Split view default

I have posted an "Idea" about how a server-side page should be opened. Please cast your vote.
In my opinion, it should work as it always has - it opens in whatever you had last selected. But if forced to choose one, I would say SPLIT VIEW.

Done.
For those that have issues with the forum navigation, it's here: Split view default

Similar Messages

Can you set DW to always show split view?

This is not a major problem but an annoying thing and I can't seem to find. I almost always work in split view - never design view. Yet DW seems to default to design view. Even if I have previously edited a page in split or even code view, the next time I open that file (if I have closed and opened DW in the meantime) it opens in design view.
I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Anyone know how to change this?
Thanks!
Ellie

>>I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Yes, the same problem started in CS4-Mac for me.
Just for kicks, I opened my custom workspace a moment ago. I then opened a document to split view, then resaved that setup as a new custom workspace.
Upon reopening Dreamweaver the next time, it remembered my split view setting. However, the time after that, I was back in Design view.
This seems to be pretty buggy.
Hopefully someone will post a solution.
...pt

DW code view custom highlight color from design view (split view)

I would like to change the "Code view" highlight color from it's default to something more contrasty ... so while using "Split view" - when I select an element in "Design View" the corresponding code in "Code view" would be easier to find ...
Anyone knows how to customize this setting wit DW CS5??
Thanks!

I would like to change the "Code view" highlight color from it's default to something more contrasty ... so while using "Split view" - when I select an element in "Design View" the corresponding code in "Code view" would be easier to find ...
Anyone knows how to customize this setting wit DW CS5??
DW Code View uses the Selection colors defined for your Operating System.
If you don't know how to change that, which OS and version are you using?
HTH,
Randy

DW CS5 - Split View annoyance

Hello, everyone.
For some reason, my DW has "Split Vertically" default selected every time DW loads. When I want to split view, it's always initially vertically split.
This is annoying me. I would like for the split to be horizontal, always, and if I want a vertical split THEN I'll choose it.
Can anyone tell me how to turn off the default setting for Vertical Split??
Thank you,
^_^

WolfShade wrote:
Is there a reghack that I can do to turn this default to off???
YES, THERE IS!!!
As always, the usual cautionary warning to back up your registry before making any edits to it. The registry can really screw your day if you edit the wrong thing.
Close DreamWeaver, if open.
Click on Start > Run, and enter regedit in the field and hit ENTER.
Navigate to HKEY_CURRENT_USER > Software > Adobe > Dreamweaver CSx > Settings (where x is the version of DW you have installed).
In the right pane, locate SplitViewOrientation and double click it.
Change the value from vertical to horizontal, save, exit regedit. Open DW, open a file, click on VIEW, and "Split Vertically" will not be checked.
^_^

Split View - Design side jumps

I've come to the conclusion that the most exhausting part of
working with Dreamweaver is chasing down my previous location on
the Design side of the Split View after making a code change. What
is it witth that? Example: If I select an area on the design page,
go into the code side and, say, change a local style cattribute (or
do just about anything for that matter) the page in the Design area
jumps to the bottom of the document. I'm tired of having to scroll
back to where I was every time I make a change in the code. I've
been dealing with this forever and just wrote it off as a quirk but
I need to know: Is there a way to fix this?
Thanks.
Cayce

The settings you removed are NOT DW's default settings. In
other words, the
only way that *.htm and *.html could have gotten into the
Open in Code View
field would be if you had put them there.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"MJ-78" <[email protected]> wrote in message
news:giha9n$r28$[email protected]..
>I had that same problem, but I just fixed it by going to
Edit > Preferences
> >
> File Types/Editors. In the first field, labeled "Open in
Code View", I
> removed
> the file extensions html and .htm, and now the split
view and design view
> are
> no longer greyed out. Code view is still available, too.
>
> I had looked at that setting before, but it wasn't clear
that "Open in
> code
> view" meant that it would be impossible to view the
files in Design view.
> So
> they definitely need an improvement for the user
interface there.
>

Dreamweaver 8.0.2 -- code view is totally screwed, so is design view. Split view works fine.

I just started having an extremely annoying issue in DW8-XP.
The code view is completely messed up. I can switch to code view,
but nothing is there. Just a ghost of the split view I was just in.
If I open a new file (like css file) in code view, I see a ghost of
the last view. Since css files don't have a split or design view,
I'm screwed. Cannot firgure out how to delete the config file. Do
you think this would help? Would it erase any settings I have
currently set?
I tried switching to a default layout, restarting and all. No
luck. Little help? :D

Restart the system.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"purefusion" <[email protected]> wrote in
message
news:eqntd2$chq$[email protected]..
>I just started having an extremely annoying issue in
DW8-XP. The code view
>is
> completely messed up. I can switch to code view, but
nothing is there.
> Just a
> ghost of the split view I was just in. If I open a new
file (like css
> file) in
> code view, I see a ghost of the last view. Since css
files don't have a
> split
> or design view, I'm screwed. Cannot firgure out how to
delete the config
> file.
> Do you think this would help? Would it erase any
settings I have currently
> set?
>
> I tried switching to a default layout, restarting and
all. No luck. Little
> help? :D
>

What happened to Split View?

I wanted to watch the Macword Keynote today to see what features Steve put out there that we don't currently have.
One is "Split View" email:
This allows us to see the email message in the current window with the email list at the top, and the mail message at the bottom.
I also wanted to put out there that I can confirm there are 2 extra tabs at the top of iTunes that they previewed, the second to last on the right vaguely makes out "ringtones".
Regardless, at the bottom there is an additional green color category that you cannot make out the text to.
Back to the question... What happened to split view on email?!?!?

It's just annoying, he really spent some time on it.
Hopefully in an update.

Why can't I type more than one space in a split-view in DW

Say, I am an a split view in a Dreamweaver CS5 and I'm typing in the right view (whatever it's called), but for some reason I can't type more than a single space there. Can I disable that?

Thank you, Curtis. One thing that needs to be added to your post is that one has to restart DW for this setting to take effect. (Well, that may be a bug.) But it still doesn't fix the issue (read below.)
As for the other two comments, I hate when people try to pigeonhole something without even trying to understand someone's situation. Did I say that I would be using it for a layout?
Here's why I need it. Say, I'm working on typing a paragraph of text. My preference is to have DW in a split-view, with the HTML being displayed on the left and the "result" view on the right. That view on the right allows me to type in text directly into the page w/o worrying about HTML semantics -- very handy feature, except one little detail. Say, I have the following snippet of text, "This is some sample text" and I want to edit out the word "some" with the phrase "very important". So I highlight the word "some" and begin typing. Everything goes well when I finish typing "very", but as soon as I put a space to begin typing the word "important", something in DW makes the resulting phrase to look like this: "This is very importantsample text" Notice that the space after "important" was removed. You see, I'm not used to adding spaces after each of my edits (and that is how 99% of word processors work in the world) so my documents started to miss spaces and it took me awhile to figure out why. I was truly hoping that Curtis' suggestion would fix the issue, but even though I can add more than a single space, DW still removes spaces for me automatically, like I just explained above.

My small split-view file manager

Hello.
I've created a small file manager with split-view. While some functionality is still missing, the manager is usable and I'm using it as my primery tool for file browsing.
You can get the browser from here http://github.com/napsy/gsfm
space - select/unselect
F5 - copy selection
F4 - rename selection
F3 - new directory
delete - delete selection
tab - change view
There is support for custom view with a config file. You put the config file inside your ~/.config directory. A sample config is provided with the source.
Sere is a screenshot: http://napotnik.info/images/gsfm.png

It's good that it's C and BSD-licensed, but I don't really see a point in GTK. I mean, there are a lot of GTK file browsers out there already, but there is no (to my mind) proper ncurses file browser written in pure C. It's just MC and vifm, all the others aren't C. So if it would be ncurses I would definetly be interested. That's just my opinion. Anyways, thanks!

HT3805 In my split view, the viewed picture is all the way to the right- only a sliver is visible. How do I get it to be centered and viewed in total?

How can I get the picture in my split view to move back to the center where I can see it all?

Lynn,
there should be. Are you perhaps looking in the system library?
The User Library should appear in the Finder's "Go" drop down menu, like this:
If your system is Lion or Mt. Lion, you will have to hold down the option-key ⌥ to make it appear in the menu.
Then look in the folder Preferences for "com.aperture.plist" and remove it.
Don't forget to quit Aperture before you do this.
Regards
Léonie

How to view rating stars on pictures in browser or split view

On an Imac aperture v3.2 I cannot see the rating stars on the pictures in browser or split view. I can only see them if i open the metadata for each individual picture. Does anyone know how to turn this feature on? My husband has a Macbook pro using the same software and he can see them.

The ratings are part of the Metadata Overlays (link goes to User Manual page with full instructions). There are seven different Metadata Overlays. It is helpful to customize each of them. The customization is done via "View→Metadata Display→Customize".
The Browser Metadata Overlay is toggle on/off with "u". "{Shift}+u" will toggle the Browser Metadata Overlay between "Basic View" and "Expanded View".
What is most likely is simply that either your Browser Metadata display has been toggled off. Try each of the toggles above, and see if that doesn't bring back the ratings. If it doesn't, you'll have to add them back to the Metadata View using the customize command above.
Message was edited by: Kirby Krieger -- link added.

Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
I went into the full screen view, edited a photo and got out of the full screen view to export it.
All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
(note: at the bottom it says 380 items displayed)
Going back to full screen view, everything looks and works as nothing has happened:
In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
At some point I saw this weirdo but have not been able to replicate it:
Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
edit: added the note under the first image

When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
Regards
Léonie

Magin change moving from Design to Split views

For some reason, the margins of my HTML page change when I
move from split view to design view. The page is a single table,
centered with <center>, but when I change views, they whole
thing shifts over by 19 pixels, from being centered starting at 309
to being centered starting at 328.
What the heck!?? Anyone know what might be causing
this?

Appearance of a vertical scrollbar?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"D Cam" <[email protected]> wrote in message
news:fbt85u$cpv$[email protected]..
> For some reason, the margins of my HTML page change when
I move from split
> view
> to design view. The page is a single table, centered
with <center>, but
> when I
> change views, they whole thing shifts over by 19 pixels,
from being
> centered
> starting at 309 to being centered starting at 328.
>
> What the heck!?? Anyone know what might be causing this?
>

Remote images not showing up in design/split view

Just recently, whenever i updated the image location from the
local site to the remote site path, the images don't get loaded
into dreamweaver how it used to.
i'm not sure if i unchecked something. the paths are correct
and they show up when i preview in browser so i know it's not that.
if anyone can help with this it will be great. thanks.

Do you have spaces in your image file/pathnames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"zgarcia" <[email protected]> wrote in
message
news:e286rc$adb$[email protected]..
> DW 8.01
>
> it's not the put action.
>
> what i normally do is compose the email on the local
site so i have the
> images
> showing, add the links etc...
> then i upload the images onto my remote server.
> after i do that, i go into the source code and do a
find/replace on the
> image
> directory. (highlight "images" and replace it with the
> "
http://www.example.com/campaign/email")
>
> now, after i do a replace all, the images would reflect
whatever is in the
> remote directory (
http://etc...) and will actually display
in the
> design/split
> view instead of seeing broken image icons as it's
currently doing.
>
> the remote site locations are correct.
>
> let me know if that helps, thanks.
>

Custom Split views don't work like the use to pre- Project 2010

Hi
Either we've lost some functionality along the way, or there must be another way of doing the following...
Up until and including version 2007, I was able to create multiple custom split views in a file (or global.mpt) where the I could specify a different Task Form (e.g., "Predecessors & Successors" or the "Work") depending on which custom
split view I selected.
In 2010 and 2013, you have to manually select the Task From you want; the custom split view won't can help you get the specific Task Form you want ((e.g., "Predecessors & Successors", "Work"). At least that has been my experience...
does anyone have a solution apart from needing to write a VBA event handler?
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

I agree with Dale. Project remembers the last set of details applied in form views such as Task Form. Using VBA event handlers you can change this behavior.
1. Open the project file on which this change should be applied.
2. In the View ribbon, click Macro command and select Visual Basic
3. If you want the details displayed in the Task Form to be applied to the current file, double click "ThisProject" node under the VBAProject(your file name) or else double click "ThisProject" node under ProjectGlobal (Global.MPT)
4. Paste below lines in the Project_Open event handler. Save the code.
Private Sub Project_Open(ByVal pj As Project)
    ViewApplyEx ApplyTo:=1, BuiltInView:=pjViewTaskForm
    WindowActivate TopPane:=False
    ViewShowPredecessorsSuccessors
End Sub
5. You can replace the last statement ViewShowPredecessorsSuccessors with another statement that is compatible with Task Form view
Sai PMP, PMI-SP, MCTS Project, MVP Project

Split view default

Similar Messages

Maybe you are looking for