SPL screening of HCM Empoyees with new legal regulation

Hello GTS Experts,
I have SPL Screening in place for Logistics Business partners.
Our affiliate wants to do HR Data screening with different SPL list. I have configured new Legal Regulation.
We are screening employees successfully.
However, when a logistics BP(Vendors/Customers) address change is done on Feeder system, the BP gets screened against Both Legal Regulations.
I don't want any Logistics BPs screened against the New Legal Regulation for SPL Screening of employees.In the new legal regulation, we have the following setting for Check logic for Docs.
1. Status Check of Unchanged Addresses(Partner Address)
Is there a way to prevent logistics BPs screening against the New Legal Regulation which is only for HCM Employees screening ?
Thank you,
Ram

Hi Dhilipan,
The new legal regulation was for European countries data security requirement and providing advance authorization.
What you suggest is to check the BAdIs and make enhancement. I will check it out and work with our technical team. I was hoping to avoid the custom development.
Thanks.
Ram.

Similar Messages

Screen Sharing not working with "New" MacBooks

I have a problem. My friends just got the "New" MacBooks, and I have a white MacBook. I tried Screen Sharing with them, but it just does not work. We get audio for the first few seconds, but we never see the other persons screen. Anyone else have this issue, and if you have a "New" macbook, I would like to see if it would work with yours. My AIM Name for iChat is ckeboss

Hi,
This Motorola is a branded Netopia device (Motorola Own them now)
Default access info is near the top of this page
Turn the Firewall Off or to Low as Medium an High have things that interfere with iChat. (Make sure the Stateful Packet Inspection is OFF)
Check all the tabs across the top and the menus down the side of each page to see if it has UPnP (most likely in Local Network but could be anywhere)
The pics will show you if it is doing DHCP
The Airport settings are in Airport Utility and on the Internet iCon screen where it says "Share a Public IP" in the bottom drop down.
7:29 PM Tuesday; July 14, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Video and Screen Sharing not working with new modem

I give up. Just replaced my old dead Motorola DSL modem with a new Motorola 2210-02 DSL Modem and now iChat video and screen sharing aren't working. I am running 10.5.7, have an Airport Extreme, and 2 computers with cameras (a G5 with an iSight, a Macbook Pro with built in camera) and both worked fine before the modem switch. iChat works, just not video or screen sharing. I have 3 or so friends that I used to be able to video chat with regularly before the modem swap. Spent 3 hours and $50.00 on Apple support with no results. Also talked with my provider (AT&T/Yahoo) and they were no help. Anyone?

Hi,
This Motorola is a branded Netopia device (Motorola Own them now)
Default access info is near the top of this page
Turn the Firewall Off or to Low as Medium an High have things that interfere with iChat. (Make sure the Stateful Packet Inspection is OFF)
Check all the tabs across the top and the menus down the side of each page to see if it has UPnP (most likely in Local Network but could be anywhere)
The pics will show you if it is doing DHCP
The Airport settings are in Airport Utility and on the Internet iCon screen where it says "Share a Public IP" in the bottom drop down.
7:29 PM Tuesday; July 14, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Screen sharing performance hit with new remote desktop client?

Having not used my headless Mini for a few days I started it up and was controlling for software updates etc from the Mac Pro.
Both the Mac Pro and Mini softwae updates had a new version of Remote Desktop Client - after installing on both the secreen sharing and control seems very laggy with poorer updating.
Anyone else?
Can I get the previous client version?
AC
Both Macs on 10.6.8

OK, earlier client here:
http://support.apple.com/kb/DL1491
Can someone kindly instruct me how to uninstall the latest version so that I can revert.
AC

Second screen for MacBook Pro with new IOS update?

I have a second screen for my MacBook Pro and after doing the IOS update it does not work. I went to preferences and it does not appear as an available display.

No can't be done.
I would like to see the links to anyone that says it can. So please post one or 2 of them. Thanks.

Screen Lock not working with new OS

After loading the 4.2 OS on the iPad now the Screen Lock button became the mute button!
Useless to me and lost useful functionality.
Please advise - is there any chance to get back to the Screen Lock function without re-installing the previous OS?
Urgent please!

Rotation lock is now a software function on the taskbar in 4.2 and the button now mutes notifications e.g. so that you can watch videos or listen to music without hearing email notifications etc.
Rotation lock : double-click the home button, slide from the left, and it's the button far right; press home again to exit the taskbar; repeat to switch off rotation lock.

Just got new iphone 4s. trying to edit photo but screen is black and with a "constrain" bar at the bottom of my screen, can't clear it or get back to photos

Just got new iphone 4s. Trying to edit photo but screen is black and with "constraint" bar at the bottom. I am unable to clear the black screen or get back to photo gallery. Help!

- Exactly what are you doing? You saying you are trying to syn it to new comnputer. When yuo sync it to a new computer iTunes will erase the iPod and replace its contents with what is i the iTunes library of the new computer.

HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup.

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to start???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

HT1937 how can i replace my iPhone 4G -broken screen with new IPHONE 4G?

hi Guys, I have iPHONE 4G 15 G, yesterday i broke the screen, however it still works super fine, and the touch works normal too. Only the screen is 50% damaged. I have been informed that I can change it with new 4G 16G by paying like 120 GBP, how can I do that ?

Take your iPhone to an Apple Store or call Apple Support. They'll exchange your iPhone for £126,44 if you ship it in or £119 if you can get to an Apple Store. The unit you get in replacement will be refurbished and an idential model to the one you have now.
Regards.

My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?

My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?

Reset the device by pressing and holding the home and power buttons for about 15-20 seconds.

I renamed my Apple ID with new name but the old password is no more working. What should I do ? After renaming I am getting pop up message regarding icloud on my screen but I am unable to set off the message box now

I renamed my Apple ID with new name but the old password is no more working. What should I do ? After renaming I am getting pop up message regarding icloud on my screen but I am unable to set off the message box now

What to do after you change your Apple ID email address or password - Apple Support
ÇÇÇ

Screen resolution with new graphics card

Mac G4 400 AGP (Sawtooth) OS9.2.2 + Tiger
Hi, I have just updated my old G4 with new HD and new Nvidia GeForce 2MX graphics card. Under OSX everything seems fine but under OS9 the screen (22 Lacie Electron) will only display at 640 x 480 with no other choice of resolutions. I cannot find any drivers other than the Driver Update 3.0v1.1 which gives a message that it 'cannot be run on this computer'.
The original ATI Rage had extensions but I cannot find anything for the Nvidea card - do I nee to reinstall the OS to have them load?
Is this lack of resolution normal or can I change it? I only boot onto OS9 to access some older SCSI devices but the screen re is horrible and makes it hard to use.
Any help or advice welcome. Thanks.
Message was edited by: AntF

Hi, AntF -
The OS 9.2.2 download updater includes NVIDIA drivers (v. 2.4), but they probably would not have been installed if the NVIDIA card was not in the machine at the time the updater was run.
You can probably get them installed them by re-running the OS 9.2.2 updater, now that the card is present.
Or, you can extract them manually from the Installation Tome contained in that download update. You can use the utility TomeViewer to extract (expand) any files you want from an Installation Tome on an OS Install CD or download disk image, without running the installer. There are several NVIDIA extensions; since the default view in TomeViewer is alphabetical, you should be able to grab all of them as a group. Extract (expand) them to the desktop, then (while booted to OS 9) drop them into the closed System Folder - Finder will place them for you.
How to use TomeViewer
I would do the second, since it is safer (there's no risk of the installer accidentally replacing something which should not be replaced).
In case you do not have the OS 9.2.2 updater handy -
Article #75186 - Mac OS 9.2.2 - Download and Info
After getting the NVIDIA extensions installed, restart. Then use Extensions Manager to turn off (uncheck) the ATI extensions. Restart again.

Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??

Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??

I also tried the Hard Restart and still has the problem?

I have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. show i buy a new snow leopard disc fromapple

i have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. should i buy a new snow leopard disc from apple and install that as my new operating system. please help as had the computer a month now and still cant use it yet.

You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

SPL screening of HCM Empoyees with new legal regulation

Similar Messages

Maybe you are looking for