Splitting audio from separate browser tabs or instances to different soundcards

Hi,
I would like to be able to separate the audio being played by flash  media player when there are two tabs playing different streams in  Firefox (or another browser).
Frustratingly, Adobe Flash Player doesnt offer any choice of the  sound card to route to (it always chooses the windows default) and  different instances of flash players all route the audio to the same 1  instance of Flash Player in Windows Audio config.
I have tried a few ideas without success:  running two completely  separate instances of firefox,  installing Safari to see if its possible  to configure the FlashToHTML5 extention(WebKit2webprocess.exe).   Multiple instance sof firefox use the same Flash player as mentioned,  and the FlashToHtml5 plugn works nicely but again it doesnt seem to be  possible to run instances for each tab or change the sound card.
Thanks for any ideas or suggestions to try.

**Bump**

Similar Messages

  • Splitting Audio From Video

    Hello
    I'm having trouble splitting audio from video. I currently have Final Cut Pro 6 from the final cut studio package, and my issue is that my audio is not synchronized with my video. The audio is coming in too early for the video and the voices of the people in the video do not match up. How can I fix this problem? How can I move the audio without moving the video as well?

    Select the clip and hit command L to separate the tracks.
    The real issue is why the footage is out of sync.

  • Split audio from hdmi

    Hi there,
    I'd like to replace my first gen Apple TV with a new one.
    The problem is the lack of analog audio outputs.
    Currently I connect to my tv with hdmi and to my hifi with phono plugs.
    The new Apple TV only has hdmi and digital audio out which my hifi doesn't ....
    Is there a way I can split the audio out of the hdmi so I can play iTunes through the hifi with the TV switched off?
    Cheers Lizardpoint

    I'm not aware of any cables that split audio from HDMI and in any case it would still be digital audio. You might want to think about one of the items below and use the optical cable.
    DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

  • Split audio from video doesn't split video at the same point ?

    When I split the audio from a video in GarageBand I would like the video to be split at the same point (so that I can insert audio in between without everything getting out of sync).
    Is this possible?
    (I don't want to use iMovie since that turns my 150 MB mov file into a 8 GB file..take ages to import)
    The reason I want to insert audio in between video fragments is that I am creating an audio description of a tv series for a blind friend. I watch the video, pause that, and describe. Then continue.
    If I can split both the video and "audio from video" at the same point and drag those to the right, so there's room to record something in between (then in the end I'll just drag it all so that the parts join up, delete the video and merge the audio. I hope.)
    Thanks in advance!!

    I figured out how to reset the Youtube video upon hiding thanks to Heathrowe's answer and FigFrance's contribution to the thread found here:
    https://forums.adobe.com/message/4979969#4979969
    The secret was adding .empty() to my video container.  Here is my functioning button code:
    Show Video:
    //code to embed youtube into symbol
    var youtube = $("<iframe/>");
    sym.$("video").empty().append(youtube);
    youtube.attr('type', 'text/html');
    youtube.attr('width', '640');
    youtube.attr('height', '360');
    youtube.attr('src', 'https://www.youtube.com/embed/MyFv6UKsW70?rel=0');
    youtube.attr('frameborder', '1');
    youtube.attr('allowfullscreen', '0');
    // Show an element
    sym.$("video").show();
    Hide Video:
    sym.$("video").empty();
    // Hide an element
    sym.$("video").hide();
    Brandon

  • Capture audio from separate device

    Is it possible to capture from a camera, but record the audio at the same time from a different audio device, e.g. soundcard?
    (My camera does not have a separate audio input with reasonable quality, so one could save from having 2 separate files by recording video from camera plus audio from soundcard. I'm not sure if that would really work due to latency problems, but I'd like to give it a try if possible.)
    Thanks!

    My practice is to capture sound separately using an hard disc recorder,from two to twenty-four tracks, and to combine this with the video in Premiere Pro. I use the sound track on the tape to achieve synchronization (which is very easy in Premiere Pro). If the room is small (<100 feet) I can use an on-camera microphone. For best results I use a wireless feed from the recorder to the camera.
    It's important to use a digital recorder, preferably at 48KHz sampling speed (you can convert from 44.1 or something else, but the speed may slip). An analog source, like a cassette deck, varies too much in speed, often more than 5%, to be useful. The sync slip is usually less than 3 frames per hour of recording. Most digital recorders have a digital output which can be captured directly by the computer through firewire or USB. If your only choice is an analog sound card, don't bother - too noisy and bad timing.

  • Splitting Audio From Video from one video file

    I used to use cs4 and when i had a video and dragged it onto the timeline you could right click and unlink the audio from the video.
    i now have cs5 and when i click unlink nothing happens, is there another way to do this or atleast somehow mute the audio in the video clip?

    well i had just realized that premiere pro is sticking my audio files in the fifth audio column. but it wont allow my to move it to audio one, do you know how i could do that?
    This is due to the differences in channel-count between your Audio Stream, and those other Audio Tracks. PrPro requires that the channel-count match. See this ARTICLE for more details.
    Good luck, and hope that explains why you see, what you see.
    Hunt

  • Opening linked documents in separate browser tabs

    How can I configure Adobe Reader to open a secondary PDF in a new tab from a primary PDF instead of the secondary replacing the primary in the same tab/window?
    If I use Foxit Reader with the same PDFs and the same IE the links from the primary PDF open in new tabs in IE.
    If I use Adobe Reader the links from the primary PDF open in the same tab and replace the primary.
    I'm using IE 8 and Adobe Reader 8.

    Hi,
    PCs with Internet Explorer are effectively opening Word within the browser using a Windows-only technology called OLE.
    There is a Word plugin but it's not a full featured Word document viewer.
    There are a couple of things that can be done to make life easier though. The simplest thing is that you can double click the icon in the Safari downloads window to launch the file, so there's no need to hunt down the file on your Desktop.
    Another more technical thing that can be done is to attach a Folder Action to your Desktop to instruct the Finder to automatically launch Word files as they are created there. I use the same idea to launch certain files from a work website.

  • How to split audio from video clip

    Title said it all.
    Thanks

    Command + L does nothing. Any other ideas? What I saw in a tutorial was that they selected a clip, then did some key sequence and it split out the audio track from the video. The audio then showed up as a green section right below the video track. They were doing this to delete the audio. They would split it, then select the audio track, then delete it. I realize I can drop the audio level, but this seemed like an interesting option.
    Thanks

  • Split Audio from Video?

    I am trying to edit a video and is there a way that I can cut out video and move it to another location in the timeline WITHOUT touching the audio?  Whenever I use the razor tool to cut out video, it splits the audio as well.  How do I move video around my timeline without the audio being split or moved?  Thanks.

    Select the track your clip is on and hold ALT when razoring and moving around.

  • How do I get firefox version 36 to play from audio from our selected default program and not the embedded quicktime player?

    In our newsroom environment, staff prefers to have MP3s from various download sources open directly in an outside program's window (in this case Goldwave is the preferred program). That being said, with the newer version (36 specifically) the behavior of the program has changed so that MP3s are opening in a separate browser tab, regardless of the preferences in the "Applications" window of the Options as well as the program defaults within Windows. Previous adjustments made to about:config media.windows-media-foundation.enabled as well as media.directshow.enabled and setting to "False" no longer solve this issue.

    hi tjh1211, please leave "media.windows-media-foundation.enabled" and "media.directshow.enabled" on their default value and switch "media.play-stand-alone" to false instead...

  • IMovie audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !

    iMovie 11  audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
    I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
    The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
    I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.

    I have a fix - or rather, a workaround.
    WARNING: It is lengthy, but still far better than starting a new project from scratch.
    I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
    ...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
    It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
    This will require:
    A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
    1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
    2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
    3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too,  as they will be extremely helpful later.
    4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
    This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
    5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
    You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
    Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
    We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
    VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
    I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
    6.) Once you are done with this, export your newly pieced together audio track.
    7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
    8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
    9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
    Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
    YOU'RE FINALLY DONE!!!
    I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
    DON'T USE IMOVIE EVER AGAIN.
    I hope this helped!

  • Is Mobile Safari's in-app multitasking (audio stream in one tab, browsing in another) gone for good?

    I cannot remember the last iOS version this feature actually worked, but in the past, I used to be able to open a tab in Mobile Safari, begin streaming audio from a website, pinch in to bring up standard UI again, and then open up another tab within Safari itself and continue to browse the web. All the while the streaming audio is still playing in the background.
    Now (and actually for the last few iOS versions, it's been a while), you cannot browse Safari while listening to a Safari audio stream at the same time. To me this makes no sense at all, because it's just a simple backgrounding concept. I can go off and use any other app on my phone, but not Safari itself.
    There ARE a few ways to kind of trick Safari into allowing you to browse and listen, but it's a poor workaround. You can go to the website, tap-and-hold on the stream URL, then select Open in Background. Doing so will begin the stream and keep you in the current webpage and then allow you to open more tabs.
    HOWEVER, if you ever select that audio stream tab, you can't control it consistently, and most of the time you'll get stuck in that tab and your solution is broken.
    For YEARS I've been waiting for Apple to fix this silly limitation with each new iOS release, but every time I find that it's never fixed. I'm just surprised that I don't hear more people complaining about it, because it's been a huge source of frustration for me for so long.
    Does anyone else experience this frustration or know if this is intentional (which would be enormously depressing if Apple purposely designed these functions) or if there are any better solutions to it than what I've come up with?

    Thanks for the heads up.
    Odd that I can't just email their support department.
    I'll post back with my results.

  • Open URL from Java in a new browser tab

    Hi OTN,
    Surprisingly can't find the implimintation.
    In an ADF managed bean I retrieve String url. I need to open a new browser tab with this url.
    Found this thread Open a url in a new window in the backing bean which shows using javascript "service.addScript(facesContext, "window.open(http://www.google.coml)");".
    But in my case in doesn't work. The code is executed, but nothing happens. Maybe because the bean is called from a taskflow inline popup.
    ADF 11.1.1.4
    Thanks.

    Well, I'm afraid that is not an option.
    The goButton is in a table row. There are lots of rows so if I use EL for Destination attribute the URL would be retrieved for each of rows.
    The method of URL retreiving is heavyweight operation which includes calling plsql functions, working with strings and others. So if I do it for each table row my application hungs and then I receive an exception of CPU usage.
    That's why I switched to normal commandButton witch actionListener which retrieves url on click - only once. So I need to open URL from Java.

  • Why is Firefox opening a separate browser window for each link instead of a new tab in the current browser window?

    Suddenly firefox has started opening a new, separate browser window for every link and thing I open. It used to just open a new tab in the current browser. I must have closed down 15 browsers when trying to get back to a previous web page - the back button doesn't work when each click leads to a new window opening! I went into options and my settings have not changed, they still say "open new tab" for links. This just started happening out of the blue today. What's up?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Separate audio from video - I want BOTH an audio and video file

    Hi,
    I would like to separate audio from video - I want BOTH an audio and video file.
    I don't think this can be done without additional software, but if it can, pointing me in the right direction would be much appreciated.
    Brandon

    You need Quicktime 7.6 Pro. Control+J to bring up the property window. In the property window is an extract button. Click on either the video or audio and click to the extract button.
    You'll find Quicktime 7 in your Utilities folder. If Quicktime 7 isn't install in the Utilities folder you need to install it from you OS installation disk, in the optional installations folder.
    If you don't have Quicktime Pro you need to buy it from the Apple store.

Maybe you are looking for

  • Drag and Drop Option

    I wanted to know if there is an option for Drag and Drop in Captivate 6.

  • ORA-06502: PL/SQL: numeric or value error:10grel2 htmldb 2.0

    Hi, Here is what Im trying to do : 1. I get the content of a web site (using UTL_HTTP) and I store it within a table in a clob column. 2. I try to display it in HTMLDB using many methods ( Simple query in SQL commands , as a report or as a dynamic pl

  • Cannot mount root during Solaris install on SPARCengine ULTRA axi

    I use boot cdrom which sucessfully formats swp partition and copies files to hd. But then when I reboot I get the following: SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 440MHz), PS/2 Keyboard OpenBoot 3.10.10 ME, 512 MB memory installed, Serial #106

  • STO return delivery in inbound or outbound monitor

    Hi all, When you create a return for a STO you create the delivery with VL10B. To me it seems logical that the delivery should appear in the inbound delivery monitor VL06I, however it appears in the outbond monitor VL06O. Any way to change this? Rega

  • Restoring a Hot backup using RMAN on a different server.

    Hi we are using oracle 10.2.0.4.0 on solaris 10 and using a separate catalog for RMAN backups. we have taken a production db Hot backup as follows level 0 backup on 28 th dec. level 1 on 29, level 1 on 30 and level 1 on 31 st. now today in the month