeep

Similar Messages

Looking for spell check solution with IE8 and apex 4.1

Hello: The most recent solution I find to implement spell check in IE8 and APEX is 2 years old - here: http://mattball.wordpress.com/2010/06/07/apex-spell-checker/
It shows how to integrate Jspell with apex. I will likely try the JSpell Evolution since it gives the little squiggle. Does anyone have success with this or another solution? Does it work within tabular forms?
Thanks, Hawk

Were you able to get JSpell installed? I am stuck in the same boat - I need a spell checker. The documentation is 2+ years old and on an Oracle 10.1.x database.
I am running Oracle 11g on a Linux installation with APEX 4.1
And I had to reinstall the OS on my development machine because when I installed IE Spell as a test, it installed some MALWARE at the same time. So that isn't even an option.
Has anyone tried any other spell checkers now that Oracle has deprecated spell checking in the Rich Text Editor for 4.1? Even Google Toolbar's spell check doesn't work with CKEDitor 3 as it has been implemented with APEX. On a standard CKEditor (outside of APEX), it works great but not within APEX (thanks Oracle!!)
Please advise.

Check Index Existence - Trex SOLMAN Solution Database Issue

Hi Experts,
I have done all the configuration part for having solution database functionality in SAP SOLMAN system. Our basis team has also installed TREX successfully.
But while checking in transaction CRMC_SAF_TOOL, everything is green except Check ndex Existence.
We are getting the below error messages:
Failed [Check=Index Existence ,Knowledge Base=SDB ,Language=E]
Failed [0 ]
Failed [No. of Documents=1-]
On discussion with Basis Team, I came to know that Indexes are getting created at putty level and while going to the indexes (Menu - Goto- Indexex (F8) in CRMC_SAF_TOOL, everything is seems to be fine and successful. No error there.
Please suggest where I am going wrong as I am still not able to search in IS02.
Thanks & Regards,
Madhu

Hello,
Sometimes this error is seen when an older version of Trex being used.
Are you on a current version of Trex? If not you may want to consider upgrading to a current version?
Additionally, sometimes documents saved via content management cannot be indexed,
as no url can be determined for them.
4. knowledgebase SDB_ATTACHMENT:
   The URL's do not get determined and this is why nothing would be
   put to TREX.
   Herefore, please follow the following note:
   685521 Logon data for /sap/bc/contentserver service
This may explain the HTTP:/no. DOcuments =1- error ???
So please ensure you have set the URL for the content server as per Note 685521
Regards,
Paul

My apple email will not spell check. i are ignored. proper names ignored . is there a solution?

my mac email will not spell check." i " shuold be "I" is note corrected or flagged. proper names not corrected. see this example of how it doesn't work :
" john this is what happnens when i type and email to joe. "

Uncheck it, recheck it, leave that pref window open... does it spell check now?

CRM Solution database How to main the problems and solution types

Hi
Can anyone tell me how to maintain problems and solutions in the CRM solution database , after setting up the TREX and SAF for the IC webclient .
we are unable to maintain the problem types with 1200 words in the problem description in IS01 Transaction We are unable to assign the codes to the problem type at the time of maintaining the problems and solutions in the IS01 transaction for solution database . after maintaining the problems and solutions the SAF indexing with full compilation and cluster compilation . the list of documents were showing successful status but when we search by the attribute type in the knowledge search the message is showing no search refinement found .kindly expedite the solution for the the above description
The TREX connectivity has been established successfully and the SAF is configured successfully without any errors in it but but we are unable to search the text based and attribute based search in the IC webclient knowledge search .
Regards
Vikas dinaker

Dear Vikas,
Kindly check C13_BB_Config guide as service marketplace.
It says in section 3.1.5.2.3 on page 57, the below mentioned paragraph.
3. On screen Create Problem maintain the following data:
Be sure that the descriptions of the following problem(s) and solution(s) are defined in all languages that you want to use (e.g., in the E-Commerce Internet Customer Self-Service).
4.Choose Enter. The default parameters are filled; please also see the NOTE following this description.
5.Enter the problem description listed in the box below. The first line should not exceed 40 characters, for this is like a short description of the problem that will be displayed in the first line of the hitlist in the search.
hope this helps
Amit

How do you spell check a field?

How are people spell checking their fields?
In searching around, I have only found (a) suggestions to yank the text into MS Word, do a spell check, then yank the resulting text into the field; (b) software from DC AL CODA that we aren't clear how they actually work (http://www.dcalcoda.com).
Specifically, my manager wants a tool that'll interface with Oracle like this: give a table name and a field name and be asked about each spelling error, much like an email spell check. The tool would change things as you ask, directly in the database. You wouldn't have to cut and paste into it and back to the db fields.
We aren't using forms. We use SQL*Plus, Quest Software's TOAD, and our own Java servlets (using JDBC to enter SQL statements).
I would love to hear how people do their spell checking.
Hopefully this is an appropriate forum for this question. There doesn't seem to be a general or SQL forum. Our database tables include a fair amount of text that shows up on Web pages. These are the fields we want to spell check.

I thought I'd reply to my own question since I found a workable solution, at least for our office which has MS Windows.
MS Access can connect directly to an Oracle data source. Access has a spell checking feature where you can select a field and spell check it. Below are tips and instructions for doing this.
TIPS:
It's surely a good idea to back up tables and be the only person or process changing those tables during the spell check.
One thing to watch for is whether the entire table comes in. At the bottom of the screen is a >* button which seems to get all fields. For large tables, you have to hit this button before you get the entire table.
Another glitch is that all of the given database user's tables show up in one list box -- makes for some painful scrolling, but all of the tables are listed.
A much smaller glitch is that if you widened any of the fields in the view of the table, when you close the window, it asks if you want to save the formatting. It has nothing to do with saving the data (that is automatic). It's safe to say no.
The spell check doesn't recognize HTML tags (asks about "br"s from tags) but seems to know to ignore things like "
How to set up an ODBC Data Source in Windows:
1. MS Start -> Settings -> Control Panel -> ODBC Data Sources (32 bit)
2. Drivers tab, scroll down and select Oracle ODBC Driver
3. OK
4. User DSN tab, Add...
5. Select Oracle ODBC Driver and Finish
6. Make up a data source name (example: src)
7. Enter a description for it
8. For Service name, put what your service name is (for an SQL*Plus connection, 'usr/passwd@svc', this is 'svc')
9. For UserID, put your user id (for an SQL*Plus connection, 'usr/passwd@svc', this is 'usr')
10. Ignore the rest of the fields, click OK
11. Another OK.
How to use Access to Spell Check an ODBC Data Source Field:
0. Install Access from (MS Office 2000).
1. Start Access (by the way, you might find it way down the list in Start -> Programs).
2. Open file, in the file type box, scroll to the end: ODBC Databases. You'll get a dialog.
3. Machine Data Source tab, select the name you gave it (src in step 6 above)
4. You'll be prompted for the password (for an SQL*Plus connection, 'usr/passwd@svc', this is 'passwd')
5. Select from the huge list of every table the table you want. Ok.
5.a. If the table has no key, you'll be prompted for the unique key from a list of all fields.
6. Double click the item that has just been added to the dialog that remains on the screen. It'll have a globe next to text like USR_TABLENAME. This brings up a randomly sized first chunk of the table.
7. To make sure you get the entire table, on the paging buttons on the bottom (|< < > >| >*), click >*. It may take a few moments to get a huge table.
8. Click the heading of the field (column) you want to spell check). This selects the entire column.
9. Hit spell check (ABC checkmark tool or Tools -> Spelling)
10. Check away. The changes are made immediately to the database.
11. Close the table display window.
null

CRM 7.0 Email Spell Check

Hello all,
Iu2019m currently working on an upgrade project. My client is upgrading from CRM 4.0 to CRM 7.0. During the upgrade we are implementing Email for CRM and my client is looking for auto spell checker to scan the body of the email. My client does not want their agent to have to push a button to activate the spell check but just auto underline the incorrect works, like in Microsoft products. My client is using the Web IC functionality of CRM 7.0. I was hoping someone could recommend a third party vendor since SAP CRM does not do it.

Hi Eric,
Check if John Burton's weblog solutions for spell checking may help you. It's located here:
/people/john.burton/blog/2008/04/14/spell-check-integration-with-crm-and-ic-webclient
Kind regards,
Garcia

Pages 08 Spell Checker Not Working

When I started using Pages 08, I turned on the Spelling --> Check Spelling As You Type. One day it stopped to work, in fact I do not know whether it is working or not since the red lines that highlighted incorrectly-spelled text no longer appeared. I tried turning the feature on and off several times, and fiddled with Text Inspector, but have foind no solution to this. Please advise, anyone. Thanks.

Repairing Permissions did not do anything for me. I have tried various and other sundry things as found in other messages about this major issue w/ Pages, but to no avail. Spell check works fine in other apps, TextEdit for example.

Service Desk - Solution Database - Solution retreival

I am trying to setup solution database for service desk.
1. I have set up TREX on the same host
2. Connected ABAP and TREX through a TCP/IP RFC
3. Completed configuration for the solution database using the available wizards
4. CRM_SAF_TOOL- all checks show greens
I am able to create a solution in a transaction using the "create solution in solution database" link.
My issue is:
When I go to another transaction and try to search for a available solution I do get get any results of the search. The short text used of both the transaction for which the solution was created and the transaction from which I am searching the SDB are the same.
What am I missing?
Thanks
Shabna

Had to generate the index.

System-wide spell check will not work

Hi,
I can't get the system-wide spell check to work on my MacBook Pro with the Command + Shift + ; (semicolon) keys. Does anyone know of a solution to this problem? The Spell-Check on the Fly will work.
Thank You,
Guy

I was able to zap the pram and that solved the problem.
Guy

We get paid with cheques and organise specialised coloured aluminium. I can not rid my mac book pro or my IMac of the american spell checker.

We get paid with cheques and organise, specialised coloured aluminium. I can not rid my apple devices, mac book pro, desktop IMac or IPhone of the american spell checker.
Everything, Numbers and Pages et al, always default back to US English. To cap it all we sell luminaires (yes this is a word used in our world of lighting design everyday) Mac and Microsoft always default - my docs have more words underlined in red that not. I once found a permanent solution for Microsoft that removed US english - and then the laptop died. Can anyone rid me of this irritation.

GOT IT FIXED! WOW!
I did better than filing a bug report. I went to Apple support, chose chat support. When it wanted $15 or was it $19 I filed an exemption which was a choice on the page, based on the fact that I recently upgraded to Yosemite.
Got the chat fellow and here we go!!!! ;-) First off he sent me this app so he could see my screen. Then he had me do a few things like move the system configuration folder to the desktop and repair permissions. Then he had me reset the SMC and Pram. Nothing helped, all the ghost computers still showed in the finder.
As a last resort he had me reset my Apple Airport Extreme. Wala! Ghost Computers GONE! He said it was a combination of stuff but mainly it was the airport extreme when I installed Yosemite. Something to do with my network. We'll see if it holds or if the problem comes back but as of now there's no more ghost computers in the sharing part of the finder.
Thanks to all who offered suggestions. I hope maybe this helps someone else.
Allen

Solution Database search option doesn't work

Hi,
Iu2019m working withSAP Solution Manager 7.0 (SID=SMG) is at SP 17.
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution Tools Plug-
In
PI_BASIS 2006_1_700 0006 SAPKIPYM06 Basis Plug-In
(PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
SAP_AP 700 0013 SAPKNA7013 SAP Application Platform
BBPCRM 500 0012 SAPKU50012 BBPCRM
BI_CONT 703 0011 SAPKIBIIQ1 Business Intelligence Content
ST 400 0017 SAPKITL427 SAP Solution Manager Tool
CPRXRPM 400 0009 SAPK-40009INCPRXRPM SAP
xRPM/cProjects/cFolders 4.00 (ABAP)
ST-A/PI 01K_CRM560 0000 - Application Servicetools for
CRM 500 510
ST-ETP 100 0000 - Extended tracability package
ST-ICO 150_700 0015 SAPK-1507FINSTPL SAP Solution Manager
Implementation Cont
ST-SER 700_2008_1 0004 SAPKITLOO4 SAP Solution Manager
Service Tools
Service Desk is working, and I'd like use solution database option. So
I've done whole configurations and their work fine.
- I've created a support message logging at solman_workcenter
transaction.
- Using this support message and SAP Tutor delivered at
service.sap.com/rkt-solman I've created a solution database.
- I've logged at CRMC_SAF_TOOL TA->I've marked all checkbox->Check
button->goto->index
(http://solutionmanager.servicesap.grupotec.es:8002/sap
(bD1lcyZjPTAxMA==)/bc/bsp/sap/crm_ei_cmp_admn/default.htm) and I've
indexed the problem/solution just created following SAP Tutor.
- If I log on at is01 TA and I view the problem(24)/solution(500000000019)
just indexed
The problem is that when I'm at crm_dno_monitor TA->select a support
message(8000001233)->edit view->Transaction Data area->Solution
Database tab->
I press button "Search SDB"->so a popup opens "Problem Search Criteria"
titled->and I'm not able to find any results I type words(dump, mara,
table, reboot)
these words appear at problem/solution description, I type these word
at - with ANY of the words:, - with ALL of the words:, - WITHOUT the
words: but
I haven't hit at the search. At this same pop-up I fill Reference-
>Problem number field and I type: 24, a hilist appears with the
problem/solution just created but when I press button continue it
doesn't insert the hit at the support message solution database table.
I've followed SAP Note 331109 but transaction IS02 doesn't exists.
The service connection to Solution Manager is opened and access data
(user solmanadm) is maintained too.
Please, could you help me?
Thanks and Regards,
Raul.

Problem solved using TA crm_saf_tool->index->check

Dump during save the solution in Solution Database (Service Desk)

Hello!
I use the functionality of Service Desk within SAP Solution Manager 4.0 (SP13).
Currentyl I am facing with the error during operation "Create of solution in Solution Database", when I try to save solution in SDB.
The following error text was processed in the system SSM : The ABAP/4 Open SQL array insert results in duplicate database records. records in the data base.
The error occurred on the application server <> and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: ISMV_POST_SYMP of program SAPLISMV
Function: ISMV_GENERATE_SYMPTOM of program SAPLISMV
Form: GENERATE_SYMPTOM of program SAPLISMB
Form: POST_SYMPTOM of program SAPLISMB
Form: %_PROCESS_P_O_C of program SAPMSSY0
Form: %_COMMIT of program SAPMSSY0
Method: CREATE_SDB_SYM_SOL of program CL_SDK_SDB_NOTIFICATION=======CP
Method: SAVE_WORK of program /1BCWDY/247RJ8VA8ISK2P37WABF==CP
Method: IF_COMPONENTCONTROLLER~SAVE_WORK of program /1BCWDY/247RJ8VA8ISK2P37WABF==CP
Method: ONACTIONBTN_SAVE of program /1BCWDY/247RJ8VA8ISK2P37WABF==CP
My questions are:
- Should TREX also be installed with SAP Solution Manager or can one existing from other SAP system be used?
- Is there some SPRO steps to be executed in order to create and save solution in SDB?
Thank you very much!
regards
Thom

Hi
check the sap note 1124452 and implement the correction instruction or make a program with Zcode implementation.
Reagrs,
Vijay.

Spell Check is not working, still......

Another long time user that has been with you for years has had enough, over to Opera where I can write an email without looking like an unprofessional  dummy that can't even use spell checker.
Linux mint 14, fully updated, two different pc's both same problem with spellchecker, this problem has been going on for a long time now. Do you really expect people to use a browser without a spellcheck? This has been a 'bug' for how long now? People just go elsewhere, why wouldn't you, try running a business and sending people sketchy looking emails.
I fix PC's for a living, I used to put everybody onto Thunderbird and Firefox, do you think I still do that? Obviously like the people I know who do the same thing for a living, I put them onto Chrome so they don't ring me complaining that it doesn't work properly.
You guys are loosing market share for a reason, we need a functional non bloated browser that doesn't freeze and crash all the time,  forget the fancy add-ons and themes, make the  basics work because from the techiest person to the most useless pleb luddite, we all need the basics to work or the browser is a useless piece of  crap.
This site is proof of how you are alienating people too, I go to register and it tells me I don't need to register for a new question, I click on that and half way through it asks me to register, then when registering it took about 6 tries for your javascript to accept it: "username too short", "password is short", "username exists". Tell us before ffs! I nearly gave up and shut the window. Anybody unfamiliar with pc's would have given up after a try or two and gone back to IE.
Please, please, get your  stuff together, I love Mozilla and I love Firefox, it's named after my favourite baddies in the original Donkey Kong, ffs, I love you guys, get back to basics and make a functional browser that people prefer to IE, you are killing it, get back to basics and make it FUNCTIONAL

I had this problem too, spell check stopped working, I presume after an update. The solution is to add a dictionary, which you can by going to
[https://addons.mozilla.org/en-US/firefox/language-tools/ Firefox language Tools]
Though why this link is not on the same option tab as the spell check checkbox is beyond me. It appears that if your locale is US, Firefox is supposed to load the US dictionary, otherwise none. Pretty dumb, eh?

CRM Solution Database Attachments

We are creating problems and solution in the CRM (5.0) solution database. I can attach documents to the different solutions, but if I want to attach the same document to 10 solutions I need to do it 10 times. When the document changes I will then need to update all 10 solutions.
Is there a way in CRM to create one document and link it to multiple solutions so that I will need to update the document one time when it changes?
Thanks
Tom
Message was edited by:
Tom Samata

Dear Vikas,
Kindly check C13_BB_Config guide as service marketplace.
It says in section 3.1.5.2.3 on page 57, the below mentioned paragraph.
3. On screen Create Problem maintain the following data:
Be sure that the descriptions of the following problem(s) and solution(s) are defined in all languages that you want to use (e.g., in the E-Commerce Internet Customer Self-Service).
4.Choose Enter. The default parameters are filled; please also see the NOTE following this description.
5.Enter the problem description listed in the box below. The first line should not exceed 40 characters, for this is like a short description of the problem that will be displayed in the first line of the hitlist in the search.
hope this helps
Amit

Spell Check in Solution Database - Webclient

Similar Messages

Maybe you are looking for