SplitterPanelWidget crash using kBindAll in CS3

I want to divide a panel in 2 regions using a SplitterPanelWidget. The widget is working as expected and I can fill it with other widgets. Since I have a resizable panel in a palette I want the SplitterPanelWidget to fill the whole panel. But as soon as I set the SplitterPanelWidget Binding to kBindAll, compile the plugin and start InDesign it crashes while displaying "Calling Late Initializers..." in the loading screen (because of an access violation in WidgetBin.dll at 0x02b3dc5e, trying to read at 0x00000000).
I get this result even with a very simple panel. It always happens if the binding is set in both directions of the splitter (e.g. kBindTop|kBindBottom when using a horizontal splitter bar but not with a vertical splitter bar and vice versa). kBindAll will crash too.
This is the main part of the widget defintion in the panel of a palette:
SplitterPanelWidget
kInvalidWidgetID, // The Identifier for this Widget
kPMRsrcID_None, // The Plugin ID
kBindAll, // Frame binding
Frame(10,10,190,150)
kTrue, // Is this visible
kTrue, // Is this enabled
"", // The String value
0, // The Top Widget (0 or 1)
kTrue, // Top Visible
kTrue, // Bottom Visible
50, // Splitter Current Position
50, // Splitter Initial Position
10, // Top Snap less than this snap up
kFalse, // Should Snap up?
20, // Bottom snap more than this snap down
kTrue, // Should Snap down?
kFalse, // Splitter Direction (kFalse=horizontal/kTrue=vertical)
5, // Splitter Radius
kFalse, // Resize Splitter proportional
1, // Single Click Splitter Actions
1, // DrawXOSplitter or RedrawPallets
GenericPanelWithBorderWidget
GenericPanelWithBorderWidget
Anyone has an idea what could cause that ?

For anyone else running into this. The actual problem was this line:
kFalse, // Resize Splitter proportional
This value is actually expecting a widget-id. So if you want a specific widget to stay at the same size when resizing the whole splitter panel you would put its id there. If you want a proportional resize you need to use the value -1.

Similar Messages

Previous computer crashed without my Adobe CS3 Design Standard for Macintosh application being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help!

Since the previous computer crashed without my Adobe CS3 Design Standard for Macintosh applications being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help, I've tried using the online "contact us" with no success, unable to get in contact with a tech support agent that can assist me.

CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.

PowerPC G5 crashing with After Effects CS3

I have been having "catastrophic" crashes, that is a crash in Mac OSX where the screen goes dark and I have to hold the power key to reset the system when using After Effects CS3 on my PowerPC G5. Also if I am listening to music in iTunes it just goes into a looping drone, (not a nice sound I can tell you).
I was wondering if anyone else has had similar problems. I have been simply editing text in an AE comp and bang the system hangs. This only seems to happen when I am using After Effects. I have Gridiron Nucleo installed but I don't have it switched on, since it hasn't been playing too well. I also have a Blackmagic card and an internal raid system.
I am running the latest version of Tiger on the G5 and have all software up to date. I might have to upgrade to Leopard as I just don't trust it anymore. This has happened enough times for me to now be totally on edge when I am using the system with After Effects CS3. I have a Mac Pro and this just works beautifully when running AE CS3
Any thoughts would be welcome
all the best
richard

Actually it has happened before and I don't think I was editing text. So I am not entirely sure that was the culprit. Put it this way I can run Photoshop, Illustrator, Cinema 4D, even After Effects 7 without these problems. However I have started to steer clear of the machine and use the Intel Mac solely as I don't really have time for crashes if you know what I mean. Also it is slow in comparison which isn't surprising but it really seems like treacle compared to the quad core mac.

My laptop hard drive crashed, used to have lion now it is back to snow leopard. how do i get it back to lion again?

my laptop hard drive crashed, used to have lion now it is back to snow leopard. i lost all of my info, music, pictures, etc. how do i get it back to lion again? this is very frustrating because i paid $30 to download it and now i am unable to have it again.

If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

Created files in trail version now having issues using file in CS3

Hi Everyone,
Hopefully someone can answer my question. I don't have much experience with Dreamweaver, so any help would be greatly appreciated. I downloaded the free trail version of Dreamweaver CS5.5 and starting creating a new site with it. My trial version has ran out so I would like to finish the files using the Dreamweaver CS3 that I currently own. I'm able to open the files and move things around. However, when I went to the draw an new AP Div, I draw the box and it just disappears. The new div labeled #apDiv 7 shows up under CCS Styles panel but I can't get the actually box to show up on the screen even when changing the attributes on the #apDiv 7 under the CSS Rule Definition Box. I can create a new document in CS3 and draw an AP Div just fine. I'm just not sure why the files I created in the trail version are not allowing me to add this element to the layout.
Thank you.

First thing.When you post a question here it helps immensely if you post a link to the page or the code from it if it isn't online.
Working strictly in APDivs is hardly the way to build a page/site anymore. As you have seen it isn't easy or functional.
In the CSS panel there are attributes listed for the APDiv and should show the positioning X and Y as well as the width and height. If you go into your CS3 preferences, there is a tab for APDiv dimensions and location defaults.
But as I said, APDivs are a pain because you constantly have to adjust margins and padding to make them work with the content inside and stay where you want them, and when you're dealing with monitors between 1024 and more than 2300 pixels across, a page full of APDivs can become scattered all over the place on a wide screen browser.

How can I do to use my adobe cs3 taken from my old powewrbook to my new Imac?

How can I do to use my adobe cs3 taken from my old powewrbook to my new Imac?

Well, sorry to bring you the bad news, but you can stop right there. CS3 is not compatible with OSX 10.8 or 10.9.
Mylenium

Crash using Bridge

Again problem with camera raw in Bridge.
Many times, clicking on done after some modifications on RAW files, the system crash.

Ok Barbara,
I've downloaded Combo updater.
I didn’t found files like com.adobe.bridge.plist in librery/prferences, maybe I made a wrong search?
In finder/application I found what s shoved in the enclosure.
The problem unfortunately is not fixed.
BR
Max
Il giorno 24/apr/2012, alle ore 17:06, Barbara B. ha scritto:
Re: Crash using Bridge
created by Barbara B. in Photoshop Elements - View the full discussion
Okay, then it's not a clone. TM only restores documents/settings/etc, not your system.
Here's what I would do. Go here and download the combo updater for 10.7.3:
http://support.apple.com/kb/DL1484
Then run that. Repair permissions.
Now go to your username>library>preferences and delete everything that is anything like com.adobe.bridge.plist (there may be more than one and some may have numbers). Also any lockfiles with the same name. This library file is hidden in 10.7. Option click the Go menu in the Finder and it will appear below the little house for your user account. While you're in there, go to the Saved Application States folder and delete anything in there relating to PSE or bridge.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4357273#4357273
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4357273#4357273. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

What is the rendering engine used in Dreamweaver CS3

What is the rendering engine(aka layout engine) used in DW
CS3?
and which of the current browsers is using(or being based on)
this engine?

old9 wrote:
> What is the rendering engine(aka layout engine) used in
DW CS3?
> and which of the current browsers is using(or being
based on) this engine?
I'm not sure, but I think that the rendering engine is
Dreamweaver's
own. Before DW CS3, the aim was to emulate Internet Explorer
as closely
as possible. CS3 no longer does that, but attempts to render
pages as
closely to the W3C standards as possible. What you see is
probably
closest to what you would get in Firefox, but it's not based
on Mozilla.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

My flashplayer constantly crashes using Firefox!! What's the deal?

My flashplayer constantly crashes using Firefox!! What's the deal?

Follow the instructions here: http://forums.adobe.com/thread/1343084
That will do a COMPLETE "clean install".
After that, if it still stops, it's in your connection.

Using Premiere Pro CS3 When exporting as flash file poor picture quality

I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

Thanks for the reply.
The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
Thanks
Bill Bennett
Date: Fri, 2 Sep 2011 07:33:04 -0600
From: [email protected]
To: [email protected]
Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
Computer playback generally prefers square pixels. Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
See if that helps.
>

I am using a licensed CS3 Chinese Version and Illustrator shows question mark on the menu bar. iMac,

I am using a licensed CS3 Chinese Version and Illustrator shows question mark on the menu bar.
iMac, OS X Mountain Lion (10.8.2)

$$$/_MBAR/Mnu showing in Menu Bar - IllustratorHints
Mylenium

Safari crashes used with maverick

Safari crashes used with maverick

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

PDF with comments crashing, using InDesign CS3

I'm using OS10.6 and switching back and forth between Acrobat Pro 9.3.4 and InDesign CS3 5.0.4. I have Firefox running too, as well as Bridge and Word.
The PDF was originally made by me. I email it to my client and she adds comments using her Windows PC - I don't know any more details. She then Saves As and emails back to me.
I then open the PDF with comments and start to work through them, making amendments in InDesign, and then marking the comment with a checkmark. The PDF seems to randomly crash - sometimes it will work fine for a while, sometimes it just won't and crashes each time I open it. As a result of this random crashing, I'm saving after every comment I process to keep track of what comments I've done. (EDIT) Sometimes after the crash none of the comments are checked, despite me checking them and saving the file. V frustrating and time consuming.
Any ideas?? Thanks.
Message was edited by: agreen01

There is a feature in interactive PDF called Show/Hide fields which may or may not give you what you want. You can create a button of an image or other object which will make another object (button) appear. Do a Google search on "Show Hide Field InDesign Tutorial"

Indesign CS3 Crash using Leopard 10.5

I installed Leopard 10.5 last night and my Adobe InDesign (version 5.0) program crashes everytime I try to open it. My other Adobe CS3 programs seem to be working fine. Adobe's website says there are compatibility problems with some elements of Adobe CS3, but claims that InDesign is compatible with Leopard. I am on vacation in New York and don't have access to my Adobe discs to reinstall the program. Is anyone else having this same problem? Are there any patches I could download to fix it? Help!

I've tested InDesign 5.01 without problem on my aluminium Intel iMac (with Leopard installed). Several users have noted on Adobe blogs that they have encountered problems with the Hide function after upgrading. Quick Look doesn't work with ID files, reportedly because InDesign stores its previews as bitmaps, the resolution being set by ID's File Handling Preference - something Adobe will need to update for Quick Look.

Lightroom Crash on Import with CS3 installed

The last two days, I have been importing fairly large shoots from CF cards with Lightroom (Yesterday 147, today 79). In both cases I have received the Adobe Photoshop Lightroom has encountered a problem and needs to close.." message; twice today. I installed Photoshop CS3 Release yesterday and now I have Bridge trying to import the same set of photos. I noticed the Bridge import dialog today after LR crashed. By sending off the debug message and restarting LR I can finish the import eventualy. It shouldn't be this way and wasn't before I installed release CS3 (I had had LR and Beta CS3 on my machine with none of these problems.

Hi Holley,
Just back from a long weekend, hence the delay in replying..apologies.
Since I have now fixed the problem, I cant remember exactly how I sorted it, because I just stumbled through the various menus until I found the right solution! But, heres what I think I did:
Open TweakUI.
Open the drop down menu next to My Computer.
Click on Handlers.
In the window next to the menu, highlight Open folder to view files using Windows Explorer.
Click Edit.
Tick whichever boxes/tasks you would like to add to this folder. Obviously, the last one, Digital Images, will be one of them!
Click OK.
Thats it!
Note: There is no option to Take no Action. Once you have added any of the menu items, this option is added automatically by TweakUI.
Now, when you put a card in your card reader, the window should open with the option, Open folder to view files.
If this isnt working, reply and Ill try again.
HTH.
D.

SplitterPanelWidget crash using kBindAll in CS3

Similar Messages

Maybe you are looking for