Splash Screen Security?

With 1200 series IOS APs, is it possible / will it someday be possible to enable security that involves a splash screen presented to the user when they open an IE browser, where they enter a password to get authenticated and on the WLAN? I know it's possible when creating a WLAN on the Controllers...

Currently it is not possible, and it probably won't be possible since they still have BBSM lite available. This was already an option on the Airespace product before Cisco was involved, thus it was carried over to the 4400 series controllers.

Similar Messages

  • Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

    I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses).  I did a completely fresh install of Windows 7 Ultimate 64-bit.  I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
    Google searches aren't turning up anything.  When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears.  However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar.  I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there.  I tried uninstalling and reinstalling.  I tried upgrading to CS3 10.0.1.  Nothing works.  The application simply freezes before it gets anywhere.
    I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today.  Go figure.
    Edit:  I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects().  The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function).  There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

    Log Name:      Application
    Source:        Application Hang
    Date:          7/17/2010 6:16:25 PM
    Event ID:      1002
    Task Category: (101)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: d0c
    Start Time: 01cb2616be79e36f
    Termination Time: 2
    Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
    Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Hang" />
        <EventID Qualifiers="0">1002</EventID>
        <Level>2</Level>
        <Task>101</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
        <EventRecordID>1615</EventRecordID>
        <Channel>Application</Channel>
        <Security />
      </System>
      <EventData>
        <Data>Photoshop.exe</Data>
        <Data>10.0.1.0</Data>
        <Data>d0c</Data>
        <Data>01cb2616be79e36f</Data>
        <Data>2</Data>
        <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
        <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
        <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
      </EventData>
    </Event>
    And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
    My Visual Studio analysis was far more informative.  All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related.  I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start.  That also did not work.
    (And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
    Edit:  The timestamp above might be a little odd-looking.  I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report.  Mostly I just skipped that part of killing a process.

  • Stuck at BIOS splash screen

    I own a lenovo b570e model 20713.
    I was trying to install Ubuntu 14.04 on it, and after installation I rebooted.
    Now the computer is stuck at boot splash screen, will not let me press f2 or f12. Just hangs there at the splash screen.
    Any suggestions?

    Did you perform a clean install of Ubuntu following the instructions on the Ubuntu forums? There are specific steps required to install Ubuntu on a system that uses UEFI instead of legacy BIOS.
    You can try removing battery and AC power, then hold down power button for more than 30 seconds to reset the UEFI settings.  Once completed, reattach battery and AC power, then enter UEFI and disable Secure Boot.
    Good luck.

  • Splash Screen and not beyond... Closes abruptly? PE8 WinXP SP2

    Splash Screen and not beyond... Closes abruptly? PE8 WinXP Professional SP2:
    I got a lot of good info from the forum today, I do not have the internet at my house, which has added to this $100+ headache so I'm gonna try some stuff tonight and check back here tommorrow.
    1. I would have tried uninstalling and re-installing but it came up with some serial number message, because I can't register online from my home I don't want to get locked out of the program or something, hey, it could happen knowing all this security crap.
    2. I get the splash screen like others have, but I don't get the actual program: Premiere Elements 8, it runs through all the plugins on the application startup screen and then closes w/o any explanation.
    3. After trying to get things working, "ElementsAutoAnalyzer.exe" is taking up 100+ mb ram in the background. What is this thing?
    so far annoyed, but hopeful, still love my other Adobe Apps.
    Feel free to address anything, I apreaciate it!! Even links to other articles, hopefully I'll figure it out tonight, I will post success / failure.
    Thanks,
    Robb

    I want to add as much info as I can:
    *Splash screen shows up, but only the video/image viewer/manager hub or whatever is able to open.
    *I can open up the Premiere Elements program to the intro loading screen, once it loads the plugins it closes.
    *I've tried every possible combination within the video manager hub thing to access the Video editing (Elements) software, it may show the loading screen then it closes with nothing, (the video manager remains open still).
    Installed: Adobe Premiere Elements 8.0 from DVD 1, I did not install templates from Disc 2 or whatever.
    *"Single Processor Detected" (I think that's what it said)
    *I set up Service Pack 2, because it wouldn't let me install until I did this.
    *I have Windows XP Professional
    *I have plenty of HardDrive space. Don't think RAM is a problem.
    What I'm going to do tonight:
    *Install latest Quicktime 7.something, (downloaded on 11-01-09) from Quicktime.com
    *Uninstall the unnessesary driver file mentioned in another post. (or disable it by renaming it)
    *Hold shift key while opening program to clear cache, I read that somewhere.
    *Possibly re-install software, hopefully I could get back in with my Serial.
    -I printed out Trouble shooting section from Adobe.com.
    Please leave suggestions, I'm sure I'm not the only one who will benefit.
    Robb
    (I got my receipt, I really don't want to use it)

  • Satellite P300 PSPCCE: I want to remove or chang splash screen on startup

    I have Satellite P300 PSPCCE laptop and want to remove or change splash screen on begin of booting laptop.
    Is there a way to do it? My Bios version is v3,40

    this is how it looks my BIOS setup (no options like quite boot, fast boot, etc.)
    Main
    * System Time
    * System Date
    * CPU Type
    * CPU Speed
    * HDD1 model name
    * HDD2 model name
    * Optical Disc driver
    * Power on display
    * Total Memory
    * System Bios version
    * Language
    Advanced
    * Legacy USB Support
    * Core Multri-Processing
    * Execute-Disable bit Capability
    * Intel(R) Virtualization Technology
    * Built-in LAN
    * Wake-up on keybord
    * Wake-up on LAN/Wireless LAN
    * Critical Battery Wake up
    * Pointing devices
    * Illumination LED
    * USB Sleep and charge
    * HDMI-CEC
    * Remote power on/off
    * SATA controler Mode
    Security
    * User password Is
    * Supervisor password is
    * Set user password
    * Set supervisor password
    * HDD1 password
    * Set HDD1 User password
    * HDD2 password
    * Set HDD2 User password
    Boot
    * HDD1
    * HDD2
    * CD/DVD
    * FDD
    * LAN
    Exit
    * Exite saving changes
    * Exit discarding changes
    * Load setup defaults
    * Discard changes
    * Save changes
    Which version of bios, are you having?

  • Premiere CC - Crash on splash screen - Tried the usual solutions

    Premiere CC crashes immediately upon the splash screen appearing.
    I've tried everything I've read here that might work:
    Reinstalling
    Clearing the preferences in the AppData folder
    Signing out and logging back in to CC
    Restarting the computer
    Updating the video card
    Changing language preferences
    Still nothing.
    Here is the error log:
    System
    Provider
    [ Name]
    Application Error
    EventID
    1000
    [ Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2014-02-05T01:17:39.000000000Z
    EventRecordID
    63376
    Channel
    Application
    Computer
    Studio
    Security
    EventData
    Adobe Premiere Pro.exe
    7.2.1.4
    52aed7f3
    amdocl64.dll
    10.0.1084.4
    50d22720
    c0000005
    0000000000062e07
    1340
    01cf22100e91f7b0
    C:\Program Files\Adobe\Adobe Premiere Pro CC\Adobe Premiere Pro.exe
    C:\Windows\system32\amdocl64.dll
    4d77ae70-8e03-11e3-a368-00044b03b541

    Welcome to the forum, Duklyon,
    The "Faulting Module Path" (amdocl64.dll) led me to this thread: http://forums.adobe.com/thread/1343944?tstart=0. The solution recommended there is to delete that dll file from C:\Windows\system32\.

  • Custom splash screen for app under JWS 1.2 from 1.4.1 beta?

    Has anyone gotten a custom app's splash screen to come up instead of the damn Sun Java Web Start splash screen to come up when the app starts from a desktop icon or if you launch it from JWS?
    I added it to my jnlp file as specified in the docs, but it just doesn't come up :-(
    <description kind="tooltip">TransMedia 2</description>
    <icon kind="default" href="transmedia.gif" />
    <icon kind="selected" href="transmedia.gif" />
    <icon kind="disabled" href="transmedia.gif" />
    <icon kind="rollover" href="transmedia.gif" />
    <icon kind="splash" href="transmediasplash.gif" />
    </information>

    Hello,
    I read your postings here and I did what you proposed.
    Nevertheless the splash screen doesn't show up.
    I'm using Java 1.4.1, Web Start 1.2; the jnlp file
    looks like that:
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp codebase="http://venus/example-client/" href="example.jnlp">
    <information>
    <title>Example</title>
    <vendor>My Company/vendor>
    <description>JBoss Client</description>
    <icon href="splashscreen.jpg" kind="splash" />
    </information>
    <security>
    <all-permissions/>
    </security>
    <resources>
    <j2se version="1.4+"/>
    <jar href="example-client.jar" main="true"/>
    <jar href="jbosssx-client.jar"/>
    <jar href="concurrent.jar"/>
    <jar href="jboss-client.jar"/>
    <jar href="jboss-common-client.jar"/>
    <jar href="jboss-j2ee.jar"/>
    <jar href="jnp-client.jar"/>
    <jar href="log4j.jar"/>
    <jar href="datepicker.jar"/>
    <jar href="jcommon-0.7.1.jar"/>
    <jar href="jfreechart-0.9.4.jar"/>
    <jar href="xercesImpl.jar"/>
    <jar href="xml-apis.jar"/>
    <jar href="xalan.jar"/>
    <property name="java.security.auth.login.config" value="http://venus/example-client/auth.conf"/>
    </resources>
    <application-desc main-class="com.mycompany.ui.Example"/>
    </jnlp>
    any idea why webstart doesn't use the custom "splashscreen.jpg"?
    a properly splashXXXXX.jpg has been created in .javaws/cache/splashes, as well as an entry in splash.xml.
    thanx for help,
    michael

  • Custom splash screen only shows up when command line is used...

    Hi,
    Everything in my Java web start application works perfectly but, the custom splash screen only shows up when command line is used ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"), if I use the shortcut on the desktop or in the start menu, the Java 7 splash screen shows up (tested under Windows Vista and Seven). Does someone have any clues?
    Thanks...
    My jnlp file :
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="6.0+" href="AcSent.jnlp">
      <information>
        <title>AcSent : Commande de repas</title>
        <description>AcSent - Commande de repas</description>
        <vendor>AcSent</vendor>
        <homepage href="http://www.xxx.eu" />
        <icon href="acSentIconBiseau.png" />
        <icon href="splashAcSentRC.png" kind="splash" />
        <shortcut online="true">
          <desktop />
          <menu submenu="AcSent" />
        </shortcut>
      </information>
      <security>
        <all-permissions />
      </security>
      <resources>
        <j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" max-heap-size="128m" />
        <jar href="AcSentJnlpProgressIndicator.jar" download="progress" />
        <jar href="AcSentJnlp.jar" main="true" version="1.0" />
        <property name="jnlp.packEnabled" value="true" />
        <property name="jnlp.versionEnabled" value="true" />
      </resources>
      <application-desc name="AcSent" main-class="eu.acsent.jnlp.AcSentApplication"
           progress-class="eu.acsent.jnlp.progressindicator.CustomProgress"> 
      </application-desc>
    </jnlp>

    Hi again,
    I made some researches :
    - The link in the generated shorcuts ("C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp "C:\Users\Arnaud\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\46\69c1e9ee-1f252d1a") is not the same as the one I use in the command line ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"). Is there a way in the the JNLP file to tell how to generate shortcuts (not the icon, etc., but command line options)?
    - This sample (https://blogs.oracle.com/thejavatutorials/entry/changing_the_java_web_start) displays the splash screen when I click on the the generated shortcuts (I use Windows 7). I have copied the ButtonDemo jar file and the JNLP file on my IIS web server (Windows 2008 Server), this time the splash screen does not show up when I click the generated shortcuts but always shows up when I use the command line. Can someone tell me if it is a trouble with IIS ?
    Thanks again...

  • Custom splash screen not appearing in the Dynamic created jnlp()

    Hi,
    I am not able to show my custom splash screen while starting the webstart application, instead getting the "sun webstart logo". I am dynamically generating the jnlp file using jsp (struts application). Application is working perfectly except custom splash screen. Below is my jsp which will generate the jnlp on fly. The test.gif file is in place.
    <% response.setContentType("application/x-java-jnlp-file");
      response.setHeader( "Pragma", "no-cache");
      response.setDateHeader( "Expires", 0 );%>
    <%@ page import="java.io.*" %> 
    <%String baseURL = WebUtil.webUrlParser(request.getRequestURL().toString(),request.getContextPath(),request.getServerPort());%>
    <jnlp      spec="1.0+" codebase="<%=baseURL%>/cs_jnlp">
    <information>
        <title>Launching JNLP</title>
        <vendor>Satyasai</vendor>
        <icon href="/images/test1.jpg"/>
        <homepage href="docs/help.html"/>
       <description>test</description>
            <icon kind="splash" href="images/test.gif" />
       </information>
          <security>
            <all-permissions/>
         </security>
         <resources>
       <j2se version="1.6+"/>
       <jar href="<%=baseURL%>/cs_jnlp/AppLaunch.jar"/>
      </resources>
           <application-desc main-class="Launch" >
           <%
           int roleId = (Integer)session.getAttribute(Constant.USER_TYPE);
           String sessionID=(String)request.getAttribute("SELECTION_SESSION_ID");
           String action=(String)request.getAttribute("action");
           String userID = (String)session.getAttribute(Constant.LOGIN_ID);       
           String sessionType=(String)request.getAttribute("sessionType");        
           %>
           <argument><%=sessionID%></argument>
           <argument><%=action%></argument>
           <argument><%=userID%></argument>
           <argument><%=sessionType%></argument> 
    </application-desc>
    </jnlp>If I use normal servlet - jsp using RequestDispatcher to forward request to a jsp which on fly creates jnlp, it shows the my custom splash screen. I am not very sure where is the difference. If I look at both generated jnlps they are almost one and the same. Can any one throw some insight on this.
    Thanks & Regards,
    Satyasai

    Hi Andrew,
    Thanks for your response.
    1. I have launched it number of times but no luck.
    2. I have written a jsp (using servlet + jsp no struts frame work) which will create jnlp on fly, which is showing my custom splash screen. If you refer in the initial post, it is not working with struts kind of framework. See the below jsp which shows custom splash screen. It worked without href.
    3. All jnlps are well formed and perfectly working in my development environment. For security purposes I have not shown some of the texts and logos.
    <% response.setContentType("application/x-java-jnlp-file");
      response.setHeader( "Pragma", "no-cache");
      response.setDateHeader( "Expires", 0 );%>
    <%@page import="java.util.ArrayList" %>
    <%
    String client = (String)request.getAttribute("clientLocation");
    String fileNames = (String)request.getAttribute("filenames");
    String url= (String)request.getAttribute("serverFilesLocation");
    String baseURL = "http://"+request.getLocalAddr()+":"+request.getServerPort()+request.getContextPath();
    %>
    <jnlp spec="1.0+" codebase="<%=baseURL%>/sw_jnlp"> 
      <information>
        <title>Softwares Download</title>
        <vendor>test</vendor>
        <icon href="/images/test1.jpg"/>
        <homepage href="docs/help.html"/>
       <description>Software Downloads </description>
            <icon kind="splash" href="images/logo_small.gif" />
       </information>
       <update check="timeout" policy="always"/>
          <security>
          <all-permissions/>
      </security>
      <resources>
        <j2se version="1.6+"/>        
        <jar href="mod.jar"/>  
      </resources> 
      <application-desc main-class="InstallSW">
      <argument><%=client%></argument>
      <argument><%=fileNames%></argument>
      <argument><%=url%></argument>
      </application-desc>
    </jnlp>Thanks & Regards,
    Satyasai

  • Custom Splash Screen for HTML Export?

    We're finding our customers are getting confused with the HTML screen that initally displays a single button to play our Captivate lessons. Is there any way inside Captivate to add some context to that screen?
    TIA
    Retiarius

    Hello,
    I read your postings here and I did what you proposed.
    Nevertheless the splash screen doesn't show up.
    I'm using Java 1.4.1, Web Start 1.2; the jnlp file
    looks like that:
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp codebase="http://venus/example-client/" href="example.jnlp">
    <information>
    <title>Example</title>
    <vendor>My Company/vendor>
    <description>JBoss Client</description>
    <icon href="splashscreen.jpg" kind="splash" />
    </information>
    <security>
    <all-permissions/>
    </security>
    <resources>
    <j2se version="1.4+"/>
    <jar href="example-client.jar" main="true"/>
    <jar href="jbosssx-client.jar"/>
    <jar href="concurrent.jar"/>
    <jar href="jboss-client.jar"/>
    <jar href="jboss-common-client.jar"/>
    <jar href="jboss-j2ee.jar"/>
    <jar href="jnp-client.jar"/>
    <jar href="log4j.jar"/>
    <jar href="datepicker.jar"/>
    <jar href="jcommon-0.7.1.jar"/>
    <jar href="jfreechart-0.9.4.jar"/>
    <jar href="xercesImpl.jar"/>
    <jar href="xml-apis.jar"/>
    <jar href="xalan.jar"/>
    <property name="java.security.auth.login.config" value="http://venus/example-client/auth.conf"/>
    </resources>
    <application-desc main-class="com.mycompany.ui.Example"/>
    </jnlp>
    any idea why webstart doesn't use the custom "splashscreen.jpg"?
    a properly splashXXXXX.jpg has been created in .javaws/cache/splashes, as well as an entry in splash.xml.
    thanx for help,
    michael

  • I would like Firefox to show a splash screen immediately, whenever I start it or click on a link while it is not running.

    Firefox loads fairly slowly, in my opinion. It's worth the wait, but I'd like to at least know that it's loading, so I don't have to sit there wondering if I should click the link again. I tried the Splash add-on a few versions back, but found that the splash screen did not appear until near the end of the loading process, which is nearly useless. What is needed is something that pops up immediately after I click a link or a shortcut. Is there any way to configure this?

    Firefox should open in a few second. If it takes tens of seconds or even minutes then you may have a problem with an extension or another profile issue or security software that is monitoring Firefox too strictly.
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    Create a new profile as a test to check if your current profile is causing the problems<br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Some games to not continue after splash screen.

    I've already asked it on answers.microsoft.com but didn't get any reply. So, thought I would ask here.
    What I've tried:
    App troubleshooter
    sfc /scannow
    Answers in http://superuser.com/questions/562188/windows-8-metro-apps-wont-load
    also, I've tried some technet links but in vain.
    I've installed two games - Sonic Dash and Despicable Me 2:Minion Rush. Both of these games to not work after splash screen and they get minimized.
    I've checked the event log and found this
    Activation of app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational
    log for additional information.
    And full details here
    Faulting application name: Template.exe, version: 2.0.0.0, time stamp: 0x5492b318
    Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53086d7c
    Exception code: 0xc000027b
    Fault offset: 0x000fb152
    Faulting process id: 0x1418
    Faulting application start time: 0x01d0227a62078008
    Faulting application path: C:\Program Files\WindowsApps\SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c\Template.exe
    Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
    Report Id: 9fbff746-8e6d-11e4-a383-c0cb38d6092f
    Faulting package full name: SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c
    Faulting package-relative application ID: App
    Apparently it has something to do with remote procedure call. When I open the other game, I get same errors as the above, the only thing which has changed being name of the app.
    Graphics shouldn't be a problem since these games have ALREADY run once, but not now, and I have other heavy-graphic games like Asphalt 8 Airborne which still WORKS.
    I've also tried re-installing but in vain, duh. Looking for help badly. I'd appreciate any help.

    Sorry. Those two links too didn't work. I did all that was instructed in them. However I really appreciate your effort in solving my problem.
    I checked the event log in the path which you asked me to and got this
    Activation of the app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App for the Windows.Launch contract failed with error: The remote procedure call failed..
    And a detailed view
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
    <EventID>5961</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5961</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-28T04:44:28.735933800Z" />
    <EventRecordID>71148</EventRecordID>
    <Correlation />
    <Execution ProcessID="1060" ThreadID="5520" />
    <Channel>Microsoft-Windows-TWinUI/Operational</Channel>
    <Computer>Amit</Computer>
    <Security UserID="S-1-5-21-66860032-2800664797-2745505841-1010" />
    </System>
    - <EventData>
    <Data Name="AppId">SegaNetworksInc.56538047DFC80_as33fap47kd3c!App</Data>
    <Data Name="ContractId">Windows.Launch</Data>
    <Data Name="ErrorCode">-2147023170</Data>
    </EventData>
    </Event>
    Can the error log be of some help?

  • I keep getting an audi add as a background or splash screen when I bring up my home page (simpatico msn) how do I get rid of it?

    when ever I start firefox my home page opens and I have the standard home page but lately I have been getting an Audi ad as a splash screen behind my home page window, my home page is Simpatico Canada

    The settings for the warning messages have been removed from the user interface (Bug 513166).
    You need to change the related security.warn_* prefs directly on the <b>about:config</b> page.<br />
    Filter: security.warn
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • How to display different Splash Screen depending on the Locale?

    Hi,
    I have a splash screen which is working fine.
    I want to display different spalsh screen depending on the locale the user has.
    Is this possible.
    I can display different Title,Description and the text of the short-cut icon on desktop and startup Menu based on the locale by mentioning it in the JNLP and altering my browser settings. I am not able to use the icon and splash screen corresponding to the specified locale. How to do this?
    EX:
    <information>
    <title> In english</title>
    <description> In english</description>
    <shortcut online="true">
    <!-- create desktop shortcut -->
    <desktop/>
    <menu submenu="My Project in English language"/>
    </shortcut>
    *<icon kind="shortcut" href="images/icon_english.gif"/>
    <icon kind="splash" href="images/splash_english.jpg"/>*
    <!-- locale="nl-NL" specifies dutch -->
    </information>
    <information locale="nl-NL">
    <title> In Dutch</title>
    <description>In Dutch</description>
    <shortcut online="true">
    <!-- create desktop shortcut -->
    <desktop/>
    <menu submenu="My Project in Dutch language"/>
    </shortcut>
    *<icon kind="shortcut" href="images/icon_dutch.gif"/>
    <icon kind="splash" href="images/splash_dutch.jpg"/>*
    </information>
    *Now here i am not getting the splash_dutch screen for the locale "nl-NL"(Dutch) and i am getting splash_english screen.
    Can we acheive this?*

    Hi anjali...
    I have problem with splash screen..
    here is my jnlp file
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="http://localhost:8080/MyProject">
         <information>
              <title>MyProject1.0</title>
              <vendor>none</vendor>
              <description>Application Launcher For MyProject1.0</description>
              <description kind="short"></description>
              <offline-allowed />
              <icon kind="splash" href="images/Splash_MyProject.jpg" width="560" height="300"/>
         </information>
         <resources>
              <jar href="SwingApplication/mysql-connector-java-5.0.6-bin.jar" />
              <jar href="SwingApplication/MyProject1.0.jar" main="true"/>
              <jar href="SwingApplication/liquidlnf.jar" />
              <j2se version="1.6+" java-vm-args="-Xms32M -Xmx256M " />
         </resources>
         <security>
              <all-permissions/>
         </security>
         <application-desc main-class="com.mobius.ui.MainWindow">
              <argument>production%0%3#com.mysql.jdbc.Driver#MyProject4%jdbc:mysql://10.100.1.89:3306/MyProject4%MyProject%info123#MyProject2%jdbc:mysql://10.100.1.89:3306/MyProject2%MyProject%info123</argument>
         </application-desc>
    </jnlp>my post is in
    http://forum.java.sun.com/thread.jspa?threadID=5298381
    http://forum.java.sun.com/thread.jspa?threadID=5298466
    I am in big problem Help me...
    Edited by: arunnprakash on May 22, 2008 1:28 PM
    Edited by: arunnprakash on May 22, 2008 1:28 PM

  • Newsfeed & About Me links return 404 and MySites root is IIS7 splash screen

    I am building the SharePoint 2013 farm, and I have configured and installed both the default SharePoint site and the MySites site. For the default site I used this article: technet.microsoft.com/en-us/library/ee806885.aspx and technet.microsoft.com/en-us/library/cc263094.aspx,
    and I chose the Publishing Portal template. For the MySites, I used this article: technet.microsoft.com/en-us/library/ee624362.aspx I have placed both applications in the same App Pool.
    When I go to my SharePoint site, my name appears correctly in the drop down menu. When I browse to MySites root site I get the IIS7 splash screen, and when I click on the Newsfeed or About Me links from my SharePoint web site, I get a 404:
    Server Error in '/' Application.
    The resource cannot be found.
    Description:
    HTTP 404. The resource you are looking for (or one of its dependencies)
    could have been removed, had its name changed, or is temporarily unavailable.
    Please review the following URL and make sure that it is spelled correctly.
    Requested URL: /Person.aspx
    I have built and rebuilt both sites numerous times in Central Administration, synched the users profiles with Active Directory and tried changing the Default Document property in IIS. I have also rebuilt the cache several times. I am about at my wits' end,
    and need to know what else I can try. Thanks.

    One thing I do get relatively frequently, but cannot find an answer for is this:
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Foundation
    Date:          2/18/2014 1:28:02 PM
    Event ID:      6398
    Task Category: Timer
    Level:         Critical
    Keywords:     
    User:         
    Computer:     
    Description:
    The Execute method of job definition Microsoft.SharePoint.Diagnostics.SPDiagnosticsMetricsProvider (ID 578f8f40-bf35-41af-b249-0f78fb3aa4b5) threw an exception. More information is included below.
    An update conflict has occurred, and you must re-try this action. The object SPWebService was updated by , in the OWSTIMER (1612) process, on machine .  View the tracing log for more information about the conflict.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
        <EventID>6398</EventID>
        <Version>15</Version>
        <Level>1</Level>
        <Task>12</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-02-18T19:28:02.756771300Z" />
        <EventRecordID>2291582</EventRecordID>
        <Correlation ActivityID="{4F8A759C-5256-2078-13CC-5B77C3611B18}" />
        <Execution ProcessID="1772" ThreadID="1852" />
        <Channel>Application</Channel>
        <Computer></Computer>
        <Security UserID="S-1-5-21-2016900387-1890534406-924725345-7507" />
      </System>
      <EventData>
        <Data Name="string0">Microsoft.SharePoint.Diagnostics.SPDiagnosticsMetricsProvider</Data>
        <Data Name="string1">578f8f40-bf35-41af-b249-0f78fb3aa4b5</Data>
        <Data Name="string2">An update conflict has occurred, and you must re-try this action. The object SPWebService was updated by , in the OWSTIMER (1612) process, on machine .  View the tracing log for more information about the conflict.</Data>
      </EventData>
    </Event>
    Could this be related?

Maybe you are looking for