Split valuation conflict

Folks,
2 questions related to split valuation:
1) We've valuation level at company code and split valuation active. We have set valuation type A as a default in tcode OMWC. In the stock determination rule, we've set that valuation type A and B can be assigned to a delivery. Now, the default valuation type A will prevent B from doing GR as the default in the PO is set to A. There is no possibility to make different settings in OMWC for external PO's and internal PO's. How can we arrange that a valuation type different from the default can be processed during GR. How can we handle multiple valuation types in 1 PO automatically (so not splitting the different types into different PO-items)?
2) When entering a specific batch with a different valuation type then the default A, system gives a hard error. Is it possible to have the valuation type of the batch overrule the default?

Do you have the material master accounting view s created for A and B valuation type?
What is the exact message and its message number?

Similar Messages

Split valuation: how to close an annual PO

Dear Experts,
We need to change a non-split valuated material to split valuated mode by using the Valuation category 'X'. I have done the required config. and cleared all of the stocks and reservations. Now we have one "annual" purchase order left (line per month) that is partly closed and partly open. I flagged all of the items as completely delivered and invoiced but it still comes to the material Display errors log. Do I need to throw all of the items to the carbage bin or even archive the PO before I can change the Valuation category in the material master?
Thanks in advance!

Hi
If the PO is partially open ensure that the PO order qty is changed to Delivered and invoiced qty and then flag the delivery completed and final invoice indicator and then flag the item for deletion.
Now you try to activate the valuation category.
Usually if we have such requiremnt of activating the material for split valution, always you create a new material and falg the old material for deletion. This will be helpful in the reporting parts also.
You donot have to face all these problems in that case.
Thanks & Regards
Kishore

Split valuation with batch management and project stock

Dear Gurus,
I need to combine two following requirements:
1. split valuation with batch management (valuation type = batch number)
2. project stock
These two functionalities work fine separately but not together.
I receipt PO for material with spiit valuation on a batch level into a project stock. Posting is OK and material document (MSEG table) seems to be OK (batch number, valuation type and project stock are in this table). The problem appears when I want to display material in this valuation type (MM03) or batch (MSC3n). They don't exist!!! Short investigation showed that during goods receipt table MBEW (valuated stock) was not updated with this valuation type.
But If PO is receipt into normal stock first and then posted into project stock everything is OK.
Have you had or heart about such issue? I would appreciate any sugestion.
Thsnks in advance.
Marcin Bernat

Hi,
As you already know ,u are using project stock and doing goods receipt against project, stock table QBEW will be updated and not MBEW. MBEW only updates in case of plant stock valuation. If u receive any goods against project stock it does not contribute to plant stock. Irrespective whether your material is managed in split valuation or not, If it is received against project stock it only updates QBEW. There is no need to update MBEW, if u r using split valuation in project. QBEW also have valuation type as another level like MBEW. If u want to see material price for project stock, it can be seen in QBEW -valuation type and not in mm03.
As u r receiving goods against project stock this is d only reason QBEW is updated and not MBEW.
QBEW will store all information like MBEW for batch number, valuation type and project stock assignment.
Hope it answers your question.
Deepak.

Split Valuation For Material Having No Open PO & Stock

Hi Experts,
Will somebody throw light on split valuation where there is no any open PR, PO & Stock for that material but system does not allow to make material split valuated.
System shows error meassge giving old PO nos list.
(Logically all these POS whole business transcations/cycle is completed )
I want split valaution to be done to the material whose stock is nil also there is no any open PR,PO for that plant in the system.
But I dont prefer to delete line items of the old PO for doing the split valuation.
Please suggest solution
Thanks in advance.
Ramesh
Edited by: RameshChandra Soni on May 17, 2008 11:46 AM

Hi,
You can find severaé threads about this on this forum.
Some hints:
1. In MM02 try to set the split valuation > Save > SAP will give error message > Push the appearing 'Display errors' button > SAP will say what hinders you from being able to set the split valuation.
2. As I remember stock has to be zero in current and previous period. (You can set your stock to zero in the previous period using MB1A201posting date in the past; after having set split valuation you can reset your stock level via MB1A+202).
3. IMPORTANT: you have to archive all existing batch records.
4. etc
BR
Csaba

Split Valuation- Net Price Problem in Po

Dear All,
       The Split Valuation confiigured for Material as
       Val Type(A)- Ex Procurement
       Val Type(B)- Internal House Production.
assigned Valuation Category(C) with A & B and with Plant.
In Material Master Accounting view enter all the reqired inputs
First i Created PR and its ok and go for PO, it asking " net Price" and entered the Net Price, again it showing error msg " net price greater than 0.
Note: for this material PIR, Source List require or not.
       so what i done a mistake? and can any one explain it.
Thanks

net price always remains exclusive freight/delivery cost.
the freight/delivery cost gets added on the net price
so going by logic the calculation which ur system is showing is perfect.
"Re PO: As per you, only net value will be displayed in PO and effective price will not display . why?"
this is becoz it shows the price of that particular material per unit.
regards,
indranil

Split valuation Issues in PO

Hi Consultant,
I have one issue with Split valuation -configuration. I have maintained all the configuration setting related to split valuation but whenever I will create PO system does not pick-up the price (different price based on the valuation type in material ) .
The following configuration have done in IMG:
i) Activated split valuation
II) Maintain valuation category under this group in to three valuation types.
III) Activate Plant, (assign into valuation type)
Maintain condition table with key combination (material/plant/price/val.type)
Assign into condition type PB00
Maintain condition records in MEK1 (for this material)
Maintained one header material with valuation category then same material has extended to different valuation types and prices.
Is it necessary to maintain Info record for the split valuated material?
Why system does not valuate the price automatically based in the valuation type changes made in PO?
Regards,
Thiru

Hi Consultant,
I have one issue with Split valuation -configuration. I have maintained all the configuration setting related to split valuation but whenever I will create PO system does not pick-up the price (different price based on the valuation type in material ) .
The following configuration have done in IMG:
Hi, Thiru,
Please check the settings for configuration of split valuation;
If you want to use split valuation, activate the settings found in customizing for material management under
Valuation and Account Assignment--> Split Valuation-->Activate Split Valuation
Define valuation category and a valaution type.
Valuation category determines the criteria for distinguishing between stocks.The valuation type decribes the possible features of the partial stocks.
You define valuation category, valuation types and assignment of types to categories in customizing for material management
Valuation and Account Assignment--> Split Valuation-->Configure Split Valuation
Also first check you material master record with MM03 by selecting the desired organization levels and see whether the valuation prices are showing as per desired valuation type.
Also would like to add that info records are not required in split valuation.
Regards,
Tushar Patankar

SPLIT VALUATION - EXT/INT PO Indicator- OMWC

Hi,
     Could someone help me understanding this?
     While Configuring Split Valuation, for a Valuation Type I've set the 'EXT PO' indicator as '0' and associated it to a Valuation Category( No default Valuation Type has been set). After associating the Valuation Category and the Valuation Types to a material, I tried creating a PO for the same. It allowed me to create a PO, with the Valuation Type for which the EXT PO is set as '0'.
What I inferred from the settings is that it should have thorwn an error. Have I inferred correctly or else am missing out somewhere. Also, please help me to understand the significance of 'Acct Category Reference' in 'OMWC' Tcode (P.S: Could appreciate the use of Acct Categ Ref in Automatic Account Determination ie Valuation Class determination. But the Significance of Acct Categ Ref. in Split Valuation Type still remains vague.)
TIA,
Regards,
S. Satish

Hi Prabhu,
Thank You very much for your time.
                  The Valuation Type is as follows
                   INDI     EXT PO Indicator '0'.
                The Valuation type 'INDI', got defaulted from the Inforecord in the PO created. The PO is a standard PO.
              Since for 'INDI', the EXT PO is set as '0', ie Not allowed, should I expect an error in this case ( In actual it did not occur. I            suppose it should. Correct me if am wrong).
Acct category Reference is concerned:
     Is it that the Acct Category Reference chosen in the Valuation Type configuration, would surpass the Acct Category ref set for the Material Type?
Ie) if the Acct category ref for 'ROH' is say 0001. If I assign this Material Type for a material and still could I assign a Valuation Category associated to say HALB ( I know in real time, its not possible. But would like to understand if the system validates).
Regards,
S. Satish

Split valuation for non-valuated materials

Hi dudes,
We are implementing SAP for our Subcontractor.
our SC receive all components from our company ( on free ) but sometimes they purchase the same material themselves for other uses. so we decided to use split valuation to separate valuated and non-valuated materials.
I did configuration and created 2 valuation type ( valuated - nonvaluated )
when I create Purchase order it askes for valuation type but even when I use non-valuation type in PO it asks for price!!!!
do any of you have used split valuation for this target?
have the same problem?
what should I do actually??

Hi,
Is someone in the subcontracting plant going to do a process order on the materials you send them? Or are you only going to track the finished inventory once it reaches your plant?
In the first case:
1) Create a STO to the SC plant. This stock will have to be priced.
2) Inventory reaches SC plant. They perform production process.
3) finished inventory is sent using another STO.
2nd Case:
1) Create a SC vendor using the SC plant as a vendor.
2) Create a SC PO to this vendor using this vendor and transfer goods to him. In this case, goods are transferred for 'free' as they really belong to you and not to the SC
3) Once the production process is over and the finished product is sent back to you, do a GR. The raw material sent to the SC will be consumed.

Batch Management with Split Valuation

Hi
We have a scenario in which we have split valuation for a material and it is also batch managed. In the business process there is regrading step where the material from one valuation type (A) needs to be transferred to a different valuation type (say B). Before regrading each of these grades have different batch nos.
I tried to do a transfer posting (mvmt type - 309) and put the material (from Val type A to B). It asks for batches for both A and B.
We can give batch of A (the from material), but we want a new batch to be created for the "to" material.
How does one go about that?
Deepak

Deepak
I think that you will find that the batch managemenmt is either internal or external at either plant or material level and so if you are changing the valuation in the same plant I do not think that the system will allocate a batch number for you and that you will have to tell the system what the batch is.
I hope that this helps

Material maintained in split valuation and batch management

Dear Seniors,
I have maintained a material with both split valuation and batch management. If i check in MMBE, only batch management is getting preference. Valuation type is not coming. Why is it so ? why maintaining both is not possible in SAP ??? kindly explain me please.
Regards,
JanaMM

If you Mantain both Split valuation as well as batch mgmt for a material, then all stock reports will show "Batch " and Not valuation type since batch is relevant to inventory mgmt and split valuation is relevant for account determination and valuation. , the only report which wil show you both is BMBC(batch info cockpit).
You can however run MB5B w.r.t valuation type in the input screen.
In such cases , The Valuation Type forms a part of the batch master which you can see in MSC3N .

Split Valuation Material Cost Estimate into COPA

Hi all,
Is there any way how we can transfer the split valuation material cost estimate into COPA?
I checked the actual line items, there is no "valuation type / batch" characteristics there.
Is this the main cause?
Please kindly suggest on the best way to solve this issue
Thank you very much
Regards, Erwin

Hi, Ajay
Does this mean that, even though i manage to create the valuation type as characteristic in COPA, i won't be able to get 2 different cost estimate based on valuation type into COPA?
Hm, then, are there any solutions which can be done to solve this issue?
The client needs a COPA report which can show the breakdown of the sold materials cost estimates
As usual, thank you very much for your help
Regards, Erwin

Split valuation while Valuation is on Company Code Level

Dear Experts
I have tested before the split valuation while valuation is the plant level ... the problem now that the FI consultants need to work with valuation on company code level ..
I have activated the categories for the company code , but When i tried to crate Material the field Valuation Category is just displayed and i can't enter any value in it ... how every i have created a new field reference to make it mandatory .. still the same problem
so what is the solution ?
Please Advice

Solved by checking the two indicators : Value Update and Quantity Update in the quantity folder in the attributes of the Material Type
Edited by: Sap Sap on Apr 14, 2010 11:28 AM

To extend material master in condition that split valuation.

I want to valuate the material at two different valuation class
if the material is produced internally and procured externally.
So I use split valuation function.
I created accounting view using valuation category at plant level and
I extended accounting view using valuation type.
I tried to extend material master for other plant in condition that
I didnu2019t check batch management in purchasing view
but I mat error message u201CIndividual batch valuation not possible hereu201D(M3184).
To extend material master for other plant, Should I check batch management
in purchasing view ?

Hi,
Select the batch management indicator on purchasing view, press F1 button and check technical details. If the field is:
MARA-XCHPF --> batch management is active at client.
MARC-XCHPF --> batch management is active at plant level
Please check SAP online help on batch level:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/25/2838714f7811d18a150000e816ae6e/frameset.htm
Batch Levels
Plant level
The batch number is unique in connection with the plant and material.
The batch number is only known in the plant in which it was created if the stock is transferred to another plant, the batch is unknown in the recipient plant and the system does not adopt any data. You have to recreate and specify the batch in the receiving plant; that is, the same batch number may have different specifications in several plants.
Material level:
The batch number is unique in all plants in connection with the material.
The same batch number has the same meaning for the material in all plants. One batch number cannot have different specifications in different plants. During stock transfer to another plant, the specification of the batch is known in the destination plant even if the batch is placed into storage in that plant for the first time.
Client level:
The batch number is unique in the whole client. A batch number can only be assigned once in the client. You cannot assign the same batch number for different materials.
The batch number is only unique at the chosen level.
If your batch maagement is valid at client / material level you defined it once in table MARA and it is valid for all your plants - that's why you get it automatically (if this is the reason in real).
Regards,
Csaba
Edited by: Csaba Szommer on Nov 7, 2009 5:13 PM

Purchase Info record - Split valuation

Hi Experts,
I have a problem in working with split valuation.
I have a material with split valuation with valutation types Domestic and Import.
Same vendor supplies both the valuation types material.
I want to create purchase info record for two valuation types with the same material, vendor,purchasing org.,Plant.
I am able to create info record for only one valuation type.
Is there any way that I can create info record for both the valuation types for a vendor,material,Plant and Porg.?
Thanks in advance.
Best regards

Dear Lakshmi,
I'm not sure how u create an info record until val,type level , as per i know valuation type is the information in the Purh.Org data in info record. So when maintaining info record you got combination of vendor,material, plant, p.org, and info rec category.
The material per valuation type value will updated to the mat master when u done GR,
So you dont need to maintain the value in info record, because in the material accounting level there'll be 2 valuation type for that material which contain both value for domestic and others.
Edited by: w1n on Apr 9, 2008 6:25 PM

Vendor Consignment for Split Valuated Materials

Dear All,
We have a scenario where in our material is split valuated,we have 2 valuation type import and Domestic, both the valuation type is being supplied by a single distributor, the price of the import valuation type is different from the price of domestic valuation type.
We are trying to configure consiginment process for split valuted material.While maintianing consignment info record, we are not able to maintian separate info record for import and domestic valuation type (since material /vendor/plant/purchase organization are same).Hence while doing goods issue using 201 K, the system is taking the price from the info record.Is there any solution available, to post the goods issue for import valuation type at a different price and domestic valuation type at different price.
Thanks,
Vairavan.

How system will pick the info record price for movement type 201 K ?
As of my knowledge, system will create accounting entry as per the material price (MM03 - Accounting 1 view for the valuation type)
It may create problem for 411 K movement type, but not for movement type 201 K.
If you need to pick different price as per valuation type, then you can do this via condition table.
Have a look into the discussion Info record Price on the basis of Valuation type

Split valuation conflict

Similar Messages

Maybe you are looking for